A2osX/SYS/KERNEL.S.FILE.txt

PR#3
PREFIX /A2OSX.BUILD
LOMEM $A00
INC 1
AUTO 6
*--------------------------------------
* For All SYS.xxxx calls, X = #SYSCall
* Must be kept in X before calling
* PFT.Check
*/--------------------------------------
* # FOpen
* Open a file
* ## In :
*  PUSHW = AUXTYPE
*  PUSHB = TYPE
*  PUSHB = MODE
*   SYS.FOpen.R : if R and !exists -> ERROR
*   SYS.FOpen.W : if W and !exists -> CREATE
*   SYS.FOpen.A : Append
*   SYS.FOpen.T : Open/Append in Text mode
*   SYS.FOpen.X : Create if not exists
*  PUSHW = PATH (PSTR)
* ## Out : 
*  CC : A = hFILE
*  CS : A = EC
*\--------------------------------------
K.FOpen			jsr PFT.CheckPathSTK
				>PULLW K.MLI.PARAMS+1
				>PULLB K.FOpen.MODE
				>PULLB K.FOpen.TYPE
				>PULLW K.FOpen.AUXTYPE
				
				>MLICALL MLIGETFILEINFO
				bcc K.FOpen.10			Already Exists
				
				bit K.FOpen.MODE		Create if not exists ?
				bpl K.FOpen.9			No, return MLI error
				
				lda #S.FILEINFO.ACCESS.FULL				Yes, Create...
				sta K.MLI.PARAMS+3	Access
				lda K.FOpen.TYPE
				sta K.MLI.PARAMS+4	File type
				>LDYA K.FOpen.AUXTYPE
				>STYA K.MLI.PARAMS+5	Aux type
				lda #S.FILEINFO.STORETYPE.STD
				sta K.MLI.PARAMS+7
				
				ldx #3
.1				lda DATELO,x
				sta K.MLI.PARAMS+8,x
				dex
				bpl .1

				>MLICALL MLICREATE
				bcc K.FOpen.10
K.FOpen.9		rts

K.FOpen.10		>PUSHWI S.NODE.REG
				>PUSHBI S.MEM.F.INIT0
				jsr K.GetMem
				bcs K.FOpen.9
				
				>STYA ZPPtr1
				stx hFILE			
				
				jsr FILE.SetIOBUF
				bcs .98

				>MLICALL MLIOPEN
				bcs .98
				
				lda K.MLI.PARAMS+5	get ref_num
				ldy #S.NODE.REG.REF
				sta (ZPPtr1),y
				
				sta K.MLI.PARAMS+1	Next MLI Calls are REF_NUM based
				
				lda K.FOpen.MODE
				bit #SYS.FOpen.W
				beq .20					Write mode ?
				
				and #SYS.FOpen.A		Append ?
				bne .11					yes, go to end of file
				
				stz K.MLI.PARAMS+2
				stz K.MLI.PARAMS+3
				stz K.MLI.PARAMS+4
				>MLICALL MLISETEOF		no, reset size to 0
				bcs .98
				bra .20
				
.11				>MLICALL MLIGETEOF
				bcs .98
				
				>MLICALL MLISETMARK
				bcs .98
				
.20				lda K.FOpen.MODE
				and #SYS.FOpen.T		Text Mode ?
				beq .30
				
				lda #$FF
				sta K.MLI.PARAMS+2
				lda #$0D
				sta K.MLI.PARAMS+3
				>MLICALL MLINEWLINE				
				
.30				ldy #S.NODE.T
				lda #S.NODE.T.REG
				sta (ZPPtr1),y
				lda hFILE
				clc
				rts						CC
				
.98				pha						save MLI error
				lda hFILE
				jsr K.FCloseA.1
				pla						get back MLI error
				sec
				rts
*--------------------------------------
K.FOpen.MODE	.BS 1
K.FOpen.TYPE	.BS 1
K.FOpen.AUXTYPE	.BS 2
hFILE			.BS 1
*/--------------------------------------
* # FCloseA
* Close a file
* ## In :
*  A = hFILE
* ## Out :
*\--------------------------------------
K.FCloseA		jsr PFT.CheckNodeA
				sta K.FCloseA.2+1
				jsr K.GetMemPtrA
				>STYA ZPPtr1
				
K.FCloseA.1		ldy #S.NODE.REG.REF
				lda (ZPPtr1),y
				beq .1
				sta K.MLI.PARAMS+1
				>MLICALL MLICLOSE
				
.1				ldy #S.NODE.REG.IOBUF				
				lda (ZPPtr1),y
				beq K.FCloseA.2
				jsr K.FreeMemA
				
K.FCloseA.2		lda #$ff				Self Modified
				jmp K.FreeMemA
*/--------------------------------------
* # FReadA
* Read ONE byte from file
* ## In :
*  A = hFILE
* ## Out :
*  A = Byte Read
*\--------------------------------------
K.FReadA		jsr PFT.CheckNodeA
				ldx #MLIREAD
				bra K.FReadWrite.0				
*/--------------------------------------
* # FWriteAY
* ## In:
*  A = hFILE
*  Y = char
* # Out:
*  Y,A = Bytes Written
*\--------------------------------------
K.FWriteAY		jsr PFT.CheckNodeA
				sty K.FWriteAY.Buf
				ldx #MLIWRITE
K.FReadWrite.0	jsr FILE.SetupPrt1A
				>LDYAI K.FWriteAY.Buf
				>STYA K.MLI.PARAMS+2
				lda #1
				sta K.MLI.PARAMS+4
				stz K.MLI.PARAMS+5
				lda #4					Param Count = 4 for MLIREAD & MLIWRITE
				jsr A2osX.MLICALL
				bcs .9
				lda K.FWriteAY.Buf
.9				rts
K.FWriteAY.Buf	.BS 1		
*/--------------------------------------
* # FRead
* Read bytes from file
* ## In :
*  PUSHW = Dest Ptr
*  PUSHW = Bytes To Read
*  PUSHB = hFILE
* ## Out :
*  Y,A = Bytes Read
*\--------------------------------------
K.FRead			jsr PFT.CheckNodeSTK
				ldx #MLIREAD
				bra K.FReadWrite.1
*/--------------------------------------
* # FWrite
* ## In:
*  PUSHW = Src Ptr
*  PUSHW = Bytes To Write
*  PUSHB = hFILE
* # Out:
*  Y,A = Bytes Written
*\--------------------------------------
K.FWrite		jsr PFT.CheckNodeSTK
				ldx #MLIWRITE
K.FReadWrite.1	>PULLA
				jsr FILE.SetupPrt1A
				>PULLW K.MLI.PARAMS+4
				>PULLW K.MLI.PARAMS+2

				lda #4					Param Count = 4 for MLIREAD & MLIWRITE
				jsr A2osX.MLICALL
				bcs .9
				>LDYA K.MLI.PARAMS+6
.9				rts
*/--------------------------------------
* # FFlushA
* ## In:
*  A = hFILE
*\--------------------------------------
K.FFlushA		jsr PFT.CheckNodeA
				jsr FILE.SetupPrt1A
				>MLICALL MLIFLUSH
				rts
*/-------------------------------------
* # FSeek
* ## In:
*  PUSHW = OffsetHi
*  PUSHW = OffsetLo
*  PUSHB = From
*  PUSHB = hFILE
*\-------------------------------------
K.FSeek			jsr PFT.CheckNodeSTK
				>PULLA
				jsr FILE.SetupPrt1A
				>PULLB K.FSeek.FROM
				>PULLW K.FSeek.OFFSET
				>PULLW K.FSeek.OFFSET+2
				
				lda K.FSeek.FROM
				
*				cmp #SYS.FSeek.SET		=0
				
				bne .1
				stz K.MLI.PARAMS+2
				stz K.MLI.PARAMS+3
				stz K.MLI.PARAMS+4
				bra .8
				
.1				cmp #SYS.FSeek.CUR
				bne .2
				>MLICALL MLIGETMARK
				bcc .8
				rts
				
.2				cmp #SYS.FSeek.END
				bne .98
				>MLICALL MLIGETEOF
				bcs .9
				
.8				lda K.MLI.PARAMS+2
				adc K.FSeek.OFFSET
				sta K.MLI.PARAMS+2
				lda K.MLI.PARAMS+3
				adc K.FSeek.OFFSET+1
				sta K.MLI.PARAMS+3
				lda K.MLI.PARAMS+4
				adc K.FSeek.OFFSET+2
				sta K.MLI.PARAMS+4
				bcs .99					Offset out of range!			
				
				>MLICALL MLISETMARK

.9				rts

.98				lda #SYSMGR.ERRSYN
				.HS 2C					bit abs
.99				lda #SYSMGR.ERRFTB
				sec
				rts
*--------------------------------------
K.FSeek.FROM	.BS 1
K.FSeek.OFFSET	.BS 4			
*/--------------------------------------
* # FTellA
* ## In:
*  A = hFILE
* ## Out:
*   Y,A,X = Offset
*\--------------------------------------
K.FTellA		jsr PFT.CheckNodeA
K.FTellA.1		jsr FILE.SetupPrt1A
				>MLICALL MLIGETMARK
				bcs .9
				>LDYA K.MLI.PARAMS+2
				ldx K.MLI.PARAMS+4
.9				rts
*/--------------------------------------
* # FEOFA
* ## In:
*  A = hFILE
* ## Out:
*  CC : 
*   A=0 EOF
*   A !=0 NOT EOF
*  CS :
*\--------------------------------------
K.FEOFA			jsr PFT.CheckNodeA
				jsr FILE.SetupPrt1A
				jsr K.FTellA.1
				bcs .9
				>STYA K.FEOFA.MARK
				stx K.FEOFA.MARK+2
				
				>MLICALL MLIGETEOF
				bcs .9
				
				sec
				lda K.MLI.PARAMS+2
				sbc K.FEOFA.MARK
				bne .8
				lda K.MLI.PARAMS+3
				sbc K.FEOFA.MARK+1
				bne .8
				lda K.MLI.PARAMS+4
				sbc K.FEOFA.MARK+2
.8				clc
.9				rts
K.FEOFA.MARK	.BS 3
*/--------------------------------------
* # RemoveYA
*\--------------------------------------
K.RemoveYA		jsr PFT.CheckPathYA
				>STYA K.MLI.PARAMS+1
				>MLICALL MLIDESTROY
				rts
*/--------------------------------------
* # Rename
* Rename a file
* ## In :
*  PUSHW = New Name
*  PUSHW = Old Name
* ## Out :
*\--------------------------------------
K.Rename		jsr PFT.CheckPathSTK
				>PULLW K.MLI.PARAMS+1
				>PULLW K.MLI.PARAMS+3
				>MLICALL MLIRename
				rts
*/--------------------------------------
* # Stat
* Return information about a file
* ## In :
*  PUSHW = PTR to S.STAT buffer
*  PUSHW = PTR to Filename (PSTR)
* ## Out :
*\--------------------------------------
K.Stat			jsr PFT.CheckPathSTK
				>PULLW K.MLI.PARAMS+1
				>PULLW ZPPtr2
				>MLICALL MLIGETFILEINFO
				bcs .9
				jsr FILE.MLI2STAT
				clc
.9				rts
*--------------------------------------
FILE.SetIOBUF	>PUSHWI 1024			get a ProDOS IOBUF
				>PUSHBI S.MEM.F.ALIGN+S.MEM.F.NOMOVE
				jsr K.GetMem
				bcs .9
				
				>STYA K.MLI.PARAMS+3	Save Ptr to IOBUF for MLIOPEN call
				txa
				ldy #S.NODE.REG.IOBUF
				sta (ZPPtr1),y
.9				rts
*--------------------------------------
FILE.SetupPrt1A	jsr K.GetMemPtrA
				>STYA ZPPtr1				
				ldy #S.NODE.REG.REF
				lda (ZPPtr1),y
				sta K.MLI.PARAMS+1
				rts
*--------------------------------------
FILE.MLI2STAT	lda K.MLI.PARAMS+S.FILEINFO.ACCESS
				cmp #S.FILEINFO.ACCESS.FULL
				bne .1
				
				lda #S.STAT.MODE.XO+S.STAT.MODE.WO+S.STAT.MODE.RO
				bra .2
				
.1				and #S.FILEINFO.ACCESS.R
				beq .2
				lda #S.STAT.MODE.XO+S.STAT.MODE.RO	
				
.2				ldy #S.STAT.MODE				
				sta (ZPPtr2),y

				ldx #2
				ldy #S.STAT.P.TYPE+2
				
.3				lda K.MLI.PARAMS+S.FILEINFO.TYPE,x
				sta (ZPPtr2),y
				dey
				dex
				bpl .3
				rts
*--------------------------------------
MAN
SAVE /A2OSX.SRC/SYS/KERNEL.S.FILE
LOAD /A2OSX.SRC/SYS/KERNEL.S
ASM