A2osX/SYS/KERNEL.S.FILE.txt
Rémy GIBERT 571fb59701 Kernel version 0.8 : SHELL, many new features, Error messages...etc...see README.md
Important KERNEL.S.ENV.txt rewrite to implement env in SHELL
2016-10-29 21:58:21 +02:00

363 lines
7.6 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

PR#3
PREFIX /A2OSX.SRC
NEW
INC 1
AUTO 6
.LIST OFF
*--------------------------------------
* For All SYS.xxxx calls, X = #SYSCall
* Must be kept in X before calling
* PFT.Check
*/--------------------------------------
* #FOpen
* Open a file
* ##In :
* PUSHW = AUXTYPE
* PUSHB = TYPE
* PUSHB = MODE
* SYS.FOPEN.R : if R and !exists -> ERROR
* SYS.FOPEN.W : if W and !exists -> CREATE
* SYS.FOPEN.A : Append
* SYS.FOPEN.T : Open/Append in Text mode
* SYS.FOPEN.X : Create if not exists
* PUSHW = PATH (PSTR)
* ##Out :
* CC : A = hFILE
* CS : A = EC
*\--------------------------------------
K.FOPEN jsr PFT.CheckPathSTK
>PULLW MLICALL.PARAMS+1
>PULLB K.FOPEN.MODE
>PULLB K.FOPEN.TYPE
>PULLW K.FOPEN.AUXTYPE
>MLICALL MLIGETFILEINFO
bcc .10 Already Exists
bit K.FOPEN.MODE Create if not exists ?
bpl .9 No, return MLI error
lda #S.FILEINFO.ACCESS.FULL Yes, Create...
sta MLICALL.PARAMS+3 Access
lda K.FOPEN.TYPE
sta MLICALL.PARAMS+4 File type
>LDYA K.FOPEN.AUXTYPE
>STYA MLICALL.PARAMS+5 Aux type
lda #S.FILEINFO.STORETYPE.STD
sta MLICALL.PARAMS+7
>MLICALL MLICREATE
bcc .10
.9 rts
.10 >PUSHWI S.FILE.PRODOS
>PUSHBI S.MEM.F.INIT0
jsr K.GetMem
bcs .99
>STYA ZPQuickPtr1
stx hFILE
>PUSHWI 1024 get a ProDOS IOBUF
>PUSHBI S.MEM.F.ALIGN+S.MEM.F.NOMOVE
jsr K.GetMem
bcs .98
>STYA MLICALL.PARAMS+3 Save Ptr to IOBUF for MLIOPEN call
txa
ldy #S.FILE.PRODOS.IOBUF
sta (ZPQuickPtr1),y
>MLICALL MLIOPEN
bcs .98
lda MLICALL.PARAMS+5 get ref_num
ldy #S.FILE.PRODOS.REF
sta (ZPQuickPtr1),y
sta MLICALL.PARAMS+1 Next MLI Calls are REF_NUM based
lda K.FOPEN.MODE
and #SYS.FOPEN.A Append ?
beq .20
>MLICALL MLIGETEOF
bcs .98
>MLICALL MLISETMARK
bcs .98
.20 lda K.FOPEN.MODE
and #SYS.FOPEN.T Text Mode ?
beq .30
lda #$FF
sta MLICALL.PARAMS+2
lda #$0D
sta MLICALL.PARAMS+3
>MLICALL MLINEWLINE
.30 lda hFILE
clc
rts CC
.98 pha save MLI error
jsr K.FCloseA.1
pla get back MLI error
sec
.99 rts
*--------------------------------------
K.FOPEN.MODE .BS 1
K.FOPEN.TYPE .BS 1
K.FOPEN.AUXTYPE .BS 2
hFILE .BS 1
*/--------------------------------------
* #FCloseA
* Close a file
* ##In :
* A = hFILE
* ##Out :
*\--------------------------------------
K.FCloseA jsr PFT.CheckFileA
sta hFILE
jsr K.GetMemPtrA
>STYA ZPQuickPtr1
K.FCloseA.1 ldy #S.FILE.PRODOS.REF
lda (ZPQuickPtr1),y
beq .1
sta MLICALL.PARAMS+1
>MLICALL MLICLOSE
.1 ldy #S.FILE.PRODOS.IOBUF
lda (ZPQuickPtr1),y
beq .2
jsr K.FreeMemA
.2 lda hFILE
jsr K.FreeMemA
rts
*/--------------------------------------
* #FRead
* Read bytes from file
* ##In :
* PUSHW = Dest Ptr
* PUSHW = Bytes To Read
* PUSHB = hFILE
* ##Out :
* Y,A = Bytes Read
*\--------------------------------------
K.FRead jsr PFT.CheckFileSTK
ldx #MLIREAD
bra K.FRead.1
*/--------------------------------------
* #FWrite
* ##In:
* PUSHW = Src Ptr
* PUSHW = Bytes To Write
* PUSHB = hFILE
* #Out:
* Y,A = Bytes Written
*\--------------------------------------
K.FWrite jsr PFT.CheckFileSTK
ldx #MLIWRITE
K.FRead.1 >PULLA
jsr FILE.SetupPrt1A
>PULLW MLICALL.PARAMS+4
>PULLW MLICALL.PARAMS+2
* >MLICALL MLIWRITE
lda #4 Param Count = 4 for MLIREAD & MLIWRITE
jsr A2osX.MLICALL
bcs .9
>LDYA MLICALL.PARAMS+6
.9 rts
*/--------------------------------------
* #FFlushA
* ##In:
* A = hFILE
*\--------------------------------------
K.FFlushA jsr PFT.CheckFileA
jsr FILE.SetupPrt1A
>MLICALL MLIFLUSH
rts
*/-------------------------------------
* #FSeek
* ##In:
* PUSHW = OffsetHi
* PUSHW = OffsetLo
* PUSHB = From
* PUSHB = hFILE
*\-------------------------------------
K.FSeek jsr PFT.CheckFileSTK
>PULLA
jsr FILE.SetupPrt1A
>PULLB K.FSEEK.FROM
>PULLW K.FSEEK.OFFSET
>PULLW K.FSEEK.OFFSET+2
lda K.FSEEK.FROM
* cmp #SYS.FSEEK.SET =0
bne .1
stz MLICALL.PARAMS+2
stz MLICALL.PARAMS+3
stz MLICALL.PARAMS+4
bra .8
.1 cmp #SYS.FSEEK.CUR
bne .2
>MLICALL MLIGETMARK
bcc .8
rts
.2 cmp #SYS.FSEEK.END
bne .98
>MLICALL MLIGETEOF
bcs .9
.8 lda MLICALL.PARAMS+2
adc K.FSEEK.OFFSET
sta MLICALL.PARAMS+2
lda MLICALL.PARAMS+3
adc K.FSEEK.OFFSET+1
sta MLICALL.PARAMS+3
lda MLICALL.PARAMS+4
adc K.FSEEK.OFFSET+2
sta MLICALL.PARAMS+4
bcs .99 Offset out of range!
>MLICALL MLISETMARK
.9 rts
.98 lda #SYSMGR.ERRSYN
.HS 2C bit abs
.99 lda #SYSMGR.ERRFTB
sec
rts
*--------------------------------------
K.FSEEK.FROM .BS 1
K.FSEEK.OFFSET .BS 4
*/--------------------------------------
* #FTellA
* ##In:
* A = hFILE
* ##Out:
* Y,A,X = Offset
*\--------------------------------------
K.FTellA jsr PFT.CheckFileA
K.FTellA.1 jsr FILE.SetupPrt1A
>MLICALL MLIGETMARK
bcs .9
>LDYA MLICALL.PARAMS+2
ldx MLICALL.PARAMS+4
.9 rts
*/--------------------------------------
* #FEOFA
* ##In:
* A = hFILE
* ##Out:
* CC :
* A=0 EOF
* A !=0 NOT EOF
* CS :
*\--------------------------------------
K.FEOFA jsr PFT.CheckFileA
jsr FILE.SetupPrt1A
jsr K.FTELLA.1
bcs .9
>STYA K.FEOFA.MARK
stx K.FEOFA.MARK+2
>MLICALL MLIGETEOF
bcs .9
sec
lda MLICALL.PARAMS+2
sbc K.FEOFA.MARK
bne .8
lda MLICALL.PARAMS+3
sbc K.FEOFA.MARK+1
bne .8
lda MLICALL.PARAMS+4
sbc K.FEOFA.MARK+2
.8 clc
.9 rts
K.FEOFA.MARK .BS 3
*/--------------------------------------
* #RemoveYA
*\--------------------------------------
K.RemoveYA jsr PFT.CheckPathYA
>STYA MLICALL.PARAMS+1
>MLICALL MLIDESTROY
rts
*/--------------------------------------
* #Rename
* Rename a file
* ##In :
* PUSHW = New Name
* PUSHW = Old Name
* ##Out :
*\--------------------------------------
K.Rename jsr PFT.CheckPathSTK
>PULLW MLICALL.PARAMS+1
>PULLW MLICALL.PARAMS+3
>MLICALL MLIRENAME
rts
*/--------------------------------------
* #Stat
* Return information about a file
* ##In :
* PUSHW = PTR to S.STAT buffer
* PUSHW = PTR to Filename (PSTR)
* ##Out :
*\--------------------------------------
K.Stat jsr PFT.CheckPathSTK
>PULLW MLICALL.PARAMS+1
>PULLW ZPQuickPtr2
>MLICALL MLIGETFILEINFO
bcs .9
jsr FILE.MLI2STAT
clc
.9 rts
*--------------------------------------
FILE.SetupPrt1A jsr K.GetMemPtrA
>STYA ZPQuickPtr1
ldy #S.FILE.PRODOS.REF
lda (ZPQuickPtr1),y
sta MLICALL.PARAMS+1
rts
*--------------------------------------
FILE.MLI2STAT
lda MLICALL.PARAMS+S.FILEINFO.ACCESS
cmp #S.FILEINFO.ACCESS.FULL
bne .1
lda #S.STAT.MODE.XO+S.STAT.MODE.WO+S.STAT.MODE.RO
bra .2
.1 and #S.FILEINFO.ACCESS.R
beq .2
lda #S.STAT.MODE.XO+S.STAT.MODE.RO
.2 ldy #S.STAT.MODE
sta (ZPQuickPtr2),y
ldx #2
ldy #S.STAT.PRODOS.TYPE+2
.3 lda MLICALL.PARAMS+S.FILEINFO.TYPE,x
sta (ZPQuickPtr2),y
dey
dex
bpl .3
rts
*--------------------------------------
MAN
SAVE SYS/KERNEL.S.FILE
LOAD SYS/KERNEL.S
ASM