PR#3
PREFIX /A2OSX.SRC
LOMEM $900
INC 1
AUTO 6
				.LIST OFF
*--------------------------------------
Kernel.Init3	jsr MemMgrInit
				jsr PS0Init
				bcs * 
				
				>LDYAI MSG.Init3
				>SYSCALL CPrintFYA
				
				>LDYAI MSG.IRQ
				>SYSCALL CPrintFYA
				jsr IrqMgrInit
				bcs *

				>LDYAI MSG.DEV
				>SYSCALL CPrintFYA
				jsr DevMgrInit
				bcs *

				>LDYAI MSG.EVT
				>SYSCALL CPrintFYA
				jsr EvtMgrInit
				bcs *

				>LDYAI MSG.FLT
				>SYSCALL CPrintFYA
				jsr FltMgrInit
				bcs *

				>LDYAI MSG.TSK
				>SYSCALL CPrintFYA
				jsr TskMgrInit
				bcs *

				ldy #S.PS.hPREFIX
				lda (pPs),y
				>SYSCALL GetMemPtrA
				 
				>PUSHYA
				>LDYAI MSG.Prefix
				>SYSCALL CPrintFYA

				>PUSHWI STARTUP.CMDLINE
				>LDYAI MSG.Startup
				>SYSCALL CPrintFYA

				>LDYAI STARTUP.CMDLINE
				>SYSCALL ExpandPStrYA
				phx						Save Expanded CMDLINE for discard
				>SYSCALL CreateProcessYA
				bcs .9
				pla
				>SYSCALL FreeMemA		...discard...
				
				>LDYAI MSG.Init3.OK
				>SYSCALL CPrintFYA
				
				>LDYAI TskMgr.Table
				>STYA pPs

				>DEBUGOA

				bit RRAMWRAMBNK2
				bit RRAMWRAMBNK2
				jmp K.KernelRun
				
.9				>PUSHA
				>LDYAI MSG.StartupErr
				>SYSCALL CPrintFYA
				bra *					No need to discard Expanded CMDLINE 
*--------------------------------------
MemMgrInit		>LDYAI MemMgr.MHiMem
				>STYA MemMgr.HiMem
				>STYA MemMgr.Free
				>LDYAI MemMgr.MLoMem
				>STYA MemMgr.LoMem
				stz MemMgr.LastSlot		Reserve Slot #0

				sta SETWRITEAUX
				
				>LDYAI MemMgr.XHiMem
				>STYA MemMgr.HiMem
				>STYA MemMgr.Free
				>LDYAI MemMgr.XLoMem
				>STYA MemMgr.LoMem
				stz MemMgr.LastSlot		Reserve Slot #0
				
				sta CLRWRITEAUX

				rts
*--------------------------------------
PS0Init			ldx #S.DEV*2			NUL,SYS

.1				lda DevMgr.NUL-1,x
				sta DevMgr.Table-1,x
				dex
				bne .1

				lda #2
				sta DevMgr.Count
				
				>LDYAI TskMgr.Table		Select Process 0 (Kernel)
				>STYA pPs

				ldy #S.PS-1
				lda #0
				
.2				sta (pPs),y				Blank PS0
				dey
				bpl .2
				
				>LDYAI DEV.SYS
				>SYSCALL MkNodYA
				bcs .9

				ldy #S.PS.hStdIn
				sta (pPs),y
				ldy #S.PS.hStdOut
				sta (pPs),y
				ldy #S.PS.hStdErr
				sta (pPs),y

				clc
.9				rts
*--------------------------------------
DevMgr.NUL		.DA DevMgr.NUL.Code
				.DA #S.DEV.S.WRITE+S.DEV.S.READ+S.DEV.S.OPENED
				.DA #3
				.AS "NUL"				NAME
				.HS 00					NAME must Be 4 bytes long
*--------------------------------------
DevMgr.SYS		.DA DevMgr.SYS.Code
				.DA #S.DEV.S.WRITE+S.DEV.S.READ
				.DA #3
				.AS "SYS"				NAME
				.HS 00					NAME must Be 4 bytes long
*--------------------------------------
* Setup AuxLC $FFFE->Kernel IRQ Handler
* if irq not handled, jmp (S.IrqMgrOldFFFE)
*--------------------------------------
SETMOUSE		.EQ $12  				Sets mouse mode
SERVEMOUSE		.EQ $13					Services mouse interrupt
READMOUSE		.EQ $14  				Reads mouse position 
INITMOUSE 		.EQ $19					Resets mouse clamps to default values,sets mouse position to 0,0
*--------------------------------------
IrqMgrInit		php
				sei
				>LDYA $FFFE
				>STYA K.IrqMgrOldFFFE
				>LDYAI K.IrqHandlerAuxLC
				>STYA $FFFE

				>LDYAI IrqHandler
				>STYA MLICALL.PARAMS+2
				>MLICALL MLIALLOCIRQ
				bcs .9
				
				lda MLICALL.PARAMS+1
				sta ProDOS.INTNUM
								
				stz ZPPtr1				Try finding a Mouse Card...
				lda #$C1
				sta ZPPtr1+1
				
.1				ldx #DEVSIG.Value-DEVSIG.Offset-1

.2				ldy DEVSIG.Offset,x
				lda (ZPPtr1),y
				cmp DEVSIG.Value,x
				bne .3
				dex
				bpl .2
				bra .4
				
.3				inc ZPPtr1+1			no match, try next slot....
				lda ZPPtr1+1
				cmp #$C8
				bne .1	

				plp
				clc
				rts
				
.9				plp
				sec
				rts
				
.4				lda ZPPtr1+1
				sta GOMOUSE.JMP+2		DEVSLOTCn
				sta K.IrqMgrVBL.MSM+2
				sta K.IrqMgrVBL.MRM+2

				asl
				asl
				asl
				asl
				sta GOMOUSE.n0+1
				sta K.IrqMgrVBL.n0

				ldy #SERVEMOUSE
				lda (ZPPtr1),y
				sta K.IrqMgrVBL.MSM+1

				ldy #READMOUSE
				lda (ZPPtr1),y
				sta K.IrqMgrVBL.MRM+1
				
				bit RROMBNK2			Renable ROM to allow MOUSE II firmware works properly
						
				lda #8
				ldy #SETMOUSE
				jsr GOMOUSE
				bcs *
				
				ldy #INITMOUSE			Reset
				jsr GOMOUSE
				bcs *
				
				bit RRAMWRAMBNK1		Back To LC Ram
				bit RRAMWRAMBNK1
				
				inc K.IrkMgr.VBL		set=1 awaiting IrqMgr confirmation
				
				plp
				clc
				rts
*--------------------------------------
GOMOUSE			pha
				stz ZPPtr1
				ldx GOMOUSE.JMP+2		DEVSLOTCn
				stx ZPPtr1+1
				lda (ZPPtr1),y
				sta GOMOUSE.JMP+1
GOMOUSE.n0		ldy #$ff
				pla
GOMOUSE.JMP		jmp $ffff				Self Modified
*--------------------------------------
DEVSIG.Offset	.HS 05070B0CFB
DEVSIG.Value	.HS 38180120D6
*--------------------------------------
DevMgrInit		stz ZPPtr1
				lda #$C1
				sta ZPPtr1+1
				lda #'1'
				sta SP.DEV+5			S1Dy
				
.1				ldx #SmartPort.SIG-SmartPort.OFS-1

.2				ldy SmartPort.OFS,x		Check if there is a smartport firmware
				lda (ZPPtr1),y
				cmp SmartPort.SIG,x
				bne .3					not a smartport...
				dex
				bpl .2
*SmartPort!!!				
				jsr DevMgrInit.SP
				ldy #A2osX.SLOTS.SP
				bra .7
* Disk II, or Block device ?
.3				dex						if x=0, only first SIG byte failed 
				bpl .8
				
				ldy #$ff
				lda (ZPPtr1),y
				bne .4					$0, Disk II, 16sect
				
				jsr DevMgrInit.DII
				ldy #A2osX.SLOTS.DII
				bra .7
				
.4				inc
				beq .7					$ff, Disk II, 13sect, ignore
				dec
* Block device			
				jsr DevMgrInit.BLK
				ldy #A2osX.SLOTS.BLK
				
.7				lda ZPPtr1+1
				and #$0f
				tax
				tya
				sta A2osX.SLOTS,x
				
.8				inc SP.DEV+5
				inc ZPPtr1+1
				lda ZPPtr1+1				
				cmp #$C8
				bne .1
				
				clc
				rts
*--------------------------------------
DevMgrInit.SP	ldy #$ff
				lda (ZPPtr1),y
				clc
				adc #3					Compute smartport entry point
				sta .1+1
				sta .3+1
				sta SP.DEV+S.DEV.JMP
				lda ZPPtr1+1
				sta .1+2
				sta .3+2
				sta SP.DEV+S.DEV.JMP+1
				
.1				jsr $ffff				Self Modified
				.DA #0					Status
				.DA SP.CTRL.STATUS
				bcs .9
				lda SP.STATUS1
				beq .9					no device
				
.2				lda #1
				sta SP.DEV.STATUS+1
				lda #'1'
				sta SP.DEV+7			SxD1
				
.3				jsr $ffff				Self Modified
				.DA #0					Status
				.DA SP.DEV.STATUS
				bcs .7
				lda SP.STATUS2+S.DEVSTAT.S
				sta SP.DEV+S.DEV.S
				
				
				
				
				
				
.7				inc SP.DEV+7
				dec SP.STATUS1
				bne .3

.9				rts
*--------------------------------------
DevMgrInit.DII
				rts
*--------------------------------------
DevMgrInit.BLK
				rts
*--------------------------------------
DevMgrInit.AddDev
				lda DevMgr.Count
				inc DevMgr.Count
				jsr K.GetDevByIDA
				>STYA ZPPtr1
				rts
*--------------------------------------
SmartPort.OFS	.HS 07010305
SmartPort.SIG	.HS 00200003
*--------------------------------------
SP.CTRL.STATUS	.DA #3
				.DA #0
				.DA SP.STATUS1
				.DA #0					return S only
SP.DEV.STATUS	.DA #3
				.BS 1
				.DA SP.STATUS2
				.DA #3					return DIB
SP.STATUS1		.BS 4
SP.STATUS2		.BS S.DEVSTAT
*--------------------------------------
SP.DEV			.BS 2					JMP
				.BS 1					S
				>PSTR "S1D1"			5 bytes
*--------------------------------------
SP.DRV			cld
				ldy #7 
				lda (pDev),y
				and #$f
				sta PRTCALL.PARAMS+1	dev
SP.DRV.lo		ldy #$ff
SP.DRV.hi		lda #$ff
				jmp A2osX.PRTCALL
*--------------------------------------
BLK.DRV			
*--------------------------------------
EvtMgrInit	
*				lda #10
*				sta EVTMGR.10TH.CNT		WARNING!!!! WRONG BANK!!!

*				lda A2osX.HZ
*				sta EVTMGR.HZ.CNT
				
				lda MACHID
				and #MACHID.TYPE
				cmp #MACHID.TYPE.IIc
				bne .8
				
*				sta CLRIOUDIS
*				sta ENBVBLIIC
				
.8				lda /EvtMgr.Table
				sta pEvent+1
				clc
				rts
*--------------------------------------
FltMgrInit		stz FltMgr.Table
				clc
				rts
*--------------------------------------
TskMgrInit		>LDYAI TskMgr.Table+S.PS	Clear whole process table except PS0
				>STYA .2+1
				
				ldx #K.PS.MAX-1
				
.1				lda #0	
				ldy #S.PS-1
				
.2				sta $ffff,y				Self Modified
				dey
				bpl .2
				
				lda .2+1
				clc
				adc #S.PS
				sta .2+1
				bcc .3
				
				inc .2+2
.3				dex
				bne .1

				>PUSHWI K.ENV.SIZE		get a buffer for ENV
				>PUSHBI S.MEM.F.INIT0	make sure blank
				>SYSCALL GetMem			create it...
				bcs .9
				
				txa
				ldy #S.PS.hENV
				sta (pPs),y

				>LDYAI UsrBuf256
				>STYA MLICALL.PARAMS+1
				>MLICALL MLIGETPREFIX
				bcs .9
				
				>LDYAI UsrBuf256	
				>SYSCALL NewPStrYA
				bcs .9
				
				txa
				ldy #S.PS.hPREFIX
				sta (pPs),y

				>PUSHWI UsrBuf256		push ENV value
				>PUSHWI I.ENV.A2osX		push ENV name
				>SYSCALL SetEnv
				bcs .9

				>LDYAI I.ENV.PATH
				>SYSCALL PutEnvYA
				bcs .9

				>LDYAI I.ENV.LIB
				>SYSCALL PutEnvYA
				bcs .9

				>LDYAI I.ENV.DRV
				>SYSCALL PutEnvYA
.9				rts
*--------------------------------------
DEV.SYS			>PSTR "SYS"
I.ENV.A2osX		>PSTR "A2OSX"
I.ENV.PATH		>PSTR "PATH=${A2OSX}SBIN/;${A2OSX}BIN/"
I.ENV.LIB		>PSTR "LIB=${A2OSX}LIB/"
I.ENV.DRV		>PSTR "DRV=${A2OSX}DRV/"
STARTUP.CMDLINE	>PSTR "${A2OSX}SBIN/SHELL ${A2OSX}A2osX.STARTUP"
*--------------------------------------
MSG.Init3		>CSTR "A2osX[Stage3]:Init\n"
MSG.IRQ			>CSTR "-Interrupt Manager...\n"
MSG.DEV			>CSTR "-Device Manager...\n"
MSG.EVT			>CSTR "-Event Manager...\n"
MSG.FLT			>CSTR "-Path Filter...\n"
MSG.TSK			>CSTR "-Task Manager...\n"
MSG.Prefix		>CSTR "Prefix:%S\n"
MSG.Startup		>CSTR "Executing Kernel Startup Script...\nCmd:%S\n"
MSG.StartupErr	>CSTR "Failed : [$%h]\n"
MSG.Init3.OK	>CSTR "A2osX[Stage3]:Complete.\n"
*--------------------------------------
MAN
SAVE SYS/KERNEL.S.INIT3
LOAD SYS/KERNEL.S
ASM