PR#3
PREFIX /A2OSX.SRC
NEW
INC 1
AUTO 6
				.LIST OFF	
				.OP	65C02
				.OR	$2000
				.TF /A2OSX.BOOT/DRV/UTHERNET2.DRV
*--------------------------------------
				.INB INC/MACROS.I
				.INB INC/A2OSX.I
				.INB INC/LIBTCPIP.I
*--------------------------------------
ZPTmpPTR		.EQ ZPDRV
*--------------------------------------
				.MA AR.SELECT
				lda /W5100.AR.]1
				sta W5100.AR-$81,x
				lda #W5100.AR.]1
				sta W5100.AR-$80,x
				.EM
*--------------------------------------
* WIZnet W5100 IO Registers
*--------------------------------------
W5100.MR		.EQ	$C080   			Mode Register
W5100.MR.RST	.EQ %10000000
W5100.MR.PB		.EQ %00010000
W5100.MR.PPPOE	.EQ %00001000
W5100.MR.AI		.EQ %00000010
W5100.MR.IND	.EQ %00000001
W5100.AR		.EQ	$C081				Memory Pointer
W5100.AR.GAR		.EQ $0001
W5100.AR.SUBR		.EQ $0005
W5100.AR.SHAR		.EQ $0009
W5100.AR.SIPR		.EQ $000F
W5100.AR.IR			.EQ $0015
W5100.AR.IMR		.EQ $0016
W5100.AR.RTR		.EQ $0017
W5100.AR.RCR		.EQ $0019
W5100.AR.RMSR		.EQ $001A
W5100.AR.TMSR		.EQ $001B
W5100.AR.PATR		.EQ $001C
W5100.AR.PTIMER		.EQ $0028
W5100.AR.PMAGIC		.EQ $0029
W5100.AR.UIPR		.EQ $002A
W5100.AR.UPORT		.EQ $002E
W5100.AR.S0.MR		.EQ $0400
W5100.AR.S0.CR		.EQ $0401
W5100.AR.S0.IR		.EQ $0402
W5100.AR.S0.SR		.EQ $0403
W5100.AR.S0.PORT	.EQ $0404
W5100.AR.S0.DHAR	.EQ $0406
W5100.AR.S0.DIPR	.EQ $040C
W5100.AR.S0.DPORT	.EQ $0410
W5100.AR.S0.MSSR	.EQ $0412
W5100.AR.S0.PROTO	.EQ $0414
W5100.AR.S0.TOS		.EQ $0415
W5100.AR.S0.TTL		.EQ $0416
W5100.AR.S0.TX.FSR	.EQ $0420
W5100.AR.S0.TX.RD	.EQ $0422
W5100.AR.S0.TX.WR	.EQ $0424
W5100.AR.S0.RX.RSR	.EQ $0426
W5100.AR.S0.RX.RD	.EQ $0428
W5100.DR			.EQ	$C083
*--------------------------------------
ERRTNOFRAME		.EQ 0
ERRNOBUFFER		.EQ 1
ERRTIMEOUT		.EQ 2
*--------------------------------------
*			File Header (16 Bytes)
*--------------------------------------
CS.START		cld
				jmp Dev.Detect			cld,jmp abs=DRV
				.DA #$61				6502,Level 1 (65c02)
				.DA #1					DRV Layout Version 1
				.DA 0
				.DA CS.END-CS.START			Code Length
				.DA DEV.HEADER-CS.START		Device Header Offset
				.DA DRV.CS.START-CS.START	Driver Code Offset
				.DA DRV.CS.END-DRV.CS.START	Drv Code Length
*--------------------------------------
* Relocation Table
*--------------------------------------
L.MSG.DETECT	.DA MSG.DETECT
L.MSG.DETECT.OK	.DA MSG.DETECT.OK
L.MSG.DETECT.KO	.DA MSG.DETECT.KO
L.DEV.HEADER.NAME	.DA DEV.HEADER.NAME
				.DA 0					End Of Reloc Table
*--------------------------------------
Dev.Detect		sta hArgs
				>LDYA L.MSG.DETECT
				>SYSCALL SYS.PSTROutYA
				
				ldx #$10+$81
.1				stx DEVSLOTxF
				lda #W5100.MR.RST
				sta W5100.MR-$81,x

				lda #W5100.MR.AI+W5100.MR.IND
				sta W5100.MR-$81,x
 
				lda W5100.MR-$81,x
				cmp #W5100.MR.AI+W5100.MR.IND
				beq	.3
				
				inc DEV.HEADER.NAME+4
				txa
				clc
				adc #$10
				tax
				cpx #$80+$81
				bne .1
				
				lda #DEVMGR.ERRNOHW
				sec
				rts
				
.3				lda hARGS
				
				beq .4
				>SYSCALL SYS.GetMemPtrA
				>STYA ZPTmpPTR
				jsr DecodeMac
				bcc .4
				lda #DEVMGR.ERRICL
				sec
				rts
				
.4				clc
				rts
*--------------------------------------
DecodeMac		lda (ZPTmpPTR)
				cmp #12
				bne .9
				
				ldy #1
				ldx #0
				
.1				lda (ZPTmpPTR),y
				jsr Asc2NibbleA
				bcs .9
				
				asl
				asl
				asl
				asl
				sta MAC,x
				
				iny
				lda (ZPTmpPTR),y
				jsr Asc2NibbleA
				bcs .9
				
				ora MAC,x
				sta MAC,x
				inx
				iny
				cpy #13
				bne .1
				
				clc
				rts
				
.9				sec
				rts
*--------------------------------------
Asc2NibbleA		cmp #$30
				bcc .9
				cmp #$3A
				bcs .1
				and #$0F
				clc
				rts	
.1				cmp #$41
				bcc .9
				cmp #$47
				bcs .9
				sbc #$36
				clc
				rts
.9				sec
				rts			
*--------------------------------------
CS.END
MSG.DETECT		>PSTRING "UtherNetII/W5100 Driver.\n"
MSG.DETECT.OK	>PSTRING "UtherNetII/W5100 Installed As Device : "
MSG.DETECT.KO	>PSTRING "Hardware Not Found.\n"
hArgs			.BS 1
*--------------------------------------
*			Device Header (16 Bytes)
*--------------------------------------
DEV.HEADER		cld
				jmp (DRV.CS.START,x)
				.DA #S.DEV.F.SHARE+S.DEV.F.EVENT
DEV.HEADER.NAME	>PSTRING "ETH1"			NAME			
				.HS 00.00
				.HS 00.00.00.00
*--------------------------------------
*			Driver Code
*--------------------------------------
DRV.CS.START	.DA OPEN
				.DA GETEVENT
				.DA $FFFF				no COUT
				.DA CLOSE
				.DA GETINFO
				.DA $FFFF				no IRQ
				.DA SEND
L.DEVINFO		.DA DEVINFO
				.DA 0					end or relocation
*--------------------------------------
* input :
* none
* output :
* CC on success
* CS on error
*--------------------------------------				
OPEN			jsr Reset
				>AR.SELECT SHAR
				
				ldy	#0
.1				lda MAC,y
				sta W5100.DR-$81,x
				iny
				cpy #6
				bne .1
				
				>AR.SELECT RMSR
				lda #3					8k
				sta W5100.DR-$81,x		...for Socket0 RX Buffer
				sta W5100.DR-$81,x		...for Socket0 TX Buffer

				>AR.SELECT S0.MR
				lda #3					IPRAW
				sta W5100.DR-$81,x		for S0.MR
				lda #1					OPEN
				sta W5100.DR-$81,x		for S0.CR
				clc
				rts
*--------------------------------------
* input :
*  pEvent
* output :
* CC no event
* CS event
*--------------------------------------				
GETEVENT		ldx DEVSLOTxF



				bne GETEVENT.RxOK
				lda #ERRTNOFRAME
				sec
				rts
GETEVENT.RxOK	
				>STYA FRAMELEN
				>PUSHYA
				>PUSHBI 0
				>SYSCALL SYS.GetMem
				bcs .99
				>STYA ZPTmpPTR
				txa
				ldy #S.EVT.DATALO
				sta (pEvent),y
				ldy #S.EVT.DATAW1
				lda FRAMELEN
				sta (pEvent),y
				iny
				lda FRAMELEN+1
				sta (pEvent),y
				lda #S.EVT.F.NET+S.EVT.F.hMEM1
				sta (pEvent)
				ldy #0
				ldx DEVSLOTxF
				
.8				clc
				rts
				
.99				sec				
				rts
*--------------------------------------
CLOSE			jsr Reset
				clc
				rts
*--------------------------------------				
*  in:
*  out:
*   Y,A = BUFFER PTR
* 	CC on success
* 	CS on error
*--------------------------------------
GETINFO			>LDYA L.DEVINFO
				clc
				rts
*--------------------------------------				
*  in:
* 	PULLW = FRAME PTR
*   PULLW = FRAME LEN
*  out:
* 	CC on success
* 	CS on error
*--------------------------------------				
SEND			>PULLW ZPTmpPTR
				>PULLW FRAMELEN

				ldx DEVSLOTxF
				bra *
				lda #ERRTIMEOUT
				sec
				rts
.9				bra *
				lda #ERRNOBUFFER
				sec
				rts
				
SENDPREADY		ldy #0
.1				lda	(ZPTmpPTR),y

				iny
				bne .2
				inc ZPTmpPTR+1
.2				jsr DecFrameLen
				beq .8
.3				lda	(ZPTmpPTR),y


				iny
				bne .5
				inc ZPTmpPTR+1
.5				jsr DecFrameLen
				bne .1
.8				clc
				rts	
*--------------------------------------
SETIPCFG		>PULLW ZPTmpPTR
				
				>AR.SELECT GAR
				
				ldx DEVSLOTxF
				
				ldy #S.IPCFG.GW
.1				lda (ZPTmpPTR),y
				sta W5100.DR-$81,x
				iny
				cpy #S.IPCFG.GW+4
				bne .1
				
*				>AR.SELECT SUBR			Implicit, next to GAR
				
				ldy #S.IPCFG.MASK
.2				lda (ZPTmpPTR),y
				sta W5100.DR-$81,x
				iny
				cpy #S.IPCFG.MASK+4
				bne .2
				
				>AR.SELECT SIPR
				
				ldy #S.IPCFG.IP
.3				lda (ZPTmpPTR),y
				sta W5100.DR-$81,x
				iny
				cpy #S.IPCFG.IP+4
				bne .3
				
				clc
				rts
*--------------------------------------
* 				PRIVATE
*--------------------------------------
Reset			ldx DEVSLOTxF
				lda #W5100.MR.RST
				sta W5100.MR-$81,x
				rts
*--------------------------------------	
DecFrameLen		lda FRAMELEN
				bne .1
				lda FRAMELEN+1
				beq .8
				dec FRAMELEN+1
.1				dec FRAMELEN
				lda #1					Make something NZ
.8				rts
*--------------------------------------	
DRV.CS.END
*--------------------------------------	
DEVSLOTxF		.BS 1
FRAMELEN		.BS 2
*--------------------------------------	
DEVINFO			.DA #S.DEVINFO.TYPE.NET
DEVFLAGS		.DA #DEVMGR.NET.CAP.ARPOFFLOAD
MAC				.BS 6
LINK.STATUS		.BS 1
LINK.SPEED		.BS 1					SPEED/DUPLEX
*--------------------------------------
MAN
SAVE DRV/UTHERNET2.DRV.S
ASM