A2osX/SYS/KERNEL.S.MEM.txt

NEW
PREFIX /A2OSX.BUILD
AUTO 4,1
*--------------------------------------
ZPMemMgrSPtr 	.EQ ZPMEMMGR			Pointer To Slot selected
ZPMemMgrTmp1	.EQ ZPMEMMGR+2
ZPMemMgrSize	.EQ ZPMEMMGR+4
ZPSListID		.EQ ZPMEMMGR+6
ZPSListIBlkPtr	.EQ ZPMEMMGR+8
ZPSListDBlkPtr 	.EQ ZPMEMMGR+10
ZPSListKeyPtr	.EQ ZPMEMMGR+12
ZPSListDataPtr 	.EQ ZPMEMMGR+14
*/--------------------------------------
* # GetMem0
* **In:** 
*  Y,A = Size Requested
* **Out:**
*  CC : success
*   YA = PTR to Mem (ZERO Initialised)
*	X = hMem
*  CS :
*   A = EC
*\--------------------------------------		
K.GetMem0		ldx #S.MEM.F.INIT0
				.HS 2C					bit abs
*/--------------------------------------
* # GetMem
* **In:** 
*  Y,A = Size Requested
* **Out:**
*  CC : success
*   YA = PTR to Mem (Uninitialised)
*	X = hMem
*  CS :
*   A = EC
*\--------------------------------------
K.GetMem		ldx #0
				
MEM.GetMem.YAX	stx Mem.ReqFlags
				sta ZPMemMgrSize+1

				tya
				bit #$0F				16 bytes aligned ?
				beq .10					yes, request it	
				
				and #$F0				align on 16 bytes
				clc
				adc #$10
				bcc .10
				inc ZPMemMgrSize+1
				
.10				sta ZPMemMgrSize
				
				>LDYAI Mem.Table
				>STYA ZPMemMgrSPtr
				
				ldx #0					Current slot=0

				bra .4					skip slot 0, Check if some free slot to reuse first
				
.1				inx						move to next slot
				jsr Mem.NextSlot
				lda (ZPMemMgrSPtr)		Get Flags
				bmi .4					in use ?
				
.2				lda Mem.ReqFlags		Found an empty slot
				and #S.MEM.F.ALIGN		is request needs a page align ?
				beq .3
				
				ldy #S.MEM.PTR
				lda (ZPMemMgrSPtr),y	get LO of PTR
				bne .4					not page-aligned
				
.3				ldy #S.MEM.LEN
				lda (ZPMemMgrSPtr),y	get LEN of this block
				cmp ZPMemMgrSize		compare with requested size
				bne .4
				
				iny
				lda (ZPMemMgrSPtr),y
				cmp ZPMemMgrSize+1
				beq .7					requested size matches slot size !!!
				
.4				cpx Mem.LastSlot		any other slot to check?
				bne .1					last one, create a new slot
				
*-------------- Create a New SLOT
				lda Mem.ReqFlags
				and #S.MEM.F.ALIGN		is request needs a page align ?
				beq .6
				
				lda Mem.Free			target PTR will be page aligned ?
				sec
				sbc ZPMemMgrSize
				beq .6					yes, allocate
				
				tay						no, reserve a free slot to fill gap
				lda #0
				jsr Mem.AddSlot			X = new slot
				bcs .9
				
.6				>LDYA ZPMemMgrSize
				jsr Mem.AddSlot			X = new slot
				bcs .9
				
*-------------- Reuse this SLOT

.7				lda Mem.ReqFlags		get requested flags
				ora #S.MEM.F.INUSE		mark as in use
				sta (ZPMemMgrSPtr)
				
				and #S.MEM.F.INIT0
				beq .8

				ldy #S.MEM.PTR
				lda (ZPMemMgrSPtr),y	ZPMemMgrSPtr already set
				sta .12+1
				iny
				lda (ZPMemMgrSPtr),y
				sta .12+2
				
				lda ZPMemMgrSize
				eor #$ff
				tay						y=not lo count
				
				lda ZPMemMgrSize+1
				eor #$ff				a=not hi count			
				
				phx
				
				ldx #0
				
.11				iny
				bne .12
				inc
				beq .13
				
.12				stz $ffff,x
				inx
				bne .11
				
				inc .12+2
				bra .11
				
.13				plx

.8				lda #0
				ldy #S.MEM.BIN
				sta (ZPMemMgrSPtr),y
				
				inc						Mark this slot used by one process
				ldy #S.MEM.REFCNT
				sta (ZPMemMgrSPtr),y
				
				ldy #S.PS.PID
				lda (pPs),y
				ldy #S.MEM.OWNERPID
				sta (ZPMemMgrSPtr),y
				
				ldy #S.MEM.PTR
				lda (ZPMemMgrSPtr),y
				pha
				iny
				lda (ZPMemMgrSPtr),y	A = HI PTR
				ply						Y = LO PTR	
				clc						X = Current hMem
				
.9				rts						
*--------------------------------------
Mem.ReqFlags	.BS 1					store requested Flags
*--------------------------------------
* Mem.AddSlot
*  In:
*   Y,A = Requested size
*  Out: 
*--------------------------------------
Mem.AddSlot  	>STYA ZPMemMgrTmp1		save req size
				ldx Mem.LastSlot		
				inx
				beq .99					> 255 ERR:OUT OF SLOT
				
				lda Mem.Free			Compute base PTR=FREE-REQ size
				sec
				sbc ZPMemMgrTmp1
				tay						save new Mem.Free LO
				lda Mem.Free+1
				sbc ZPMemMgrTmp1+1
				pha						save new Mem.Free HI				

				cpy Mem.LoMem
				sbc Mem.LoMem+1
				bcc .98					ERR out of mem

				jsr Mem.NextSlot		X,Y unmodified
				
				tya						get back Mem.Free LO
				
				ldy #S.MEM.PTR
				sta Mem.Free			set as system Mem.Free value
				sta (ZPMemMgrSPtr),y	store is as base address of new slot
				iny
				pla						get back Mem.Free HI
				sta Mem.Free+1
				sta (ZPMemMgrSPtr),y

				iny
				lda ZPMemMgrTmp1		get requested size
				sta (ZPMemMgrSPtr),y	setup slot LEN
				iny	
				lda ZPMemMgrTmp1+1
				sta (ZPMemMgrSPtr),y

				stx Mem.LastSlot		mark this slot allocated
				clc
				rts
				
.98				pla						discard new Mem.Free HI
				
.99				lda #K.E.OOM
				sec
				rts	
*--------------------------------------
Mem.NextSlot	lda ZPMemMgrSPtr
				clc
				adc #S.MEM
				sta ZPMemMgrSPtr
				bcc .8
				inc ZPMemMgrSPtr+1
.8				rts								
*/--------------------------------------
* # FreeMem
* **In:**
*  A = hMem To Free
* **Out:**
*  none.
*  (X,Y unmodified)
*\--------------------------------------
K.FreeMem	    phy
				tay
				
				beq *					Slot=0, reserved by Kernel
				
				jsr K.GetMemByID		X unmodified
				lda (ZPMemMgrSPtr)
				bpl .9					In use ?
				
				ldy #S.MEM.REFCNT
				lda (ZPMemMgrSPtr),y	Get count of those referencing this hMem
				dec						only one left ?	
				sta (ZPMemMgrSPtr),y
				bne .8					no, must be a code segment loaded several times
				
				lda #0					mark this slot as free
				sta (ZPMemMgrSPtr)

				ldy #S.MEM.BIN
				lda (ZPMemMgrSPtr),y	Any BINPATH to discard ?		
				beq .1
				
				jsr K.GetMemByID		X unmodified
				lda (ZPMemMgrSPtr)
				bpl *					***MUST BE ALLOCATED***
				
				lda #0					mark BINPATH slot as free
				sta (ZPMemMgrSPtr)
				
.1				lda Mem.LastSlot
				beq .8
				
				jsr K.GetMemByID		X unmodified
				lda (ZPMemMgrSPtr)
				bmi .8					used, exit

.2				dec	Mem.LastSlot		free! get previous....
				beq .3					empty list: go set Mem.Free=Mem.HiMem
				
				lda Mem.LastSlot
				jsr K.GetMemByID		X unmodified
				lda (ZPMemMgrSPtr)
				bpl .2					free again! loop
				
				ldy #S.MEM.PTR
				lda (ZPMemMgrSPtr),y	set Mem.Free... 
				sta Mem.Free
				iny
				lda (ZPMemMgrSPtr),y
				sta Mem.Free+1

.8				ply
				clc
				rts
				
.3				>LDYA Mem.HiMem
				>STYA Mem.Free
				bra .8
*--------------------------------------				
.9				ply						discard	saved Y

				lda $D000
				sta .91+1
				bit RRAMWRAMBNK2
				bit RRAMWRAMBNK2		
				
				jsr CORE.PSSelect0		Select PS0 for proper I/O devices
				
				jsr DRV.SYS.Control
				
				pla						Get PC and sub 2 for calling address
				sec
				sbc #2
				tay
				pla
				sbc #0

				>PUSHYA
				
				>LDYAI K.FreeMem.ERR
				>SYSCALL printf
				
.91				ldx #$ff				
				bit $C000,x
				bit $C000,x
				bra *
*--------------------------------------
K.FreeMem.ERR	.AZ "FreeMem:%H:hMem already freed."
*/--------------------------------------
* # GetMemPtr
* **In:**
*  A = hMem
* **Out:**
*  Y,A = PTR to MemBlock
*  (X unmodified)
*\--------------------------------------
K.GetMemPtr		jsr K.GetMemByID
				ldy #S.MEM.PTR
				lda (ZPMemMgrSPtr),y
				pha
				iny
				lda (ZPMemMgrSPtr),y
				ply
				rts
*/--------------------------------------
* # GetMemByID
* **In:**
*  A = hMem
* **Out:**
*  Y,A = ZPMemMgrSPtr = PTR to S.MEM
*  X unmodified
*\--------------------------------------
* Optimized for :
* Mem.Table is page aligned at $1800
* S.MEM is 8 bytes
*--------------------------------------
				.DO Mem.Table=$1800
				.ELSE
				!!!!!WARNING!!!!!
				.FIN
				.DO S.MEM=8
				.ELSE
				!!!!!WARNING!!!!!
				.FIN
*--------------------------------------
K.GetMemByID	sta ZPMemMgrSPtr
				lda /Mem.Table/8
				asl ZPMemMgrSPtr
				rol
				asl ZPMemMgrSPtr
				rol
				asl ZPMemMgrSPtr
				rol
				sta ZPMemMgrSPtr+1
				ldy ZPMemMgrSPtr
				rts
*--------------------------------------
* OLD CODE
*--------------------------------------
*				stz ZPMemMgrSPtr+1
*				asl
*				rol ZPMemMgrSPtr+1
*				asl
*				rol ZPMemMgrSPtr+1
*				asl
*				rol ZPMemMgrSPtr+1
**				clc						IMPLICIT
*				adc #Mem.Table
*				tay
*				lda ZPMemMgrSPtr+1
*				adc /Mem.Table				
*				sty ZPMemMgrSPtr
*				sta ZPMemMgrSPtr+1
*				rts
*/--------------------------------------
* # NewStr
* Create a new copy of this C-String
* **In:**
*  Y,A = Ptr to source C-String
* **Out:**
*  CC : success 
*   Y,A = PTR to String
*   X = hMem (PSTR)
*  CS : error
*   A = SYS error code
*\--------------------------------------
K.NewStr		>STYA .1+1
				>STYA .4+1
				
				ldy #0
				lda #0
				
.1				ldx $ffff,y
				beq .2
				iny
				bne .1
				inc
				inc .1+2
				bne .1
				
.2				iny						Add one for ending 0
				bne .3
				inc 
						
.3				jsr K.GetMem
				bcs .9
				>STYA .5+1
				
				phy
				pha
				
				ldy #0
				
.4				lda $ffff,y			
.5				sta $ffff,y
				beq .8
				iny
				bne .4
				
				inc .4+2
				inc .5+2
				bne .4
				
.8				pla
				ply
				clc
.9				rts				
*/--------------------------------------
* # SListGetByID
* **In:**
*  PUSHB = hSList
*  PUSHW = KeyID
*  PUSHW = Data Ptr
*  PUSHW = Key Ptr
* **Out:**
*  X,Y = Next KeyID
*\--------------------------------------
K.SListGetByID	>PULLW ZPSListKeyPtr
*/--------------------------------------
* # SListUpdateByID
* **In:**
*  PUSHB = hSList
*  PUSHW = KeyID
*  PUSHW = Data Ptr
* **Out:**
*  A = Key Length
*  X,Y = KeyID
*\--------------------------------------
K.SListUpdateByID	
				>PULLW ZPSListDataPtr
				>PULLW ZPSListID
				bra K.SListPullH
*/--------------------------------------
* # SListAdd
* **In:**
*  PUSHB = hSList
*  PUSHW = Key Ptr
*  PUSHW = Data Ptr
* **Out:**
*  A = Key Length
*  X,Y = KeyID
*\--------------------------------------
K.SListAdd		
*/--------------------------------------
* # SListLookup
* **In:**
*  PUSHB = hSList
*  PUSHW = Key Ptr
*  PUSHW = Data Ptr
* **Out:**
*  A = Key Length
*  X,Y = KeyID
*\--------------------------------------
K.SListLookup	
*--------------------------------------
				>PULLW ZPSListDataPtr
				>PULLW ZPSListKeyPtr
K.SListPullH	>PULLA
*/--------------------------------------
* # SListNew
* **In:**
* **Out:**
*  A=hSList
*\--------------------------------------
K.SListNew	
*/--------------------------------------
* # SListFree
* **In:**
*  A=hSList
* **Out:**
*\--------------------------------------
K.SListFree	
*--------------------------------------
				sta SETREADAUX
				sta SETWRITEAUX
				jsr X.SLIST
				sta CLRREADAUX
				sta CLRWRITEAUX
				rts
*/--------------------------------------
* # GetStkObjProp
* **In:**
*  A = hObject (AUX Memory)
*  Y = Property Index
* **Out:**
*  Y,A = Property Value
*\--------------------------------------
K.GetStkObjProp	phy
				sta SETREADAUX
				jsr K.GetMemPtr
				>STYA ZPMemMgrTmp1
				
				ply
				lda (ZPMemMgrTmp1),y
				pha
				iny
				lda (ZPMemMgrTmp1),y
				ply
				sta CLRREADAUX
				rts
*/--------------------------------------
* # NewStkObj
* **In:** 
*  Y,A = Size Requested
* **Out:**
*  CC : success
*   YA = PTR to Mem (Uninitialised)
*	X = hMem
*  CS :
*   A = EC
*\--------------------------------------
K.NewStkObj		ldx #SYS.GetMem
				.HS 2C					BIT ABS
*/--------------------------------------
* # FreeStkObj
* **In:**
*  A = hMem To Free (AUX Memory)
* **Out:**
*  none.
*  (X,Y unmodified)
*\--------------------------------------
K.FreeStkObj	ldx #SYS.FreeMem

MEM.GoStkObj	sta SETREADAUX
				sta SETWRITEAUX
				
				jsr	.1
				
				sta CLRREADAUX
				sta CLRWRITEAUX
				rts

.1				jmp (SYS.Kernel.JMP,x)
*/--------------------------------------
* # LoadStkObj
* Load a file in AUX memory (Stock Objects)
* **In:**
*  PUSHW = AUXTYPE (Handled by....
*  PUSHB = TYPE  ...
*  PUSHB = MODE  ...
*  PUSHW = PATH ...FOpen)
* **Out:**
*  Y,A = File Length
*  X = hMem of Loaded Object in AUX mem
*\--------------------------------------
K.LoadStkObj	>SYSCALL LoadFile
				bcs .99
				
				stx .8+1				Save MAIN hMem
				>STYA A2L				Save LEN temporarly
				
				jsr K.NewStkObj
				bcs .9
				stx .80+1
				>STYA A4L				Save Destination Address in AUX
				
				lda .8+1
				jsr K.GetMemPtr
				
				>STYA A1L				Save MAIN base Ptr
				
				pha						Add Allocated LEN
				tya
				clc
				adc A2L
				sta A2L
				pla
				adc A2L+1
				sta A2L+1				to get End address in A2L/H

				sec						Main To Aux
				jsr AuxMove
				
.8				lda #$ff				SELF MODIFIED
				jsr K.FreeMem			release MAIN memory
				
.80				lda #$ff				Returns AUX hMem
				rts
				
.9				pha
				jsr .8
				pla
				sec
.99				rts				
*--------------------------------------
MEM.GetKeyCharY	sta CLRREADAUX
				lda (ZPSListKeyPtr),y
				sta SETREADAUX
				beq MEM.IsDigit.9
				
MEM.IsIDValid	cmp #'.'
				beq MEM.IsDigit.8

				cmp #'_'
				beq MEM.IsDigit.8
				
MEM.IsDigitOrL	cmp #'z'+1
				bcs MEM.IsDigit.RTS
				cmp #'a'
				bcs MEM.IsDigit.8
				
MEM.IsDigitOrUC	cmp #'Z'+1
				bcs MEM.IsDigit.RTS
				cmp #'A'
				bcs MEM.IsDigit.8

MEM.IsDigit		cmp #'9'+1
				bcs MEM.IsDigit.RTS
				cmp #'0'
				bcs MEM.IsDigit.8

MEM.IsDigit.9	sec
				
MEM.IsDigit.RTS	rts
				
MEM.IsDigit.8	clc
				rts
*--------------------------------------
MEM.IsHexDigit	jsr MEM.IsDigit
				bcc .8
				
				cmp #'A'
				bcc MEM.IsDigit.9
				cmp #'F'+1
				bcc .1
				
				cmp #'a'
				bcc MEM.IsDigit.9
				cmp #'f'+1
				bcs MEM.IsDigit.RTS

				eor #$20			
.1					
*				clc
				sbc #'A'-11			cc so A->10 (11-CC)
				clc
				
.8				and #$0F					
				rts
*--------------------------------------
MEM.SetKeyCharY	sta CLRWRITEAUX
				sta (ZPSListKeyPtr),y
				sta SETWRITEAUX
				rts
*--------------------------------------
MEM.GetDataByte	sta CLRREADAUX
				lda (ZPSListDataPtr)
				sta SETREADAUX
				bra MEM.SetDataByte.1
*--------------------------------------
MEM.SetDataByte	sta CLRWRITEAUX
				sta (ZPSListDataPtr)
				sta SETWRITEAUX
MEM.SetDataByte.1				
				inc ZPSListDataPtr
				bne .8
				inc ZPSListDataPtr+1
.8				rts
*--------------------------------------
MEM.TXTPTR.GetNext
				sta CLRREADAUX
				lda (TXTPTR)
				sta SETREADAUX
				beq .9
				inc TXTPTR
				bne .9
				inc TXTPTR+1
.9				rts				
*--------------------------------------
MEM.PullP1P2P3	sec
				.HS 90					bcc
MEM.PullP1P2	clc
				>PULLW ZPPtr1
				>PULLW ZPPtr2
				bcc .9
				>PULLW ZPPtr3
.9				rts
*--------------------------------------
MAN
SAVE /A2OSX.SRC/SYS/KERNEL.S.MEM
LOAD /A2OSX.SRC/SYS/KERNEL.S
ASM