Apple-2-SW/A2osX
1
0
Fork 0
mirror of https://github.com/A2osX/A2osX.git synced 2024-11-22 16:31:07 +00:00
Code Issues Projects Releases Wiki Activity
3e82fe7a07
A2osX/ProDOS.FX/ProDOS.S.XDOS.A.txt

1145 lines
28 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

NEW
AUTO 3,1
*--------------------------------------
XDOS cld no decimal.
sty mliy save x and y
stx mlix
ply get processor status
pla find out the address of the caller
sta A3L
clc preserve the address of the call spec.
adc #$04
sta mliretn last MLI call return address
pla
sta A3L+1
adc #$00
sta mliretn+1
phy pull processor status
plp to re-enable interrupts.
cld still no decimal
stz p8error clear any previous errors.
ldy #$01 find out if command is valid.
lda (A3L),y get command #
lsr and hash it to a range of 0-$1F
lsr
lsr
lsr
clc
adc (A3L),y
and #$1F
tax
lda (A3L),y check result to see if valid command #
cmp XDOS.CmdNums,x
bne scnerr
iny index to call spec parm list.
lda (A3L),y make A3L point to parameter count byte
pha in parameter block.
iny
lda (A3L),y
sta A3L+1
pla
sta A3L
lda XDOS.ParamCnt,x make sure parameter list has the correct # of parameters.
beq goclock clock has 0 parameters.
cmp (A3L)
bne scperr error if wrong count.
lda XDOS.CmdNums,x get call # again
cmp #MLIQUIT is it quit?
beq special if so, then call quit dispatcher
asl carry set if bfm or dev mgr
bpl godevmgr
bcs gobfmgr
lsr shift back down for interrupt manager
and #$03 valid calls are 0 and 1
jsr XDOS.intmgr
bra exitmli
special jmp jspare P8 system death vector
goclock jsr clockv go read clock.
bra exitmli no errors possible
godevmgr lsr shift back down for device manager.
adc #$01 valid commands are 1 and 2.
sta A4L save command #.
jsr XDOS.devmgr execute read or write request.
bra exitmli
gobfmgr lsr shift back down for block file manager.
and #$1F valid commands are 0-$13
tax
jsr XDOS.bfmgr
exitmli stz bubit clear backup bit
ldy p8error P8 error code
cpy #$01 if > 0 then set carry
tya and set z flag.
php disable interrupts until exit complete.
sei
lsr mliact indicate MLI done.
plx save status register until return.
lda mliretn+1 place last MLI call return address
pha on stack. return is done via 'rti'
lda mliretn so the status register is restored
pha at the same time, so
phx place status back on stack
tya return error, if any.
ldx mlix MLI X register savearea
ldy mliy MLI Y register savearea
pha
lda bnkbyt1 restore language card status
jmp GP.MLIEXIT and return.
nodevice lda #MLI.E.NODEV no device connected.
jsr GP.P8errv
scnerr lda #MLI.E.BADCALL
.HS 2C BIT ABS
scperr lda #MLI.E.BADCNT
jsr gosyserr
bra exitmli
*--------------------------------------
* ProDOS Device Manager
*--------------------------------------
XDOS.devmgr ldy #$05 the call spec for devices must
.1 lda (A3L),y be passed to drivers in page zero:
sta A4L,y
dey
bne .1
ldx buf+1 buffer page
stx usrbuf+1 to user buffer
inx
inx
lda buf is buffer page aligned (nn00) ?
beq .2 branch if it is
inx else account for 3-page straddle
.2 jsr vldbuf1 make sure user buffer is not
bcs gosyserr conflicting with protected ram.
jsr XDOS.DevCall call internal entry for device dispatch
bcc XDOS.DevCall.RTS
gosyserr jsr GP.P8errv
*--------------------------------------
XDOS.DevCall php do not allow interrupts.
sei
lda unitnum get device # and
and #$F0 strip misc lower nibble
sta unitnum then save it.
lsr use as index to device table
lsr
lsr
tax
jsr XDOS.DevCall.Jmp
bit CLRC8ROM RELEASE $C800-$CFFF ROM space
bcs .9
plp
clc
rts
.9 plp
sec
XDOS.DevCall.RTS
rts
XDOS.DevCall.Jmp
jmp (DEVPTRS,x) goto driver (or error if no driver)
*--------------------------------------
* ProDOS interrupt manager
*--------------------------------------
XDOS.intmgr sta A4L interrupt command
lsr allocate interrupt or deallocate?
bcs dealcint branch if deallocate.
ldx #$03 test for a free interrupt space in tbl.
.1 lda GP.IRQVs-2,x test high address for 0.
bne .2 branch if spot occupied.
ldy #$03 get address of routine.
lda (A3L),y must not be zero page.
beq badint error if it is.
sta GP.IRQVs-2,x save high address
dey
lda (A3L),y
sta GP.IRQVs-3,x and low address.
txa return interrupt # in range 1-4
lsr
dey
sta (A3L),y pass back to user.
clc no errors.
rts
.2 inx
inx next lower priority spot
cpx #$0B are all 4 already allocated?
bne .1 branch if not.
lda #MLI.E.IRQFULL interrupt table full
.HS 2C BIT ABS
badint lda #MLI.E.INVPARAM invalid parameter.
jsr GP.P8errv
dealcint ldy #$01 zero out interrupt vector
lda (A3L),y but make sure it is a valid #.
beq badint error if < 1
cmp #$05 or > 4
bcs badint
asl
tax
stz GP.IRQVs-2,x
stz GP.IRQVs-1,x
clc
rts
*--------------------------------------
XDOS.syserr sta p8error P8 error code
plx
plx pop 1 level of return
sec
rts
*--------------------------------------
XDOS.SysDeath tax death error code.
sta CLR80DISP disable 80 col hardware.
lda SETTEXT switch in text.
lda cortflag is this a Cortland?
beq .1 if not, don't use super hires switch.
stz newvideo force off super hires.
.1 lda CLRPAGE2 switch in text page 1.
ldy #deathmsg.LEN-1
.2 lda deathmsg,y
sta $400,y 'RESTART SYSTEM-$'
dey
bpl .2
txa x = death error code
and #$0F convert to ascii
ora #$30
cmp #$3A
bcc .3 branch if not > 9.
adc #$06 inc to alpha a-f
.3 ldy #deathmsg.LEN
ora #$80
sta $400,y
lda #" "
.4 iny
sta $400,y
cpy #39
bne .4
bra *
*--------------------------------------
* ProDOS Block File Manager
*--------------------------------------
XDOS.bfmgr lda XDOS.CmdFlags,x translate into command address.
asl bit 7 indicates pathname to process
sta cmdtemp
and #$3F bit 6 is refnum, 5 is time to process
tax
lda cmdtable,x move address to indirect jump
sta H3274+1
lda cmdtable+1,x high byte
sta H3274+2
lda #$20 init backup bit flag
sta bkbitflg to say 'file modified'
bcc nopath
jsr XDOS.GetPath process pathname before calling command
bcs errorsys branch if bad name.
nopath asl cmdtemp test for refnum processing
bcc nopreref
jsr XDOS.GetFCB set pointers to fcb and vcb of file
bcs errorsys
nopreref asl cmdtemp check for necessity of time stamp
bcc H3274
jsr clockv date/time
H3274 jsr $FFFF SELF MODIFIED : execute command
bcc goodop
errorsys jsr GP.P8errv
goodop rts
*--------------------------------------
* entry used by rename for 2nd pathname.
*--------------------------------------
XDOS.GetRenPath ldy #$03 get address to new pathname
.HS 2C
*--------------------------------------
XDOS.GetPath ldy #$01 index to pathname pointer
lda (A3L),y low pointer address
sta zpt
iny
lda (A3L),y hi pointer address
sta zpt+1
ldx #$00 x = index to pathbuf
ldy #$00 y = index to input pathname.
stz prfxflg assume prefix is in use.
stz pathbuf mark pathbuf = nothing processed.
lda (zpt),y validate pathname length > 0 and < 65
beq errsyn
cmp #$41
bcs errsyn
sta pathcnt this is used to compare for
inc pathcnt end of pathname processing.
iny now check for full pathname...
lda (zpt),y (full name if starts with '/')
and #$7F
cmp #'/'
bne H32AD branch if prefix appended.
dec prfxflg set prefix flag = prefix not used.
iny index to 1st character of pathname.
H32AD lda #$FF set current position of pathbuf
sta pathbuf,x to indicate end of pathname.
sta namcnt $FF = no chars processed in local name.
stx namptr pointer to local name length byte.
H32B8 cpy pathcnt done with pathname processing?
bcs endpath
lda (zpt),y get character
and #$7F
inx prepare for next char
iny
cmp #'/' is it delimiter '/' ?
beq endname yes
.DO LOWERCASE=0
cmp #'a' lowercase?
bcc .1 no
and #$5F shift to uppercase
.1 .FIN
sta pathbuf,x store char
inc namcnt is it the 1st char of a local name?
bne .2 no
inc namcnt increment to 1
jsr XDOS.IsValidFirstChar
bcc H32B8
bra errsyn
.2 jsr XDOS.IsValidChar
bcc H32B8
errsyn lda #MLI.E.INVPATH
sec
rts
endpath lda #$00 end pathname with a 0
bit namcnt also make sure count is positive
bpl H32FD
sta namcnt
dex
H32FD inx
sta pathbuf,x
beq errsyn error if '/' only.
stx pathcnt save length of pathname
tax
endname lda namcnt validate local name < 16
cmp #16
bcs errsyn
phx save pointer
ldx namptr get index to beginning of local name
sta pathbuf,x save local name's length
plx restore pointer
bne H32AD branch if more names to process
clc probably no error, but
lda prfxflg make sure all pathnames are prefixed
bne H3323 or begin with a '/'.
lda newpfxptr must be non-zero
beq errsyn
H3323 rts
*--------------------------------------
XDOS.SetPrefix jsr XDOS.GetPath call is made to detect if a null path.
bcc H3333 path ok.
ldy pathbuf is it a null pathname?
bne pfxerr error if not
sty newpfxptr fix appletalk PFI bug
sty preflag prefix flag
clc no error
rts
H3333 jsr XDOS.FindFileOrVol go find specified prefix directory.
bcs pfxerr branch if error is not root directory.
H333C lda d_stor make sure last local name is dir type
and #$D0 (either root or sub).
eor #$D0 directory?
bne ptyperr wrong type
ldy prfxflg new or appended prefix?
bne H334D
lda newpfxptr append new prefix to old
H334D tay
sec find new beginning of prefix
sbc pathcnt
cmp #$C0 too long?
bcc errsyn then error
tax
sta newpfxptr
sta preflag
lda d_dev save device #
sta p_dev
lda d_frst and address of 1st block
sta p_blok
lda d_frst+1
sta p_blok+1
.1 lda pathbuf,y
sta pathbuf,x
iny
inx
bne .1
clc good prefix
rts
ptyperr lda #MLI.E.UNSUPST filetype error (not a directory)
pfxerr sec
rts
*--------------------------------------
XDOS.GetPrefix clc calc how big a buffer is needed.
ldy #$01 get index to users pathname buffer
lda (A3L),y
sta usrbuf user buffer ptr
iny
lda (A3L),y
sta usrbuf+1
stz cbytes+1 set buffer length at 64 char max
lda #$40
sta cbytes
jsr valdbuf go validate prefix buffer address
bcs pfxerr
ldy #$00 y = indirect index to user buffer.
lda newpfxptr get address of beginning of prefix
tax
beq nulprfx if null prefix.
eor #$FF get total length of prefix
adc #$02 add 2 for leading and trailing slashes.
nulprfx sta (usrbuf),y store length in user's buffer.
beq gotprfx branch if null prefix.
sendprfx iny inc to next user buffer location.
lda pathbuf,x get next char of prefix.
sndlimit sta (usrbuf),y give char to user.
and #$F0 check for length descriptor.
bne H33B3 branch if regular character
lda #'/' otherwise, substitute a slash.
bne sndlimit branch always
H33B3 inx
bne sendprfx branch if more to send.
iny
lda #'/' end with '/'
sta (usrbuf),y
gotprfx clc no error
rts
*--------------------------------------
XDOS.GetFCB ldy #$01 index to ref#
lda (A3L),y is it a valid file# ?
beq badref must not be 0.
cmp #FCB.MAX+1
bcs badref
pha
dec
lsr
ror
ror
ror multiply by 32.
sta fcbptr used as an index to fcb
tax
pla restore ref# in acc
cmp FCBs+FCB.ID,x
bne errnoref
*--------------------------------------
XDOS.GetFCBBufX lda FCBs+FCB.BUFID,x get page address of file buffer.
tay index into global buffer table.
lda buftbl-1,y
sta bufaddrh
beq fcbdead fcb corrupted
sta datptr+1 save ptr to data area of buffer
inc
inc index block always 2 pages after data
sta zpt+1
lda buftbl-2,y ???? ALWAYS 0
sta bufaddrl
sta datptr index and data buffers always on
sta zpt page boundaries.
jsr XDOS.FCBDevIDSelect
lda #VCB0
fndfvol tay search for associated vcb
lda VCBs+VCB.DEV,y
cmp FCBs+FCB.DEVID,x is this vcb the same device?
beq tstvopen if it is, make sure volume is active.
nxtfvol tya adjust index to next vcb.
clc
adc #VCB
bcc fndfvol loop until volume found.
lda #$0A open file has no volume so
.HS 2C BIT ABS
fcbdead lda #$0B fcb error so
jsr GP.SysDeath kill the system.
tstvopen lda VCBs,y make sure this vcb is open.
beq nxtfvol branch if it is not active.
sty vcbptr save ptr to good vcb.
clc no error
rts Y = VCBPtr, X = FCBPtr
errnoref stz FCBs,x
badref lda #MLI.E.BADREF requested refnum is
sec illegal (out of range)
rts
*--------------------------------------
XDOS.Online jsr mvdbufr figure out how big buffer has to be.
stz cbytes set this for valdbuf routine.
stz cbytes+1
ldy #$01
lda (A3L),y if 0 then cbytes=$100 else $010 for one
and #$F0 device. mask out unused nibble.
sta devnum last device used.
beq .1 branch if all devices.
lda #$10 cbytes = $010
sta cbytes
bne .2 always taken
.1 inc cbytes+1 cbytes = $100
.2 jsr valdbuf go validate buffer range against
bcs .9 allocated memory.
lda #$00 zero out user buffer space
ldy cbytes
.3 dey
sta (usrbuf),y
bne .3
sta namptr used as pointer to user buffer.
lda devnum get device # again.
bne online1 branch if only 1 device to process.
jsr mvdevnums get list of currently recognized dev's.
.4 phx save index to last item on list
lda loklst,x
sta devnum save desired device to look at.
jsr online1 log this volume and return it's name.
lda namptr inc pointer for next device
clc
adc #$10
sta namptr
plx get index to device list.
dex next device.
bpl .4 branch if there is another device.
lda #$00 no errors for multiple on-line
clc
.9 rts
*--------------------------------------
online1 jsr XDOS.FindVCBForDevNum see if it has already been logged in.
bcs online1.ERR branch if vcb is full.
lda #$02
ldx #$00 read in root (volume) directory
jsr XDOS.ReadGBufAX read ROOT VOL into general purpose buffer.
bcc .1 branch if read was ok.
ldx vcbptr
ldy VCBs+VCB.OFCNT,x don't take the vcb offline if
bne online1.ERR there are active files present.
stz VCBs,x now take the volume offline
stz VCBs+VCB.DEV,x
bra online1.ERR branch if unable to read.
.1 .DO LOWERCASE=1
jsr XDOS.CheckAndUnpackGBuf
bcs online1.ERR
.FIN
ldx vcbptr
lda VCBs,x has it been logged in before?
beq .2 if not.
lda VCBs+VCB.OFCNT,x it has, are there active files?
bne .3 branch if volume is currently busy.
.2 jsr XDOS.VCBMountAtX
bcs online1.ERR branch if there is a problem.
lda #MLI.E.DUPVOL anticipate a duplicate active volume
bit duplflag exits.
bmi online1.ERR branch if so.
.3 ldx vcbptr
jsr XDOS.VCBCmpGBUF does vol read compare with logged vol?
lda #MLI.E.DSKSWIT anticipate wrong volume mounted.
bcc online1.OK branch if ok.
*--------------------------------------
online1.ERR pha save error code.
jsr svdevn report what device has problem.
pla error code.
iny tell what error was encountered.
sta (usrbuf),y
cmp #MLI.E.DUPVOL duplicate volume error?
bne .1 no.
iny report which other device has same name
ldx vcbentry
lda VCBs+VCB.DEV,x
sta (usrbuf),y
stz duplflag clear duplicate flag.
lda #MLI.E.DUPVOL duplicate volume error code.
.1 sec flag error
rts
*--------------------------------------
online1.OK lda VCBs,x get volume name count
sta namcnt
ldy namptr index to user's buffer.
.1 lda VCBs,x move name to user's buffer
sta (usrbuf),y
inx
iny
dec namcnt
bpl .1
svdevn ldy namptr index to 1st byte of this entry.
lda devnum upper nibble = device# and
ora (usrbuf),y lower nibble = name length.
sta (usrbuf),y
clc no errors
rts end of block file manager
*--------------------------------------
XDOS.Create jsr XDOS.CheckPath check for duplicate, get free entry
bcc duperr error code may be 'file not found'
tstfnf cmp #MLI.E.FNOTFND 'file not found' is ok
bne crerr1 otherwise exit with error.
ldy #$07 test for tree or directory file,
lda (A3L),y no other kinds are legal.
cmp #$04 is it seed, sapling or tree?
bcc tstdspc branch if it is
cmp #$0D
bne ctyperr report type error if not directory.
tstdspc lda devnum make sure destination device
jsr twrprot1 is not write protected.
bcs H351D
lda nofree is there space in directory to
beq xtndir add this file? branch if not
jmp creat1 otherwise, go create file.
xtndir lda own_blk before extending directory,
ora own_blk+1 make sure it's a subdirectory.
bne H352A
lda #MLI.E.DIRFULL otherwise, directory full error
.HS 2C BIT ABS
ctyperr lda #MLI.E.UNSUPST filetype error
.HS 2C BIT ABS
duperr lda #MLI.E.DUPFILE name already exists
crerr1 sec
H351D rts
H352A lda bloknml preserve disk address of current (last)
pha directory link, before allocating an
lda bloknml+1 extended block.
pha
jsr alc1blk allocate a block for extending directory
plx
stx bloknml+1 restore block addr of dir info in gbuf
plx
stx bloknml
bcs H351D unable to allocate.
sta gbuf+2 save block address in y,a to
sty gbuf+3 current directory.
.DO LOWERCASE=1
jsr XDOS.WriteGBufDir
.ELSE
jsr XDOS.WriteGBuf update directory block with new link.
.FIN
bcs H351D if error
ldx #$01
swpbloks lda bloknml,x prepare new directory block
sta gbuf,x using current block as back link
lda gbuf+2,x
sta bloknml,x and save new block as next to be written
dex
bpl swpbloks
inx x = 0
clrdir stz gbuf+2,x
stz gbuf+$100,x
inx
bne clrdir
.DO LOWERCASE=1
jsr XDOS.WriteGBufDir
.ELSE
jsr XDOS.WriteGBuf write prepared directory extension.
.FIN
bcs H351D if error
lda own_blk
ldx own_blk+1
.DO LOWERCASE=1
jsr XDOS.ReadGBufAXDir
.ELSE
jsr XDOS.ReadGBufAX read in parent directory block
.FIN
ldx own_ent and calc entry address.
lda /gbuf
sta zpt+1
lda #$04
ocalc clc
dex has entry address been calculated?
beq H3584 if yes.
adc own_len next entry address
bcc ocalc
inc zpt+1 entry must be in 2nd 256 bytes of block
bcs ocalc always taken.
H3584 sta zpt
ldy #$13 index to block count
H3588 lda (zpt),y
adc dinctbl-$13,y add 1 to block count and
sta (zpt),y
iny
tya $200 to the directory's eof.
eor #$18 done with usage/eof update?
bne H3588 branch if not.
.DO LOWERCASE=1
jsr XDOS.WriteGBufDir
.ELSE
jsr XDOS.WriteGBuf go update parent.
.FIN
bcs crerr2
jmp XDOS.Create
crerr2 rts return and report errors
*--------------------------------------
creat1 ldx #$00 zero out gbuf
H35A0 stz gbuf,x
stz gbuf+$100,x and data block of file.
inx
bne H35A0
ldy #$0B move user specified date/time
cmvtime lda (A3L),y to directory.
sta d_filid,y
txa if all 4 bytes of date/time = 0
ora (A3L),y then use built-in date/time.
tax
dey
cpy #$07
bne cmvtime
txa does user want default time?
bne cmvname if not.
ldx #$03
mvdftime lda p8date,x move current default date/time
sta d_credt,x
dex
bpl mvdftime
cmvname lda (A3L),y y = index to file kind.
cmp #$04
lda #$10 assume tree type
bcc csvfkind
lda #$D0 it's directory.
csvfkind ldx namptr index to local name of pathname.
ora pathbuf,x combine file kind with name length.
sta d_stor sos calls this 'storage type'.
and #$0F strip back to name length
tay and use as counter for move.
clc
adc namptr calc end of name
tax
crname lda pathbuf,x move local name as filename
sta d_stor,y
dex
dey
bne crname
ldy #$03 index to 'access' parameter
lda (A3L),y
sta d_attr
iny also move 'file identification'
lda (A3L),y
sta d_filid
cmvauxid iny move auxillary identification bytes
lda (A3L),y
sta d_auxid-5,y
cpy #$06
bne cmvauxid
.DO LOWERCASE=0
lda xdosver save current xdos version #
sta d_sosver
lda compat and backward compatibility #
sta d_comp
.FIN
lda #$01 usage is always 1 block
sta d_usage
lda d_head place back pointer to header block
sta d_dhdr
lda d_head+1
sta d_dhdr+1
lda d_stor storage type.
and #$E0 is it a directory?
beq cralcblk branch if seed file.
* Create Dir First Block
ldx #$1E move header to data block
cmvheadr lda d_stor,x
sta gbuf+4,x
dex
bpl cmvheadr
eor #$30
sta gbuf+4 make it a directory header mark.
.DO LOWERCASE=0
ldx #$07 overwrite password area and other
cmvpass lda pass,x header info.
sta gbuf+20,x
lda xdosver,x
sta gbuf+32,x
dex
bpl cmvpass
.ELSE
lda #$75
sta gbuf+20
ldx #XDOS.VolHdrDef.Cnt-1
.1 lda XDOS.VolHdrDef,x
sta gbuf+34,x
dex
bpl .1
.FIN
ldx #$02 and include info about parent directory
stx d_eof+1 set file size = 512
cmvparnt lda d_entblk,x
sta gbuf+39,x
dex
bpl cmvparnt
lda h_entln lastly, the length of parent's
sta gbuf+42 directory entries.
.DO LOWERCASE=1
jsr XDOS.PackGBuf
.FIN
cralcblk jsr alc1blk get address of file's data block
bcs crerr3
sta d_frst
sty d_frst+1
sta bloknml
sty bloknml+1
jsr XDOS.WriteGBuf go write data block of file
bcs crerr3
inc h_fcnt add 1 to total # of files in this dir
bne credone
inc h_fcnt+1
credone jsr drevise go revise directories with new file
bcs crerr3
jmp upbmap lastly, update volume bitmap
*--------------------------------------
entcalc lda /gbuf set high address of dir entry
sta zpt+1 index pointer.
lda #$04 calc address of entry based
ldx d_entnum on the entry #.
H3689 clc
H368A dex addr = gbuf + ((d_entnum-1) * h_entln)
beq H3696 branch with carry clear = no errors.
adc h_entln
bcc H368A
inc zpt+1 inc hi address.
bcs H3689 always.
H3696 sta zpt newly calculated low address.
crerr3 rts carry set if error.
*--------------------------------------
drevise lda p8date
beq drevise1 if no clock, then don't mod date/time.
ldx #$03
modtime lda p8date,x move last modification date/time
sta d_moddt,x to entry being updated.
dex
bpl modtime
drevise1 lda bkbitflg (bit 5 = backup needed)
tsb d_attr mark entry as backupable
lda d_dev get device # of directory
sta devnum to be revised
lda d_entblk and address of directory block.
ldx d_entblk+1
.DO LOWERCASE=1
jsr XDOS.ReadGBufAXDir
.ELSE
jsr XDOS.ReadGBufAX read block into general purpose buffer
.FIN
bcs crerr3
jsr entcalc fix up ptr to entry location within gbuf.
ldy h_entln now move 'd.' info to directory.
dey
.1 lda d_stor,y
sta (zpt),y
dey
bpl .1
lda d_head is the entry block same as
cmp bloknml the entry's header block?
bne H36E0 if no, go save entry block
lda d_head+1 then maybe, so test high addresses.
cmp bloknml+1
beq uphead branch if they are the same block.
H36E0 .DO LOWERCASE=1
jsr XDOS.WriteGBufDir
.ELSE
jsr XDOS.WriteGBuf go write updated directory block.
.FIN
bcs crerr3
lda d_head get address of header block and
ldx d_head+1
.DO LOWERCASE=1
jsr XDOS.ReadGBufAXDir
.ELSE
jsr XDOS.ReadGBufAX go read in header block to modify.
.FIN
bcs crerr3
uphead ldy #$01 update current # of files in this dir.
H36F2 lda h_fcnt,y
sta gbuf+37,y (current entry count)
dey
bpl H36F2
lda h_attr also update header's attributes.
sta gbuf+34
.DO LOWERCASE=1
jsr XDOS.WriteGBufDir
.ELSE
jsr XDOS.WriteGBuf go write updated header
.FIN
bcs H375A
*--------------------------------------
ripple lda gbuf+4 test for 'root' directory because
and #$F0 if it is, then directory revision
eor #$F0 is complete (leaves carry clear).
beq H3770 branch if done.
lda gbuf+41 get entry #
sta d_entnum
lda gbuf+42 and the length of entries in that dir
sta h_entln
lda gbuf+39 get addr of parent entry's dir block
ldx gbuf+40
.DO LOWERCASE=1
jsr XDOS.ReadGBufAX no need to pak/unpak....will disturb zpt
.ELSE
jsr XDOS.ReadGBufAX read it
.FIN
bcs H375A
jsr entcalc get indirect ptr to parent entry in gbuf
lda p8date don't touch mod
beq H373B if no clock...
ldx #$03 update the modification date & time
ldy #$24 for this entry too
H3732 lda p8date,x
sta (zpt),y
dey
dex
bpl H3732
H373B .DO LOWERCASE=1
jsr XDOS.WriteGBuf
.ELSE
jsr XDOS.WriteGBuf write updated entry back to disk.
.FIN
bcs H375A if error.
ldy #$26 compare current block # to this
lda (zpt),y entry's header block.
tax
dey
lda (zpt),y block as header.
cmp bloknml are low addresses the same?
bne H3751 branch if entry doesn't reside in same
cpx bloknml+1 are high address the same?
beq ripple they are the same, continue to root dir.
H3751 .DO LOWERCASE=1
jsr XDOS.ReadGBufAX
.ELSE
jsr XDOS.ReadGBufAX
.FIN
bcc ripple continue if read was good
H375A rts
H3770 clc no error
rts
*--------------------------------------
MAN
SAVE usr/src/prodos.fx/prodos.s.xdos.a
LOAD usr/src/prodos.fx/prodos.s
ASM
Reference in New Issue View Git Blame Copy Permalink