\ To test the ANS Forth Block word set and extension words \ This program was written by Steve Palmer in 2015, with contributions from \ others where indicated, and is in the public domain - it can be distributed \ and/or modified in any way but please retain this notice. \ This program is distributed in the hope that it will be useful, \ but WITHOUT ANY WARRANTY; without even the implied warranty of \ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. \ The tests are not claimed to be comprehensive or correct \ ------------------------------------------------------------------------------ \ Version 0.1 23 October 2015 First Version \ Version 0.2 15 November 2015 Updated after feedback from Gerry Jackson \ ------------------------------------------------------------------------------ \ The tests are based on John Hayes test program for the core word set \ \ Words tested in this file are: \ BLK BLOCK BUFFER EVALUATE FLUSH LOAD SAVE-BUFFERS UPDATE \ EMPTY-BUFFERS LIST SCR THRU REFILL SAVE-INPUT RESTORE-INPUT \ \ \ ------------------------------------------------------------------------------ \ Assumptions and dependencies: \ - tester.fr or ttester.fs has been loaded prior to this file \ - errorreport.fth has been loaded prior to this file \ - utilities.fth has been loaded prioir to this file \ ------------------------------------------------------------------------------ TESTING Block word set DECIMAL \ Define these constants from the system documentation provided. \ WARNING: The contents of the test blocks will be destroyed by this test. \ The blocks tested will be in the range \ FIRST-TEST-BLOCK <= u < LIMIT-TEST-BLOCK \ The tests need at least 2 test blocks in the range to complete. 20 CONSTANT FIRST-TEST-BLOCK 30 CONSTANT LIMIT-TEST-BLOCK \ one beyond the last FIRST-TEST-BLOCK LIMIT-TEST-BLOCK U< 0= [?IF] \? .( Error: Test Block range not identified ) CR ABORT [?THEN] LIMIT-TEST-BLOCK FIRST-TEST-BLOCK - CONSTANT TEST-BLOCK-COUNT TEST-BLOCK-COUNT 2 U< [?IF] \? .( Error: At least 2 Test Blocks are required to run the tests ) CR ABORT [?THEN] \ ------------------------------------------------------------------------------ TESTING Random Number Utilities \ The block tests make extensive use of random numbers to select blocks to test \ and to set the contents of the block. It also makes use of a Hash code to \ ensure the integrity of the blocks against unexpected changes. \ == Memory Walk tools == : @++ ( a-addr -- a-addr+4 a-addr@ ) DUP CELL+ SWAP @ ; : !++ ( x a-addr -- a-addr+4 ) TUCK ! CELL+ ; : C@++ ( c-addr -- c-addr;char+ c-addr@ ) DUP CHAR+ SWAP C@ ; : C!++ ( char c-addr -- c-addr+1 ) TUCK ! CHAR+ ; \ == Random Numbers == \ Based on "Xorshift" PRNG wikipedia page \ reporting on results by George Marsaglia \ https://en.wikipedia.org/wiki/Xorshift \ Note: THIS IS NOT CRYPTOGRAPHIC QUALITY : PRNG CREATE ( "name" -- ) 4 CELLS ALLOT DOES> ( -- prng ) ; : PRNG-ERROR-CODE ( prng -- errcode | 0 ) 0 4 0 DO \ prng acc >R @++ R> OR \ prng acc' LOOP \ prng xORyORzORw NIP 0= ; \ xORyORzORw=0 : PRNG-COPY ( src-prng dst-prng -- ) 4 CELLS MOVE ; : PRNG-SET-SEED ( prng w z y x -- ) 4 PICK \ prng w z y x prng 4 0 DO !++ LOOP DROP \ prng DUP PRNG-ERROR-CODE IF \ prng 1 OVER +! \ prng THEN \ prng DROP ; \ BITS/CELL 64 = [?IF] \? : PRNG-RND ( prng -- rnd ) \? DUP @ \? DUP 21 LSHIFT XOR \? DUP 35 RSHIFT XOR \? DUP 4 LSHIFT XOR \? TUCK SWAP ! ; [?THEN] BITS/CELL 32 = [?IF] \? : PRNG-RND ( prng -- rnd ) \? DUP @ \ prng x \? DUP 11 LSHIFT XOR \ prng t=x^(x<<11) \? DUP 8 RSHIFT XOR \ prng t'=t^(t>>8) \? OVER DUP CELL+ SWAP 3 CELLS MOVE \ prng t' \? OVER 3 CELLS + @ \ prng t' w \? DUP 19 RSHIFT XOR \ prng t' w'=w^(w>>19) \? XOR \ prng rnd=w'^t' \? TUCK SWAP 3 CELLS + ! ; \ rnd [?THEN] BITS/CELL 16 = [?IF] \? .( === NOT TESTED === ) \? \ From http://b2d-f9r.blogspot.co.uk/2010/08/16-bit-xorshift-rng-now-with-more.html \? : PRNG-RND ( prng -- rnd ) \? DUP @ \ prng x \? DUP 5 LSHIFT XOR \ prng t=x^(x<<5) \? DUP 3 RSHIFT XOR \ prng t'=t^(t>>3) \? OVER DUP CELL+ @ TUCK SWAP ! \ prng t' y \? DUP 1 RSHIFT XOR \ prng t' y'=y^(y>>1) \? XOR \ prng rnd=y'^t' \? TUCK SWAP CELL+ ! ; \ rnd [?THEN] [?DEF] PRNG-RND \? .( You need to add a Psuedo Random Number Generator for your cell size: ) \? BITS/CELL U. CR \? ABORT [?THEN] : PRNG-RANDOM ( lower upper prng -- rnd ) >R OVER - R> PRNG-RND UM* NIP + ; \ PostCondition: T{ lower upper 2DUP 2>R prng PRNG-RANDOM 2R> WITHIN -> TRUE }T PRNG BLOCK-PRNG \ Generated by Random.org BLOCK-PRNG -1865266521 188896058 -2021545234 -1456609962 PRNG-SET-SEED : BLOCK-RND ( -- rnd ) BLOCK-PRNG PRNG-RND ; : BLOCK-RANDOM ( lower upper -- rnd ) BLOCK-PRNG PRNG-RANDOM ; : RND-TEST-BLOCK ( -- blk ) FIRST-TEST-BLOCK LIMIT-TEST-BLOCK BLOCK-RANDOM ; \ PostCondition: T{ RND-TEST-BLOCK FIRST-TEST-BLOCK LIMIT-TEST-BLOCK WITHIN -> TRUE }T \ Two distinct random test blocks : 2RND-TEST-BLOCKS ( -- blk1 blk2 ) RND-TEST-BLOCK BEGIN \ blk1 RND-TEST-BLOCK \ blk1 blk2 2DUP = \ blk1 blk2 blk1==blk2 WHILE \ blk1 blk1 DROP \ blk1 REPEAT ; \ blk1 blk2 \ PostCondition: T{ 2RND-TEST-BLOCKS = -> FALSE }T \ first random test block in a sequence of length u : RND-TEST-BLOCK-SEQ ( u -- blks ) FIRST-TEST-BLOCK LIMIT-TEST-BLOCK ROT 1- - BLOCK-RANDOM ; \ I'm not sure if this algorithm is correct if " 1 CHARS 1 <> ". : ELF-HASH-ACCUMULATE ( hash c-addr u -- hash ) >R SWAP R> 0 DO \ c-addr h 4 LSHIFT \ c-addr h<<=4 SWAP C@++ ROT + \ c-addr' h+=*s DUP [ HEX ] F0000000 [ DECIMAL ] AND \ c-addr' h high=h&0xF0000000 DUP IF \ c-addr' h high DUP >R 24 RSHIFT XOR R> \ c-addr' h^=high>>24 high THEN \ c-addr' h high INVERT AND \ c-addr' h&=~high LOOP NIP ; : ELF-HASH ( c-addr u -- hash ) 0 ROT ROT ELF-HASH-ACCUMULATE ; \ ------------------------------------------------------------------------------ TESTING BLOCK ( read-only mode ) \ BLOCK signature T{ RND-TEST-BLOCK BLOCK DUP ALIGNED = -> TRUE }T \ BLOCK accepts all blocks in the test range : BLOCK-ALL ( blk2 blk1 -- ) DO I BLOCK DROP LOOP ; T{ LIMIT-TEST-BLOCK FIRST-TEST-BLOCK BLOCK-ALL -> }T \ BLOCK twice on same block returns the same value T{ RND-TEST-BLOCK DUP BLOCK SWAP BLOCK = -> TRUE }T \ BLOCK twice on distinct block numbers \ may or may not return the same value! \ Nothing to test \ ------------------------------------------------------------------------------ TESTING BUFFER ( read-only mode ) \ Although it is not in the spirit of the specification, \ a compliant definition of BUFFER would be \ : BUFFER BLOCK ; \ So we can only repeat the tests for BLOCK ... \ BUFFER signature T{ RND-TEST-BLOCK BUFFER DUP ALIGNED = -> TRUE }T \ BUFFER accepts all blocks in the test range : BUFFER-ALL ( blk2 blk1 -- ) DO I BUFFER DROP LOOP ; T{ LIMIT-TEST-BLOCK FIRST-TEST-BLOCK BUFFER-ALL -> }T \ BUFFER twice on the same block returns the same value T{ RND-TEST-BLOCK DUP BUFFER SWAP BUFFER = -> TRUE }T \ BUFFER twice on distinct block numbers \ may or may not return the same value! \ Nothing to test \ Combinations with BUFFER T{ RND-TEST-BLOCK DUP BLOCK SWAP BUFFER = -> TRUE }T T{ RND-TEST-BLOCK DUP BUFFER SWAP BLOCK = -> TRUE }T \ ------------------------------------------------------------------------------ TESTING Read and Write access with UPDATE and FLUSH \ Ideally, we'd like to be able to test the persistence across power cycles \ of the writes, but we can't do that in a simple test. \ The tests below could be fooled by a large buffers store and a tricky FLUSH \ but what else are you going to do? \ Signatures T{ RND-TEST-BLOCK BLOCK DROP UPDATE -> }T T{ FLUSH -> }T : BLANK-BUFFER ( blk -- blk-addr ) BUFFER DUP 1024 BL FILL ; \ Test R/W of a Simple Blank Random Block T{ RND-TEST-BLOCK \ blk DUP BLANK-BUFFER \ blk blk-addr1 1024 ELF-HASH \ blk hash UPDATE FLUSH \ blk hash SWAP BLOCK \ hash blk-addr2 1024 ELF-HASH = -> TRUE }T \ Boundary Test: Modify first character T{ RND-TEST-BLOCK \ blk DUP BLANK-BUFFER \ blk blk-addr1 CHAR \ OVER C! \ blk blk-addr1 1024 ELF-HASH \ blk hash UPDATE FLUSH \ blk hash SWAP BLOCK \ hash blk-addr2 1024 ELF-HASH = -> TRUE }T \ Boundary Test: Modify last character T{ RND-TEST-BLOCK \ blk DUP BLANK-BUFFER \ blk blk-addr1 CHAR \ OVER 1023 CHARS + C! \ blk blk-addr1 1024 ELF-HASH \ blk hash UPDATE FLUSH \ blk hash SWAP BLOCK \ hash blk-addr2 1024 ELF-HASH = -> TRUE }T \ Boundary Test: First and Last (and all other) blocks in the test range 1024 8 * BITS/CELL / CONSTANT CELLS/BLOCK : PREPARE-RND-BLOCK ( hash blk -- hash' ) BUFFER DUP \ hash blk-addr blk-addr CELLS/BLOCK 0 DO \ hash blk-addr blk-addr[i] BLOCK-RND OVER ! CELL+ \ hash blk-addr blk-addr[i+1] LOOP DROP \ hash blk-addr 1024 ELF-HASH-ACCUMULATE ; \ hash' : WRITE-RND-BLOCKS-WITH-HASH ( blk2 blk1 -- hash ) 0 ROT ROT DO \ hash I PREPARE-RND-BLOCK UPDATE \ hash' LOOP ; \ hash' : READ-BLOCKS-AND-HASH ( blk2 blk1 -- hash ) 0 ROT ROT DO \ hash(i) I BLOCK 1024 ELF-HASH-ACCUMULATE \ hash(i+1) LOOP ; \ hash T{ LIMIT-TEST-BLOCK FIRST-TEST-BLOCK WRITE-RND-BLOCKS-WITH-HASH FLUSH LIMIT-TEST-BLOCK FIRST-TEST-BLOCK READ-BLOCKS-AND-HASH = -> TRUE }T : TUF1 ( xt blk -- hash ) DUP BLANK-BUFFER \ xt blk blk-addr1 1024 ELF-HASH \ xt blk hash ROT EXECUTE \ blk hash SWAP BLOCK \ hash blk-addr2 1024 ELF-HASH = ; \ TRUE \ Double UPDATE make no difference : TUF1-1 ( -- ) UPDATE UPDATE FLUSH ; T{ ' TUF1-1 RND-TEST-BLOCK TUF1 -> TRUE }T \ Double FLUSH make no difference : TUF1-2 ( -- ) UPDATE FLUSH FLUSH ; T{ ' TUF1-2 RND-TEST-BLOCK TUF1 -> TRUE }T \ FLUSH only saves UPDATEd buffers T{ RND-TEST-BLOCK \ blk 0 OVER PREPARE-RND-BLOCK \ blk hash UPDATE FLUSH \ blk hash OVER 0 SWAP PREPARE-RND-BLOCK DROP \ blk hash FLUSH ( with no preliminary UPDATE) \ blk hash SWAP BLOCK 1024 ELF-HASH = -> TRUE }T \ UPDATE only marks the current block buffer \ This test needs at least 2 distinct buffers, though this is not a \ requirement of the language specification. If 2 distinct buffers \ are not returned, then the tests quits with a trivial Pass : TUF2 ( xt blk1 blk2 -- hash1'' hash2'' hash1' hash2' hash1 hash2 ) OVER BUFFER OVER BUFFER = IF \ test needs 2 distinct buffers 2DROP DROP 0 0 0 0 0 0 \ Dummy result ELSE OVER 0 SWAP PREPARE-RND-BLOCK UPDATE \ xt blk1 blk2 hash1 OVER 0 SWAP PREPARE-RND-BLOCK UPDATE \ xt blk1 blk2 hash1 hash2 2>R \ xt blk1 blk2 FLUSH \ xt blk1 blk2 OVER 0 SWAP PREPARE-RND-BLOCK \ xt blk1 blk2 hash1' OVER 0 SWAP PREPARE-RND-BLOCK \ xt blk1 blk2 hash1' hash2' 2>R \ xt blk1 blk2 ROT EXECUTE \ blk1 blk2 FLUSH \ blk1 blk2 SWAP BLOCK 1024 ELF-HASH \ blk2 hash1'' SWAP BLOCK 1024 ELF-HASH \ hash1'' hash2'' 2R> 2R> \ hash1'' hash2'' hash1' hash2' hash1 hash2 THEN ; : 2= ( x1 x2 x3 x4 -- flag ) ROT = ROT ROT = AND ; : TUF2-0 ( blk1 blk2 -- blk1 blk2 ) ; \ no updates T{ ' TUF2-0 2RND-TEST-BLOCKS TUF2 \ run test procedure 2SWAP 2DROP 2= -> TRUE }T \ compare expected and actual : TUF2-1 ( blk1 blk2 -- blk1 blk2 ) \ update blk1 only OVER BLOCK DROP UPDATE ; T{ ' TUF2-1 2RND-TEST-BLOCKS TUF2 \ run test procedure SWAP DROP SWAP DROP 2= -> TRUE }T : TUF2-2 ( blk1 blk2 -- blk1 blk2 ) \ update blk2 only DUP BUFFER DROP UPDATE ; T{ ' TUF2-2 2RND-TEST-BLOCKS TUF2 \ run test procedure DROP ROT DROP SWAP 2= -> TRUE }T : TUF2-3 ( blk1 blk2 -- blk1 blk2 ) \ update blk1 and blk2 TUF2-1 TUF2-2 ; T{ ' TUF2-3 2RND-TEST-BLOCKS TUF2 \ run test procedure 2DROP 2= -> TRUE }T \ FLUSH and then UPDATE is ambiguous and untestable \ ------------------------------------------------------------------------------ TESTING SAVE-BUFFERS \ In principle, all the tests above can be repeated with SAVE-BUFFERS instead of \ FLUSH. However, only the full random test is repeated... T{ LIMIT-TEST-BLOCK FIRST-TEST-BLOCK WRITE-RND-BLOCKS-WITH-HASH SAVE-BUFFERS LIMIT-TEST-BLOCK FIRST-TEST-BLOCK READ-BLOCKS-AND-HASH = -> TRUE }T \ FLUSH and then SAVE-BUFFERS is harmless but undetectable \ SAVE-BUFFERS and then FLUSH is undetectable \ Unlike FLUSH, SAVE-BUFFERS then BUFFER/BLOCK \ returns the original buffer address T{ RND-TEST-BLOCK DUP BLANK-BUFFER SAVE-BUFFERS SWAP BUFFER = -> TRUE }T T{ RND-TEST-BLOCK DUP BLANK-BUFFER UPDATE SAVE-BUFFERS SWAP BUFFER = -> TRUE }T T{ RND-TEST-BLOCK DUP BLANK-BUFFER SAVE-BUFFERS SWAP BLOCK = -> TRUE }T T{ RND-TEST-BLOCK DUP BLANK-BUFFER UPDATE SAVE-BUFFERS SWAP BLOCK = -> TRUE }T \ ------------------------------------------------------------------------------ TESTING BLK \ Signature T{ BLK DUP ALIGNED = -> TRUE }T \ None of the words considered so far effect BLK T{ BLK @ RND-TEST-BLOCK BUFFER DROP BLK @ = -> TRUE }T T{ BLK @ RND-TEST-BLOCK BLOCK DROP BLK @ = -> TRUE }T T{ BLK @ UPDATE BLK @ = -> TRUE }T T{ BLK @ FLUSH BLK @ = -> TRUE }T T{ BLK @ SAVE-BUFFERS BLK @ = -> TRUE }T \ ------------------------------------------------------------------------------ TESTING LOAD and EVALUATE \ Signature: n LOAD --> blank screen T{ RND-TEST-BLOCK DUP BLANK-BUFFER DROP UPDATE FLUSH LOAD -> }T T{ BLK @ RND-TEST-BLOCK DUP BLANK-BUFFER DROP UPDATE FLUSH LOAD BLK @ = -> TRUE }T : WRITE-BLOCK ( blk c-addr u -- ) ROT BLANK-BUFFER SWAP CHARS MOVE UPDATE FLUSH ; \ blk: u; blk LOAD : TL1 ( u blk -- ) SWAP 0 <# #S #> WRITE-BLOCK ; T{ BLOCK-RND RND-TEST-BLOCK 2DUP TL1 LOAD = -> TRUE }T \ Boundary Test: FIRST-TEST-BLOCK T{ BLOCK-RND FIRST-TEST-BLOCK 2DUP TL1 LOAD = -> TRUE }T \ Boundary Test: LIMIT-TEST-BLOCK-1 T{ BLOCK-RND LIMIT-TEST-BLOCK 1- 2DUP TL1 LOAD = -> TRUE }T : WRITE-AT-END-OF-BLOCK ( blk c-addr u -- ) ROT BLANK-BUFFER OVER 1024 SWAP - CHARS + SWAP CHARS MOVE UPDATE FLUSH ; \ Boundary Test: End of Buffer : TL2 ( u blk -- ) SWAP 0 <# #S #> WRITE-AT-END-OF-BLOCK ; T{ BLOCK-RND RND-TEST-BLOCK 2DUP TL2 LOAD = -> TRUE }T \ LOAD updates BLK \ u: "BLK @"; u LOAD : TL3 ( blk -- ) S" BLK @" WRITE-BLOCK ; T{ RND-TEST-BLOCK DUP TL3 DUP LOAD = -> TRUE }T \ EVALUATE resets BLK \ u: "EVALUATE-BLK@"; u LOAD : EVALUATE-BLK@ ( -- BLK@ ) S" BLK @" EVALUATE ; : TL4 ( blk -- ) S" EVALUATE-BLK@" WRITE-BLOCK ; T{ RND-TEST-BLOCK DUP TL4 LOAD -> 0 }T \ EVALUTE can nest with LOAD \ u: "BLK @"; S" u LOAD" EVALUATE : TL5 ( blk -- c-addr u ) 0 <# \ blk 0 [CHAR] D HOLD [CHAR] A HOLD [CHAR] O HOLD [CHAR] L HOLD BL HOLD #S #> ; \ c-addr u T{ RND-TEST-BLOCK DUP TL3 DUP TL5 EVALUATE = -> TRUE }T \ Nested LOADs \ u2: "BLK @"; u1: "LOAD u2"; u1 LOAD : TL6 ( blk1 blk2 -- ) DUP TL3 \ blk1 blk2 TL5 WRITE-BLOCK ; T{ 2RND-TEST-BLOCKS 2DUP TL6 SWAP LOAD = -> TRUE }T \ LOAD changes the currect block that is effected by UPDATE \ This test needs at least 2 distinct buffers, though this is not a \ requirement of the language specification. If 2 distinct buffers \ are not returned, then the tests quits with a trivial Pass : TL7 ( blk1 blk2 -- u1 u2 rnd2 blk2-addr rnd1' rnd1 ) OVER BUFFER OVER BUFFER = IF \ test needs 2 distinct buffers 2DROP 0 0 0 0 0 0 \ Dummy result ELSE OVER BLOCK-RND DUP ROT TL1 >R \ blk1 blk2 DUP S" SOURCE DROP" WRITE-BLOCK \ blk1 blk2 \ change blk1 to a new rnd, but don't UPDATE OVER BLANK-BUFFER \ blk1 blk2 blk1-addr BLOCK-RND DUP >R \ blk1 blk2 blk1-addr rnd1' 0 <# #S #> \ blk1 blk2 blk1-addr c-addr u ROT SWAP CHARS MOVE \ blk1 blk2 \ Now LOAD blk2 DUP LOAD DUP >R \ blk1 blk2 blk2-addr \ Write a new blk2 DUP 1024 BL FILL \ blk1 blk2 blk2-addr BLOCK-RND DUP >R \ blk1 blk2 blk2-addr rnd2 0 <# #S #> \ blk1 blk2 blk2-addr c-addr u ROT SWAP CHARS MOVE \ blk1 blk2 \ The following UPDATE should refer to the LOADed blk2, not blk1 UPDATE FLUSH \ blk1 blk2 \ Finally, load both blocks then collect all results LOAD SWAP LOAD \ u2 u1 R> R> R> R> \ u2 u1 rnd2 blk2-addr rnd1' rnd1 THEN ; T{ 2RND-TEST-BLOCKS TL7 \ run test procedure SWAP DROP SWAP DROP \ u2 u1 rnd2 rnd1 2= -> TRUE }T \ I would expect LOAD to work on the contents of the buffer cache \ and not the block device, but the specification doesn't say. \ Similarly, I would not expect LOAD to FLUSH the buffer cache, \ but the specification doesn't say so. \ ------------------------------------------------------------------------------ TESTING LIST and SCR \ Signatures T{ SCR DUP ALIGNED = -> TRUE }T \ LIST signature is test implicitly in the following tests... : TLS1 ( blk -- ) S" Should show a (mostly) blank screen" WRITE-BLOCK ; T{ RND-TEST-BLOCK DUP TLS1 DUP LIST SCR @ = -> TRUE }T \ Boundary Test: FIRST-TEST-BLOCK : TLS2 ( blk -- ) S" List of the First test block" WRITE-BLOCK ; T{ FIRST-TEST-BLOCK DUP TLS2 LIST -> }T \ Boundary Test: LIMIT-TEST-BLOCK : TLS3 ( blk -- ) S" List of the Last test block" WRITE-BLOCK ; T{ LIMIT-TEST-BLOCK 1- DUP TLS3 LIST -> }T \ Boundary Test: End of Screen : TLS4 ( blk -- ) S" End of Screen" WRITE-AT-END-OF-BLOCK ; T{ RND-TEST-BLOCK DUP TLS4 LIST -> }T \ BLOCK, BUFFER, UPDATE et al don't change SCR : TLS5 ( blk -- ) S" Should show another (mostly) blank screen" WRITE-BLOCK ; \ the first test below sets the scenario for the subsequent tests \ BLK is unchanged by LIST T{ BLK @ RND-TEST-BLOCK DUP TLS5 LIST BLK @ = -> TRUE }T \ SCR is unchanged by Earlier words T{ SCR @ FLUSH SCR @ = -> TRUE }T T{ SCR @ FLUSH DUP 1+ BUFFER DROP SCR @ = -> TRUE }T T{ SCR @ FLUSH DUP 1+ BLOCK DROP SCR @ = -> TRUE }T T{ SCR @ FLUSH DUP 1+ BLOCK DROP UPDATE SCR @ = -> TRUE }T T{ SCR @ FLUSH DUP 1+ BLOCK DROP UPDATE SAVE-BUFFERS SCR @ = -> TRUE }T : TLS6 ( blk -- ) S" SCR @" WRITE-BLOCK ; T{ SCR @ RND-TEST-BLOCK DUP TLS6 LOAD SCR @ OVER 2= -> TRUE }T \ ------------------------------------------------------------------------------ TESTING EMPTY-BUFFERS T{ EMPTY-BUFFERS -> }T T{ BLK @ EMPTY-BUFFERS BLK @ = -> TRUE }T T{ SCR @ EMPTY-BUFFERS SCR @ = -> TRUE }T \ Test R/W, but discarded changes with EMPTY-BUFFERS T{ RND-TEST-BLOCK \ blk DUP BLANK-BUFFER \ blk blk-addr1 1024 ELF-HASH \ blk hash UPDATE FLUSH \ blk hash OVER BLOCK CHAR \ SWAP C! \ blk hash UPDATE EMPTY-BUFFERS FLUSH \ blk hash SWAP BLOCK \ hash blk-addr2 1024 ELF-HASH = -> TRUE }T \ EMPTY-BUFFERS discards all buffers : TUF2-EB ( blk1 blk2 -- blk1 blk2 ) TUF2-1 TUF2-2 EMPTY-BUFFERS ; \ c.f. TUF2-3 T{ ' TUF2-EB 2RND-TEST-BLOCKS TUF2 2SWAP 2DROP 2= -> TRUE }T \ FLUSH and then EMPTY-BUFFERS is acceptable but untestable \ EMPTY-BUFFERS and then UPDATE is ambiguous and untestable \ ------------------------------------------------------------------------------ TESTING >IN manipulation from a block source : TIN ( blk -- ) S" 1 8 >IN +! 2 3" WRITE-BLOCK ; T{ RND-TEST-BLOCK DUP TIN LOAD -> 1 3 }T \ ------------------------------------------------------------------------------ TESTING \, SAVE-INPUT, RESTORE-INPUT and REFILL from a block source \ Try to determine the number of charaters per line \ Assumes an even number of characters per line : | ( u -- u-2 ) 2 - ; : C/L-CALC ( blk -- c/l ) DUP BLANK-BUFFER \ blk blk-addr [CHAR] \ OVER C! \ blk blk-addr blk:"\" 511 0 DO \ blk c-addr[i] CHAR+ CHAR+ [CHAR] | OVER C! \ blk c-addr[i+1] LOOP DROP \ blk blk:"\ | | | | ... |" UPDATE SAVE-BUFFERS FLUSH \ blk 1024 SWAP LOAD ; \ c/l [?DEF] C/L [?ELSE] \? .( Given Characters per Line: ) C/L U. CR [?ELSE] \? RND-TEST-BLOCK C/L-CALC CONSTANT C/L \? C/L 1024 U< [?IF] \? .( Calculated Characters per Line: ) C/L U. CR [?THEN] : WRITE-BLOCK-LINE ( lin-addr[i] c-addr u -- lin-addr[i+1] ) 2>R DUP C/L CHARS + SWAP 2R> ROT SWAP MOVE ; \ Discards to the end of the line : TCSIRIR1 ( blk -- ) BLANK-BUFFER C/L 1024 U< IF S" 2222 \ 3333" WRITE-BLOCK-LINE S" 4444" WRITE-BLOCK-LINE THEN DROP UPDATE SAVE-BUFFERS ; T{ RND-TEST-BLOCK DUP TCSIRIR1 LOAD -> 2222 4444 }T VARIABLE T-CNT 0 T-CNT ! : MARK ( "" -- ) \ Use between <# and #> CHAR HOLD ; IMMEDIATE : ?EXECUTE ( xt f -- ) IF EXECUTE ELSE DROP THEN ; \ SAVE-INPUT and RESTORE-INPUT within a single block : TCSIRIR2-EXPECTED S" EDCBCBA" ; \ Remember that the string comes out backwards : TCSIRIR2 ( blk -- ) C/L 1024 U< IF BLANK-BUFFER S" 0 T-CNT !" WRITE-BLOCK-LINE S" <# MARK A SAVE-INPUT MARK B" WRITE-BLOCK-LINE S" 1 T-CNT +! MARK C ' RESTORE-INPUT T-CNT @ 2 < ?EXECUTE MARK D" WRITE-BLOCK-LINE S" MARK E 0 0 #>" WRITE-BLOCK-LINE UPDATE SAVE-BUFFERS DROP ELSE S" 0 TCSIRIR2-EXPECTED" WRITE-BLOCK THEN ; T{ RND-TEST-BLOCK DUP TCSIRIR2 LOAD TCSIRIR2-EXPECTED S= -> 0 TRUE }T \ REFILL across 2 blocks : TCSIRIR3 ( blks -- ) DUP S" 1 2 3 REFILL 4 5 6" WRITE-BLOCK 1+ S" 10 11 12" WRITE-BLOCK ; T{ 2 RND-TEST-BLOCK-SEQ DUP TCSIRIR3 LOAD -> 1 2 3 -1 10 11 12 }T \ SAVE-INPUT and RESTORE-INPUT across 2 blocks : TCSIRIR4-EXPECTED S" HGF1ECBF1ECBA" ; \ Remember that the string comes out backwards : TCSIRIR4 ( blks -- ) C/L 1024 U< IF DUP BLANK-BUFFER S" 0 T-CNT !" WRITE-BLOCK-LINE S" <# MARK A SAVE-INPUT MARK B" WRITE-BLOCK-LINE S" MARK C REFILL MARK D" WRITE-BLOCK-LINE DROP UPDATE 1+ BLANK-BUFFER S" MARK E ABS CHAR 0 + HOLD" WRITE-BLOCK-LINE S" 1 T-CNT +! MARK F ' RESTORE-INPUT T-CNT @ 2 < ?EXECUTE MARK G" WRITE-BLOCK-LINE S" MARK H 0 0 #>" WRITE-BLOCK-LINE DROP UPDATE SAVE-BUFFERS ELSE S" 0 TCSIRIR4-EXPECTED" WRITE-BLOCK THEN ; T{ 2 RND-TEST-BLOCK-SEQ DUP TCSIRIR4 LOAD TCSIRIR4-EXPECTED S= -> 0 TRUE }T \ ------------------------------------------------------------------------------ TESTING THRU : TT1 ( blks -- ) DUP S" BLK" WRITE-BLOCK 1+ S" @" WRITE-BLOCK ; T{ 2 RND-TEST-BLOCK-SEQ DUP TT1 DUP DUP 1+ THRU 1- = -> TRUE }T \ ------------------------------------------------------------------------------ BLOCK-ERRORS SET-ERROR-COUNT CR .( End of Block word tests) CR