A2osX/DRV/SSC.DRV.S.txt

204 lines
4.3 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

PR#3
PREFIX /A2OSX.SRC
NEW
INC 1
AUTO 6
.LIST OFF
.OP 65C02
.OR $2000
.TF /A2OSX.BOOT/DRV/SSC.DRV
*--------------------------------------
.INB /A2OSX.DEV/INC/MACROS.I
.INB /A2OSX.DEV/INC/A2OSX.I
.INB /A2OSX.DEV/INC/MLI.ERR.I
.INB /A2OSX.DEV/INC/COM.6551.I
*--------------------------------------
ZPTmpPtr1 .EQ ZPDRV
*--------------------------------------
* File Header (16 Bytes)
*--------------------------------------
CS.START cld
jmp Dev.Detect cld,jmp abs=DRV
.DA #$61 6502,Level 1 (65c02)
.DA #1 DRV Layout Version 1
.DA 0
.DA CS.END-CS.START Code Length
.DA DEV.HEADER-CS.START Device Header Offset
.DA DRV.CS.START-CS.START Driver Code Offset
.DA DRV.CS.END-DRV.CS.START Drv Code Length
*--------------------------------------
* Relocation Table
*--------------------------------------
L.MSG.DETECT .DA MSG.DETECT
L.MSG.DETECT.OK .DA MSG.DETECT.OK
L.MSG.DETECT.KO .DA MSG.DETECT.KO
L.DEV.HEADER.NAME .DA DEV.HEADER.NAME
.DA 0 End Of Reloc Table
*--------------------------------------
Dev.Detect sta hArgs
>LDYA L.MSG.DETECT
>SYSCALL CPrintFYA
stz ZPTmpPtr1
lda #$C1
sta ZPTmpPtr1+1
.1 ldx #DEVSIG.Length-1
.2 ldy DEVSIG.Offset,x
lda (ZPTmpPtr1),y
cmp DEVSIG.Value,x
bne .3
dex
bpl .2
bra .4
.3 inc ZPTmpPtr1+1 no match, try next slot....
lda ZPTmpPtr1+1
cmp #$C8
bne .1
>LDYA L.MSG.DETECT.KO
>SYSCALL CPrintFYA
lda #MLI.ERR.NODEV Not Found in any slot, exiting
sec
rts
.4 lda ZPTmpPtr1+1
and #$0F
ora #$30
sta DEV.HEADER.NAME+4
asl
asl
asl
asl
sta DEVSLOTn0
>PUSHW L.DEV.HEADER.NAME
>LDYA L.MSG.DETECT.OK
>SYSCALL CPrintFYA
clc
rts
*--------------------------------------
CS.END
DEVSIG.Offset .HS 05070B0C
DEVSIG.Value .HS 38180131
DEVSIG.Length .EQ DEVSIG.Value-DEVSIG.Offset
MSG.DETECT >CSTR "Apple SSC (Super Serial Card,//c Serial Port) Driver.\r\n"
MSG.DETECT.OK >CSTR "SSC Installed As Device : %S\r\n"
MSG.DETECT.KO >CSTR "No SSC Found.\r\n"
hArgs .BS 1
*--------------------------------------
* Device Header (16 Bytes)
*--------------------------------------
DEV.HEADER cld
jmp (DRV.CS.START,x)
.DA #S.DEV.S.WRITE+S.DEV.S.READ
.BS 6
DEV.HEADER.NAME >PSTR "COM1" NAME
*--------------------------------------
* Driver Code
*--------------------------------------
DRV.CS.START .DA STATUS
.DA BADCALL
.DA BADCALL
.DA BADCALL
.DA CONTROL
.DA BADCALL
.DA OPEN
.DA CLOSE
.DA READ
.DA WRITE
L.STAT .DA STAT
.DA 0 end or relocation
*--------------------------------------
BADCALL lda #MLI.ERR.BADCALL
sec
rts
*--------------------------------------
STATUS >LDYA L.STAT
clc
rts
*--------------------------------------
CONTROL clc
rts
*--------------------------------------
OPEN ldx DEVSLOTn0
php
sei
stz SSC.RESET,x
lda #$1E
sta SSC.CTL,x
ldx DEVSLOTn0
lda #SSC.CMD.RIRQDIS
sta SSC.CMD,x
lda SSC.STATUS,x clear any IRQ pending
bmi *
plp
clc
rts
*--------------------------------------
CLOSE php
sei
ldx DEVSLOTn0
stz SSC.RESET,x
plp
clc
rts
*--------------------------------------
READ ldx DEVSLOTn0
lda SSC.STATUS,x
bmi *
and #SSC.STATUS.RDRF incoming char?
beq .9
lda SSC.DATA,x
clc
rts
.9 lda #0
sec
rts
*--------------------------------------
WRITE pha
ldx DEVSLOTn0
.1 lda SSC.STATUS,x
* and #SSC.STATUS.DCD+SSC.STATUS.DSR
* beq .9
and #SSC.STATUS.TDRE Outgoing char?
beq .1
pla
sta SSC.DATA,x
clc
rts
.9 pla
sec
rts
*--------------------------------------
DRV.CS.END
DEVSLOTn0 .BS 1
*--------------------------------------
STAT .DA #S.DEVSTAT.S.WRITE+S.DEVSTAT.S.READ
.DA #0,#0,#0
>PSTR "Serial Card/Port"
.DA #S.DEVSTAT.TYPE.CHAR
.DA #0
.DA $0900
*--------------------------------------
MAN
SAVE DRV/SSC.DRV.S
ASM