NEW 
  AUTO 3,1
				.LIST OFF	
				.OP	65C02
				.OR	$2000
				.TF LIB/LIBPAK
*--------------------------------------
				.INB INC/MACROS.I
				.INB INC/A2OSX.I
				.INB INC/LIBPAK.I
*--------------------------------------
ZPSrcPtr		.EQ ZPLIB
ZPSrcWPtr		.EQ ZPLIB+2
ZPCnt			.EQ ZPLIB+4
ZPHdrPtr		.EQ ZPLIB+14
ZPDstPtr		.EQ ZPLIB+16
ZPStatPtr		.EQ ZPLIB+18
*--------------------------------------
*			File Header (16 Bytes)
*--------------------------------------
CS.START		cld
				jmp (.1,x)
				.DA #$61				6502,Level 1 (65c02)
				.DA #1					BIN Layout Version 1
				.DA 0
				.DA CS.END-CS.START
				.DA 0
				.DA 0
				.DA 0
*--------------------------------------
* Relocation Table
*--------------------------------------
.1				.DA LIB.LOAD
				.DA LIB.UNLOAD
				.DA Pak
				.DA 0
*--------------------------------------
LIB.LOAD
LIB.UNLOAD		clc
				rts
*/--------------------------------------
* # Pak
* **In:**
* ##ASM 
* PUSHW = S.PAKSTAT Ptr
* PUSHW = Output Buffer Ptr
* PUSHW = Input Buffer Len
* PUSHW = Input Buffer Ptr 
*\--------------------------------------
Pak				>PULLW Pak.SrcPtr
				>PULLW Pak.SrcLen
				>PULLW ZPDstPtr
				>PULLW ZPStatPtr

* Reset Byte counters

				ldx #0

.1				stz	Pak.CntL,x
				stz Pak.CntH,x
				inx
				bne .1
				
* PASS #1 : REP & BL, no store, update byte counters

				stz Pak.bPass2
								
				jsr Pak.InitPass

				jsr Pak.Run
				bcs .9
				
				jsr Pak.BuildShortTable
				
* PASS #2 : REP & BL, store with S3,S4

				dec Pak.bPass2
				
				jsr Pak.InitPass

				jsr Pak.Out.Init		Initialize properly for first "PutBit" Call

				stz Pak.StoreCnt
				
				jsr Pak.Run
				bcs .9
				
				ldy #S.PAKSHNK-1
				
.2				lda Pak.Shnk,y
				sta (ZPHdrPtr),y
				dey
				bpl .2
				
				ldy #S.PAKSTAT-1
				
.3				lda Pak.Stat,y
				sta (ZPStatPtr),y
				dey
				bpl .3
				
				clc
				rts

.9				lda #E.OOM
				sec
				rts		
*--------------------------------------
Pak.InitPass	>LDYA Pak.SrcPtr
				>STYA ZPSrcPtr
				>STYA Pak.WPtr
				
				lda Pak.SrcLen
				eor #$ff
				sta Pak.SrcCnt
				
				lda Pak.SrcLen+1
				eor #$ff
				sta Pak.SrcCnt+1

				lda #$ff				RepChar invalid
				sta Pak.RepCnt
				
				ldx #S.PAKSTAT.PASS2
				
.1				stz Pak.Stat,x			Reset Stats
				inx
				cpx #S.PAKSTAT
				bne .1
				
				rts
*--------------------------------------
Pak.Run			lda #$ff
				cmp Pak.SrcCnt+1		return 255 if not $ffxx
				bne .1
				
				lda Pak.SrcCnt
				eor #$ff				return !xx if $ffxx
				beq .8					0 byte left...
				
.1				cmp #4					less than 4 chars, give up BL						
				bcc .4
				
				sta Pak.MaxReadAhead
				stz Pak.BestBLLen
				
				ldx #3
				
.2				inx
				jsr Pak.ScanBL
				bcs .3
				>STYA Pak.BestBL
				stx Pak.BestBLLen
				
				cpx Pak.MaxReadAhead
				bne .2
				
.3				lda Pak.BestBLLen
				beq .4					NO BL found....
				
				lda Pak.BestBL+1
				ora #PAK.B.BACKLINK     %1110 + Ofs.HI
				jsr Pak.PutA
				bcs .9
				
				lda Pak.BestBL			get Ofs.LO
				jsr Pak.PutA
				bcs .9
				
				lda Pak.BestBLLen		get back len
				jsr Pak.PutA
				bcs .9
				
				lda Pak.BestBLLen
				jsr Pak.SrcForward
				
				ldx #S.PAKSTAT.BL
				jsr Pak.UpdateStats
				
				bra Pak.Run

.4				lda (ZPSrcPtr)

				jsr Pak.PutA
				bcs .9
				
				lda #1
				jsr Pak.SrcForward
				
				bra Pak.Run
				
.8				lda Pak.RepCnt			do we have a pending REP ?
				beq .80
				
				ora #PAK.B.REPn			yes, add it
				jmp  Pak.PutA.1
				
.80				clc				
.9				rts
*--------------------------------------
Pak.SrcForward	pha						Len

				clc
				adc ZPSrcPtr
				sta ZPSrcPtr
				bcc .1
				clc
				inc ZPSrcPtr+1
				
.1				pla
				adc Pak.SrcCnt
				sta Pak.SrcCnt
				bcc .2
				inc Pak.SrcCnt+1
				
.2				sec
				lda ZPSrcPtr
				sbc #WSIZE
				tay
				lda ZPSrcPtr+1
				sbc /WSIZE
				tax
				
				cpy Pak.WPtr
				sbc Pak.WPtr+1
				bcc .8

				sty Pak.WPtr
				stx Pak.WPtr+1
.8				rts
*--------------------------------------
* Scan between Pak.WPtr & ZPSrcPtr-A
* Byte string at ZPSrcPtr (len A)
* IN : X = Byte string length
* OUT : CC: Y,A=offset to BL
*--------------------------------------
Pak.ScanBL		stx Pak.WStrLen

				sec
				lda ZPSrcPtr			WLimit=ZPSrcPtr-WStrLen
				sbc Pak.WStrLen
				sta Pak.WLimit
				
				lda ZPSrcPtr+1
				sbc #0
				sta Pak.WLimit+1
				
				lda Pak.WLimit
				sec
				sbc Pak.WPtr
				eor #$ff
				sta Pak.Cnt

				lda Pak.WLimit+1
				sbc Pak.WPtr+1
				eor #$ff
				sta Pak.Cnt+1
				
				bcc .9					WLimit < Pak.WPtr
				
				lda Pak.WPtr
				sta ZPSrcWPtr
				
				lda Pak.WPtr+1
				sta ZPSrcWPtr+1

				ldy #0

.1				lda (ZPSrcWPtr),y		
				cmp (ZPSrcPtr),y
				bne .6
				iny
				cpy Pak.WStrLen
				bne .1
				sec
				lda ZPSrcPtr
				sbc ZPSrcWPtr
				tay
				lda ZPSrcPtr+1
				sbc ZPSrcWPtr+1
				
				clc
				rts
				
.6				inc ZPSrcWPtr
				bne .7
				inc ZPSrcWPtr+1
				
.7				inc Pak.Cnt				
				bne .1
				inc Pak.Cnt+1
				bne .1

.9				sec
				rts
*--------------------------------------
Pak.BuildShortTable
				ldy #0

.6				stz Pak.Cnt				Init best score to 0
				stz Pak.Cnt+1
				
				ldx #0
				
.7				lda Pak.Cnt
				cmp Pak.CntL,x			is it better at X
				lda Pak.Cnt+1
				sbc Pak.CntH,x
				bcs .8					not better or equal...
				
				stx Pak.In.Byte			save new score index...
				
				lda Pak.CntL,x
				sta Pak.Cnt				...and value
				lda Pak.CntH,x
				sta Pak.Cnt+1
				
.8				inx
				bne .7
				
				lda Pak.In.Byte
				sta Pak.Shnk+S.PAKSHNK.SHORT3,y
				tax
				stz Pak.CntL,x			Discard this entry
				stz Pak.CntH,x
				iny
				cpy #24
				bne .6

				rts
*--------------------------------------
Pak.PutA		bit Pak.RepCnt
				bpl .1

				stz Pak.RepCnt			LastByte invalid...		
				sta Pak.LastByte
				bra Pak.PutA.1			send first byte.
				
.1				cmp Pak.LastByte
				beq .3
				
				sta Pak.LastByte		save new byte
				lda Pak.RepCnt			do we have a pending REP ?
				beq .2
				
				ora #PAK.B.REPn			yes, send it
				jsr  Pak.PutA.1
				bcs .9

				ldx #S.PAKSTAT.REP
				jsr Pak.UpdateStats
				stz Pak.RepCnt
				
.2				lda Pak.LastByte
				bra Pak.PutA.1
				
.3				inc Pak.RepCnt
				lda Pak.RepCnt
				cmp #REPMAX
				bne .8

				dec
				ora #PAK.B.REPn
				jsr Pak.PutA.1
				bcs .9
				
				lda #1
				sta Pak.RepCnt
				
				ldx #S.PAKSTAT.REP
				jsr Pak.UpdateStats
				
.8				clc
.9				rts
									
Pak.PutA.1		bit Pak.bPass2
				bmi .10
				
				tax
				inc Pak.CntL,x
				bne .11
				inc Pak.CntH,x
				
.11				inc Pak.Stat+S.PAKSTAT.PASS1
				bne .12
				inc Pak.Stat+S.PAKSTAT.PASS1+1
.12				clc
				rts
				
* Pak.PutA.1  PASS #2
				
.10				ldy #7

.1				cmp Pak.Shnk+S.PAKSHNK.SHORT3,y
				beq .3
				dey
				bpl .1
				
				ldy #15

.2				cmp Pak.Shnk+S.PAKSHNK.SHORT4,y
				beq .4
				dey
				bpl .2
				
				bra .7

.3				tya
				asl
				asl
				asl
				asl
				ora #PAK.B.SHORT3
				ldy #4
				ldx #S.PAKSTAT.S3
				bra .8
				
.4				tya
				asl
				asl
				ora #PAK.B.SHORT4
				ldy #6
				ldx #S.PAKSTAT.S4
				bra .8
				
.7				ldx Pak.StoreCnt
				sta Pak.StoreBuf,x
				inx
				cpx #STOREMAX
				beq Pak.Flush
				stx Pak.StoreCnt
				clc
				rts
				
.8				jsr Pak.UpdateStats
				jmp Pak.Out.PutYBits
*--------------------------------------
Pak.Flush		ldx Pak.StoreCnt 
				beq .8
				
				lda #PAK.B.STOREn
				ldy #4
				jsr Pak.Out.PutYBits
				bcs .9
				
				ldx #0
				
.1				lda Pak.StoreBuf,x
				sta Pak.LastByte		update last byte for REP
				ldy #8
				jsr Pak.Out.PutYBits
				bcs .9
				
				inc Pak.Stat+S.PAKSTAT.STORE
				bne .2
				inc Pak.Stat+S.PAKSTAT.STORE+1
				
.2				inx
				dec Pak.StoreCnt
				bne .1

				stz Pak.RepCnt			Don't forget to set last byte valid
				
.8				clc				
.9				rts
*--------------------------------------
Pak.UpdateStats	inc Pak.Stat,x
				bne .8
				inc Pak.Stat+1,x
.8				rts
*--------------------------------------
*				.INB USR/SRC/LIB/LIBPAK.S.IN
				.INB USR/SRC/LIB/LIBPAK.S.OUT
*--------------------------------------
CS.END
Pak.SrcPtr		.BS 2
Pak.SrcLen		.BS 2

Pak.SrcCnt		.BS 2
Pak.DstCnt		.BS 2

Pak.RepCnt		.BS 1
Pak.LastByte	.BS 1

Pak.StoreCnt	.BS 1
Pak.StoreBuf	.BS STOREMAX


Pak.Cnt			.BS 2

Pak.bPass2		.BS 1
Pak.MaxReadAhead	.BS 1

Pak.BestBLLen	.BS 1
Pak.BestBL		.BS 2
Pak.WPtr		.BS 2
Pak.WLimit		.BS 2
Pak.WStrLen		.BS 1

Pak.In.Byte		.BS 1
Pak.In.Mask		.BS 1

Pak.Out.Byte	.BS 1
Pak.Out.Mask	.BS 1
*--------------------------------------
Pak.CntL		.BS 256
Pak.CntH		.BS 256
Pak.Shnk		.BS S.PAKSHNK
Pak.Stat		.BS S.PAKSTAT
*--------------------------------------
Pak.In.BitMask	.HS 8040201008040201
MAN
SAVE USR/SRC/LIB/LIBPAK.S
ASM