NEW AUTO 3,1 .LIST OFF .OP 65C02 .OR $2000 .TF drv/uther2.ai.drv *-------------------------------------- .INB inc/macros.i .INB inc/a2osx.i .INB inc/kernel.i .INB inc/mli.e.i .INB inc/nic.i .INB inc/nic.w5100.i .INB inc/eth.i .INB inc/net.tcpip.i .INB inc/libtcpip.i *-------------------------------------- ZPArgPtr .EQ ZPBIN DEVSLOT0x .EQ ZPBIN+2 *-------------------------------------- * File Header (16 Bytes) *-------------------------------------- CS.START cld jmp Dev.Detect cld,jmp abs=DRV .DA #$61 6502,Level 1 (65c02) .DA #1 DRV Layout Version 1 .DA 0 .DA CS.END-CS.START Code Length .DA 0 .DA 0 .DA 0 *-------------------------------------- * Relocation Table *-------------------------------------- L.MSG.DETECT .DA MSG.DETECT L.MSG.DETECT.OK .DA MSG.DETECT.OK L.MSG.DETECT.KO .DA MSG.DETECT.KO L.DRV.CS.START .DA DRV.CS.START L.FD.DEV .DA FD.DEV L.FD.DEV.NAME .DA FD.DEV.NAME L.SSCANF.MAC .DA SSCANF.MAC L.MAC0 .DA DCB+S.DCB.NIC.MAC L.MAC1 .DA DCB+S.DCB.NIC.MAC+1 L.MAC2 .DA DCB+S.DCB.NIC.MAC+2 L.MAC3 .DA DCB+S.DCB.NIC.MAC+3 L.MAC4 .DA DCB+S.DCB.NIC.MAC+4 L.MAC5 .DA DCB+S.DCB.NIC.MAC+5 .DA 0 End Of Reloc Table *-------------------------------------- Dev.Detect >STYA ZPArgPtr >LDYA L.MSG.DETECT >SYSCALL PutS ldx #$70+$88 ldy #7 .1 lda A2osX.S,y IO based detection, avoid scanning in Disk Controller IO!!!! bne .2 lda #W5100.MR.RST sta W5100.MR,x lda #0 .10 dec give some time.... bne .10 lda #W5100.MR.PB+W5100.MR.AI+W5100.MR.IND sta W5100.MR,x pha pla lda W5100.MR,x cmp #W5100.MR.PB+W5100.MR.AI+W5100.MR.IND bne .2 >AR.SELECT RTR lda W5100.DR,x Get RTR HI cmp /2000 bne .2 lda W5100.DR,x Get RTR LO cmp #2000 beq .3 .2 dec FD.DEV.NAME+3 txa sec sbc #$10 tax dey bne .1 >LDYA L.MSG.DETECT.KO >SYSCALL PutS lda #MLI.E.NODEV sec rts .3 stx DEVSLOTx0 sty DEVSLOT0x jsr Dev.ParseArgs bcs .99 >PUSHW L.MSG.DETECT.OK >PUSHW L.FD.DEV.NAME >PUSHBI 2 >SYSCALL PrintF >PUSHWI DRV.END >PUSHWI DRV.CS.END-DRV.CS.START >PUSHWI DRV.CS.START >LDYA L.DRV.CS.START >SYSCALL InsDrv .99 bcs .9 >STYA FD.DEV+S.FD.DEV.DRVPTR >PUSHW L.FD.DEV >PUSHW L.FD.DEV.NAME >SYSCALL MKDev bcs .9 ldx DEVSLOT0x lda #A2osX.S.NIC sta A2osX.S,x * clc .9 rts *-------------------------------------- Dev.ParseArgs lda (ZPArgPtr) bne .1 lda A2osX.RANDOM16 eor A2osX.TIMER16 sta DCB+S.DCB.NIC.MAC+3 eor A2osX.RANDOM16+1 sta DCB+S.DCB.NIC.MAC+4 eor A2osX.TIMER16+1 sta DCB+S.DCB.NIC.MAC+5 clc rts .1 >PUSHW ZPArgPtr >PUSHW L.SSCANF.MAC ldx #0 .2 >PUSHW L.MAC0,x inx inx cpx #12 bne .2 >PUSHBI 12 6 x byte PTRs >SYSCALL SScanF bcc .8 lda #E.SYN * sec .8 rts *-------------------------------------- CS.END ARGS .BS 2 MSG.DETECT .CZ "UtherNet2/W5100 Driver (ARP/IP Offload)." MSG.DETECT.OK .CZ "UtherNet2/W5100 Installed As Device : %s\r\n" MSG.DETECT.KO .CZ "Hardware Not Found." SSCANF.MAC .CZ "%h:%h:%h:%h:%h:%h" *-------------------------------------- FD.DEV .DA #S.FD.T.CDEV .DA #0 HANDLER .DA #0 BUSID .DA #0 DEVID .DA 0 BUSPTR .BS 2 DRVPTR .DA 0 DCBPTR .DA 0 BUFPTR FD.DEV.NAME .AZ "eth7" *-------------------------------------- * Driver Code *-------------------------------------- ZPIOCTL .EQ ZPDRV ZPBufPtr .EQ ZPDRV+2 Counter .EQ ZPDRV+4 Offset .EQ ZPDRV+6 RXTX.Size .EQ ZPDRV+8 BUF.Size .EQ ZPDRV+10 RX.IP .EQ ZPDRV+12 (4) Sn.IO .EQ ZPDRV+16 Sn.BASE .EQ ZPDRV+17 Sn.MASK .EQ ZPDRV+18 *-------------------------------------- DRV.CS.START cld jmp (.1,x) .1 .DA STATUS .DA A2osX.BADCALL .DA A2osX.BADCALL .DA A2osX.BADCALL .DA CONTROL .DA A2osX.BADCALL .DA OPEN .DA CLOSE .DA READ .DA WRITE .DA 0 end or relocation *-------------------------------------- STATUS jsr GET.IOCTLBUFPTR ldy #S.IOCTL.S lda (ZPIOCTL),y beq .1 cmp #S.IOCTL.S.GETDIB bne STATUS.DCB ldy #S.DIB-1 .HS 2C bit abs .1 ldy #3 .2 lda DIB,y sta (ZPBufPtr),y dey bpl .2 clc rts STATUS.DCB cmp #S.IOCTL.S.GETDCB bne STATUS.9 ldy #S.DCB.NIC-1 .1 lda DCB,y sta (ZPBufPtr),y dey bpl .1 clc rts STATUS.9 lda #MLI.E.BADCTL sec rts *-------------------------------------- CONTROL jsr GET.IOCTLBUFPTR ldy #S.IOCTL.C lda (ZPIOCTL),y cmp #S.IOCTL.C.SETDCB bne STATUS.9 ldy #S.DCB.NIC-1 .2 lda (ZPBufPtr),y sta DCB,y dey bpl .2 bra OPEN.I *-------------------------------------- OPEN lda #S.DIB.S.OPENED bit DIB+S.DIB.S beq OPEN.I lda #MLI.E.OPEN sec rts OPEN.I jsr CLOSE * ldx DEVSLOTx0 Done by CLOSE lda #W5100.MR.PB+W5100.MR.AI+W5100.MR.IND sta W5100.MR,x >AR.SELECT SHAR ldy #0 .1 lda DCB+S.DCB.NIC.MAC,y sta W5100.DR,x iny cpy #6 bne .1 >AR.SELECT GAR ldy #0 .2 lda DCB+S.DCB.NIC.GW,y sta W5100.DR,x iny cpy #4 bne .2 >AR.SELECT SUBR Implicit, next to GAR ldy #0 .3 lda DCB+S.DCB.NIC.MASK,y sta W5100.DR,x iny cpy #4 bne .3 >AR.SELECT SIPR ldy #0 .4 lda DCB+S.DCB.NIC.IP,y sta W5100.DR,x iny cpy #4 bne .4 >AR.SELECT RMSR lda #%01010101 RAW=2k,ICMP=2k,UDP=2k,TCP=2k sta W5100.DR,x ...for Socket RX Buffers sta W5100.DR,x ...for Socket TX Buffers >AR.SELECT S0.MR lda #W5100.AR.Sn.MR.MACRAW+W5100.AR.Sn.MR.MF sta W5100.DR,x >AR.SELECT S0.CR lda #W5100.AR.Sn.CR.OPEN sta W5100.DR,x *-------------------------------------- lda /W5100.AR.S1.MR sta Sn.IO ldy #S.IP.PROTOCOL.ICMP jsr OPEN.SnY inc Sn.IO ldy #S.IP.PROTOCOL.TCP jsr OPEN.SnY inc Sn.IO ldy #S.IP.PROTOCOL.UDP jsr OPEN.SnY lda #S.DIB.S.OPENED tsb DIB+S.DIB.S clc rts *-------------------------------------- OPEN.SnY phy >AR.Sn.SELECT S0.MR lda #W5100.AR.Sn.MR.IPRAW sta W5100.DR,x >AR.Sn.SELECT S0.PORT stz W5100.DR,x stz W5100.DR,x * >AR.Sn.SELECT S0.DHAR * ldy #6 DHAR * lda #$EE *.1 sta W5100.DR,x * dey * bne .1 * >AR.Sn.SELECT S0.DIPR * ldy #4 DIPR *.2 stz W5100.DR,x * dey * bne .2 >AR.Sn.SELECT S0.DPORT stz W5100.DR,x stz W5100.DR,x >AR.Sn.SELECT S0.MSSR lda /K.ETH.FRAME.LEN sta W5100.DR,x lda #K.ETH.FRAME.LEN sta W5100.DR,x >AR.Sn.SELECT S0.PROTO pla sta W5100.DR,x >AR.Sn.SELECT S0.TOS stz W5100.DR,x >AR.Sn.SELECT S0.TTL lda #K.IP.TTL sta W5100.DR,x >AR.Sn.SELECT S0.CR lda #W5100.AR.Sn.CR.OPEN sta W5100.DR,x rts *-------------------------------------- CLOSE ldx DEVSLOTx0 lda #W5100.MR.RST sta W5100.MR,x lda $C019 we can use VBL as we are not on //c .1 eor $C019 bpl .1 lda $C019 .2 eor $C019 bpl .2 lda #S.DIB.S.OPENED trb DIB+S.DIB.S clc rts *-------------------------------------- READ php sei >STYA ZPIOCTL ldx DEVSLOTx0 ldy #Sn.Cnt-1 .1 lda Sn.IO.BASE,y sta Sn.IO sta W5100.AR,x lda #W5100.AR.S0.RX.RSR sta W5100.AR+1,x lda W5100.DR,x get the received size HI ora W5100.DR,x LO beq .2 jmp READ.IPRAW .2 dey bne .1 lda /W5100.AR.S0.RX.RSR sta W5100.AR,x lda #W5100.AR.S0.RX.RSR sta W5100.AR+1,x lda W5100.DR,x get the received size HI ora W5100.DR,x LO bne READ.RAW .9 jmp READWRITE.NODATA *-------------------------------------- READ.RAW >AR.SELECT S0.RX.RD lda W5100.DR,x get the received ptr HI sta Offset+1 ldy W5100.DR,x get the received ptr LO sty Offset and /$7FF ora /RX.BASE sta W5100.AR,x tya sta W5100.AR+1,x lda W5100.DR,x get RX.Size HI (Frame size + 2) sta RXTX.Size+1 lda W5100.DR,x get RX.Size LO sta RXTX.Size ldy #S.IOCTL.BYTECNT sec sbc #2 MACRAW:strip 2 bytes Header from Size sta (ZPIOCTL),y sta BUF.Size eor #$ff sta Counter lda RXTX.Size+1 sbc #0 iny sta (ZPIOCTL),y sta BUF.Size+1 eor #$ff sta Counter+1 >LDYA BUF.Size >SYSCALL2 GetMem bcc .14 jmp READWRITE.9 .14 >STYA ZPBufPtr phx phy ldy #S.IOCTL.BUFPTR+1 sta (ZPIOCTL),y dey pla sta (ZPIOCTL),y ldy #0 ldx DEVSLOTx0 .2 inc Counter bne .3 inc Counter+1 beq .4 .3 lda W5100.DR,x sta (ZPBufPtr),y iny bne .2 inc ZPBufPtr+1 bra .2 .4 >AR.SELECT S0.RX.RD lda Offset clc adc RXTX.Size pha save LO lda Offset+1 adc RXTX.Size+1 sta W5100.DR,x write HI pla sta W5100.DR,x write LO >AR.SELECT S0.CR lda #W5100.AR.Sn.CR.RCVD sta W5100.DR,x pla hMem plp clc rts *-------------------------------------- READ.IPRAW lda Sn.IP.PROTOCOL,y sta FRM.HDR.PROTO lda Sn.RX.BASE,y sta Sn.BASE lda Sn.RXTX.MASK,y sta Sn.MASK >AR.Sn.SELECT S0.RX.RD lda W5100.DR,x get the received ptr HI sta Offset+1 ldy W5100.DR,x get the received ptr LO sty Offset and Sn.MASK ora Sn.BASE sta W5100.AR,x tya sta W5100.AR+1,x ldy #0 .10 lda W5100.DR,x IPRAW:Get Source IP sta RX.IP,y iny cpy #4 bne .10 lda W5100.DR,x get RX.Size HI (not including 6 bytes Header) sta RXTX.Size+1 eor #$ff sta Counter+1 lda W5100.DR,x get RX.Size LO sta RXTX.Size eor #$ff sta Counter eor #$ff clc adc #S.IP sta BUF.Size ldy #S.IOCTL.BYTECNT sta (ZPIOCTL),y lda RXTX.Size+1 adc /S.IP sta BUF.Size+1 iny sta (ZPIOCTL),y lda RXTX.Size clc adc #6 IPRAW: Add 6 bytes to Total Size sta RXTX.Size bcc .11 inc RXTX.Size+1 .11 lda RXTX.Size clc adc #S.IP-S.ETH.EII sta FRM.HDR.IPLEN+1 lda RXTX.Size+1 adc /S.IP-S.ETH.EII sta FRM.HDR.IPLEN >LDYA BUF.Size >SYSCALL2 GetMem bcc .14 jmp READWRITE.9 .14 >STYA ZPBufPtr phx phy ldy #S.IOCTL.BUFPTR+1 sta (ZPIOCTL),y dey pla sta (ZPIOCTL),y ldy #S.ETH.EII.TYPE .15 lda FRM.HDR-S.ETH.EII.TYPE,y sta (ZPBufPtr),y iny cpy #S.ETH.EII.TYPE+FRM.HDR.LEN bne .15 ldx #3 ldy #S.IP.SRC+3 .12 lda RX.IP,x sta (ZPBufPtr),y dey dex bpl .12 ldx #3 ldy #S.IP.DST+3 .13 lda DCB+S.DCB.NIC.IP,x sta (ZPBufPtr),y dey dex bpl .13 ldy #S.IP ldx DEVSLOTx0 .2 inc Counter bne .3 inc Counter+1 beq .4 .3 lda W5100.DR,x sta (ZPBufPtr),y iny bne .2 inc ZPBufPtr+1 bra .2 .4 >AR.Sn.SELECT S0.RX.RD lda Offset clc adc RXTX.Size pha save LO lda Offset+1 adc RXTX.Size+1 sta W5100.DR,x write HI pla sta W5100.DR,x write LO >AR.Sn.SELECT S0.CR lda #W5100.AR.Sn.CR.RCVD sta W5100.DR,x pla hMem plp clc rts *-------------------------------------- READWRITE.NODATA lda #E.NODATA READWRITE.9 plp sec rts *-------------------------------------- WRITE php sei jsr GET.IOCTLBUFPTR ldy #S.IOCTL.BYTECNT lda (ZPIOCTL),y sec sbc #S.IP sta RXTX.Size eor #$ff sta Counter iny lda (ZPIOCTL),y sbc /S.IP sta RXTX.Size+1 eor #$ff sta Counter+1 ldy #S.IP.PROTOCOL lda (ZPBufPtr),y ldy #Sn.cnt-1 .10 cmp Sn.IP.PROTOCOL,y beq .11 dey bne .10 plp lda #MLI.E.IO sec rts .11 lda Sn.IO.BASE,y sta Sn.IO * ora #$30 * sta $426 lda Sn.TX.BASE,y sta Sn.BASE lda Sn.RXTX.MASK,y sta Sn.MASK ldx DEVSLOTx0 ldy #S.IP.DST lda (ZPBufPtr),y beq .12 cmp #$ff bne .13 .12 * >AR.Sn.SELECT S0.DHAR * ldy #6 * lda #$ff *.20 sta W5100.DR,x * dey * bne .20 >AR.Sn.SELECT S0.DIPR * lda #$ff * ldy #3 *.21 sta W5100.DR,x * dey * bpl .21 lda #255 sta W5100.DR,x lda #255 sta W5100.DR,x lda #255 sta W5100.DR,x lda #255 sta W5100.DR,x bra .14 .13 >AR.Sn.SELECT S0.DIPR ldy #S.IP.DST .1 lda (ZPBufPtr),y sta W5100.DR,x iny cpy #S.IP.DST+4 bne .1 .14 >AR.Sn.SELECT S0.TX.FSR lda W5100.DR,x get send size HI ldy W5100.DR,x LO cpy RXTX.Size sbc RXTX.Size+1 bcc .9 >AR.Sn.SELECT S0.TX.WR lda W5100.DR,x Get HI ldy W5100.DR,x Get LO and Sn.MASK ora Sn.BASE sta W5100.AR,x Write HI sta Offset+1 tya sta W5100.AR+1,x Write LO sta Offset ldy #S.IP .2 inc Counter bne .3 inc Counter+1 beq .8 .3 lda (ZPBufPtr),y sta W5100.DR,x iny bne .2 inc ZPBufPtr+1 bra .2 .8 >AR.Sn.SELECT S0.TX.WR lda Offset clc adc RXTX.Size pha save LO lda Offset+1 adc RXTX.Size+1 sta W5100.DR,x write HI pla sta W5100.DR,x write LO >AR.Sn.SELECT S0.CR lda #W5100.AR.Sn.CR.SEND sta W5100.DR,x plp clc rts .9 lda #E.NODATA plp sec rts *-------------------------------------- GET.IOCTLBUFPTR >STYA ZPIOCTL ldy #S.IOCTL.BUFPTR lda (ZPIOCTL),y sta ZPBufPtr iny lda (ZPIOCTL),y sta ZPBufPtr+1 rts *-------------------------------------- DRV.CS.END Sn.cnt .EQ 4 Sn.IP.PROTOCOL .DA #0,#S.IP.PROTOCOL.ICMP,#S.IP.PROTOCOL.TCP,#S.IP.PROTOCOL.UDP Sn.IO.BASE .DA /W5100.AR.S0.MR,/W5100.AR.S1.MR,/W5100.AR.S2.MR,/W5100.AR.S3.MR Sn.TX.BASE .DA /TX.BASE,/TX.BASE+$800,/TX.BASE+$1000,/TX.BASE+$1800 Sn.RX.BASE .DA /RX.BASE,/RX.BASE+$800,/RX.BASE+$1000,/RX.BASE+$1800 Sn.RXTX.MASK .DA /$7FF,/$7FF,/$7FF,/$7FF DEVSLOTx0 .BS 1 *-------------------------------------- DIB .DA #0 .DA #0,#0,#0 size .PS "UtherNetII/W5100" .DA #S.DIB.T.NIC .BS 1 Subtype .DA K.VER Version *-------------------------------------- DCB .DA #S.DCB.T.NIC .DA #S.DCB.NIC.FLAGS.ARPOFFLOAD+S.DCB.NIC.FLAGS.IPOFFLOAD .DA #S.DCB.NIC.LINK.OK+S.DCB.NIC.LINK.FD .DA #S.DCB.NIC.SPEED.100 .HS 0008DC123456 MAC .DA #0,#0,#0,#0 IP .DA #0,#0,#0,#0 MASK .DA #255,#255,#255,#255 GW *-------------------------------------- FRM.HDR .HS 0800 S.ETH.EII.TYPE .HS 4500 FRM.HDR.IPLEN .BS 2 TOTAL LEN .DA 0 ID .DA 0 FLAGS .DA #64 TTL FRM.HDR.PROTO .BS 1 IP.PROTO .DA 0 CHECKSUM FRM.HDR.LEN .EQ *-FRM.HDR *FRM.HDR.SRC .BS 4 IP.SRC * .BS 4 IP.DST *-------------------------------------- DRV.END MAN SAVE usr/src/drv/uther2.ai.drv.s ASM