A2osX/SCMASM.30/SCMASM.S.EDIT..txt

NEW
  AUTO 3,1
*--------------------------------------
*    SOFT INITIALIZATION
*--------------------------------
SOFT   LDA /$1000   START SYMBOL TABLE AT $1000
SYMBOL.BASE .EQ *-1
       STA LO.MEM+1
       LDA #0
       STA LO.MEM
       STA AUTOLN.FLAG  TURN OFF AUTOMATIC LINE NUMBERS
       JSR IO.WARM  INIT SCREEN, CONNECT DOS
       JSR CLOSE.FILES
*--------------------------------
FAST   CLC          SET TO FAST LISTING SPEED
       .HS 24       (SKIP OVER SEC)
SLOW   SEC          SET TO SLOW LISTING SPEED
       ROR FLAG.SPEED    SET/CLEAR SIGN BIT
*--------------------------------
*    GET NEXT LINE
*--------------------------------
GNL
       LDX #$FF     INIT STACK
       TXS
       STX PASS     PASS=-1 IF NOT ASSEMBLING
       INX          MAKE X=0
       STX SCI.STATE    GET INTO "IMMEDIATE" STATE
       STX RPTCNT   CLEAR REPEAT COUNT
       STX MACRO.LEVEL
       STX PARAM.PNTR
       STX CHAR.PNTR
       STX PAGE.LENGTH  TURN OFF TITLING
       JSR READ.LINE
       JSR GNC.UC.START  GET FIRST CHAR OF LINE
       BEQ GNL        EMPTY LINE OR 1ST CHAR IS BLANK
       JSR CHECK.LETTER
       BCC .1       NOT A LETTER
       JSR SEARCH.COMMAND.TABLE
       JMP GNL
*---Test for single char cmds----
.1     LDY #CHARS.FOR.COMMANDS
       JSR SEARCH.CHAR.TABLES
       JMP GNL
*---" LINE, ECHO ALL CHARS-------
ECHO1  JSR CHO      SEND CHARACTER
ECHO.LINE
       JSR GNC      GET NEXT CHAR
       BCC ECHO1    NOT END YET
       RTS
*--------------------------------
*    SYNTAX ERROR
*--------------------------------
SYNX   LDY #QSYNX
       JMP HARD.ERROR
*--------------------------------
*    NUMBERED LINE
*--------------------------------
NML    JSR GNC.START  GET FIRST CHAR
       JSR DECN     CONVERT LINE NUMBER
       LDA DGTCNT   MUST BE 1 TO 5 DIGITS
       BEQ SYNX
       LDA SYM.VALUE+2
       ORA SYM.VALUE+3
       BNE SYNX     > 65535
*---Compact the numbered line----
       DEY          Backup to previous character
       JSR COMPACT.LINE
*--------------------------------
       LDX #1       COPY IN BINARY LINE #
.51    LDA SYM.VALUE,X
       STA CURLNO,X   SAVE HERE TOO, FOR AUTO-NUMBER
       STA WBUF+1,X
       DEX
       BPL .51
*--------------------------------
*    FIND LINE, OR PLACE WHERE IT SHOULD GO
*      LINE.START --> BEGINNING OF THIS LINE
*      LINE.END   --> BEGINNING OF NEXT LINE
*--------------------------------
       LDX #SYM.VALUE   POINT AT LINE NUMBER
       JSR SERTXT    FIND IT IF THERE
       SEC          GET LENGTH OF HOLE
       LDA LINE.END  WILL ALWAYS BE LESS THAN 256
       SBC LINE.START
       SEC          SUBTRACT LENGTH OF NEW LINE
       SBC WBUF     LINE SIZE
       BEQ .11      SAME SIZE EXACTLY
       STA MOVE.DISTANCE
       LDA #0
       SBC #0
       STA MOVE.DISTANCE+1
       BCC .6       NEW LINE LONGER THAN HOLE
*--------------------------------
*      NEW LINE SHORTER THAN HOLE
*--------------------------------
       CLC          COMPUTE TARGET TO MOVE UP TO
       LDA LINE.START
       ADC MOVE.DISTANCE
       STA A4L
       LDA LINE.START+1
       ADC MOVE.DISTANCE+1
       STA A4H
       JSR MOVE.TEXT.UP
       JMP .10      NOW HOLE IS RIGHT SIZE
*--------------------------------
*      ENLARGE HOLE TO MAKE ROOM
*--------------------------------
.6     CLC          (MOVE.DISTANCE) = -<#BYTES TO EXPAND>
       LDA PP       COMPUTE TARGET ADDRESS
       ADC MOVE.DISTANCE
       STA A4L
       LDA PP+1
       ADC MOVE.DISTANCE+1
       STA A4H
       LDA A4L       BE SURE THERE IS ROOM
       CMP LO.MEM
       LDA A4H
       SBC LO.MEM+1
       BCC MFER      NO ROOM!
       JSR MOVE.TEXT.DOWN
*---Adjust SRCP if needed--------
.10    LDA SRCP     If hole is above (SRCP),
       CMP LINE.END      then need to add MOVE.DISTANCE
       LDA SRCP+1
       SBC LINE.END+1
       BCS .11
       LDA SRCP
       ADC MOVE.DISTANCE
       STA SRCP
       LDA SRCP+1
       ADC MOVE.DISTANCE+1
       STA SRCP+1
*--------------------------------
*    COPY NEW LINE INTO THE HOLE
*--------------------------------
.11    LDX WBUF     LINE SIZE
       BEQ .14      NO NEW LINE TO COPY
       LDY #0
.12    LDA LINE.END   BACK UP POINTER TO END OF HOLE
       BNE .13
       DEC LINE.END+1
.13    DEC LINE.END
       DEX
       LDA WBUF,X
       STA (LINE.END),Y
       TXA
       BNE .12
.14    RTS
*--------------------------------
MFER LDY #QMEMFL        MEM FULL ERROR
     JMP HARD.ERROR
*--------------------------------
COMPACT.LINE
       LDX #4       Start storing at WBUF+3
       LDA #-1      Prime RPT pump
       STA RPTCNT
.1     STA RPTCHR
.2     INY          advance input pointer
       INC RPTCNT   (first time makes it = 0)
       LDA WBUF,Y   get next char
       AND #$7F     be sure its low ascii
       CMP RPTCHR   save as previous char?
       BEQ .2       ...yes, just count it
       PHA          save new character
*--------------------------------
       LDA RPTCNT
       BEQ .3
       JSR PROCESS.REPEAT.COUNT
*--------------------------------
.3     PLA          get new character
       BNE .1       ...not 00 terminator
       STA WBUF-1,X store terminator
       CPX #5       If only line number, make length 00
       BCS .4
       LDX #0
.4     STX WBUF
       RTS
*--------------------------------
PROCESS.REPEAT.COUNT 
       LDA RPTCHR
       CMP #' '
       BEQ .5       ...compress blanks in special way
       LDA RPTCNT
       CMP COMPRESSION.LIMIT
       BCS .2       ...enough to compress to 3 bytes
.1     LDA RPTCHR   spit out uncompressed chars
       STA WBUF-1,X
       INX
       DEC RPTCNT
       BNE .1
       RTS
*---Compress $C0 cnt char--------
.2     STA WBUF,X   store count
       LDA #$C0     Compression token
       STA WBUF-1,X
       INX
       INX
       LDA RPTCHR   repeated char
.3     STA WBUF-1,X
       INX
       LDA #0
       STA RPTCNT
       RTS
*---Compress blanks--------------
.4     SBC #$3F     Maximum blanks in one token
       STA RPTCNT
       LDA #$BF     $3F blanks
       STA WBUF-1,X
       INX
.5     LDA RPTCNT   Number of blanks left
       CMP #$40
       BCS .4       ...too many for one token
       ORA #$80     make into blank token + count
       BNE .3       ...always
*--------------------------------
SCAN.3.DECIMAL.NUMBERS
       LDX #6       FIRST CLEAR TO ZERO
       LDA #0
.1     STA A0L-1,X
       DEX
       BNE .1
       JSR SCAN.1.DECIMAL.NUMBER
       JSR SCAN.1.DECIMAL.NUMBER
***    JMP SCAN.1.DECIMAL.NUMBER
*--------------------------------
SCAN.1.DECIMAL.NUMBER
.1     JSR GNC
       BCS .2       END OF LINE
       EOR #$30     IS THIS A DIGIT?
       CMP #10
       BCS .1       NO
       TXA          SAVE X-REG
       PHA
       JSR DECN     CONVERT NUMBER
       PLA          RESTORE X-REG
       TAX
       LDA SYM.VALUE  STACK NUMBER
       STA A0L,X
       INX
       LDA SYM.VALUE+1
       STA A0L,X
       INX
.2     RTS
*--------------------------------
*    DECIMAL NUMBER INPUT
*--------------------------------
DECN   JSR BACKUP.CHAR.PNTR
       JSR ZERO.SYM.VALUE    CLEAR ACCUMULATOR
       STA DGTCNT
.1     JSR GNC       GET NEXT CHAR
       EOR #$30      CHECK IF DIGIT
       CMP #10
       BCS .5        NOT A DIGIT
       PHA          SAVE THE DIGIT
*---ACCUMULATOR * TEN------------
       JSR ASL.SYM.VALUE
       BCS .6       OVERFLOW ERROR
       LDX #3
.2     LDA SYM.VALUE,X   HI- TO LO-
       PHA
       DEX
       BPL .2       
.3     JSR ASL.SYM.VALUE
       BCS .6       OVERFLOW ERROR
       INX
       BEQ .3       DO IT TWICE
       PLA
       ADC SYM.VALUE
       STA SYM.VALUE
       PLA
       ADC SYM.VALUE+1
       STA SYM.VALUE+1
       PLA
       ADC SYM.VALUE+2
       STA SYM.VALUE+2
       PLA
       ADC SYM.VALUE+3
       STA SYM.VALUE+3
       BCS .6       OVERFLOW ERROR
*---ADD CURRENT DIGIT------------
       PLA
       ADC SYM.VALUE
       STA SYM.VALUE
       BCC .4
       INC SYM.VALUE+1
       BNE .4
       INC SYM.VALUE+2
       BNE .4
       INC SYM.VALUE+3
       BEQ .6       OVERFLOW ERROR
.4     INC DGTCNT   COUNT THE DIGIT
       BNE .1       ...ALWAYS
.5     RTS
.6     LDY #QER3    RANGE ERROR
       JMP SOFT.ERROR
*--------------------------------
*    GET NEXT NON-BLANK CHAR
*--------------------------------
GNNB JSR GNC.UC    GET NEXT CHAR IN UPPER CASE
     BCS .1        END OF LINE
     BEQ GNNB      BLANK
.1   RTS           RETURN
*--------------------------------
*      GET NEXT CHAR IN UPPER CASE
*--------------------------------
GNC.UC.START
       LDY #0
       STY CHAR.PNTR
GNC.UC JSR GNC      GET NEXT CHAR ANY CASE
       BEQ .1       SPACE OR <EOL>
       JSR ELIMINATE.CASE    MAP LOWER CASE TO UPPER CASE
       STA CURRENT.CHAR
       CMP #$FF     CLEAR CARRY, SET .NE.
.1     RTS
*--------------------------------
*    GET NEXT CHAR
*--------------------------------
GNC.START
       LDY #0       BEGINNING OF LINE
       .HS 2C       SKIP NEXT TWO BYTES
GNC  LDY CHAR.PNTR
GNC2 LDA WBUF,Y    GET CHAR
     AND #$7F
     STA CURRENT.CHAR
     BEQ .1        END OF LINE
     INY           BUMP POINTER
     STY CHAR.PNTR
     CMP #$20      SEE IF BLANK
     CLC           CARRY CLEAR SINCE NOT AT END
     RTS
.1   LDA #$20      RETURN BLANK
     CMP #$20      SET CARRY AND EQUAL STATUS
     RTS
*--------------------------------
*      BACK UP CHARACTER POINTER
*--------------------------------
BACKUP.CHAR.PNTR
       PHA          SAVE A-REG
       LDA CURRENT.CHAR
       BEQ .1       DO NOT BACK OFF THE END
       LDA CHAR.PNTR
       BEQ .1       DO NOT BACK BEYOND THE BEGINNING
       DEC CHAR.PNTR
.1     PLA
       RTS
*--------------------------------
*    GET NEXT TOKEN FROM SOURCE LINE
*--------------------------------
NTKN
       LDA RPTCNT
       BNE .3       IN A REPEATED CHAR LOOP
       JSR GNB      GET NEXT CHAR FROM SOURCE
       ASL          ...WEIRD WAY TO TEST SIGN BIT
       ROR          ...AND AS WELL AS 00
       BPL .4       ...NORMAL CHARACTER
       CMP #$C0     SEE IF BLANKS
       BCC .1       ...YES
       JSR GNBI     REPEAT TOKEN $C0 XX YY, GET XX
       STA RPTCNT
       JSR GNBI     GET YY (CHAR TO BE REPEATED)
       JMP .2       ...ALWAYS
.1     AND #$3F     BLANK COUNT
       STA RPTCNT
       LDA #$20     BLANK
.2     STA RPTCHR
.3     DEC RPTCNT
       LDA RPTCHR
.4     RTS
*--------------------------------
*    GET NEXT BYTE FROM SOURCE
*--------------------------------
GNB    LDY #0
GNBI
  .DO AUXMEM
       LDA MACRO.LEVEL
       BEQ .0       ...NOT IN A SKELETON
       >SYM LDA,SRCP
       .HS 2C       SKIP OVER LDA (SRCP),Y
  .FIN
.0     LDA (SRCP),Y
      >INCD SRCP
       BIT INFLAG   INSIDE BLOCKED .IN?
       BVC .3       ...NO
       PHA
       LDA MACRO.LEVEL
       BNE .25           INSIDE A SKELETON
       LDA INSAVE+4      REMAINING BYTES IN THIS BLOCK
       BNE .2            ...THERE ARE MORE
       ORA INSAVE+5
       BEQ .4            ...NO MORE IN THIS BLOCK
       DEC INSAVE+5
.2     DEC INSAVE+4
.25    PLA
.3     RTS
*---TRY TO READ ANOTHER BLOCK----
.4     PLA
       LDA INSAVE+6      REFNUM OF INB FILE
       STA SCI.IOB.RW+1
       LDA PP            STARTING ADDRESS
       STA SRCP
       STA SCI.IOB.RW+2
       LDA PP+1
       STA SRCP+1
       STA SCI.IOB.RW+3
       SEC
       LDA HI.MEM+1       NUMBER OF PAGES
       SBC PP+1
       STA SCI.IOB.RW+5
       LDA #0
       STA SCI.IOB.RW+4
       LDA #$CA          READ
       JSR SCI.MLI
       BCC .5            ...NO ERRORS
       CMP #5            END OF DATA?
       BNE PRODOS.ERROR  ...ERROR
.5     LDA SCI.IOB.RW+6
       STA INSAVE+4      # BYTES ACTUALLY READ
       LDA SCI.IOB.RW+7
       STA INSAVE+5
       BCC GNB           ...NOT END OF DATA
       LDA INSAVE+6      REFNUM
       STA SCI.IOB.CLOSE+1    FOR CLOSE CALL
       LDA #$CC
       JSR SCI.MLI
       BCS PRODOS.ERROR
       JSR RESTORE       END OF THE INBx FILE
       JMP ASM2
*--------------------------------
PRODOS.ERROR
       PHA
       JSR RESTORE.IF.IN.INBX
       PLA
       JMP SCI.ERROR
*--------------------------------
*      RETURN .CS. IF VALID CHAR
*             .CC. IF INVALID CHAR
*--------------------------------
CHECK.DOT.DIGIT.OR.LETTER
       CMP #'.
       BEQ CHECKS.OK
       CMP #'_'     allow underline in symbols too
       BEQ CHECKS.OK
CHECK.DIGIT.OR.LETTER
       JSR CHECK.DIGIT
       BCS CHECKS.OK
CHECK.LETTER
       CMP #'A
       BCC CHECKS.NOT.OK
       CMP #'Z+1
       BCC CHECKS.OK
CHECKS.NOT.OK
       CLC
       RTS
CHECK.DIGIT
       CMP #'0
       BCC CHECKS.NOT.OK
       CMP #'9+1
       BCS CHECKS.NOT.OK
CHECKS.OK
       SEC
       RTS
*--------------------------------
CHECK.COMMENT.CHAR
       CMP #'*      STAR?
       BEQ .1       YES
       CMP #';      SEMI-COLON?
.1     RTS
*--------------------------------
*    INITIALIZE FOR HARD ENTRY
*--------------------------------
HARD.INIT
       CLD
*---Establish LO.MEM & HI.MEM------
       LDA SYMBOL.BASE   SET UP LO.MEM
       STA LO.MEM+1
       LDA SCI.HIMEM.PAGE
       STA HI.MEM+1
       LDA #0
       STA LO.MEM
       STA HI.MEM
*---Init other parameters--------
       STA INCREMENT.VALUE+1
       STA PROMPT.FLAG
       STA INFLAG
       JSR STINIT     INITIALIZE SYMBOL TABLE
       LDA #10      SET AUTO-LINE-NUMBERING INCREMENT
       STA INCREMENT.VALUE
       LDA #990     SET AUTO-LINE-NUMBERING
       STA CURLNO   INITIAL VALUE
       LDA /990
       STA CURLNO+1
*---Print Heading----------------
       JSR IO.INIT   INIT TEXT, FULL WINDOW, ETC.
       JSR VERSION  Print Version Number
*--------------------------------
EMPTY.SOURCE.AREA
       LDA HI.MEM
       STA PP       EMPTY SOURCE AREA
       LDA HI.MEM+1
       STA PP+1
       RTS
*--------------------------------
Q.VERSION
          .DA #VERSION.LO+"0",#".",#VERSION.HI+"0"
*--------------------------------------
MAN
SAVE usr/src/scmasm.30/scmasm.s.edit
LOAD usr/src/scmasm.30/scmasm.s
ASM