A2osX/DRV/SSC.DRV.S.txt

PR#3
PREFIX /A2OSX.SRC
NEW
INC 1
AUTO 6
				.LIST OFF	
				.OP	65C02
				.OR $2000
				.TF /A2OSX.BOOT/DRV/SSC.DRV
*--------------------------------------
				.INB /A2OSX.DEV/INC/MACROS.I
				.INB /A2OSX.DEV/INC/A2OSX.I
*--------------------------------------
ZPTmpPtr1		.EQ ZPDRV
*--------------------------------------
				.INB DRV/X.SER.6551.S
*--------------------------------------
*			File Header (16 Bytes)
*--------------------------------------
CS.START		cld
				jmp Dev.Detect			cld,jmp abs=DRV
				.DA #$61				6502,Level 1 (65c02)
				.DA #1					DRV Layout Version 1
				.DA 0
				.DA CS.END-CS.START			Code Length
				.DA DEV.HEADER-CS.START		Device Header Offset
				.DA DRV.CS.START-CS.START	Driver Code Offset
				.DA DRV.CS.END-DRV.CS.START	Drv Code Length
*--------------------------------------
* Relocation Table
*--------------------------------------
L.MSG.DETECT	.DA MSG.DETECT
L.MSG.DETECT.OK	.DA MSG.DETECT.OK
L.MSG.DETECT.KO	.DA MSG.DETECT.KO
L.DEV.HEADER.NAME	.DA DEV.HEADER.NAME
				.DA 0					End Of Reloc Table
*--------------------------------------
Dev.Detect		sta hArgs
				>LDYA L.MSG.DETECT
				>SYSCALL CPrintFYA
				
				stz ZPTmpPtr1
				lda #$C1
				sta ZPTmpPtr1+1
				
.1				ldx #DEVSIG.Length-1

.2				ldy DEVSIG.Offset,x
				lda (ZPTmpPtr1),y
				cmp DEVSIG.Value,x
				bne .3
				dex
				bpl .2
				bra .4
				
.3				inc ZPTmpPtr1+1			no match, try next slot....
				lda ZPTmpPtr1+1
				cmp #$C8
				bne .1	
				
				>LDYA L.MSG.DETECT.KO
				>SYSCALL CPrintFYA

				lda #DEVMGR.ERRNOHW		Not Found in any slot, exiting
				sec
				rts	

.4				lda ZPTmpPtr1+1
				sta DEVSLOTCn
				and #$0F
				sta DEVSLOT0n
				ora #$30
				sta DEV.HEADER.NAME+4
				asl
				asl
				asl
				asl
				sta DEVSLOTn0

				>PUSHW L.DEV.HEADER.NAME
				>LDYA L.MSG.DETECT.OK
				>SYSCALL CPrintFYA
				clc
				rts
*--------------------------------------
CS.END
DEVSIG.Offset	.HS 05070B0C
DEVSIG.Value	.HS 38180131
DEVSIG.Length	.EQ DEVSIG.Value-DEVSIG.Offset
MSG.DETECT		>CSTR "Apple SSC (Super Serial Card,//c Serial Port) Driver.\n"
MSG.DETECT.OK	>CSTR "SSC Installed As Device : %S\n"
MSG.DETECT.KO	>CSTR "No SSC Found.\n"
hArgs			.BS 1
*--------------------------------------
*			Device Header (16 Bytes)
*--------------------------------------
DEV.HEADER		cld
				jmp (DRV.CS.START,x)
				.HS 00					DevID
				.DA #S.DEV.F.EVENT+S.DEV.F.COUT+S.DEV.F.CHAR
DEV.HEADER.NAME	>PSTR "COM1"			NAME
				.HS 00
				.HS 00.00.00.00
*--------------------------------------
*			Driver Code
*--------------------------------------
DRV.CS.START	.DA OPEN
				.DA GETEVENT
				.DA COUT
				.DA CLOSE
				.DA GETINFO
				.DA IRQ
L.DEVINFO		.DA DEVINFO
				.DA 0					end or relocation
*--------------------------------------
OPEN			ldx DEVSLOTn0
				
				php
				sei
				stz SSC.RESET,x 
				
				lda #$1E
				sta SSC.CTL,x
				
				ldx DEVSLOTn0
				lda #SSC.CMD.RIRQDIS
				sta SSC.CMD,x
				
				lda SSC.STATUS,x		clear any IRQ pending
				bmi *
				plp
				clc
				rts
*--------------------------------------
GETEVENT		ldx DEVSLOTn0
				lda SSC.STATUS,x
				bmi *

				and #SSC.STATUS.RDRF	incoming char?
				beq	.9
				
				lda SSC.DATA,x
				ldy #S.EVT.DATA
				sta (pEvent),y

				iny
				lda #0
				sta (pEvent),y
				
				lda #S.EVT.F.KEY
				sta (pEvent)
				
				clc
				rts
				
.9				lda #0
				sec
				rts
*--------------------------------------
COUT			pha
				
				ldx DEVSLOTn0
.1				lda SSC.STATUS,x
				bmi *
				and #SSC.STATUS.DCD+SSC.STATUS.DSR
				beq .9
								
				and #SSC.STATUS.TDRE	Outgoing char?
				bne .1
				
				pla
				sta SSC.DATA,x
				
				clc
				rts
				
.9				pla
				sec
				rts
*--------------------------------------
CLOSE			php
				sei
				ldx DEVSLOTn0
				stz SSC.RESET,x 
				plp
				clc
				rts
*--------------------------------------
GETINFO			>LDYA L.DEVINFO
IRQ				clc
				rts
*--------------------------------------
DRV.CS.END
DEVSLOT0n		.BS 1
DEVSLOTCn		.BS 1
DEVSLOTn0		.BS 1
DEVINFO			.DA #S.DEVINFO.TYPE.CHAR
				.DA #0
*--------------------------------------
MAN
SAVE DRV/SSC.DRV.S
ASM