A2osX/DRV/PIC.DRV.S.txt

137 lines
3.1 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

PR#3
PREFIX /A2OSX.SRC
NEW
INC 1
AUTO 6
.LIST OFF
.OP 65C02
.OR $2000
.TF /A2OSX.BOOT/DRV/PIC.DRV
*--------------------------------------
.INB /A2OSX.DEV/INC/MACROS.I
.INB /A2OSX.DEV/INC/A2OSX.I
*--------------------------------------
ZPTmpPtr1 .EQ ZPDRV
*--------------------------------------
SIG.05 .EQ $48
SIG.07 .EQ $48
*--------------------------------------
* File Header (16 Bytes)
*--------------------------------------
CS.START cld
jmp Dev.Detect cld,jmp abs=DRV
.DA #$61 6502,Level 1 (65c02)
.DA #1 DRV Layout Version 1
.DA 0
.DA CS.END-CS.START Code Length
.DA DEV.HEADER-CS.START Device Header Offset
.DA DRV.CS.START-CS.START Driver Code Offset
.DA DRV.CS.END-DRV.CS.START Drv Code Length
*--------------------------------------
* Relocation Table
*--------------------------------------
L.MSG.DETECT .DA MSG.DETECT
L.MSG.DETECT.OK .DA MSG.DETECT.OK
L.MSG.DETECT.KO .DA MSG.DETECT.KO
L.DEV.HEADER.NAME .DA DEV.HEADER.NAME
.DA 0 End Of Reloc Table
*--------------------------------------
Dev.Detect >LDYA L.MSG.DETECT
>SYSCALL CPrintFYA
stz ZPTmpPtr1
lda #$C1
sta ZPTmpPtr1+1
.1 ldy #5
lda (ZPTmpPtr1),y
cmp #SIG.05
bne .2
ldy #7
lda (ZPTmpPtr1),y
cmp #SIG.07
beq .3
.2 inc ZPTmpPtr1+1
lda ZPTmpPtr1+1
cmp #$C8
bne .1
>LDYA L.MSG.DETECT.KO
>SYSCALL CPrintFYA
lda #DEVMGR.ERRNOHW Not Found in any slot, exiting
sec
rts
.3 lda ZPTmpPtr1+1
sta DEVSLOTCn
and #$0F
sta DEVSLOT0n
ora #$30
sta DEV.HEADER.NAME+4
asl
asl
asl
asl
sta DEVSLOTn0
>PUSHW L.DEV.HEADER.NAME
>LDYA L.MSG.DETECT.OK
>SYSCALL CPrintFYA
clc
rts
*--------------------------------------
CS.END
MSG.DETECT >CSTR "Apple PIC (Parallel Interface Card).\n"
MSG.DETECT.OK >CSTR "PIC Installed As Device : %S\n"
MSG.DETECT.KO >CSTR "No PIC Found.\n"
*--------------------------------------
* Device Header (16 Bytes)
*--------------------------------------
DEV.HEADER cld
jmp (DRV.CS.START,x)
.DA #S.DEV.F.EVENT+S.DEV.F.COUT+S.DEV.F.CHAR
DEV.HEADER.NAME >PSTR "LPT1" NAME
.HS 00.00
.HS 00.00.00.00
*--------------------------------------
* Driver Code
*--------------------------------------
DRV.CS.START .DA OPEN
.DA GETEVENT
.DA COUT
.DA CLOSE
.DA GETINFO
.DA IRQ
L.DEVINFO .DA DEVINFO
.DA 0 end or relocation
*--------------------------------------
OPEN clc
rts
*--------------------------------------
GETEVENT lda #0
sec
rts
*--------------------------------------
COUT clc
rts
*--------------------------------------
CLOSE clc
rts
*--------------------------------------
GETINFO >LDYA L.DEVINFO
IRQ clc
rts
*--------------------------------------
DRV.CS.END
DEVSLOT0n .BS 1
DEVSLOTCn .BS 1
DEVSLOTn0 .BS 1
DEVINFO .DA #S.DEVINFO.TYPE.CHAR
.DA #0
*--------------------------------------
MAN
SAVE DRV/PIC.DRV.S
ASM