A2osX/BIN/EDIT.S.txt

PR#3
PREFIX /A2OSX.SRC
NEW
INC 1
AUTO 6
				.LIST OFF
				.OP	65C02
				.OR	$2000
				.TF /A2OSX.BOOT/BIN/EDIT
*--------------------------------------
				.INB /A2OSX.DEV/INC/MACROS.I
				.INB /A2OSX.DEV/INC/A2OSX.I
*--------------------------------------
ZPPTR1			.EQ ZPBIN
ZPPTR2			.EQ ZPBIN+2
BufPtr			.EQ ZPBIN+4
BufPtrBackup	.EQ ZPBIN+6
ClipboardPtr	.EQ ZPBIN+8
*--------------------------------------
PromptBufferMax	.EQ 64
PromptModeHelp	.EQ 2
PromptModeFind	.EQ 4
PromptModeReplace	.EQ 6
PromptModeSave	.EQ 8
*--------------------------------------
*			File Header (16 Bytes)
*--------------------------------------
CS.START		cld
				jmp (.1,x)
				.DA #$61				6502,Level 1 (65c02)
				.DA #1					BIN Layout Version 1
				.DA 0
				.DA CS.END-CS.START		Code Length To Relocate
				.DA DS.END-DS.START		Data Segment to Allocate
				.DA 0
				.DA 0
*--------------------------------------
* Relocation Table
*--------------------------------------				
.1				.DA CS.INIT
				.DA CS.RUN
				.DA CS.DOEVENT		
				.DA	CS.QUIT
L.SEQ.DETECT	.DA SEQ.DETECT
L.SEQ.INIT		.DA SEQ.INIT
L.SEQ.RESET		.DA SEQ.RESET
L.SEQ.INV		.DA SEQ.INV
L.SEQ.NORM		.DA SEQ.NORM
L.SEQ.CEOL		.DA SEQ.CEOL
L.MSG.TOPBAR	.DA MSG.TOPBAR
L.MSG.STATUSBAR	.DA MSG.STATUSBAR
L.MSG.STATUSBAR.H	.DA MSG.STATUSBAR.H
L.MSG.STATUSBAR.F	.DA MSG.STATUSBAR.F
L.MSG.STATUSBAR.R	.DA MSG.STATUSBAR.R
L.MSG.STATUSBAR.S	.DA MSG.STATUSBAR.S
L.MSG.STATUSBAR.E	.DA MSG.STATUSBAR.E
L.MSG.NEWFILE	.DA MSG.NEWFILE
L.MSG.GOTOXY	.DA MSG.GOTOXY
L.MSG.HELP		.DA MSG.HELP
J.PROMPT		.DA Prompt.Editor
				.DA Prompt.Help
				.DA Prompt.Find
				.DA Prompt.Replace
				.DA Prompt.Save
J.CTRL			.DA Ctrl.Invalid
				.DA Ctrl.A
				.DA Ctrl.B
				.DA Ctrl.C
				.DA Ctrl.D
				.DA Ctrl.E
				.DA Ctrl.F
				.DA Ctrl.G
				.DA Ctrl.BS
				.DA Ctrl.TAB
				.DA Ctrl.LF
				.DA Ctrl.VT
				.DA Ctrl.L
				.DA Ctrl.CR
				.DA Ctrl.N
				.DA Ctrl.O
				.DA Ctrl.P
				.DA Ctrl.Q
				.DA Ctrl.R
				.DA Ctrl.S
				.DA Ctrl.T
				.DA Ctrl.FS
				.DA Ctrl.V
				.DA Ctrl.W
				.DA Ctrl.X
				.DA Ctrl.Y
				.DA Ctrl.Z
				.DA Ctrl.ESC
				.DA Ctrl.Invalid
				.DA Ctrl.Invalid
				.DA Ctrl.Invalid
				.DA Ctrl.Invalid
				.DA 0
*--------------------------------------
CS.INIT			lda #$ff
				ldy #bSaved
				sta (pData),y
								
				>SYSCALL GetArgC
				cmp #1
				beq .1					No arg, new file....
				
				lda #1
				>SYSCALL GetArgA
				
				>SYSCALL GetFullPathYA
				txa
				ldy #hFileName
				sta (pData),y
				
				jsr LoadFile
				bcc .8					if CS, Failed to load file, keep name, but new file....
				
.1				>PUSHWI 1				buffer size = 0 (+ 1 for ending 0)
				>PUSHBI S.MEM.F.INIT0
				>SYSCALL GetMem
				bcs .9
				
				txa
				ldy #hBuffer			FileLen already set to 0
				sta (pData),y
				
.8				lda (pPs)
				ora #S.PS.F.EVENT		Now accept events
				sta (pPs)
				clc
.9				rts
*--------------------------------------
CS.RUN			>LDYA L.SEQ.DETECT
				>SYSCALL CPrintFYA	Send Query for term W & H
				bcs .9
				
.1				>SYSCALL Sleep
				>SYSCALL GetC
				bcs .1
				
				jsr CharIn
				
				ldy #ScreenW			Wait for Response from terminal
				lda (pData),y			for W & H
				beq .1
	
				jsr SCRN.Init
				bcs .9
				
.2				ldy #bCancel
				lda (pData),y
				bne .99
	
				>SYSCALL Sleep
				>SYSCALL GetC
				
				bcs .2
				
				jsr CharIn
				bra .2
				
.99				lda #0
.9				sec				
				rts
*--------------------------------------
CS.DOEVENT		sec
				rts
*--------------------------------------
CS.QUIT			ldy #hBuffer
				lda (pData),y
				beq .1
				>SYSCALL FreeMemA
				
.1				ldy #hBufferBackup
				lda (pData),y
				beq .2
				>SYSCALL FreeMemA
				
.2				ldy #hClipBoard
				lda (pData),y
				beq .3
				>SYSCALL FreeMemA

.3				ldy #hFileName
				lda (pData),y
				beq .8
				>SYSCALL FreeMemA

.8				>LDYA L.SEQ.RESET
				>SYSCALL CPrintFYA
				bcs .9
				lda #12
				>SYSCALL PutCA
.9				rts
*--------------------------------------
CharIn			tax
				
				ldy #bEscMode
				lda (pData),y
				asl
				txa
				bcc .1
				
				cmp #'['
				beq .8

				ldy #EscBuffer
				lda (pData),y
				inc
				sta (pData),y
				
				clc
				adc #EscBuffer
				tay
				txa
				sta (pData),y
				
				cmp #64

				bcc .8
				jsr CharIn.Esc
				bcs .8					Not translated, exit
				
.1				pha
				ldy #PromptMode
				lda (pData),y
				tax
				pla
				jmp (J.PROMPT,x)

.8				clc
				rts
*--------------------------------------
CharIn.Esc		ldy #bEscMode
				lda #0
				sta (pData),y
				
				ldy #EscBuffer
				lda (pData),y
				clc
				adc #EscBuffer
				tay
				
				lda (pData),y
				
				ldx EscChars
				
.1				cmp EscChars,x
				beq .2
				dex
				bne .1
				cmp #'R'				Response to cursor position query?
				beq .3
				sec
				rts
				
.2				lda EscAscii,x
				clc
				rts
				
.3				stz TmpByte
				
				ldy #EscBuffer+1
				
.4				lda (pData),y
				cmp #';'
				beq .5
				
				and #$0f
				pha
				lda TmpByte
				asl
				asl
				clc
				adc TmpByte
				asl
				sta TmpByte
				pla
				clc
				adc TmpByte
				sta TmpByte
				iny
				bra .4
				
.5				phy

				lda TmpByte
				ldy #ScreenH
				sta (pData),y
				dec						Remove 2 (top & status bar) for viewportH
				dec
				ldy #ViewPortH
				sta (pData),y
				dec
				ldy #ViewPortHm1		Remove 1 more to store offsert to last line of viewport
				sta (pData),y
				
				ply
				
				stz TmpByte
				
				iny
				
.6				lda (pData),y
				cmp #'R'
				beq .7
				
				and #$0f
				pha
				lda TmpByte
				asl
				asl
				clc
				adc TmpByte
				asl
				sta TmpByte
				pla
				clc
				adc TmpByte
				sta TmpByte
				iny
				bra .6
				
.7				lda TmpByte
				ldy #ScreenW
				sta (pData),y
				
				clc
				rts
*--------------------------------------
LoadFile		>PUSHWI 0				Aux type
				>PUSHBI 4				S.FILEINFO.TYPE.TXT
				>PUSHBI	SYS.FOpen.R
				ldy #hFileName
				lda (pData),y
				
				>SYSCALL GetMemPtrA
				
				>PUSHYA
				>SYSCALL LoadFile
				bcs .9
				
				stx hMem
				>STYA TmpLen
				iny
				bne .2
				inc						+1 for ending zero
				
.2				>PUSHYA
				>PUSHBI S.MEM.F.INIT0
				>SYSCALL GetMem
				bcs .98
				
				>STYA ZPPTR2
				txa
				ldy #hBuffer
				sta (pData),y
				
				lda hMem
				
				>SYSCALL GetMemPtrA
				>STYA ZPPTR1
				
				>LDYA TmpLen
				>STYA TmpCount

				ldy #0
				
.5				jsr DecTmpCount
				beq .6
				lda (ZPPTR1),y
				sta (ZPPTR2),y
				iny
				bne .5
				inc ZPPTR1+1
				inc ZPPTR2+1
				bra .5
				
.6				ldy #FileLen
				lda TmpLen
				sta (pData),y
				iny
				lda TmpLen+1
				sta (pData),y
				
				jsr .98
				clc
				rts
				
.98				pha
				lda hMem
				>SYSCALL FreeMemA
				pla				
				sec
.9				rts				
*--------------------------------------
SaveFile		ldy #hBuffer
				lda (pData),y
				>SYSCALL GetMemPtrA
				>PUSHYA
				
				ldy #FileLen+1
				>PUSHB (pData),y
				dey
				>PUSHB (pData),y
				
				>PUSHWI 0				Aux type
				>PUSHBI 4				S.FILEINFO.TYPE.TXT
				>PUSHBI	SYS.FOpen.X+SYS.FOpen.W
				ldy #hFileName
				lda (pData),y
				
				>SYSCALL GetMemPtrA
				
				>PUSHYA
				
				>SYSCALL SaveFile
				rts
*--------------------------------------
DecTmpCount		lda TmpCount
				bne .1
				lda TmpCount+1
				beq .9
				dec TmpCount+1
.1				dec TmpCount
				ora #$ff				make sure NZ
.9				rts				
*--------------------------------------
				.INB BIN/EDIT.S.BUF
				.INB BIN/EDIT.S.CTRL
				.INB BIN/EDIT.S.SCRN
*--------------------------------------
CS.END
SEQ.DETECT		>CSTR "Querying terminal capabilities...\e[999;999H\e[6n"
SEQ.INIT		>CSTR "\ec\e[2;%dr"
SEQ.RESET		>CSTR "\ec"
SEQ.INV			>CSTR "\e[7m"
SEQ.NORM		>CSTR "\e[0m"
SEQ.CEOL		>CSTR "\e[K"
MSG.TOPBAR		>CSTR "\e[1;1H\e[7mA2osX Edit:%S\e[K\e[0m"
MSG.STATUSBAR	>CSTR "\e[%d;1H\e[7mPress Ctrl-A For Help                 Length:%D Col:%d Line:%D\e[K\e[0m"
MSG.STATUSBAR.H	>CSTR "\e[%d;1H\e[7mPress any key to exit this screen:\e[K\e[0m"
MSG.STATUSBAR.F	>CSTR "\e[%d;1H\e[7mFind:%S\e[K\e[0m"
MSG.STATUSBAR.R	>CSTR "\e[%d;1H\e[7mReplace:%S\e[K\e[0m"
MSG.STATUSBAR.S	>CSTR "\e[%d;1H\e[7mSave:%S\e[K\e[0m"
MSG.STATUSBAR.E	>CSTR "\e[%d;1H\e[7mError:%h\e[K\e[0m"
MSG.GOTOXY		>CSTR "\e[%d;%dH"
MSG.HELP		>PSTR "All commands: (* = Not yet implemented)"
				>PSTR "------------"
				>PSTR "  Ctrl-A : This help screen"
				>PSTR "  Ctrl-B : Mark beginning of selection"
				>PSTR "  Ctrl-C : Copy selection to clipboard"
				>PSTR "  Ctrl-D : Delete selection"
				>PSTR "  Ctrl-E : Mark end of selection"
				>PSTR "  Ctrl-F : * Find a string..."
				>PSTR "  Ctrl-G : Go to start of current line"
				>PSTR "  Ctrl-L : Go to end of current line"
				>PSTR "  Ctrl-N : * Find next"
				>PSTR "  Ctrl-O : Page up"
				>PSTR "  Ctrl-P : Page down"
				>PSTR "  Ctrl-Q : Quit"
				>PSTR "  Ctrl-R : * Replace found string with..."
				>PSTR "  Ctrl-S : Save file to disk..."
				>PSTR "  Ctrl-T : Go to top of file"
				>PSTR "  Ctrl-V : Past clipboard at cursor position"
				>PSTR "  Ctrl-W : Erase current line"
				>PSTR "  Ctrl-X : Cut block to clipboard"
				>PSTR "  Ctrl-Y : Go to end of file"
				>PSTR "  Ctrl-Z : * Undo previous change"
				.HS 00
*--------------------------------------
MSG.NEWFILE		>PSTR "(new file)"
EscChars		>PSTR "DBAC"
EscAscii		.HS 04080A0B15
hMem			.BS 1
TmpFilename		.BS 1
TmpByte			.BS 1
TmpLen			.BS 2
TmpCount		.BS 2
TmpIndex		.BS 2
SelLen			.BS 2
BUF.LOffset		.BS 2
BUF.COffset		.BS 2
BUF.TmpLine1	.BS 2
BUF.TmpLine2	.BS 2
bNotRepaint		.BS 1
bSelected		.BS	1
*--------------------------------------
				.DUMMY
				.OR 0
DS.START
PromptBuffer	.BS PromptBufferMax+1
PromptMode		.BS 1
bCancel			.BS 1
bSaved			.BS 1
bEscMode		.BS 1
EscBuffer		.BS 16
hFileName		.BS 1
hFind			.BS 1
hReplace		.BS 1
hBuffer			.BS 1
hBufferBackup	.BS 1
FileLen			.BS 2
hClipBoard		.BS 1
ClipBoardLen	.BS 2
ScreenW			.BS 1
ScreenH			.BS 1
ViewPortH		.BS 1
ViewPortHm1		.BS 1
ScreenX			.BS 1
ScreenY			.BS 2
CurX			.BS 1
CurY			.BS 1
FileX			.BS 1
FileY			.BS 2
SelStart		.BS 2
SelEnd			.BS 2
DS.END
				.ED
*--------------------------------------
MAN
SAVE BIN/EDIT.S
ASM