A2osX/ProDOS.FX/ProDOS.S.XDOS.E.txt

NEW
  AUTO 3,1
*--------------------------------------
XDOS.Close		ldy #$01				close all ?
				lda (ZP.A3L),y
				bne XDOS.CloseOne	  	no, just one of them.

				sta cferr			 	clear global close error.
*				lda #$00				start at the beginning.

.1  			sta XDOS.FCBPtr			save current low byte of pointer.
				tax		 				get the level at which the file
				lda XDOS.FCBs+FCB.FLEVEL,x	was opened.
				cmp GP.FLEVEL		 	if file's level is < global level
				bcc .2				 	then don't close.

				lda XDOS.FCBs+FCB.ID,x	is this reference file open ?
				beq .2				  	no, try next.

				jsr flush2				clean it out...
				bcs L46B6			  	return flush errors.

				jsr close2				update fcb & vcb

				ldy #$01
				lda (ZP.A3L),y
				beq .2				  	no error if close all.

				bcs L46B6			  	close error.

.2  			lda XDOS.FCBPtr			inc pointer to next fcb
				clc
				adc #FCB
				bcc .1				  	branch if within same page.

				lda cferr			  	on final close report logged errors.
				beq L46B4			  	branch if errors.

				rts		 				(carry already set).
*--------------------------------------
XDOS.CloseOne	jsr XDOS.FlushOne		flush file 1st (including updating bitmap)
*				bcs L46B6			  	branch if errors.

				bcc close2

				php
				pha
				jsr close2
				pla
				plp
				rts

close2			ldx XDOS.FCBPtr
				lda XDOS.FCBs+FCB.BUFID,x	release file buffer
				jsr relbuffr
				bcs L46B6

				jsr XDOS.FCBDevIDSelect

				stz XDOS.FCBs,x			free fcb too

				jsr XDOS.FindVCBForDevNum	get vcb pointer.

				dec XDOS.VCBs+VCB.OFCNT,x	indicate one less file open.

L46B4			clc
				rts

L46B6  			bcs L46E6			  	don't report close all error now.
*--------------------------------------
XDOS.Flush		ldy #$01				flush all ?
				lda (ZP.A3L),y
				bne XDOS.FlushOne		no, just one of them.

				sta cferr			  	clear global flush error.
*				lda #$00				start at the beginning.

L46C3  			sta XDOS.FCBPtr			save current low byte of pointer.
				tax		 				index to ref #.
				lda XDOS.FCBs,x			is this reference file open ?
				beq L46D1			  	no, try next.

				jsr flush2			 	clean it out...
				bcs L46E6			  	return anty errors.

L46D1  			lda XDOS.FCBPtr			inc pointer to next fcb.
				clc
				adc #FCB
				bcc L46C3			  	branch if within same page

L46D9  			clc
				lda cferr			  	on last flush,
				beq L46E0			  	branch if no logged errors.

				sec		 				report error now
L46E0  			rts
*--------------------------------------
flush2			jsr XDOS.GetFCBBufX		must set up vcb & buffer locations 1st.
				bcc L46F1			  	branch if no error.

L46E6  			jmp glberr				error so check for close or flush all.

XDOS.FlushOne	stz cferr				for normal refnum flush, clear global error.
				jsr XDOS.GetFCB			setup pointer to fcb user references.
				bcs L46E6			  	return any errors.

L46F1  			lda XDOS.FCBs+FCB.ACCESS,x	test to see if file is modified.
				and #$02			 	is it write enabled ?
				beq L46D9			  	branch if 'read only'

				lda XDOS.FCBs+FCB.DIRTY,x	has eof been modified ?
				bmi L4704			  	if yes.

				jsr XDOS.GetFCBStatus	has data been modified ?
				and #$70			 	(was written to while it's been open?)
				beq L46D9			  	if not.

L4704  			jsr XDOS.GetFCBStatus
				and #$40			 	does current data buffer need to be
				beq L4710			  	written ? branch if not.

				jsr XDOS.WriteDBLK		if so, go write it.
				bcs L46E6			  	if error.

L4710  			jsr XDOS.GetFCBStatus	check to see if the index block (tree
*				and #$80			 	files only) needs to be written.
*				beq L471C			  	branch if not.

				bpl L471C

				jsr XDOS.WriteIBLK
				bcs L46E6			  	return any errors.

L471C  			ldy #0

				jsr XDOS.FCBDevIDSelect	X = XDOS.FCBPtr

L4723  			lda XDOS.FCBs+FCB.DEVID,x	note: this code depends on the defined
				sta XDOS.DE.DevID,y		order of the file control block and the
				inx		 				temporary directory area in 'work space'
				iny
				cpy #6
				bne L4723

				lda XDOS.DE.DirHBlk		read the directory header for this file
				ldx XDOS.DE.DirHBlk+1
				.DO LOWERCASE=1
				jsr XDOS.ReadGBufAXDir
				.ELSE
				jsr XDOS.ReadGBufAX	  	read DIR into the general purpose buffer.
				.FIN
				bcs L46E6			  	if error.

				jsr XDOS.GetDH			move header info.
				lda XDOS.DE.DirEBlk		get address of directory block that
				ldx XDOS.DE.DirEBlk+1	contains the file entry.
				cmp XDOS.DE.DirHBlk		test to see if it's the same block the
				bne .1				  	header is in. branch if not.

				cpx XDOS.DE.DirHBlk+1
				beq L4755			  	branch if header block = entry block

.1  			.DO LOWERCASE=1
				jsr XDOS.ReadGBufAXDir
				.ELSE
				jsr XDOS.ReadGBufAX	 	read DIR block with file entry in general buffer.
				.FIN

L4755  			jsr XDOS.ZPT.SetEIB		set up pointer to entry.

				jsr XDOS.ZPT.GetDE		move entry to temp entry buffer in

				ldx XDOS.FCBPtr			'work space'. update 'blocks used' count
				lda XDOS.FCBs+FCB.UBLK,x
				sta XDOS.DE.BlkUsed
				lda XDOS.FCBs+FCB.UBLK+1,x
				sta XDOS.DE.BlkUsed+1

				ldy #0				 	and move in end of file mark whether

L476C  			lda XDOS.FCBs+FCB.EOF,x	needed or not.
				sta XDOS.DE.EOF,y
				iny
				cpy #$03			 	move all 3 bytes
				beq L4780

				lda XDOS.FCBs+FCB.1stBLK,x	also move in the address of the file's
				sta XDOS.DE.Type,y		first block since it might have changed
				inx		 				since the file first opened.
				bne L476C			  	branch always.

L4780  			ldx XDOS.FCBPtr
				lda XDOS.FCBs+FCB.STYPE,x	the last thing to update is storage
				asl			  			type (y=XDOS.FCBPtr+2). shift into high
				asl			  			nibble.
				asl
				asl
				sta scrtch
				lda XDOS.DE.Filename	get old type byte (might be the same).
				and #$0F			 	strip off old type,
				ora scrtch			 	add in the new type
				sta XDOS.DE.Filename	and put it away.
				jsr XDOS.DE.Update		go update directory.
				bcs glberr			  	error.

				ldx XDOS.FCBPtr			mark
				stz XDOS.FCBs+FCB.DIRTY,x	fcb/directory as undirty.

				lda XDOS.DE.DevID		see if bitmap should be written.
				cmp XDOS.BM.DevID		is it in same as current file ?
				bne L47B2			  	yes, put it on the disk if necessary.

				jsr XDOS.FlushBM	 	go put it away.
				bcs glberr			  	flush error

L47B2  			clc
				rts
*--------------------------------------
* report error only if not a close all or flush all
*--------------------------------------
glberr			ldy #$01
				pha
				lda (ZP.A3L),y
				bne L47C1				not an 'all' so report now

				clc
				pla
				sta cferr			  	save for later

				rts

L47C1  			pla
				rts
*--------------------------------------
XDOS.FCBDevIDSelect
				ldx XDOS.FCBPtr
				lda XDOS.FCBs+FCB.DEVID,x
				sta GP.DEVNUM
				rts
*--------------------------------------
XDOS.SetFCBSType
				lsr
				lsr
				lsr
				lsr
				ldy XDOS.FCBPtr			and save it in fcb.
				sta XDOS.FCBs+FCB.STYPE,y
				rts
*--------------------------------------
XDOS.ClrFCBStatus
				ldy XDOS.FCBPtr			clear allocation states for data block
				lda XDOS.FCBs+FCB.F,y	and both levels of indexes/
				and #$F8
				sta XDOS.FCBs+FCB.F,y	indicates that either they exist now
				rts						or unnecessary for current position.
*--------------------------------------
XDOS.GetFCBStatus
				ldx XDOS.FCBPtr			index to fcb.
				lda XDOS.FCBs+FCB.F,x	return status byte.
				rts
*--------------------------------------
XDOS.SetFCBStatus
				ldx XDOS.FCBPtr
				ora XDOS.FCBs+FCB.F,x
				sta XDOS.FCBs+FCB.F,x
				rts
*--------------------------------------
L47CA  			lda #MLI.E.LOCKED	 	access error
				sec
L47CD  			rts
*--------------------------------------
XDOS.SetEOF		jsr XDOS.GetFCB.ST		can only move end of tree, sapling or seed.
				cmp #$04			 	tree type ?
				bcs L47CA			  	if not then access error

				asl
				asl
				asl
				asl
				sta stortyp				may be used later.
				lda XDOS.FCBs+FCB.ACCESS,y
				and #$02			 	is write enabled to set new eof ?
				beq L47CA			  	no, access error.

				jsr XDOS.TestWP			hardware write protected ?
				bcs L47CA			  	yes, access error.

				ldy XDOS.FCBPtr			save old eof so it can be seen
				iny		 				whether blocks need to be released
				iny		 				upon contraction.
				ldx #$02			 	all 3 bytes of the eof

L47EF  			lda XDOS.FCBs+FCB.EOF,y
				sta oldeof,x
				dey
				dex
				bpl L47EF

				ldy #$04
				ldx #$02

L47FD  			lda (ZP.A3L),y			position mark to new eof
				sta XDOS.TmpPos,x
				dey
				dex
				bpl L47FD

				ldx #$02			 	point to 3rd byte.

L4808  			lda oldeof,x			see if eof moved backwards so blocks
				cmp XDOS.TmpPos,x			can be released.
				bcc eofset				(branch if not)
				bne purge			  	branch if blocks to be released

				dex
				bpl L4808			  	all 3 bytes

eofset			ldy #$04
				ldx XDOS.FCBPtr			place new end of file into fcb
				inx
				inx

L481C  			lda (ZP.A3L),y
				sta XDOS.FCBs+FCB.EOF,x
				dex
				dey
				cpy #$02			 	all 3 bytes moved ?
				bcs L481C			  	no.

				jmp XDOS.SetFCB.DIRTY	mark fcb as dirty.

purge  			jsr XDOS.FlushOne	 	make sure file is current
				bcs L47CD

				ldx ZP.DataPtr+1		pointer to index block
				inx
				inx
				stx zpt+1			  	(zero page conflict with dir buf ptr)
				ldx ZP.DataPtr
				stx zpt
				ldy XDOS.FCBPtr			check if eof < mark
				iny
				iny
				ldx #$02

L4840  			lda XDOS.FCBs+FCB.MARK,y
				cmp XDOS.TmpPos,x			compare until not equal or carry clear.
				bcc L485F			  	branch if eof > mark.

				bne L484E			  	branch if eof < mark.

				dey
				dex
				bpl L4840			  	compare all 3 bytes

L484E  			ldy XDOS.FCBPtr
				ldx #$00

L4853  			lda XDOS.TmpPos,x			fake position, correct position will
				sta XDOS.FCBs+FCB.MARK,y	be made below...
				iny
				inx
				cpx #$03			 	move all 3 bytes
				bne L4853

L485F  			jsr XDOS.GetFreeCntVCBX	force free block count before releasing
				lda XDOS.TmpPos			 	blocks. prepare for purge of excess...
				sta dseed			  	all blocks and bytes beyond new eof
				lda XDOS.TmpPos+1				must be zero'd
				sta dsap
				and #$01
				sta dseed+1
				lda XDOS.TmpPos+2
				lsr
				sta dtree
				ror dsap			 	pass position in terms of block & bytes.
				lda dseed				now adjust for boundaries of $200
				ora dseed+1
				bne L48A2			  	branch if no adjustment necessary.

				lda dsap			 	get correct block positions for sap
				sec		 				and tree levels.
				sbc #$01
				sta dsap			 	deallocate for last (phantom) block

				lda #$02			 	and don't modify last data block.
				bcs L489F			  	branch if tree level unaffected.

				dec dtree
				bpl L489F			  	branch if new eof not zero

				lda #$00
				sta dtree			 	otherwise, make a null seed out of it.
				sta dsap

L489F  			sta dseed+1
L48A2  			ldy XDOS.FCBPtr			also must pass file's 1st block address.
				lda XDOS.FCBs+FCB.1stBLK,y
				sta XDOS.1stBLK
				lda XDOS.FCBs+FCB.1stBLK+1,y
				sta XDOS.1stBLK+1
				stz deblock				lastly, initialize # of blocks to
				stz deblock+1			be free'd.
				jsr detree				deallocate blocks from tree.
				php		 				save any error status until fcb
				pha		 				is cleaned up.

				sec
				ldy XDOS.FCBPtr
				ldx #$ff

L48C2  			inx
				lda XDOS.1stBLK,x
				sta XDOS.FCBs+FCB.1stBLK,y	move in possible new first file block
				lda XDOS.FCBs+FCB.UBLK,y	address. adjust usage count also
				sbc deblock,x
				sta XDOS.FCBs+FCB.UBLK,y
				iny
				txa
				beq L48C2			  	without disturbing carry.

				lda stortyp				get possibly modified storage type
				jsr XDOS.SetFCBSType

				jsr XDOS.ClrFCBStatus	make it look as though position has
				jsr XDOS.SetVCB.FBLK	nothing allocated, update total blocks
				ldy XDOS.FCBPtr			in fcb and correct position.
				iny
				iny

				ldx #2

L48F2  			lda XDOS.FCBs+FCB.MARK,y	tell 'rdposn' to go to correct
				sta XDOS.TmpPos,x
				eor #$80			 	position from incorrect place.
				sta XDOS.FCBs+FCB.MARK,y
				dey
				dex
				bpl L48F2

				jsr rdposn			 	go to correct position.

				bcc L490D			  	if no error.

				plx		 				discard latest error code to stack

				plp
				sec
				php

				pha		 				save new error.

* mark file as in need of a flush and update fcb with new end of file,
* then flush it.

L490D  			jsr eofset				go mark and update
				jsr XDOS.FlushOne		then go do the flush.
				bcc L491C			  	branch if no error.

				plx		 				clean previous error off stack
				plx						and previous P
				rts

L491C  			pla		 				report any errors that may have
				plp		 				appeared.
				rts
*--------------------------------------
XDOS.GetEOF		ldx XDOS.FCBPtr			index to end of file mark

				ldy #$02			 	and index to user's call parameters

L4924  			lda XDOS.FCBs+FCB.EOF,x
				sta (ZP.A3L),y
				inx
				iny
				cpy #$05
				bne L4924			  	loop until all 3 bytes moved

				clc		 				no errors
				rts
*--------------------------------------
XDOS.NewLine	ldy #$02				adjust newline status for open file.

				lda (ZP.A3L),y			on or off ?
				ldx XDOS.FCBPtr			it will be 0 if off.
				sta XDOS.FCBs+FCB.NLMASK,x	set new line mask

				iny
				lda (ZP.A3L),y			and move in 'new-line' byte
				sta XDOS.FCBs+FCB.NLBYTE,x

				clc		 				no error possible
				rts
*--------------------------------------
XDOS.GetFileInfo
				jsr XDOS.FindFile		look for file.
				bcc .1				  	no error.

				jsr XDOS.GetFileInfoVol
				bcs .9

.1	  			lda XDOS.DE.Filename	transfer bytes from internal order to
				lsr			  			call spec via XDOS.DE2FINFO translation
				lsr			  			table but first change storage type to
				lsr			  			external (low nibble) format.
				lsr
				sta XDOS.DE.Filename

				ldy #$11			 	index to last of user's spec table.

.2  			lda XDOS.DE2FINFO-3,y
				and #$7F			 	strip bit used by setinfo
				tax
				lda XDOS.DE.Filename,x	move directory info to call spec. table
				sta (ZP.A3L),y
				dey
				cpy #$03
				bcs .2			  		if all info bytes moved, retn carry clr

*				clc

.9  			rts
*--------------------------------------
XDOS.SetFileInfo
				jsr XDOS.FindFile		get the file to work on.
				bcs .3				  	if error.

				lda GP.BUBIT		  	see if backup bit can be cleared
				eor #$20
				and XDOS.DE.Access
				and #$20
				sta bkbitflg			or preserve current...

				ldy #$0D			 	init pointer to user supplied list.

.1  			ldx XDOS.DE2FINFO-3,y	get index to corresponding 'd.' table.
				bmi .2			  		branch if parameter can't be set.

				lda (ZP.A3L),y
				sta XDOS.DE.Filename,x

.2  			dey		 				has user's request been satisfied ?
				cpy #$03
				bcs .1				  	no, move next byte.

				and #$18				make sure no illegal access bits were
				beq .4				  	set !! branch if legal access.

				lda #MLI.E.LOCKED	 	otherwise, access error.
				sec
.3  			rts

.4  			ldy #$0B
				lda (ZP.A3L),y			was clock null input ?
				bne XDOS.SetFileInfoEx.8

				jmp XDOS.DE.Update		update with clock also...
*--------------------------------------
XDOS.SetFileInfoEx
				jsr XDOS.FindFile
				bcs XDOS.GetFileInfoEx.RTS

				ldx #S.FIEX.BLKPTR+2-1
				ldy #S.FIEX.BLKPTR+2-1+3

.2				lda (ZP.A3L),y
				sta XDOS.DE.Filename,x
				dey
				dex
				bpl .2
XDOS.SetFileInfoEx.8
				jmp XDOS.DE.UpdateNoMTime
*--------------------------------------
XDOS.GetFileInfoEx
				jsr XDOS.FindFile
				bcc .1

				jsr XDOS.GetFileInfoVol
				bcs .9

.1				ldx #S.FIEX.BLKPTR+2-1
				ldy #S.FIEX.BLKPTR+2-1+3

.2				lda XDOS.DE.Filename,x
				sta (ZP.A3L),y
				dey
				dex
				bpl .2

				ldx #7
				ldy #S.FIEX.ACL+7+3

				.DO ACL=1

.3				lda XDOS.DH.ACL,x
				sta (ZP.A3L),y
				dey
				dex
				bpl .3

				.ELSE

				lda #0
.3				sta (ZP.A3L),y
				dey
				dex
				bpl .3

				.FIN

*				clc
.9
XDOS.GetFileInfoEx.RTS
				rts
*--------------------------------------
XDOS.GetFileInfoVol
				cmp #MLI.E.INVPATH	 	was it a root directory file ?
				sec		 				(in case of no match)
				bne .9				  	if not, then error.

				lda #$F0
				sta XDOS.DE.Filename	for get info, report proper storage type

				stz reql			 	force a count of free blocks.
				stz reqh

				ldx XDOS.VCBPtr
				jsr XDOS.GetFreeCntVCBX	get a fresh count of free blocks on

				ldx XDOS.VCBPtr			this volume.
				lda XDOS.VCBs+VCB.FBLK+1,x	return total blocks and total in use.
				sta reqh			 	1st transfer 'free' blocks to zpage
				lda XDOS.VCBs+VCB.FBLK,x		for later subtraction to determine
				sta reql			 	the 'used' count.

				lda XDOS.VCBs+VCB.TBLK+1,x	transfer to 'd.' table as aux id
				sta XDOS.DE.AuxType+1	(total block count is considered aux id
				pha		  				for the volume)
				lda XDOS.VCBs+VCB.TBLK,x
				sta XDOS.DE.AuxType
				sec		 				subtract and report the number of
				sbc reql			 	blocks 'in use'
				sta XDOS.DE.BlkUsed
				pla
				sbc reqh
				sta XDOS.DE.BlkUsed+1

				clc

.9				rts
*--------------------------------------
XDOS.ACL		jsr XDOS.FindDirOrVol
				bcs .9

				jsr XDOS.ReadGBufDEKeyPtr
				bcs .9

				ldx #7

				ldy #S.FIEX.ACL+3
				lda (ZP.A3L),y
				beq .2

				ldy #S.FIEX.ACL+7+3

.1				lda (ZP.A3L),y
				sta XDOS.GBuf+20,x
				dey
				dex
				bpl .1

				.DO LOWERCASE=1
				jmp XDOS.WriteGBufDir
				.ELSE
				jmp XDOS.WriteGBuf
				.FIN

.2				ldy #S.FIEX.ACL+7+3

.3				lda XDOS.GBuf+20,x
				sta (ZP.A3L),y
				dey
				dex
				bpl .3

*				clc
.9				rts
*--------------------------------------
XDOS.Rename		jsr XDOS.CheckPath		look for source (original) file.
				bcc XDOS.RenameFileDir 	if found.

				cmp #$40			 	trying to rename a volume ?
				bne L49FD			  	no, return error.

XDOS.RenameVol	jsr XDOS.GetRenPath		syntax new name.
				bcs L49FD			  	rename error.

				ldy XDOS.PathBuf		find out if only rootname for new name
				iny
				lda XDOS.PathBuf,y		must be $FF if volume name only.
				bne L4A72			  	if not single name

				ldx XDOS.VCBPtr			check for open files before changing.
				lda XDOS.VCBs+VCB.OFCNT,x
				beq L49FF			  	if volume not busy.

				lda #MLI.E.OPEN		 	file busy error.
L49FD  			sec
				rts

L49FF  			ldy #0				 	get newname's length
				lda XDOS.PathBuf,y
				ora #$F0			 	(root file storage type)
				jsr XDOS.UpdateHdr		update root directory.
				bcs .9			  		rename error.

				ldy #$00
				ldx XDOS.VCBPtr			update vcb also.

.3  			lda XDOS.PathBuf,y		move new name to vcb.
				beq .8

				sta XDOS.VCBs,x
				iny		 				next character
				inx
				bra .3
.8
*	  			clc		 				no errors
.9				rts
*--------------------------------------
XDOS.RenameFileDir
				jsr XDOS.GetNamPtr		set y = 1st char of path, x = 0.

L4A21  			lda XDOS.PathBuf,y		move original name to XDOS.GBuf
				sta XDOS.GBuf,x			for later comparison to new name.
				bmi L4A2D			  	if last character has been moved

				iny		 				otherwise, get the next one.
				inx
				bra L4A21

L4A2D  			jsr XDOS.GetRenPath		get new name syntaxed.
				bcs L4A74			  	rename error.

				jsr XDOS.GetNamPtr	   	set y = path, x = 0.

				lda XDOS.PathBuf,y		now compare new name with old name

L4A38  			cmp XDOS.GBuf,x			to make sure they are in the same dir.
				php		 				save result of comparison.
				and #$F0			 	was last char really a count ?
				bne L4A46			  	if not.

				sty rnptr			  	save pointer to next name, it might
				stx namptr				be the last.

L4A46  			plp		 				result of last comparison ?
				bne L4A52			  	branch if different character or count.

				inx		 				bump pointers.
				iny
				lda XDOS.PathBuf,y		was it the last character ?
				bne L4A38			  	if not.

				clc		 				no operation, names were the same.
				rts

L4A52  			ldy rnptr			  	index to last name in the chain.
				lda XDOS.PathBuf,y		get last name length.
				sec
				adc rnptr
				tay
				lda XDOS.PathBuf,y		this byte should be $00 !
				bne L4A72			  	if not, bad path error.

				ldx namptr			 	index to last of original name
				lda XDOS.GBuf,x
				sec
				adc namptr
				tax
				lda XDOS.GBuf,x			this byte should also be $00.
				beq L4A76			  	if so, continue processing.

L4A72  			lda #MLI.E.INVPATH	 	bad pathname error.
				.HS 2C					BIT ABS
L4A7F			lda #MLI.E.DUPFILE
L4A74  			sec
				rts

L4A76  			jsr XDOS.CheckPath		test for duplicate file name.
				bcc L4A7F			  	duplicate name error.

				cmp #MLI.E.FNOTFND	 	was it a valid file not found ?
				bne L4A74			  	no, rename error.

				jsr XDOS.GetPath		syntax pathname of file to be changed.
				jsr XDOS.FindFile		get all the info on this file.
				bcs L4A74			  	rename error.

				jsr XDOS.IsOpened		is file in use ?
				lda #MLI.E.OPEN		 	anticipate file busy error.
				bcs L4A74			  	error if in use.

				lda XDOS.DE.Access		test bit which allows rename.
				and #$40
				bne L4A9D			  	branch if ok to rename

				lda #MLI.E.LOCKED	 	otherwise, illegal access.
				.HS 2C					BIT ABS
L4A98			lda #MLI.E.INCFF
				sec
				rts

L4A9D  			lda XDOS.DE.Filename	find out which storage type.
				and #$F0			 	strip off name length.
				cmp #$D0			 	is it a directory ?
				beq L4AAE			  	then ok.

				cmp #$40			 	is it a seed, sapling or tree ?
				bcs	L4A98			 	file incompatible error.

L4AAE  			jsr XDOS.GetRenPath		since both names go into the directory,
				bcs L4A74			  	syntax the new name to get the local

				ldy rnptr			  	name address. y = index to local name
				ldx XDOS.PathBuf,y		length. adj y to last char of new name.
				tya
				adc XDOS.PathBuf,y
				tay

L4ABE  			lda XDOS.PathBuf,y		move local name to dir entry workspace.
				sta XDOS.DE.Filename,x
				dey
				dex
				bne L4ABE

				lda XDOS.DE.Filename	preserve file storage type.
				and #$F0			 	strip off old name length.
				tax
				ora XDOS.PathBuf,y		add in new name's length.
				sta XDOS.DE.Filename
				cpx #$D0			 	that file must be changed also.
				bne L4AF0			  	branch if not directory type.

				jsr XDOS.ReadGBufDEKeyPtr
				bcs L4A74			  	errors.

				ldy rnptr			  	change the header's name to match the
				lda XDOS.PathBuf,y		owner's new name. get local name length.
				ora #$E0				assume it's a header.
				jsr XDOS.UpdateHdr
				bcs L4A74

L4AF0  			jmp XDOS.DE.UpdateNoMTime	end by updating all path directories.
*--------------------------------------
XDOS.GetNamPtr	ldy #$00				return pointer to 1st name of path.
				bit prfxflg				is this a prefixed name ?
				bmi .1				  	branch if not.

				ldy GP.NEWPFXPTR

.1  			ldx #$00

				rts
*--------------------------------------
XDOS.UpdateHdr	ldx #$00

.1  			sta XDOS.GBuf+4,x
				inx
				iny
				lda XDOS.PathBuf,y
				bne .1

				.DO LOWERCASE=1
				jmp XDOS.WriteGBufDir
				.ELSE
				jmp XDOS.WriteGBuf		write changed header block.
				.FIN
*--------------------------------------
XDOS.Destroy	jsr XDOS.FindFile		look for file to be destroyed.
				bcs L4B67			  	if error.

				jsr XDOS.IsOpened		is it open ?
				lda totent
				bne L4B64			  	error if open.

				stz reql			 	force proper free count in volume.
				stz reqh			 	(no disk access occurs if already proper)
				jsr XDOS.CheckFree
				bcc L4B39				no errors.

				cmp #MLI.E.VOLFULL	 	was error a full disk ?
				bne L4B66			  	no, report error.

L4B39  			lda XDOS.DE.Access		make sure ok to destroy file.
*				and #$80
*				bne L4B45
				bmi L4B45

				lda #MLI.E.LOCKED	 	access error
				jsr GP.SYSERR

L4B45  			lda GP.DEVNUM		 	last device used.
				jsr XDOS.TestWPA		test for write protected hardware
				bcs L4B67			  	before going thru deallocation.

				lda XDOS.DE.KeyPtr		'detree' needs first block address
				sta XDOS.1stBLK
				lda XDOS.DE.KeyPtr+1
				sta XDOS.1stBLK+1
				lda XDOS.DE.Filename	find out which storage type.
				and #$F0			 	strip off name length.
				cmp #$40			 	is it a seed, sapling or tree ?
				bcc XDOS.DestroyFile  	branch if it is.
				bra XDOS.DestroyDir	  	otherwise, test for directory destroy.

L4B64  			lda #MLI.E.OPEN			file busy error.

L4B66  			sec		 				can't be destroyed

L4B67			rts
*--------------------------------------
XDOS.DestroyFile
				sta stortyp				destroy a tree file. save storage type.

				ldx #$05

*				lda #$00			 	set 'detree' input variables, must be

.1  			stz stortyp,x		   	in order: deblock, dtree, dsap, dseed.
				dex
				bne .1				  	loop until all zero'd.

				lda #$02			 	this avoids an extra file i/o and pre-
				sta dseed+1				vents destruction of any deleted data.
				inc delflag				don't allow detree to zero index blocks.
				jsr detree				make trees and saplings into seeds.
				dec delflag				reset flag.
				bcs L4B93			  	(de-evolution)

L4B85  			lda XDOS.1stBLK			now deallocate seed.
				ldx XDOS.1stBLK+1
				jsr XDOS.DeallocAX
				bcs L4B93

				jsr XDOS.FlushBM

L4B93  			pha		 				save possible error code.
				stz XDOS.DE.Filename 	update directory to free entry space.

				jsr XDOS.DH.DecFileCnt	mark header with one less file.

				jsr XDOS.SetVCB.FBLK	go update block count in vcb (ignore
				jsr XDOS.DE.Update		error, if any) and update dir last.
				tax		 				save possible new error code,
				pla		 				restore possible old error code.
				bcc L4BAF			  	branch if last call succeeded.
				txa		 				last call failed, use it's error code.

L4BAF  			cmp #$01			 	adjust carry accordingly
				rts
*--------------------------------------
L4BCD  			bcc L4B85			  	branch widened (always taken)
*--------------------------------------
XDOS.DestroyDir	cmp #$D0			 	is this a directory file ?
				bne L4C1B			  	no, file incompatible.

				jsr XDOS.GetBM			make sure a buffer available for bitmap
				bcs L4C1A			  	if error.

				jsr XDOS.ReadGBufDEKeyPtr	read 1st block of directory into XDOS.GBuf
				bcs L4C1A

				lda XDOS.GBuf+37		do any files exist in this directory ?
				ora XDOS.GBuf+38
				bne L4C1Abis			if so, access error.

L4BF6  			sta XDOS.GBuf+4			make it an invalid subdirectory
				.DO LOWERCASE=1
				jsr XDOS.WriteGBufDir
				.ELSE
				jsr XDOS.WriteGBuf
				.FIN
				bcs L4C1A

L4BFE  			lda XDOS.GBuf+2			get forward link.
				cmp #$01			 	test for null block into carry.
				ldx XDOS.GBuf+3			get the rest of the block address.
				bne L4C0A			  	branch if not null.
				bcc L4BCD			  	was the low part null as well ?

L4C0A  			jsr XDOS.DeallocAX		free this block.
				bcs L4C1A

				lda XDOS.GBuf+2
				ldx XDOS.GBuf+3
				jsr XDOS.ReadGBufAX		read next DIR block (no need to unpack)
				bcc L4BFE			  	loop until all freed

L4C1A  			rts

L4C1Abis		lda #MLI.E.LOCKED	 	access error.
				.HS 2C					BIT ABS
L4C1B  			lda #MLI.E.INCFF	 	file incompatible
				jsr GP.SYSERR
*--------------------------------------
XDOS.SetFCB.DIRTY
				pha		 				mark fcb as dirty so the directory will be flushed on 'flush'.
				phy		 				save regs.

				ldy XDOS.FCBPtr

				lda #$80			 	mark fcb as dirty.
				sta XDOS.FCBs+FCB.DIRTY,y	save it back

				ply		 				and restore regs.
				pla
				rts
*--------------------------------------
XDOS.SetVCB.FBLK
				ldx XDOS.VCBPtr			update block free count in vcb. point to vcb of correct device.
				lda deblock				get # of blocks recently freed.
				adc XDOS.VCBs+VCB.FBLK,x
				sta XDOS.VCBs+VCB.FBLK,x	update current free block count.
				lda deblock+1
				adc XDOS.VCBs+VCB.FBLK+1,x
				sta XDOS.VCBs+VCB.FBLK+1,x

				stz XDOS.VCBs+VCB.BMAPIDX,x	force re-scan from 1st bitmap

*			lda #0						?????

				rts
*--------------------------------------
MAN
SAVE usr/src/prodos.fx/prodos.s.xdos.e
LOAD usr/src/prodos.fx/prodos.s
ASM