NEW
PREFIX /A2OSX.BUILD
AUTO 4,1
				.LIST OFF
				.OP	65C02
				.OR	$2000
				.TF /A2OSX.BUILD/SYS/KM.VSDRIVE
*--------------------------------------
				.INB /A2OSX.BUILD/INC/MACROS.I
				.INB /A2OSX.BUILD/INC/IO.I
				.INB /A2OSX.BUILD/INC/MONITOR.I
				.INB /A2OSX.BUILD/INC/PRODOS.I
				.INB /A2OSX.BUILD/INC/MLI.ERR.I
				.INB /A2OSX.BUILD/INC/COM.6551.I
*--------------------------------------
TmpPtr1			.EQ	$0
ADT.CMD.VSD		.EQ $C5					"E": Virtual Drive Command Envelope
ADT.CMD.PING	.EQ $D9					"Y": PING
DRV.EntryPoint	.EQ $BF41
*--------------------------------------
VSDRIVE.Init	>LDAXI VSDRIVE.MSG0
				jsr PrintFAX

				jsr VSDRIVE.Check
				bcs .90
	
.1				lda #$C1				Self Modified

.2				jsr SSC.Detect
				bcs .99

				stx DRV+2				DRV.Slotn0

				sta .1+1				Slot Cn
				
				and #$0F
				pha						slot n
				
				>LDAXI VSDRIVE.SSCOK
				jsr PrintFAX

				jsr VSDRIVE.Ping

				bcs .92

				>LDAXI VSDRIVE.SRVOK
				jsr PrintFAX

				jsr VSDRIVE.SetSlot
				bcs .91
				
				pha						save slot
				pha						2 times
				>LDAXI VSDRIVE.DEVOK
				jsr PrintFAX

				jsr VSDRIVE.Install
				
				>LDAXI VSDRIVE.OK
				jsr PrintFAX
				rts
				
.90				>LDAXI VSDRIVE.DRVKO
				jsr PrintFAX
				rts
				
.91				>LDAXI VSDRIVE.NOSLOT
				jsr PrintFAX
				rts
				
.92				>LDAXI VSDRIVE.SRVKO
				jsr PrintFAX
				
				inc .1+1
				lda .1+1
				cmp #$C8
				bne .2					Go try next SSC....

.99				>LDAXI VSDRIVE.SSCKO
				jsr PrintFAX
				rts
*--------------------------------------
VSDRIVE.Check	bit RRAMWRAMBNK2
				bit RRAMWRAMBNK2

				clc
				lda $D001
				eor DRV
				bne .8
				lda $D002
				eor DRV+1
				bne .8
				sec
				
.8				bit RROMBNK1
				rts
*--------------------------------------
SSC.Detect		stz TmpPtr1
				sta TmpPtr1+1
				
.1				ldx #DEVSIG.Value-DEVSIG.Offset-1

.2				ldy DEVSIG.Offset,x
				lda (TmpPtr1),y
				cmp DEVSIG.Value,x
				bne .3
				
				dex
				bpl .2
				
				lda TmpPtr1+1			A=SlotCN
				asl
				asl
				asl
				asl
				tax						X=SlotN0
							
				stz SSC.RESET,x 
				
				jsr VSDRIVE.Wait
				
				lda #SSC.CTL.CLKINT+SSC.CTL.B115200+SSC.CTL.8D+SSC.CTL.1S+SSC.CMD.NOP
				sta SSC.CTL,x
				
				jsr VSDRIVE.Wait
				
				lda #SSC.CMD.RIRQDIS+SSC.CMD.TE+SSC.CMD.DTR
				sta SSC.CMD,x				
				
				jsr VSDRIVE.Wait

				lda TmpPtr1+1			A=Slot Cn, X=n0

				clc
				rts						X=SlotN0, A=SlotCN
				
.3				inc TmpPtr1+1			no match, try next slot....
				lda TmpPtr1+1
				cmp #$C8
				bne .1	
				
.9				sec
				rts
*--------------------------------------
VSDRIVE.Ping	ldx DRV+2				DRV.Slotn0
			
				stz VSDRIVE.Ping.TO
				stz VSDRIVE.Ping.TO+1
				
				ldy #10
				
.1				lda SSC.STATUS,x
				and #SSC.STATUS.TDRE	Ready for transmit?
				bne .20
			
				jsr	VSDRIVE.IncTimer	Wait.......
				bne .1
				dey
				bne .1
				
				lda #1
				
.9				sec
				rts						Time Out.....
				
				stz VSDRIVE.Ping.TO
				stz VSDRIVE.Ping.TO+1

.20				ldy #5					5 bytes to send

.2				lda VSDRIVE.CMDS-1,y
				sta SSC.DATA,x
				
				jsr VSDRIVE.Wait
				
.3				lda SSC.STATUS,x
				and #SSC.STATUS.TDRE	char transmitted?
				bne .4

				jsr	VSDRIVE.IncTimer
				bne .3
				lda #2
				bra .9
				
.4				dey
				bne .2					next byte
				
				lda #521^$ffff			522 bytes to recieve
				sta VSDRIVE.Ping.BC
				lda /521^$ffff
				sta VSDRIVE.Ping.BC+1
				
				stz VSDRIVE.Ping.TO
				stz VSDRIVE.Ping.TO+1
				
.5				lda SSC.STATUS,x
				and #SSC.STATUS.RDRF	incoming char?
				bne .6
				
				jsr	VSDRIVE.IncTimer
				bne .5
				
				lda #3
				bra .9
				
.6				lda SSC.DATA,x
				inc VSDRIVE.Ping.BC
				bne .5
				inc VSDRIVE.Ping.BC+1
				bne .5
				
				clc
				rts
*--------------------------------------
VSDRIVE.IncTimer
				inc VSDRIVE.Ping.TO
				bne .8
				inc VSDRIVE.Ping.TO+1
.8				rts
*--------------------------------------
VSDRIVE.Wait	lda #0
				
.1				dec
				bne .1
				rts
*--------------------------------------			
VSDRIVE.CMDS	.HS C6.00.00.03
				.DA #ADT.CMD.VSD
*				C6=C5 eor 03 eor 00 eor 00				
VSDRIVE.Ping.TO	.BS 2
VSDRIVE.Ping.BC	.BS 2			
*--------------------------------------
* Find 2 free slots in DEVPTRS (D1 & D2)
*--------------------------------------
VSDRIVE.SetSlot	ldx #2					Starts at Slot1

.1				lda DEVPTRS,x			Drive1
				cmp DEVPTRS				pointing to S0D1 NODEV ?
				bne .2
				lda DEVPTRS+1,x
				cmp DEVPTRS+1
				bne .2
				lda DEVPTRS+16,x		Drive2
				cmp DEVPTRS
				bne .2
				lda DEVPTRS+17,x
				cmp DEVPTRS+1
				bne .2
				
				lda #DRV.EntryPoint
				sta DEVPTRS,x
				sta DEVPTRS+16,x
				lda /DRV.EntryPoint
				sta DEVPTRS+1,x
				sta DEVPTRS+17,x
				
				txa
				asl
				asl
				asl
				ora #$0D
				ldy DEVCNT
				iny
				sta DEVLST,y			add Drv1
				ora #$80
				iny
				sta DEVLST,y			add Drv2
				sty DEVCNT
					
				txa
				lsr						exit with A=SLOT
				clc
				rts
				
.2				inx
				inx
				cpx #16
				bne .1
				rts						sec from CPX
*--------------------------------------
VSDRIVE.Install	ldx #PATCH.SIZE

.1				lda PATCH-1,x
				sta DRV.EntryPoint-1,x
				dex
				bne .1
				
				bit RRAMWRAMBNK2
				bit RRAMWRAMBNK2
				
				ldx #DRV.SIZE
				
.2				lda DRV-1,x
				sta $D000,x
				dex
				bne .2
				
				bit RROMBNK1
				
				clc
				rts
*--------------------------------------
				.INB /A2OSX.SRC/X.PRINTF.S
*--------------------------------------
DEVSIG.Offset	.HS 05070B0C
DEVSIG.Value	.HS 38180131
VSDRIVE.MSG0	>CSTR "VSDRIVE (ADTPro Vitual Serial HD) Driver For A2osX\n"
VSDRIVE.DRVKO	>CSTR "VSDRIVE (Or other custom Driver) Already Installed.\n"
VSDRIVE.SSCKO	>CSTR "SSC Not Detected.\n"
VSDRIVE.SSCOK	>CSTR "SSC Found At Slot %d.\nContacting ADTPro Server..."
VSDRIVE.SRVKO	>CSTR "No Response From ADTPro Server.\n"
VSDRIVE.SRVOK	>CSTR "ADTPro Server Is Online.\n"
VSDRIVE.NOSLOT	>CSTR "No ProDOS device slot available.\n"
VSDRIVE.DEVOK	>CSTR "VSDRIVE Installed 2 devices at S%d,D1 & S%d,D2.\n"
VSDRIVE.OK		>CSTR "VSDRIVE Driver Successfully Installed.\n"
*--------------------------------------
* ProDOS $BE41->$BE4B Patch for switching to BANK2 (10 bytes)
*--------------------------------------
PATCH			.PH DRV.EntryPoint
				bit RRAMWRAMBNK2
				jsr $D001
				bit RRAMWRAMBNK1
				rts
				.EP
PATCH.SIZE		.EQ *-PATCH
*--------------------------------------
* Driver
*--------------------------------------
* OP = 2 : Write drv1
* OP = 3 : Read  drv1
* OP = 4 : Write drv2
* OP = 5 : Read  drv2
* CMD = $C5+OP+BLKLO+BLKHI+CHKSUM
* DO NOT trash DRV.COMMAND...DRV.BLKNUM as ProDOS 
* reuses them after Block operation
* A1,A2 are used by Disk II Driver, 
* so we use it safely as Tmp Ptr
*--------------------------------------
DRV.A1L			.EQ $3C
DRV.A1H			.EQ $3D
DRV.A2L			.EQ $3E
DRV.A2H			.EQ $3F
DRV.COMMAND 	.EQ $42
DRV.UNITNUM		.EQ $43
DRV.BUFF		.EQ $44        
DRV.BLKNUM		.EQ $46
*--------------------------------------
DRV				.EQ *
				.PH	$D001				Main LC Bnk 2 $D001->$DFFF
				cld
DRV.Slotn0		ldx #$ff				Self Modified
				lda DRV.COMMAND			S=0,R=1,W=2,F=3
				bne .1
				
				ldx #$ff				return Status
				ldy #$ff
.8				lda #0					
				clc
				rts
				
.1				cmp #3
				beq .8					Format ....
*				bcs DRV.DO.CMD.ERR		more....IO error

				ora	#2					W=2,R=3
				ldy DRV.UNITNUM		
				bpl .2
				
				adc #2					CC from bcs
				
.2				sta DRV.CmdBuf.Cmd		store cmd
				eor #ADT.CMD.VSD
				eor DRV.BLKNUM
				eor DRV.BLKNUM+1
				sta DRV.CmdBuf.Sum		Compute & store CheckSum
				
				lda DRV.BLKNUM
				sta DRV.CmdBuf.BlkL

				lda DRV.BLKNUM+1
				sta DRV.CmdBuf.BlkH
				
* send CMD+CS
				ldy #4					Send 5 bytes including Sum
				
.3				lda DRV.CmdBuf.Sum,y
				jsr DRV.SSCSend
				dey
				bpl .3
				
				ldy #8

.5				lda DRV.READWRITE,y
				sta $100,y
				dey
				bpl .5
*--------------------------------------
				lda DRV.COMMAND
				dec						1-1=0 if read
				bne DRV.DO.CMD.W		go write
*--------------------------------------
* Read block
*--------------------------------------
DRV.DO.CMD.R	ldy #3					Read Back and check 4 bytes
				
.1				jsr DRV.SSCGet
				eor DRV.CmdBuf.BlkH,y
				bne DRV.DO.CMD.ERR
				dey
				bpl .1
				
				ldy #4					Read 4 bytes DATE/TIME + 1 Byte Checksum
				
.2				jsr DRV.SSCGet

				eor DRV.CmdBuf.Sum
				sta DRV.CmdBuf.Sum
				dey
				bpl .2

				tay						Last EOR was with Checksum, must be 0
				bne DRV.DO.CMD.ERR
				
* Y=0 from TAY

				stz DRV.CmdBuf.Sum
				sec
				
.3				jsr DRV.SSCGet
				jsr $100
				eor DRV.CmdBuf.Sum
				sta DRV.CmdBuf.Sum
				iny
				bne .3
				
				bcc .4
				inc DRV.BUFF+1
				clc
				bcc .3

.4				dec DRV.BUFF+1
				
				jsr DRV.SSCGet
				
				eor DRV.CmdBuf.Sum
				bne DRV.DO.CMD.ERR
				rts						A=0,CC from bcc .4
*--------------------------------------
DRV.DO.CMD.ERR1	pla
				pla
				
DRV.DO.CMD.ERR	lda #MLI.E.IO	
				sec
				rts
*--------------------------------------
* Write Block				
*--------------------------------------
DRV.DO.CMD.W	lda #$B1				lda (),y

				sta $103
				
				ldy #0

				stz DRV.CmdBuf.Sum

				sec
				
.1				jsr $100
				jsr DRV.SSCSend
				eor DRV.CmdBuf.Sum
				sta DRV.CmdBuf.Sum
				iny
				bne .1
				
				bcc .2
				
				inc DRV.BUFF+1
				clc
				bcc .1
				
.2				dec DRV.BUFF+1
				
* A = DRV.CmdBuf.Sum

				jsr DRV.SSCSend

* read back CMD				

				ldy #4					Read 5 bytes (echo from server)
				
.3				jsr DRV.SSCGet

				eor DRV.CmdBuf.Sum,y	Check 5 bytes (including block Sum)
				bne DRV.DO.CMD.ERR
				dey
				bpl .3
				rts
*--------------------------------------
DRV.SSCSend		sta .2+1
				
.1				lda SSC.STATUS,x
*				bit #SSC.STATUS.DCD+SSC.STATUS.DSR
*				beq DRV.DO.CMD.ERR1
				
				and #SSC.STATUS.TDRE	Outgoing char?
				beq .1
				
.2				lda #$ff
				sta SSC.DATA,x
				
				rts
*--------------------------------------
DRV.SSCGet		lda SSC.STATUS,x
*				bit #SSC.STATUS.DCD+SSC.STATUS.DSR
*				beq DRV.DO.CMD.ERR1
				
				and #SSC.STATUS.RDRF	incoming char?
				beq	DRV.SSCGet
				
				lda SSC.DATA,x
				rts
*--------------------------------------
DRV.READWRITE	bit RRAMWRAMBNK1
				sta (DRV.BUFF),y
				bit RRAMWRAMBNK2
				rts 
*--------------------------------------
DRV.CmdBuf.Sum	.BS 1					Reverse order for dey 
DRV.CmdBuf.BlkH	.BS 1
DRV.CmdBuf.BlkL	.BS 1
DRV.CmdBuf.Cmd	.BS 1
DRV.CmdBuf.Env	.DA #ADT.CMD.VSD
*--------------------------------------
				.EP
*--------------------------------------
				.LIST ON
DRV.SIZE		.EQ *-DRV
				.LIST OFF
*--------------------------------------
* CONTROL SECTION :
*--------------------------------------
				.DO DRV.SIZE>255
*				ERROR:DRV.SIZE too big
				.FIN
*--------------------------------------
MAN
SAVE /A2OSX.SRC/SYS/KM.VSDRIVE.S
ASM