NEW
  AUTO 3,1
				.LIST OFF	
				.OP	65C02
				.OR	$2000
				.TF drv/uthernet2.drv
*--------------------------------------
				.INB inc/macros.i
				.INB inc/a2osx.i
				.INB inc/kernel.i
				.INB inc/mli.e.i
				.INB inc/nic.i
				.INB inc/nic.w5100.i
				.INB inc/eth.i
*--------------------------------------
ZPArgPtr		.EQ ZPBIN
DEVSLOT0x		.EQ ZPBIN+2
*--------------------------------------
*			File Header (16 Bytes)
*--------------------------------------
CS.START		cld
				jmp Dev.Detect			cld,jmp abs=DRV
				.DA #$61				6502,Level 1 (65c02)
				.DA #1					DRV Layout Version 1
				.DA 0
				.DA CS.END-CS.START		Code Length
				.DA 0
				.DA 0
				.DA 0
*--------------------------------------
* Relocation Table
*--------------------------------------
L.MSG.DETECT	.DA MSG.DETECT
L.MSG.DETECT.OK	.DA MSG.DETECT.OK
L.MSG.DETECT.KO	.DA MSG.DETECT.KO
L.DRV.CS.START	.DA DRV.CS.START
L.FD.DEV		.DA FD.DEV
L.FD.DEV.NAME	.DA FD.DEV.NAME
L.SSCANF.MAC	.DA SSCANF.MAC
L.MAC0			.DA DCB+S.DCB.NIC.MAC
L.MAC1			.DA DCB+S.DCB.NIC.MAC+1
L.MAC2			.DA DCB+S.DCB.NIC.MAC+2
L.MAC3			.DA DCB+S.DCB.NIC.MAC+3
L.MAC4			.DA DCB+S.DCB.NIC.MAC+4
L.MAC5			.DA DCB+S.DCB.NIC.MAC+5
				.DA 0					End Of Reloc Table
*--------------------------------------
Dev.Detect		>STYA ZPArgPtr

				>LDYA L.MSG.DETECT
				>SYSCALL PutS

				ldx #$70+$88
				ldy #7

.1				lda A2osX.S,y		IO based detection, avoid scanning in Disk Controller IO!!!!
				bne .2

				lda #W5100.MR.RST
				sta W5100.MR,x

				lda #0

.10				dec						give some time....
				bne .10

				lda #W5100.MR.PB+W5100.MR.AI+W5100.MR.IND
				sta W5100.MR,x

				pha
				pla

				lda W5100.MR,x
				cmp #W5100.MR.PB+W5100.MR.AI+W5100.MR.IND
				bne .2

				>AR.SELECT RTR
				lda W5100.DR,x		Get RTR HI
				cmp /2000
				bne .2

				lda W5100.DR,x		Get RTR LO 
				cmp #2000
				beq	.3

.2				dec FD.DEV.NAME+3
				txa
				sec
				sbc #$10
				tax
				dey
				bne .1

				>LDYA L.MSG.DETECT.KO
				>SYSCALL PutS

				lda #MLI.E.NODEV
				sec
				rts

.3				stx DEVSLOTx0
				sty DEVSLOT0x

				jsr Dev.ParseArgs
				bcs .99

				>PUSHW L.MSG.DETECT.OK
				>PUSHW L.FD.DEV.NAME
				>PUSHBI 2
				>SYSCALL PrintF

				>PUSHWI DRV.END
				>PUSHWI DRV.CS.END-DRV.CS.START
				>PUSHWI DRV.CS.START
				>LDYA L.DRV.CS.START
				>SYSCALL InsDrv
.99				bcs .9

				>STYA FD.DEV+S.FD.DEV.DRVPTR

				>PUSHW L.FD.DEV
				>PUSHW L.FD.DEV.NAME
				>SYSCALL MKDev
				bcs .9

				ldx DEVSLOT0x
				lda #A2osX.S.NIC
				sta A2osX.S,x
*				clc
.9				rts
*--------------------------------------
Dev.ParseArgs	lda (ZPArgPtr)
				bne .1

				lda A2osX.R16
				eor A2osX.T16
				sta DCB+S.DCB.NIC.MAC+3
				eor A2osX.R16+1
				sta DCB+S.DCB.NIC.MAC+4
				eor A2osX.T16+1
				sta DCB+S.DCB.NIC.MAC+5
				clc
				rts

.1				>PUSHW ZPArgPtr
				>PUSHW L.SSCANF.MAC
				
				ldx #0

.2				>PUSHW L.MAC0,x
				inx
				inx
				cpx #12
				bne .2
				
				>PUSHBI 12				6 x byte PTRs
				
				>SYSCALL SScanF
				bcc .8

				lda #E.SYN
*				sec
.8				rts
*--------------------------------------
CS.END
MSG.DETECT		.CZ "UtherNet2/W5100 Driver."
MSG.DETECT.OK	.CZ "UtherNet2/W5100 Installed As Device : %s\r\n"
MSG.DETECT.KO	.CZ "Hardware Not Found."
SSCANF.MAC		.CZ "%h:%h:%h:%h:%h:%h"
*--------------------------------------
FD.DEV			.DA #S.FD.T.CDEV
				.DA #0					HANDLER
				.DA #0					BUSID
				.DA #0					DEVID
				.DA 0					BUSPTR
				.BS 2					DRVPTR
				.DA 0					DCBPTR
				.DA 0					BUFPTR
FD.DEV.NAME		.AZ "eth7"
*--------------------------------------
*			Driver Code
*--------------------------------------
ZPIOCTL			.EQ ZPDRV
ZPBufPtr		.EQ ZPDRV+2
Counter			.EQ ZPDRV+4
Offset			.EQ ZPDRV+6
RXTX.Size		.EQ ZPDRV+8
BUF.Size		.EQ ZPDRV+10
*--------------------------------------
DRV.CS.START	cld
				jmp (.1,x)
.1				.DA STATUS
				.DA A2osX.BADCALL
				.DA A2osX.BADCALL
				.DA A2osX.BADCALL
				.DA A2osX.BADCALL
				.DA A2osX.BADCALL
				.DA OPEN
				.DA CLOSE
				.DA READ
				.DA WRITE
				.DA 0					end or relocation
*--------------------------------------
STATUS			jsr GET.IOCTLBUFPTR

				ldy #S.IOCTL.S
				lda (ZPIOCTL),y
				beq .1

				cmp #S.IOCTL.S.GETDIB
				bne STATUS.DCB

				ldy #S.DIB-1
				.HS 2C					bit abs

.1				ldy #3

.2				lda DIB,y
				sta (ZPBufPtr),y
				dey
				bpl .2

				clc
				rts

STATUS.DCB		cmp #S.IOCTL.S.GETDCB
				bne STATUS.9

				ldy #S.DCB.NIC-1

.1				lda DCB,y
				sta (ZPBufPtr),y
				dey
				bpl .1

				clc
				rts

STATUS.9		lda #MLI.E.BADCTL
				sec
				rts
*--------------------------------------
OPEN			lda #S.DIB.S.OPENED
				bit DIB+S.DIB.S
				beq OPEN.I

				lda #MLI.E.OPEN
				sec
				rts

OPEN.I			jsr CLOSE

*				ldx DEVSLOTx0			Done by CLOSE

				lda #W5100.MR.PB+W5100.MR.AI+W5100.MR.IND
				sta W5100.MR,x

				>AR.SELECT SHAR
				ldy	#0

.1				lda DCB+S.DCB.NIC.MAC,y
				sta W5100.DR,x
				iny
				cpy #6
				bne .1

				>AR.SELECT RMSR
				lda #3					8k,0k,0k,0k
				sta W5100.DR,x		...for Socket RX Buffers
				sta W5100.DR,x		...for Socket TX Buffers

				>AR.SELECT S0.MR
				lda #W5100.AR.Sn.MR.MACRAW+W5100.AR.Sn.MR.MF
				sta W5100.DR,x

				>AR.SELECT S0.CR
				lda #W5100.AR.Sn.CR.OPEN
				sta W5100.DR,x

				lda #S.DIB.S.OPENED
				tsb DIB+S.DIB.S
				
				clc
				rts
*--------------------------------------
CLOSE			ldx DEVSLOTx0

				lda #W5100.MR.RST
				sta W5100.MR,x

				lda $C019				we can use VBL as we are not on //c
.1				eor $C019
				bpl .1
				lda $C019
.2				eor $C019
				bpl .2
				
				lda #S.DIB.S.OPENED
				trb DIB+S.DIB.S
				
				clc
				rts
*--------------------------------------
READ			php
				sei

				>STYA ZPIOCTL

				ldx DEVSLOTx0

				>AR.SELECT S0.RX.RSR
				lda W5100.DR,x			get the received size HI
				nop
				nop
				ora W5100.DR,x      	LO
				bne .1

				jmp READWRITE.NODATA

.1				>AR.SELECT S0.RX.RD
				lda W5100.DR,x			get the received ptr HI
				sta Offset+1
				ldy W5100.DR,x			get the received ptr LO
				sty Offset

				and /RXTX.MASK
				ora /RX.BASE
				sta W5100.AR,x
				tya
				sta W5100.AR+1,x

				lda W5100.DR,x			get RX.Size HI (Frame size + 2)
				sta RXTX.Size+1
				lda W5100.DR,x			get RX.Size LO
				sta RXTX.Size

				ldy #S.IOCTL.BYTECNT
				sec
				sbc #2					MACRAW:strip 2 bytes Header from Size 
				sta (ZPIOCTL),y
				sta BUF.Size
				eor #$ff
				sta Counter

				iny
				lda RXTX.Size+1
				sbc #0
				sta (ZPIOCTL),y
				sta BUF.Size+1
				eor #$ff
				sta Counter+1

				>LDYA BUF.Size
				>SYSCALL2 GetMem
				bcs READWRITE.9

				>STYA ZPBufPtr
				phx

				phy
				ldy #S.IOCTL.BUFPTR+1
				sta (ZPIOCTL),y
				dey
				pla
				sta (ZPIOCTL),y

				ldy #0

				ldx DEVSLOTx0
			
.2				inc Counter
				bne .3

				inc Counter+1
				beq .4

.3				lda W5100.DR,x
				sta (ZPBufPtr),y
				iny
				bne .2

				inc ZPBufPtr+1
				bra .2

.4				>AR.SELECT S0.RX.RD

				lda Offset
				clc
				adc RXTX.Size
				pha						save LO

				lda Offset+1
				adc RXTX.Size+1
				sta W5100.DR,x			write HI
				pla
				sta W5100.DR,x			write LO

				>AR.SELECT S0.CR
				lda #W5100.AR.Sn.CR.RCVD
				sta W5100.DR,x

				pla						hMem

				plp
				clc
				rts			
*--------------------------------------
READWRITE.NODATA
				lda #E.NODATA

READWRITE.9		plp
				sec
				rts
*--------------------------------------
WRITE			php
				sei

				jsr GET.IOCTLBUFPTR

				ldy #S.IOCTL.BYTECNT
				lda (ZPIOCTL),y
				sta RXTX.Size
				eor #$ff
				sta Counter

				iny
				lda (ZPIOCTL),y
				sta RXTX.Size+1
				eor #$ff
				sta Counter+1

				ldx DEVSLOTx0

				>AR.SELECT S0.TX.FSR
				lda W5100.DR,x		get send size HI
				nop
				nop
				ldy W5100.DR,x      LO
				cpy RXTX.Size
				sbc RXTX.Size+1
				bcc READWRITE.NODATA

				ldy #S.ETH.SRCMAC+5
				ldx #5

.1				lda DCB+S.DCB.NIC.MAC,x
				sta (ZPBufPtr),y
				dey
				dex
				bpl .1

				ldx DEVSLOTx0

				>AR.SELECT S0.TX.WR
				lda W5100.DR,x			Get HI
				nop
				nop
				ldy W5100.DR,x			Get LO
				and /RXTX.MASK
				ora /TX.BASE
				sta W5100.AR,x			Write HI
				sta Offset+1
				tya
				sta W5100.AR+1,x		Write LO
				sta Offset

				ldy #0

.2				inc Counter
				bne .3

				inc Counter+1
				beq .8

.3				lda (ZPBufPtr),y
				sta W5100.DR,x
				iny
				bne .2

				inc ZPBufPtr+1
				bra .2

.8				>AR.SELECT S0.TX.WR
				lda Offset
				clc
				adc RXTX.Size
				pha						save LO
				lda Offset+1
				adc RXTX.Size+1
				sta W5100.DR,x			write HI
				pla
				sta W5100.DR,x			write LO

				>AR.SELECT S0.CR
				lda #W5100.AR.Sn.CR.SEND
				sta W5100.DR,x

				plp
				clc
				rts
*--------------------------------------
GET.IOCTLBUFPTR	>STYA ZPIOCTL
				ldy #S.IOCTL.BUFPTR
				lda (ZPIOCTL),y
				sta ZPBufPtr
				iny
				lda (ZPIOCTL),y
				sta ZPBufPtr+1
				rts
*--------------------------------------
DRV.CS.END
DEVSLOTx0		.BS 1
*--------------------------------------
DIB				.DA #0
				.DA #0,#0,#0			size
				.PS "UtherNetII/W5100"
				.DA #S.DIB.T.NIC
				.BS 1					Subtype
				.DA K.VER				Version
*--------------------------------------
DCB				.DA #S.DCB.T.NIC
				.DA #0					FLAGS
				.DA #S.DCB.NIC.LINK.OK+S.DCB.NIC.LINK.FD
				.DA #S.DCB.NIC.SPEED.100
				.HS 0008DC123456		MAC
				.BS 12					IP/MASK/GW
*--------------------------------------
DRV.END
MAN
SAVE usr/src/drv/uthernet2.drv.s
ASM