NEW
  AUTO 3,1

* close command

closef			ldy #$01				close all ?
				lda (A3L),y
				bne L4683			  	no, just one of them.
				
				sta cferr			 	clear global close error.
				lda #$00				start at the beginning.
L4654  			sta fcbptr			 	save current low byte of pointer.
				tay		 				get the level at which the file
				lda fcbbuf+27,y			was opened.
				cmp flevel			 	if file's level is < global level
				bcc L4675			 	then don't close.
				lda fcbbuf,y			is this reference file open ?
				beq L4675			  	no, try next.
				jsr flush2				clean it out...
				bcs L46B6			  	return flush errors.
				jsr close2				update fcb & vcb
				ldy #$01
				lda (A3L),y
				beq L4675			  	no error if close all.
				bcs L46B6			  	close error.
L4675  			lda fcbptr			 	inc pointer to next fcb
				clc
				adc #$20
				bcc L4654			  	branch if within same page.
				lda cferr			  	on final close report logged errors.
				beq L46B4			  	branch if errors.
				rts		 				(carry already set).
L4683  			jsr flush1				flush file 1st (including updating
				bcs L46B6			  	bitmap). branch if errors.

close2			ldy fcbptr
				lda fcbbuf+11,y			release file buffer
				jsr relbuffr
				bcs L46B6
				lda #$00
				ldy fcbptr
				sta fcbbuf,y			free fcb too
				lda fcbbuf+1,y
				sta devnum			 	go look for associated vcb
				jsr fnddvcb
				ldx vcbptr			 	get vcb pointer.
				dec vcbbuf+30,x			indicate one less file open.
				bne L46B4			  	branch if that wasn't the last...
				lda vcbbuf+17,x
				and #$7F			 	strip 'files open' bit
				sta vcbbuf+17,x
L46B4  			clc
				rts
L46B6  			bcs L46E6			  	don't report close all error now.

* flush command

flushf			ldy #$01				flush all ?
				lda (A3L),y
				bne flush1				no, just one of them.
				sta cferr			  	clear global flush error.
				lda #$00				start at the beginning.
L46C3  			sta fcbptr				save current low byte of pointer.
				tay		 				index to ref #.
				lda fcbbuf,y			is this reference file open ?
				beq L46D1			  	no, try next.
				jsr flush2			 	clean it out...
				bcs L46E6			  	return anty errors.
L46D1  			lda fcbptr			 	inc pointer to next fcb.
				clc
				adc #$20
				bcc L46C3			  	branch if within same page
L46D9  			clc
				lda cferr			  	on last flush,
				beq L46E0			  	branch if no logged errors.
				sec		 				report error now
L46E0  			rts

flush2			jsr fndfcbuf			must set up vcb & buffer locations 1st.
				bcc L46F1			  	branch if no error.
L46E6  			jmp glberr				error so check for close or flush all.

flush1			stz cferr				for normal refnum flush, clear global error.
				jsr findfcb				setup pointer to fcb user references.
				bcs L46E6			  	return any errors.
L46F1  			lda fcbbuf+9,y			test to see if file is modified.
				and #$02			 	is it write enabled ?
				beq L46D9			  	branch if 'read only'
				lda fcbbuf+28,y			has eof been modified ?
				bmi L4704			  	if yes.
				jsr gfcbstat			has data been modified ?
				and #$70			 	(was written to while it's been open?)
				beq L46D9			  	if not.
L4704  			jsr gfcbstat
				and #$40			 	does current data buffer need to be
				beq L4710			  	written ? branch if not.
				jsr wfcbdat				if so, go write it.
				bcs L46E6			  	if error.
L4710  			jsr gfcbstat			check to see if the index block (tree
				and #$80			 	files only) needs to be written.
				beq L471C			  	branch if not.
				jsr wfcbidx
				bcs L46E6			  	return any errors.
L471C  			lda #$06				prepare to update directory
				tax
				ora fcbptr
				tay
L4723  			lda fcbbuf,y			note: this code depends on the defined
				sta d_dev-1,x			order of the file control block and the
				dey		 				temporary directory area in 'work space'
				dex
				bne L4723
				sta devnum
				lda d_head				read the directory header for this file
				ldx d_head+1
				jsr rdblk			  	into the general purpose buffer.
				bcs L46E6			  	if error.
				jsr movhed0				move header info.
				lda d_entblk			get address of directory block that
				ldy d_entblk+1			contains the file entry.
				cmp d_head			 	test to see if it's the same block the
				bne L474E			  	header is in. branch if not.
				cpy d_head+1
				beq L4755			  	branch if header block = entry block
L474E  			sta bloknml
				sty bloknml+1
				jsr rdgbuf			 	get block with file entry in general
L4755  			jsr entcalc				buffer. set up pointer to entry.
				jsr moventry			move entry to temp entry buffer in
				ldy fcbptr			 	'work space'. update 'blocks used' count
				lda fcbbuf+24,y
				sta d_usage
				lda fcbbuf+25,y
				sta d_usage+1
				ldx #$00			 	and move in end of file mark whether
L476C  			lda fcbbuf+21,y		   	needed or not.
				sta d_eof,x
				inx
				cpx #$03			 	move all 3 bytes
				beq L4780
				lda fcbbuf+12,y			also move in the address of the file's
				sta d_filid,x			first block since it might have changed
				iny		 				since the file first opened.
				bne L476C			  	branch always.
L4780  			lda fcbbuf+5,y		  	the last thing to update is storage
				asl			  			type (y=fcbptr+2). shift into high
				asl			  			nibble.
				asl
				asl
				sta scrtch
				lda d_stor				get old type byte (might be the same).
				and #$0F			 	strip off old type,
				ora scrtch			 	add in the new type
				sta d_stor			 	and put it away.
				jsr drevise				go update directory.
				bcs glberr			  	error.
				ldy fcbptr			 	mark
				lda fcbbuf+28,y			fcb/directory
				and #$7F			 	as
				sta fcbbuf+28,y			undirty.
				lda d_dev			  	see if bitmap should be written.
				cmp bmadev			 	is it in same as current file ?
				bne L47B2			  	yes, put it on the disk if necessary.
				jsr upbmap			 	go put it away.
				bcs glberr			  	flush error
L47B2  			clc
				rts

* report error only if not a close all or flush all

glberr			ldy #$01
				pha
				lda (A3L),y
				bne L47C1				not an 'all' so report now
				clc
				pla
				sta cferr			  	save for later
				rts
L47C1  			pla
				rts
				
gfcbstat 		ldy fcbptr			 	index to fcb.
				lda fcbbuf+8,y			return status byte.
				rts
L47CA  			lda #$4E			 	access error
				sec
L47CD  			rts

seteof			jsr gfcbstyp			can only move end of tree, sapling or seed.
				cmp #$04			 	tree type ?
				bcs L47CA			  	if not then access error
				asl
				asl
				asl
				asl
				sta stortyp				may be used later.
				lda fcbbuf+9,y
				and #$02			 	is write enabled to set new eof ?
				beq L47CA			  	no, access error.
				jsr tstwprot			hardware write protected ?
				bcs L47CA			  	yes, access error.
				ldy fcbptr			 	save old eof so it can be seen
				iny		 				whether blocks need to be released
				iny		 				upon contraction.
				ldx #$02			 	all 3 bytes of the eof
L47EF  			lda fcbbuf+21,y
				sta oldeof,x
				dey
				dex
				bpl L47EF
				ldy #$04
				ldx #$02
L47FD  			lda (A3L),y				position mark to new eof
				sta tposll,x
				dey
				dex
				bpl L47FD
				ldx #$02			 	point to 3rd byte.
L4808  			lda oldeof,x			see if eof moved backwards so blocks
				cmp tposll,x			can be released.
				bcc eofset				(branch if not)
				bne purge			  	branch if blocks to be released
				dex
				bpl L4808			  	all 3 bytes
				
eofset			ldy #$04
				ldx fcbptr				place new end of file into fcb
				inx
				inx
L481C  			lda (A3L),y
				sta fcbbuf+21,x
				dex
				dey
				cpy #$02			 	all 3 bytes moved ?
				bcs L481C			  	no.
				jmp fcbused				mark fcb as dirty.
purge  			jsr flush1			 	make sure file is current
				bcs L47CD
				ldx datptr+1			pointer to index block
				inx
				inx
				stx zpt+1			  	(zero page conflict with dir buf ptr)
				ldx datptr
				stx zpt
				ldy fcbptr			 	check if eof < mark
				iny
				iny
				ldx #$02
L4840  			lda fcbbuf+18,y
				cmp tposll,x			compare until not equal or carry clear.
				bcc L485F			  	branch if eof > mark.
				bne L484E			  	branch if eof < mark.
				dey
				dex
				bpl L4840			  	compare all 3 bytes
L484E  			ldy fcbptr
				ldx #$00
L4853  			lda tposll,x			fake position, correct position will
				sta fcbbuf+18,y			be made below...
				iny
				inx
				cpx #$03			 	move all 3 bytes
				bne L4853
L485F  			jsr tkfrecnt			force free block count before releasing
				lda tposll			 	blocks. prepare for purge of excess...
				sta dseed			  	all blocks and bytes beyond new eof
				lda tposlh				 must be zero'd
				sta dsap
				and #$01
				sta dseed+1
				lda tposhi
				lsr
				sta dtree
				ror dsap			 	pass position in terms of block & bytes.
				lda dseed				now adjust for boundaries of $200
				ora dseed+1
				bne L48A2			  	branch if no adjustment necessary.
				lda dsap			 	get correct block ositions for sap
				sec		 				and tree levels.
				sbc #$01
				sta dsap			 	deallocate for last (phantom) block
				lda #$02			 	and don't modify last data block.
				bcs L489F			  	branch if tree level unaffected.
				dec dtree
				bpl L489F			  	branch if new eof not zero
				lda #$00
				sta dtree			 	otherwise, make a null seed out of it.
				sta dsap
L489F  			sta dseed+1
L48A2  			ldy fcbptr			 	also must pass file's 1st block address.
				lda fcbbuf+12,y
				sta firstbl
				lda fcbbuf+13,y
				sta firstbh
				stz deblock				lastly, initialize # of blocks to
				stz deblock+1			be free'd.
				jsr detree				deallocate blocks from tree.
				php		 				save any error status until fcb
				pha		 				is cleaned up.
				sec
				ldy fcbptr
				ldx #$00
L48C2  			lda firstbl,x
				sta fcbbuf+12,y			move in possible new first file block
				lda fcbbuf+24,y			address. adjust usage count also
				sbc deblock,x
				sta fcbbuf+24,y
				iny
				inx
				txa
				and #$01			 	test for both bytes adjusted
				bne L48C2			  	without disturbing carry.
				lda stortyp				get possibly modified storage type
				lsr
				lsr
				lsr
				lsr
				ldy fcbptr			 	and save it in fcb.
				sta fcbbuf+7,y
				jsr clrstats			make it look as though position has
				jsr dvcbrev				nothing allocated, update total blocks
				ldy fcbptr			 	in fcb and correct position.
				iny
				iny
				ldx #$02
L48F2  			lda fcbbuf+18,y			tell 'rdposn' to go to correct
				sta tposll,x
				eor #$80			 	position from incorrect place.
				sta fcbbuf+18,y
				dey
				dex
				bpl L48F2
				jsr rdposn			 	go to correct position.
				bcc L490D			  	if no error.
				tax		 				otherwise, report latest error.
				pla
				plp
				txa		 				restore latest error code to stack
				sec
				php
				pha		 				save new error.

* mark file as in need of a flush and update fcb with new end of file,
* then flush it.

L490D  			jsr eofset				go mark and update
				jsr flush1				then go do the flush.
				bcc L491C			  	branch if no error.
				tax		 				save latest error.
				pla		 				clean previous error off stack
				plp
				txa		 				and restore latest error to stack.
				sec		 				show error condition.
				php		 				restore error status to stack
				pha		 				and the error code.
L491C  			pla		 				report any errors that may have
				plp		 				appeared.
				rts

geteof			ldx fcbptr				index to end of file mark
				ldy #$02			 	and index to user's call parameters
L4924  			lda fcbbuf+21,x
				sta (A3L),y
				inx
				iny
				cpy #$05
				bne L4924			  	loop until all 3 bytes moved
				clc		 				no errors
				rts

newline			ldy #$02				adjust newline status for open file.
				lda (A3L),y				on or off ?
				ldx fcbptr			 	it will be 0 if off.
				sta fcbbuf+31,x			set new line mask
				iny
				lda (A3L),y				and move in 'new-line' byte
				sta fcbbuf+10,x
				clc		 				no error possible
				rts

getinfo			jsr findfile			look for file.
				bcc L4988			  	no error.
				cmp #$40			 	was it a root directory file ?
				sec		 				(in case of no match)
				bne L49A4			  	if not, then error.
				lda #$F0
				sta d_stor			 	for get info, report proper storage
				stz reql			 	type. forca a count of free blocks.
				stz reqh
				ldx vcbptr
				jsr tkfrecnt			get a fresh count of free blocks on
				ldx vcbptr			 	this volume.
				lda vcbbuf+21,x			return total blocks and total in use.
				sta reqh			 	1st transfer 'free' blocks to zpage
				lda vcbbuf+20,x			for later subtraction to determine
				sta reql			 	the 'used' count.
				lda vcbbuf+19,x			transfer to 'd.' table as aux id
				sta d_auxid+1			(total block count is considered aux id
				pha		  				for the volume)
				lda vcbbuf+18,x
				sta d_auxid
				sec		 				subtract and report the number of
				sbc reql			 	blocks 'in use'
				sta d_usage
				pla
				sbc reqh
				sta d_usage+1
L4988  			lda d_stor			 	transfer bytes from internal order to
				lsr			  			call spec via 'inftabl' translation
				lsr			  			table but first change storage type to
				lsr			  			external (low nibble) format.
				lsr
				sta d_stor
				ldy #$11			 	index to last of user's spec table.
L4994  			lda inftabl-3,y
				and #$7F			 	strip bit used by setinfo
				tax
				lda d_stor,x			move directory info to call spec. table
				sta (A3L),y
				dey
				cpy #$03
				bcs L4994			  	if all info bytes moved, retn carry clr
L49A4  			rts

setinfo			jsr findfile			get the file to work on.
				bcs L49CF			  	if error.
				lda bubit			  	see if backup bit can be cleared
				eor #$20
				and d_attr
				and #$20
				sta bkbitflg			or preserve current...
				ldy #$0D			 	init pointer to user supplied list.
L49B9  			ldx inftabl-3,y		   	get index to corresponding 'd.' table.
				bmi L49C3			  	branch if parameter can't be set.
				lda (A3L),y
				sta d_stor,x
L49C3  			dey		 				has user's request been satisfied ?
				cpy #$03
				bcs L49B9			  	no, move next byte.
				and #$18				make sure no illegal access bits were
				beq L49D0			  	set !! branch if legal access.
				lda #$4E			 	otherwise, access error.
				sec
L49CF  			rts
L49D0  			ldy #$0B
				lda (A3L),y				was clock null input ?
				beq L49D9			  	if yes.
				jmp drevise1			end by updating directory.
L49D9  			jmp drevise				update with clock also...

rename			jsr lookfile			look for source (original) file.
				bcc L4A1E			  	if found.
				cmp #$40			 	trying to rename a volume ?
				bne L49FD			  	no, return error.
				jsr renpath				syntax new name.
				bcs L49FD			  	rename error.
				ldy pathbuf				find out if only rootname for new name
				iny
				lda pathbuf,y			must be $FF if volume name only.
				bne L4A72			  	if not single name
				ldx vcbptr			 	check for open files before changing.
				lda vcbbuf+17,x
				bpl L49FF			  	if volume not busy.
				lda #$50			 	file busy error.
L49FD  			sec
				rts
L49FF  			ldy #$00			 	get newname's length
				lda pathbuf,y
				ora #$F0			 	(root file storage type)
				jsr mvrotnam			update root directory.
				bcs L4A74			  	rename error.
				ldy #$00
				ldx vcbptr			 	update vcb also.
L4A10  			lda pathbuf,y			move new name to vcb.
				beq L4A1C
				sta vcbbuf,x
				iny		 				next character
				inx
				bne L4A10			  	always.
L4A1C  			clc		 				no errors
				rts
L4A1E  			jsr getnamptr			set y = 1st char of path, x = 0.
L4A21  			lda pathbuf,y		   	move original name to gbuf
				sta gbuf,x			 	for later comparison to new name.
				bmi L4A2D			  	if last character has been moved
				iny		 				otherwise, get the next one.
				inx
				bne L4A21			  	always.
L4A2D  			jsr renpath				get new name syntaxed.
				bcs L4A74			  	rename error.
				jsr getnamptr		   	set y = path, x = 0.
				lda pathbuf,y			now compare new name with old name
L4A38  			cmp gbuf,x			 	to make sure they are in the same dir.
				php		 				save result of comparison.
				and #$F0			 	was last char really a count ?
				bne L4A46			  	if not.
				sty rnptr			  	save pointer to next name, it might
				stx namptr				be the last.
L4A46  			plp		 				result of last comparison ?
				bne L4A52			  	branch if different character or count.
				inx		 				bump pointers.
				iny
				lda pathbuf,y			was it the last character ?
				bne L4A38			  	if not.
				clc		 				no operation, names were the same.
				rts
L4A52  			ldy rnptr			  	index to last name in the chain.
				lda pathbuf,y			get last name length.
				sec
				adc rnptr
				tay
				lda pathbuf,y			this byte should be $00 !
				bne L4A72			  	if not, bad path error.
				ldx namptr			 	index to last of original name
				lda gbuf,x
				sec
				adc namptr
				tax
				lda gbuf,x			 	this byte should also be $00.
				beq L4A76			  	if so, continue processing.
L4A72  			lda #$40			 	bad pathname error.
L4A74  			sec
				rts
L4A76  			jsr lookfile			test for duplicate file name.
				bcs L4A7F			  	branch if file not found, which is ok !!
				lda #$47			 	duplicate name error.
				sec
				rts
L4A7F  			cmp #$46			 	was it a valid file not found ?
				bne L4A74			  	no, rename error.
				jsr setpath				syntax pathname of file to be changed.
				jsr findfile			get all the info on this file.
				bcs L4A74			  	rename error.
				jsr tstopen				is file in use ?
				lda #$50			 	anticipate file busy error.
				bcs L4A74			  	error if in use.
				lda d_attr			 	test bit which allows rename.
				and #$40
				bne L4A9D			  	branch if ok to rename
				lda #$4E			 	otherwise, illegal access.
L4A9B  			sec
				rts
L4A9D  			lda d_stor				find out which storage type.
				and #$F0			 	strip off name length.
				cmp #$D0			 	is it a directory ?
				beq L4AAE			  	then ok.
				cmp #$40			 	is it a seed, sapling or tree ?
				bcc L4AAE			  	then ok.
				lda #$4A			 	file incompatible error.
				bne L4A9B			  	always.
L4AAE  			jsr renpath				since both names go into the directory,
				bcs L4A74			  	syntax the new name to get the local
				ldy rnptr			  	name address. y = index to local name
				ldx pathbuf,y			length. adj y to last char of new name.				tya
				tya
				adc pathbuf,y
				tay
L4ABE  			lda pathbuf,y			move local name to dir entry workspace.
				sta d_stor,x
				dey
				dex
				bne L4ABE
				lda d_stor			 	preserve file storage type.
				and #$F0			 	strip off old name length.
				tax
				ora pathbuf,y			add in new name's length.
				sta d_stor
				cpx #$D0			 	that file must be changed also.
				bne L4AF0			  	branch if not directory type.
				lda d_frst			 	read in 1st header block of subdir
				ldx d_frst+1
				jsr rdblk
				bcs L4A74			  	errors.
				ldy rnptr			  	change the header's name to match the
				lda pathbuf,y			owner's new name. get local name length.
				ora #$E0				assume it's a header.
				jsr mvrotnam
				bcs L4A74
L4AF0  			jmp drevise1			end by updating all path directories.

mvrotnam 		ldx #$00
L4AF5  			sta gbuf+4,x
				inx
				iny
				lda pathbuf,y
				bne L4AF5
				jmp wrtgbuf				write changed header block.
				
renpath			ldy #$03			 	get address to new pathname
				lda (A3L),y
				iny
				sta zpt
				lda (A3L),y				set up for syntaxing routine (synpath)
				sta zpt+1
				jmp synpath				do syntax (returns y = local namelength)

getnamptr 		ldy #$00				return pointer to 1st name of path.
				bit prfxflg				is this a prefixed name ?
				bmi L4B1A			  	branch if not.
				ldy newpfxptr
L4B1A  			ldx #$00
				rts

MAN
SAVE usr/src/prodos.203/prodos.s.xdos.e
LOAD usr/src/prodos.203/prodos.s
ASM