A2osX/ProDOS.FX/ProDOS.S.XDOS.F.txt
burniouf 74acfeccd1 KERNEL & DRVs : lot of fixes around DEV.Open() , KCONFIG
SH : fiw for line wrap
ProDOS.FX : removed a strange bug inherited from 2.0.3 trashing FCBs
2023-11-26 14:17:41 +01:00

1034 lines
26 KiB
Plaintext
Raw Permalink Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

NEW
AUTO 3,1
*--------------------------------------
* 'detree' deallocates blocks from tree files. it is assumed that the device has
* been pre-selected and the 'XDOS.GBuf' may be used.
*
* on entry:
* stortype = storage type in upper nibble, lower nibble is undisturbed.
* XDOS.1stBLK = first block of file (index or data).
* deblock = 0
* dtree = ptr to 1st block with data to be deallocated at tree level.
* dsap = ptr to 1st block at sapling level.
* dseed = byte (0-511) position to be zeroed from (inclusive).
*
* on exit:
* stortype = modified result of storage type (if applicable).
* XDOS.1stBLK = modified if storage type changed.
* deblock = total number of blocks freed at all levels.
* dtree, dsap, deseed unchanged.
*
* to trim a tree to a seed file, both dtree and dsap must be zero.
* to go from tree to sapling, dtree alone must be zero.
*--------------------------------------
detree lda stortyp which kind of tree ?
cmp #$20 is it a 'seed' ?
bcc L4C46 if yes.
cmp #$30 a sapling ?
bcc L4C51 if yes.
cmp #$40 is it at least a 'tree' ?
bcc L4C59 branch if it is.
lda #$0C block allocation error.
jsr GP.SYSDEATH P8 system death vector
* seedling file type - make sure first desirable block is the only
* block available in a seedling file.
L4C46 lda dsap
ora dtree
bne L4CC2
jmp seedel0
* sapling file type - make sure first desirable block is within the range of
* blocks available in a sapling file
L4C51 lda dtree can't have any blocks in this range
bne L4CC2 if so then done
jmp sapdel0 else go deallocate
L4C59 lda #$80
sta topdest for tree top start at end, work backwards.
L4C5E jsr drdfrst read specified first block into XDOS.GBuf.
bcs L4CC2 return errors.
ldy topdest get current pointer to top indexes.
cpy dtree have enough sapling indexes been
beq L4CC3 deallocated? yes, now deallocate blocks
ldx #$07 buffer up to 8 sapling index block
L4C6D lda XDOS.GBuf,y addresses. fetch low block address
sta dealbufl,x and save it.
ora XDOS.GBuf+$100,y is it a real block that is allocated?
beq L4C81 branch if phantom block.
lda XDOS.GBuf+$100,y fetch high block address
sta dealbufh,x and save it.
dex decrement and test for dealc buf filled.
bmi L4C93 branch if 8 addresses fetched.
L4C81 dey look for end of deallocation limit.
cpy dtree is this the last position on tree level?
bne L4C6D if not.
iny
L4C8A stz dealbufl,x fill rest of dealc buffer with null addresses.
stz dealbufh,x
dex
bpl L4C8A
L4C93 dey decrement to prepare for next time.
sty topdest save index.
ldx #$07
L4C99 stx dtmpx save index to dealc buf.
lda dealbufl,x
sta ZP.BLKNUM
ora dealbufh,x finished ?
beq L4C5E branch if done with this level.
lda dealbufh,x complete address with high byte,
sta ZP.BLKNUM+1
jsr XDOS.ReadGBuf read sapling level into XDOS.GBuf.
bcs L4CC2 return errors.
jsr XDOS.DeallocBlk0 go free all data indexes in this block
bcs L4CC2
jsr XDOS.WriteGBuf write the flipped index block
bcs L4CC2
ldx dtmpx restore index to dealc buff.
dex are there more to free?
bpl L4C99 branch if so.
bmi L4C5E branch always to get up to 8 more
L4CC2 rts sapling block numbers.
L4CC3 ldy dtree deallocate all sapling blocks greater
iny than specified block.
jsr XDOS.DeallocBlkY (master index in XDOS.GBuf)
bcs L4CC2 if errors.
jsr XDOS.WriteGBuf write updated master index back to disk.
bcs L4CC2
ldy dtree figure out if tree can become sapling.
beq L4CEB branch if it can.
lda XDOS.GBuf,y otherwise, continue with partial, deallocation of last sapling index.
ora XDOS.GBuf+$100,y is there such a sapling index block ?
beq L4CC2 all done if not.
lda XDOS.GBuf,y
ldx XDOS.GBuf+$100,y read in sapling level to be modified.
jsr XDOS.ReadGBufAX read highest sapling index into XDOS.GBuf.
bcc L4CF5
rts
L4CEB jsr shrink shrink tree to sapling
bcs L4CC2
sapdel0 jsr drdfrst read specified sapling level index
bcs L4CC2 into XDOS.GBuf. branch if error.
L4CF5 ldy dsap pointer to last of desirable indexes.
iny inc to 1st undesirable.
beq L4D05 branch if all are desirable.
jsr XDOS.DeallocBlkY deallocate all indexes above specified.
bcs L4CC2
jsr XDOS.WriteGBuf write out the index block
bcs L4CC2
L4D05 ldy dsap prepare to clean up last data block.
beq L4D1F branch if possibility of making a seed.
L4D0A lda XDOS.GBuf,y fetch low order data block address.
ora XDOS.GBuf+$100,y is it a real block ?
beq L4CC2 if not, then done.
lda XDOS.GBuf,y
ldx XDOS.GBuf+$100,y
jsr XDOS.ReadGBufAX go read data block into XDOS.GBuf.
bcc L4D2E branch if good read
L4D1E rts or return error.
L4D1F lda dtree are both tree and sap levels zero ?
bne L4D0A if not.
jsr shrink reduce this sap to a seed.
bcs L4D1E if error.
seedel0 jsr drdfrst go read data block.
bcs L4D1E if error.
L4D2E ldy dseed+1 check high byte for no deletion.
beq L4D39 branch if all of 2nd page to be deleted.
dey if dseed > $200 then all were done.
bne L4D1E branch if that is the case.
ldy dseed clear only bytes >= dseed.
L4D39 lda #$00
L4D3B sta XDOS.GBuf+$100,y zero out unwanted data
iny
bne L4D3B
ldy dseed+1 is that all ?
bne L4D4F yes.
ldy dseed
L4D49 sta XDOS.GBuf,y
iny
bne L4D49
L4D4F jmp XDOS.WriteGBuf update data block to disk.
L4D52 rts return error status.
drdfrst lda XDOS.1stBLK read specified 1st block into XDOS.GBuf
ldx XDOS.1stBLK+1
jmp XDOS.ReadGBufAX go read it
*--------------------------------------
* beware that dealloc may bring in a new bitmap block and may destroy
* locations 46 and 47 which are used to point to the current index block.
*--------------------------------------
shrink ldx XDOS.1stBLK+1 first deallocate top index block
phx
lda XDOS.1stBLK
pha save block address of this index block.
jsr XDOS.DeallocAX free it from the bitmap
pla
sta ZP.BLKNUM set master of sapling
pla index block address.
sta ZP.BLKNUM+1
bcs L4D1E report errors.
lda XDOS.GBuf get # of new 1st block from old index.
sta XDOS.1stBLK
lda XDOS.GBuf+$100
sta XDOS.1stBLK+1
ldy #$00
jsr XDOS.SwapGBUFY flip that one entry in old top index.
sec now change file type,
lda stortyp from tree to sapling,
sbc #$10 or from sapling to seed.
sta stortyp
jmp XDOS.WriteGBuf write the (deallocated) old top index.
*--------------------------------------
XDOS.DeallocBlk0
ldy #$00 start at beginning.
XDOS.DeallocBlkY
lda ZP.BLKNUM save disk address of XDOS.GBuf's data.
pha
lda ZP.BLKNUM+1
pha
.1 lda XDOS.GBuf,y get low address of block to deallocate.
cmp #$01 test for null block into carry.
ldx XDOS.GBuf+$100,y get remainder of block address.
bne .2 branch if not null.
bcc .3 was the low part null too ?
.2 phy
* sty saptr save current index.
jsr XDOS.DeallocAX free it up on volume bitmap.
ply
bcs XDOS.PopBlkNumRTS return any error.
* ldy saptr get index to sapling level index block.
jsr XDOS.SwapGBUFY
.3 iny next block address.
bne .1 if more to deallocate or test.
clc no error.
*--------------------------------------
XDOS.PopBlkNumRTS
plx restore blocknm (16 bit)
stx ZP.BLKNUM+1 keeping A and C if error
plx
stx ZP.BLKNUM
rts
*--------------------------------------
XDOS.SwapGBUFY lda delflag swapping or zeroing ?
bne .1 skip if swapping.
tax make x = 0.
beq .2 zero the index (always taken).
.1 ldx XDOS.GBuf+$100,y index high
lda XDOS.GBuf,y index low
.2 sta XDOS.GBuf+$100,y save index high
txa
sta XDOS.GBuf,y save index low
rts done.
*--------------------------------------
* MEMMGR memory manager
*
* allocate buffer in memory tables
*--------------------------------------
alcbuffr ldy #$04 index to user specified buffer.
alcbufr1 lda (ZP.A3L),y this buffer must be on a page boundary.
tax save for validation.
cmp #$08
bcc L4E1E cannot be lower than video !
cmp #$BC nor greater than $BB00
bcs L4E1E since it would wipe out globals...
sta ZP.DataPtr+1
dey
lda (ZP.A3L),y low address should be zero !
sta ZP.DataPtr
bne L4E1E error if not page boundary.
inx add 4 pages for 1k buffer.
inx
inx
inx
L4DED dex test for conflicts.
jsr XDOS.X2MemTablYA test for free buffer space
and GP.MEMTABL,y
bne L4E1E report memory conflict, if any.
cpx ZP.DataPtr+1 test all 4 pages.
bne L4DED
inx add 4 pages again for allocation.
inx
inx
inx
L4DFE dex set proper bits to 1
jsr XDOS.MemTablEOR
cpx ZP.DataPtr+1 set all 4 pages
bne L4DFE
ldy XDOS.FCBPtr calculate buffer number
lda XDOS.FCBs,y
asl buffer number = (entnum) * 2.
sta XDOS.FCBs+FCB.BUFID,y save it in fcb.
tax use entnum * 2 as index to global
lda ZP.DataPtr+1 buffer addr tables. get addr already
sta GP.BUFTABL-1,x validated as good. store hi addr
clc (entnums start at 1, not 0)
rts
L4E1E lda #MLI.E.BADBUF buffer is in use or not legal
sec
rts
*--------------------------------------
relbuffr tax index into global buffer table.
lda GP.BUFTABL-2,x
sta XDOS.BufAddr
lda GP.BUFTABL-1,x
sta XDOS.BufAddr+1
beq relbuffr.8 branch if unallocated buffer space.
stz GP.BUFTABL-1,x take address out of buffer list.
stz GP.BUFTABL-2,x (x was set up by getbufadr)
freebuf ldx XDOS.BufAddr+1 get hi buffer address
inx add 4 pages to account for 1k space.
inx
inx
inx
.1 dex drop to next lower page.
jsr XDOS.MemTablEOR
cpx XDOS.BufAddr+1 all pages freed ?
bne .1 no.
relbuffr.8 clc no error.
rts
*--------------------------------------
valdbuf lda ZP.UserBuf+1 high address of user's buffer
cmp #$02 must be greater than page 2.
bcc L4E1E report bad buffer
ldx cbytes+1
lda cbytes get cbytes-1 value.
sbc #$01 (carry is set)
bcs L4E76
dex
L4E76 clc
adc ZP.UserBuf calculate end of request address.
txa do high address.
adc ZP.UserBuf+1 the final address
tax must be less than $BFnn (globals)
cpx #$BF
bcs L4E1E report bad buffer.
inx loop thru all affected pages.
vldbuf1 dex check next lower page.
jsr XDOS.X2MemTabLYA
and GP.MEMTABL,y if 0 then no conflict.
bne L4E1E branch if conflict.
cpx ZP.UserBuf+1 was that the last (lowest) page ?
bne vldbuf1 if not.
clc all pages ok.
rts
*--------------------------------------
* calculate memory allocation bit position.
* on entry: x = high address of buffer, low address assumed zero.
* on exit: acc = allocation bit mask, x = unchanged, y = pointer to memtabl byte
*--------------------------------------
XDOS.MemTablEOR jsr XDOS.X2MemTablYA
eor GP.MEMTABL,y
sta GP.MEMTABL,y
rts
*--------------------------------------
XDOS.X2MemTablYA
txa page address
and #$07 which page in any 2k set ?
tay use as index to determine
lda whichbit,y bit position representation.
pha save bit position mask for now.
txa page address.
lsr
lsr determine 2k set
lsr
tay return it in y.
pla restore bit mask. return bit position
rts in a & y, pointer to memtabl in x.
*--------------------------------------
XDOS.GetBuf ldy #$02 give user address of file buffer referenced by refnum.
lda XDOS.BufAddr
sta (ZP.A3L),y
iny
lda XDOS.BufAddr+1
sta (ZP.A3L),y
clc no errors possible
rts
*--------------------------------------
XDOS.SetBuf ldy #$03
jsr alcbufr1 allocate new buffer address over old one
bcs L4EC7 report any errors immediately
lda XDOS.BufAddr+1
sta ZP.UserBuf+1
lda XDOS.BufAddr
sta ZP.UserBuf
jsr freebuf free address space of old buffer
ldy #$00
ldx #$03
.1 lda (ZP.UserBuf),y move all 4 pages of the buffer to
sta (ZP.DataPtr),y new location.
iny
bne .1
inc ZP.DataPtr+1
inc ZP.UserBuf+1
dex
bpl .1
XDOS.SetBuf.CLCRTS
clc no errors
L4EC7 rts
*--------------------------------------
XDOS.IsValidChar
cmp #'0'
bcc XDOS.IsValidFirstChar
cmp #'9'+1
bcc XDOS.IsValidFirstChar.RTS
XDOS.IsValidFirstChar
.DO ENHFILENAME=1
cmp #'.'
beq XDOS.SetBuf.CLCRTS
cmp #'_'
beq XDOS.SetBuf.CLCRTS
.FIN
cmp #'A'
bcc XDOS.IsValidFirstChar.SEC
cmp #'Z'+1
.DO LOWERCASE=1
bcc XDOS.IsValidFirstChar.RTS
cmp #'a'
bcc XDOS.IsValidFirstChar.SEC
cmp #'z'+1
.FIN
XDOS.IsValidFirstChar.RTS
rts
XDOS.IsValidFirstChar.SEC
sec
rts
*--------------------------------------
* move 3 pages of dispatcher from LC Bank2 $D100 to $1000
* this move routine must be resident above $E000 at all times
*--------------------------------------
XDOS.CallDisp .DO M.SEL
lda IO.RRAMWRAMBNK2 read/write RAM bank 2
lda IO.RRAMWRAMBNK2
stz ZP.A1L
lda #$D1
sta ZP.A1L+1
stz ZP.A2L
lda #$10
sta ZP.A2L+1
ldy #$00
ldx #$03 3 pages to move.
.1 lda (ZP.A1L),y
sta (ZP.A2L),y
iny
bne .1
inc ZP.A1L+1 pointers to next page
inc ZP.A2L+1
dex move all pages needed
bne .1
lda IO.RRAMWRAMBNK1 read/write RAM bank 1
lda IO.RRAMWRAMBNK1 swap mli space back in
stz GP.MLIACTV MLI active flag
stz ROM.SOFTEV
lda #$10 point RESET to dispatch entry
sta ROM.SOFTEV+1
eor #$A5
sta ROM.PWREDUP power up byte
.DO AUXLC=1
jmp GP.SELJMP
.ELSE
jmp $1000
.FIN
.ELSE
inc ROM.PWREDUP
lda /ROM.RESETV-1
pha
lda #ROM.RESETV-1
pha
jmp IRQ.ToRomRTS
.FIN
*--------------------------------------
XDOS.SPREMAP ldx #$03 assume 3 parameters.
lda ZP.CMDNUM
sta .5
bne .1 taken if not status call
ldy #XDOS.SPStatusBuf set up memory for the status list buffer
sty ZP.BUFPTR fake up the prodos parameters
ldy /XDOS.SPStatusBuf
sty ZP.BUFPTR+1
stz ZP.BLKNUM set statcode = 0 for simple status call
.1 cmp #$03 format command ?
bne .2 no.
ldx #$01 format has only 1 parameter.
.2 stx XDOS.SPParams set # of parms.
lda ZP.UNITNUM DSSS0000
lsr turn unit number into an index
lsr
lsr
lsr
tax range = 1-15
lda XDOS.SPUnit-1,x get the smartport unit number and
sta XDOS.SPParams.U store into smartport parm list.
lda XDOS.SPVectLo-1,x
sta .4+1 copy smartport entry address
lda XDOS.SPVectHi-1,x
sta .4+2
ldx #$04 copy buffer pointer and block #
.3 lda ZP.BUFPTR-1,x from prodos parameters
sta XDOS.SPParams.B-1,x to smartport parameter block
dex
bne .3
.4 jsr $0000 smartport call (entry address gets modified)
.5 .HS 00 command #
.DA XDOS.SPParams
bcs .9
ldx .5 status call ?
bne .9 no...
ldx XDOS.SPStatusBuf+1 else get the block count
ldy XDOS.SPStatusBuf+2
lda XDOS.SPStatusBuf get the returned status.
bit #$10 is there a disk present ?
beq .8
and #$44 mask all but write allowed and write
eor #$40 protected bits. if allowed and not
* clc
beq .9 protected, exit with carry clear
lda #MLI.E.WRTPROT else return write protected error.
.HS 2C BIT ABS
.8 lda #MLI.E.OFFLINE return offline error.
sec
.9 rts
*--------------------------------------
XDOS.TBX bit IO.RRAMWRAMBNK1 Get RW access to LC
.DO AUXLC=1
stx .1+1
tsx
stx $100
ldx $101
txs
.1 ldx #$FF SELF MODIFIED
jsr .2
tsx
stx $101
ldx $100
txs
jmp GP.TBXEXIT
.ELSE
jsr .2
jmp IRQ.ToRomRTS
.FIN
.2 cpx #TBX.EnumNext
beq XDOS.TBX.EnumNext
bcc XDOS.TBX.EnumBlk
*--------------------------------------
XDOS.TBX.MemReset
ldx #$17
.1 stz GP.MEMTABL,x P8 memory bitmap
dex
bne .1
inc GP.MEMTABL+$17 protect global page
lda #$CF protect zero page, stack and page 1
sta GP.MEMTABL
rts
*--------------------------------------
XDOS.TBX.EnumBlk
jsr XDOS.ZPT.InitA
ldx XDOS.DH.EPB
lda (zpt)
cmp #$E0
bcc .2
ldy #$1F+3
ldx #3
.1 lda (zpt),y
sta XDOS.DH.EL,x
dey
dex
bpl .1
jsr XDOS.ZPT.Next skip header
ldx XDOS.DH.EPB
dex skip header
.2 stx cntent
XDOS.TBX.CheckFCnt
lda XDOS.DH.FileCnt
ora XDOS.DH.FileCnt+1
beq XDOS.TBX.SECRTS
clc
rts
*--------------------------------------
XDOS.TBX.EnumNext
sty sos
sta sos+1
jsr XDOS.TBX.CheckFCnt
bcs .9
.1 dec cntent
bmi XDOS.TBX.SECRTS
lda (zpt)
and #$0F
beq .7
sta (sos)
pha
jsr XDOS.ZPT.Unpack
ply
.2 lda (zpt),y
sta (sos),y
dey
bne .2
ldy #16 FileType
lda (zpt),y
pha
jsr XDOS.ZPT.Next
jsr XDOS.DH.DecFileCnt
pla
* clc
.9 rts
.7 jsr XDOS.ZPT.Next
bra .1
*--------------------------------------
XDOS.TBX.SECRTS sec
rts
*--------------------------------------
XDOS.ZPT.InitGBuf
lda /XDOS.GBuf
XDOS.ZPT.InitA sta zpt+1
lda #4
sta zpt
rts
*--------------------------------------
XDOS.ZPT.Unpack ldy #$1D MIN_VERSION
lda (zpt),y
bpl .6 no lowercase information
lda (zpt)
and #$0F
beq .6 length=0
tay
.2 cpy #8 CS if MIN_VERSION to use
phy
bcs .3
ldy #$1D MIN_VERSION
lda (zpt),y
ply
and whichbit,y
beq .5
bra .4
.3 ldy #$1C VERSION
lda (zpt),y
ply
and whichbit-8,y
beq .5
.4 lda (zpt),y
eor #$20 to lowercase
sta (zpt),y
.5 dey
bne .2
.6 rts
*--------------------------------------
XDOS.ZPT.Next lda XDOS.DH.EL
XDOS.ZPT.NextA clc
adc zpt
sta zpt
bcc .8
inc zpt+1
clc
.8 rts
*--------------------------------------
XDOS.DH.DecFileCnt
lda XDOS.DH.FileCnt
bne .1
dec XDOS.DH.FileCnt+1
.1 dec XDOS.DH.FileCnt
rts
*--------------------------------------
* data tables
*--------------------------------------
XDOS.CmdNums .HS D3D4D5D6 table of valid mli command numbers.
.HS 40410000
.HS 808182
.HS 65
.HS C0C1C2C3C4C5C6C7C8C9CACBCCCDCECF
.HS 00
.HS D0D1D2
XDOS.ParamCnt .HS 02020202 parameter counts for the calls
.HS 0201FFFF
.HS 030300
.HS 04
.HS 070102070A0201010303040401010202
.HS FF
.HS 020202
XDOS.CmdFlags .HS A0A1A2
.HS A384
.HS 050607
.HS 88494A4B
.HS 2C2D
.HS 4E4F
.HS 50515253
.HS 94959697
XDOS.CmdJmps .DA XDOS.Create
.DA XDOS.Destroy
.DA XDOS.Rename
.DA XDOS.SetFileInfo
.DA XDOS.GetFileInfo
.DA XDOS.Online
.DA XDOS.SetPrefix
.DA XDOS.GetPrefix
.DA XDOS.Open
.DA XDOS.NewLine
.DA XDOS.Read
.DA XDOS.Write
.DA XDOS.Close
.DA XDOS.Flush
.DA XDOS.SetMark
.DA XDOS.GetMark
.DA XDOS.SetEOF
.DA XDOS.GetEOF
.DA XDOS.SetBuf
.DA XDOS.GetBuf
.DA XDOS.SetFileInfoEx
.DA XDOS.GetFileInfoEx
.DA XDOS.ACL
dinctbl .HS 0100000200 table to increment directory usage/eof counts
.DO LOWERCASE=1
XDOS.VolHdrDef .HS C3270D
XDOS.VolHdrDef.Cnt .EQ *-XDOS.VolHdrDef
.ELSE
pass .HS 75
xdosver .HS 00
compat .HS 00
.HS C3270D000000
.FIN
rootstuf .HS 0F.0200.0400.000800
whichbit .HS 8040201008040201
XDOS.DE2FCB .DA #FCB.1stBLK+0
.DA #FCB.1stBLK+1
.DA #FCB.UBLK+0
.DA #FCB.UBLK+1
.DA #FCB.EOF+0
.DA #FCB.EOF+1
.DA #FCB.EOF+2
XDOS.DE2FINFO .HS 1E.10.1F.20.80.93.94.21.22.23.24.18.19.1A.1B
XDOS.SysErrMsg .AS -"SYS ERR-$0"
XDOS.SysErrMsgL .EQ *-XDOS.SysErr
*--------------------------------------
XDOS.DATA .DUMMY
*--------------------------------------
XDOS.OH.Blk .HS 0000
XDOS.OH.EIB .HS 00
XDOS.OH.EL .HS 00
*--------------------------------------
.DO ACL=1
XDOS.DH.ACL .BS 8 5700 UID GID MOD
.FIN
XDOS.DH.CTime .HS 00000000 directory creation time
.HS 0000 Version/MVersion
XDOS.DH.Access .HS 00 attributes (protect bit, etc.)
XDOS.DH.EL .HS 00 length of each entry in this directory
XDOS.DH.EPB .HS 00 maximum number of entries per block
XDOS.DH.FileCnt .HS 0000 current # of files in this directory
XDOS.DH.BMPtr .HS 0000 address of first allocation bitmap
XDOS.DH.BlkCnt .HS 0000 total number of blocks on this unit
*--------------------------------------
XDOS.DE.DevID .HS 00 device number of this directory entry
XDOS.DE.DirHBlk .HS 0000 address of <sub> directory header
XDOS.DE.DirEBlk .HS 0000 address of block which contains entry
XDOS.DE.DirEIB .HS 00 entry number within block
*--------------------------------------
XDOS.DE.Filename .BS 16
XDOS.DE.Type .HS 00
XDOS.DE.KeyPtr .HS 0000 first block of file
XDOS.DE.BlkUsed .HS 0000 # of blocks allocated to this file
XDOS.DE.EOF .HS 000000 current end of file marker
XDOS.DE.CTime .HS 00000000 file creation time
XDOS.DE.Version .HS 00 version that created this file
XDOS.DE.MVersion .HS 00
XDOS.DE.Access .HS 00 attributes (protect, r/w, enable, etc.)
XDOS.DE.AuxType .HS 0000 user auxilliary identification
XDOS.DE.MTime .HS 00000000 file's last modification time
XDOS.DE.BlkPtr .HS 0000 file directory header block address
*--------------------------------------
scrtch .HS 00000000 scratch area for allocation address conversion.
oldeof .HS 000000 temp used in r/w
oldmark .HS 000000
*xvcbptr .HS 00 used in 'cmpvcb' as a temp
*XDOS.VCBPtr .HS 00
XDOS.FCBPtr .HS 00
fcbflg .HS 00
reql .HS 00
reqh .HS 00
levels .HS 00
totent .HS 00
XDOS.FileCnt .HS 0000
cntent .HS 00
nofree .HS 00
*bmcnt .HS 00
*saptr .HS 00
pathcnt .HS 00
*p_dev .HS 00
p_blok .HS 0000
*bmptr .HS 00
*basval .HS 00
half .HS 00
* bitmap info tables
XDOS.BM.Status .HS 00
XDOS.BM.DevID .HS 00
XDOS.BM.BlkNum .HS 0000
XDOS.BM.Idx .HS 00
XDOS.TmpPos .HS 000000
rwreql .HS 00
rwreqh .HS 00
nlchar .HS 00
nlmask .HS 00
ioaccess .HS 00 has a call been made to disk device handler ?
cmdtemp .HS 00
bkbitflg .HS 00 used to set or clear backup bit
* xdos temporary variables
namcnt .HS 00
rnptr .HS 00
namptr .HS 00
*vnptr .HS 00
prfxflg .HS 00
cferr .HS 00
* deallocation temporary variables
XDOS.1stBLK .HS 0000
stortyp .HS 00
*--------------------------------------
deblock .HS 0000
dtree .HS 00
dsap .HS 00
dseed .HS 0000
*--------------------------------------
topdest .HS 00
dtmpx .HS 00
loklst .EQ * look list of recognized device numbers
dealbufl .HS 0000000000000000
dealbufh .HS 0000000000000000
cbytes .HS 0000
.HS 00 cbytes+2 must = 0
XDOS.BufAddr .HS 0000
delflag .HS 00 used by 'detree' to know if called from delete (destroy).
*--------------------------------------
* variables used by SP remap & XRW Disk ][ to store last track used
*--------------------------------------
XRW.D2Trk .EQ *
XDOS.SPUnit .HS 00000000000000 14+1 for S0D2
.HS 00
.HS 00000000000000
XRW.D2VolNum .EQ *
XDOS.SPVectLo .HS 00000000000000 storage for low byte of smartport entry.
.HS 00
.HS 00000000000000
XRW.D2SeekTime .EQ *
XDOS.SPVectHi .HS 00000000000000 storage for high byte of smartport entry.
.HS 00
.HS 00000000000000
*--------------------------------------
XDOS.SPParams .HS 00 # of parms
XDOS.SPParams.U .HS 00 unit number
XDOS.SPParams.B .HS 0000 data buffer
.HS 000000 block number (3 bytes)
XDOS.SPStatusBuf .HS 00000000
*--------------------------------------
.LIST ON
XDOS.DATA.LEN .EQ *-XDOS.DATA
XDOS.FREE .EQ $FEFD-*
.LIST OFF
.BS XDOS.FREE
.ED
*--------------------------------------
XDOS.CortDisp .EQ $FEFD
XDOS.CortFlag .EQ $FEFF cortland flag. 1 = Cortland system (must stay within page boundary)
*--------------------------------------
.EP
*--------------------------------------
XDOS.LEN .EQ *-XDOS.START
*--------------------------------------
MAN
SAVE usr/src/prodos.fx/prodos.s.xdos.f
LOAD usr/src/prodos.fx/prodos.s
ASM