A2osX/SYS/KERNEL.S.MEM.txt
2020-08-09 21:47:42 +02:00

680 lines
14 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

NEW
AUTO 3,1
*--------------------------------------
ZPMemMgrSPtr .EQ ZPMEMMGR Pointer To Slot selected
ZPMemMgrTmp1 .EQ ZPMEMMGR+2
ZPMemMgrSize .EQ ZPMEMMGR+4
MEM.ReqFlags .EQ ZPMEMMGR+6 store requested Flags
MEM.BestSlot .EQ ZPMEMMGR+7
MEM.BestScore .EQ ZPMemMgrTmp1
*/--------------------------------------
* # Realloc
* ## C
* `void *realloc(short int hMem, int size);`
* ## ASM
* `>PUSHB hMem`
* `>PUSHW size`
* `>SYSCALL realloc`
* ## RETURN VALUE
* YA = ptr
* X = hMem
*\--------------------------------------
MEM.NewSize .BS 2
*--------------------------------------
K.Realloc >PULLW MEM.NewSize
>PULLA Src hMem
K.Realloc.I tax
jsr MEM.GetMemByID
ldy #S.MEM.LEN
lda (ZPMemMgrSPtr),y
pha
iny
lda (ZPMemMgrSPtr),y
ply
jsr MEM.MoveToAux x = Src hMem, YA = Old size
bcs .99
stx .7+1 Aux hMem
>LDYA MEM.NewSize
>STYA A2L size for MoveSetupA1A2
jsr K.getmem
bcs .99
stx .8+1 new main hMem to return
>STYA A4L Save MAIN Ptr
lda .7+1
>SYSCALL2 GetStkObjPtr
jsr MEM.MoveSetupA1A2 Setup AUX base & End Ptrs
clc Aux To Main
jsr AuxMove
.7 lda #$ff SELF MODIFIED
>SYSCALL2 FreeStkObj
.8 lda #$ff SELF MODIFIED
tax X = new hMem
jmp k.GetMemPtr YA = new ptr
.99 rts
*/--------------------------------------
* # GetMem
* Y,A = Size Requested
* ## RETURN VALUE
* CC : success
* YA = PTR to Mem (Uninitialised)
* X = hMem
* CS :
* A = EC
*\--------------------------------------
K.GetMem0 ldx #S.MEM.F.INIT0
.HS 2C BIT ABS
K.GetMem ldx #0
MEM.GetMem.YAX stx MEM.ReqFlags
sta ZPMemMgrSize+1
tya
bit #K.MEM.ALIGN-1 aligned ?
beq .10 yes, request it
and #K.MEM.nALIGNm1 align on boundary
clc
adc #K.MEM.ALIGN
bcc .10
inc ZPMemMgrSize+1
.10 sta ZPMemMgrSize
>LDYAI Mem.Table
>STYA ZPMemMgrSPtr
stz MEM.BestSlot
ldx #$ff
stx MEM.BestScore
stx MEM.BestScore+1
ldx #0 Current slot=0
bra .4 skip slot 0, Check if some free slot to reuse first
.1 inx move to next slot
jsr Mem.NextSlot
lda (ZPMemMgrSPtr) Get Flags
bmi .4 in use ?
.2 lda MEM.ReqFlags Found an empty slot
bit #S.MEM.F.NOCROSS
beq .21
ldy ZPMemMgrSize+1 > 255, not applicable
bne .22 Align to page if $100
ldy #S.MEM.PTR
lda (ZPMemMgrSPtr),y get LO of PTR
clc
adc ZPMemMgrSize
bcs .4 cross page boundary....
lda MEM.ReqFlags get back flags to test if match
.21 bit #S.MEM.F.ALIGN is request needs a page align ?
beq .3
.22 ldy #S.MEM.PTR
lda (ZPMemMgrSPtr),y get LO of PTR
bne .4 not page-aligned
.3 ldy #S.MEM.LEN
sec
lda (ZPMemMgrSPtr),y get LEN of this block
sbc ZPMemMgrSize compare with requested size
pha
iny
lda (ZPMemMgrSPtr),y
sbc ZPMemMgrSize+1
ply Y,A = SlotLen - ReqSize
bcc .4 req size > slot size
cpy MEM.BestScore
pha
sbc MEM.BestScore+1
pla
bcs .4 Delta is >= BestScore
bne .4 Delta is > 255...
sty MEM.BestScore
sta MEM.BestScore+1
stx MEM.BestSlot
.4 cpx Mem.LastSlot any other slot to check?
bne .1 last one, create a new slot
lda MEM.BestSlot
beq .5
tax
jsr MEM.GetMemByID
bra .7
*-------------- Create a New SLOT
.5 lda MEM.ReqFlags
bit #S.MEM.F.NOCROSS
beq .51
lda ZPMemMgrSize+1 > 255, not applicable
bne .52 Align to page if $100
lda Mem.Free target PTR will be in same page ?
beq .6 Memfree is xx00, will be in same page
cmp ZPMemMgrSize
bcs .6 yes, allocate
tay no, reserve a free slot to fill gap
lda #0
jsr Mem.AddSlot X = new slot
bcs .9
lda #S.MEM.F.NOCROSS Make sure marked FREE
sta (ZPMemMgrSPtr)
bra .6
.51 bit #S.MEM.F.ALIGN is request needs a page align ?
beq .6
.52 lda Mem.Free target PTR will be page aligned ?
sec
sbc ZPMemMgrSize
beq .6 yes, allocate
tay no, reserve a free slot to fill gap
lda #0
jsr Mem.AddSlot X = new slot
bcs .9
lda #S.MEM.F.ALIGN Make sure marked FREE
sta (ZPMemMgrSPtr)
.6 >LDYA ZPMemMgrSize
jsr Mem.AddSlot X = new slot
bcs .9
*-------------- Reuse this SLOT
.7 lda MEM.ReqFlags get requested flags
ora #S.MEM.F.INUSE mark as in use
sta (ZPMemMgrSPtr)
and #S.MEM.F.INIT0
beq .8
jsr MEM.Init0
.8 lda #0
ldy #S.MEM.BIN
sta (ZPMemMgrSPtr),y
inc Mark this slot used by one process
ldy #S.MEM.REFCNT
sta (ZPMemMgrSPtr),y
lda RDREADAUX
pha
sta CLRREADAUX
ldy #S.PS.PID
lda (pPS),y
ldy #S.MEM.OWNERPID
sta (ZPMemMgrSPtr),y
pla
bpl .80
sta SETREADAUX
.80 clc
jmp MEM.GetMEMPTR
* A = HI PTR,Y = LO PTR,X = Current hMem
.9 rts
*--------------------------------------
* Mem.AddSlot
* In:
* Y,A = Requested size
* Out:
*--------------------------------------
Mem.AddSlot >STYA ZPMemMgrTmp1 save req size
ldx Mem.LastSlot
inx
beq .99 > 255 ERR:OUT OF SLOT
lda Mem.Free Compute base PTR=FREE-REQ size
sec
sbc ZPMemMgrTmp1
tay save new Mem.Free LO
lda Mem.Free+1
sbc ZPMemMgrTmp1+1
pha save new Mem.Free HI
cpy Mem.LoMem
sbc Mem.LoMem+1
bcc .98 ERR out of mem
jsr Mem.NextSlot X,Y unmodified
tya get back Mem.Free LO
ldy #S.MEM.PTR
sta Mem.Free set as system Mem.Free value
sta (ZPMemMgrSPtr),y store it as base address of new slot
iny
pla get back Mem.Free HI
sta Mem.Free+1
sta (ZPMemMgrSPtr),y
iny
lda ZPMemMgrTmp1 get requested size
sta (ZPMemMgrSPtr),y setup slot LEN
iny
lda ZPMemMgrTmp1+1
sta (ZPMemMgrSPtr),y
stx Mem.LastSlot mark this slot allocated
clc
rts
.98 pla discard new Mem.Free HI
.99 lda #E.OOM
sec
rts
*--------------------------------------
MEM.NextSlot lda ZPMemMgrSPtr
clc
adc #S.MEM
sta ZPMemMgrSPtr
bcc .8
inc ZPMemMgrSPtr+1
.8 rts
*--------------------------------------
MEM.Init0 phx
ldy #S.MEM.PTR
lda (ZPMemMgrSPtr),y ZPMemMgrSPtr already set
sta .12+1
iny
lda (ZPMemMgrSPtr),y
sta .12+2
lda ZPMemMgrSize
eor #$ff
tay y=not lo count
lda ZPMemMgrSize+1
eor #$ff a=not hi count
ldx #0
.11 iny
bne .12
inc
beq .13
.12 stz $ffff,x
inx
bne .11
inc .12+2
bra .11
.13 plx
rts
*/--------------------------------------
* # FreeMem
* A = hMem To Free
* ## RETURN VALUE
* none.
* (X unmodified)
*\--------------------------------------
K.FreeMem.MSG .AZ "FreeMem:hMem=$%h,PID=%d\r\n"
*--------------------------------------
K.FreeMem.ERR >PUSHWI K.FreeMem.MSG
tya hMem n Y
>PUSHA
ldy #S.PS.PID
lda (pPS),y
>PUSHA
>PUSHBI 2
.1 >SYSCALL2 printf
>DEBUG
lda #E.INVH
sec
rts
*--------------------------------------
K.FreeMem tay
beq K.FreeMem.ERR Slot=0, reserved by Kernel
cmp Mem.LastSlot
bcc .10
bne K.FreeMem.ERR
.10 jsr MEM.GetMemByID X,Y unmodified
lda (ZPMemMgrSPtr) In use ?
bpl K.FreeMem.ERR
jsr MEM.DecRefCnt only one left ?
bne .8 no, must be a code segment loaded several times
lda (ZPMemMgrSPtr)
and #$7f keep flags for memdump
sta (ZPMemMgrSPtr) Mark as FREE
and #S.MEM.F.CODE CS: Any BINPATH to discard ?
beq .1
ldy #S.MEM.BIN
lda (ZPMemMgrSPtr),y
jsr MEM.GetMemByID X unmodified
* lda (ZPMemMgrSPtr)
* bpl * ***MUST BE ALLOCATED***
lda #0 mark BINPATH slot as free
sta (ZPMemMgrSPtr)
.1 lda Mem.LastSlot
beq .8
jsr MEM.GetMemByID X unmodified
lda (ZPMemMgrSPtr)
bmi .8 used, exit
.2 dec Mem.LastSlot free! get previous....
beq .80 empty list: go set Mem.Free=Mem.HiMem
lda Mem.LastSlot
jsr MEM.GetMemByID X unmodified
lda (ZPMemMgrSPtr)
bpl .2 free again! loop
ldy #S.MEM.PTR
lda (ZPMemMgrSPtr),y set Mem.Free...
sta Mem.Free
iny
lda (ZPMemMgrSPtr),y
sta Mem.Free+1
.8 clc
rts
.80 >LDYA Mem.HiMem
>STYA Mem.Free
clc
rts
*/--------------------------------------
* # GetMemPtr
* A = hMem
* ## RETURN VALUE
* Y,A = PTR to MemBlock
* (X unmodified)
*\--------------------------------------
* Optimized for :
* Mem.Table is page aligned at $800
* S.MEM is 8 bytes
*--------------------------------------
.DO Mem.Table=$800
.ELSE
!!!!!WARNING!!!!!
.FIN
.DO S.MEM=8
.ELSE
!!!!!WARNING!!!!!
.FIN
*--------------------------------------
K.GetMemPtr jsr MEM.GetMemByID
MEM.GetMEMPTR ldy #S.MEM.PTR
lda (ZPMemMgrSPtr),y
pha
iny
lda (ZPMemMgrSPtr),y
ply
rts
*--------------------------------------
MEM.GetMemByID sta ZPMemMgrSPtr
lda /Mem.Table/8
asl ZPMemMgrSPtr
rol
asl ZPMemMgrSPtr
rol
asl ZPMemMgrSPtr
rol
sta ZPMemMgrSPtr+1
rts
*--------------------------------------
Mem.SetOwner ldy #S.MEM.OWNERPID
lda CORE.LastPSID
sta (ZPMemMgrSPtr),y
rts
*--------------------------------------
Mem.IncRefCnt ldy #S.MEM.REFCNT
lda (ZPMemMgrSPtr),y
inc
sta (ZPMemMgrSPtr),y
rts
*--------------------------------------
Mem.DecRefCnt ldy #S.MEM.REFCNT
lda (ZPMemMgrSPtr),y
dec
sta (ZPMemMgrSPtr),y
rts
*/--------------------------------------
* # NewStkObj
* Y,A = Size Requested
* ## RETURN VALUE
* CC : success
* YA = PTR to Mem (Uninitialised)
* X = hMem
* CS :
* A = EC
*\--------------------------------------
*/--------------------------------------
* # LoadStkObj
* Load a file in AUX memory (Stock Objects)
* PUSHW = PATH (Handled by....
* PUSHB = MODE ...
* PUSHB = TYPE ...
* PUSHW = AUXTYPE ...FOpen)
* ## RETURN VALUE
* Y,A = File Length
* X = hMem of Loaded Object in AUX mem
*\--------------------------------------
K.LoadStkObj >SYSCALL2 LoadTxtFile To get ending \0
bcs .99
stx .90+1
sty .81+1 Save File Len
sta .82+1
iny
bne .1
inc +1 for ending 0
.1 jsr MEM.MoveToAux X = AUX hMem
bcs .9
.81 ldy #$ff and file len in Y,A
.82 lda #$ff
* clc
rts
.9 pha
.90 lda #$ff SELF MODIFIED
jsr K.freemem
pla
sec
.99 rts
*/--------------------------------------
* # GetStkObjPtr
* ## ASM
* `lda hStkObj`
* `>SYSCALL GetStkObjPtr`
* ## RETURN VALUE
*\--------------------------------------
*/--------------------------------------
* # FreeStkObj
* A = hMem To Free (AUX Memory)
* ## RETURN VALUE
* none.
* (X,Y unmodified)
*\--------------------------------------
*--------------------------------------
MEM.DupX sta SETREADAUX
sta SETWRITEAUX
jsr MEM.Dup
sta CLRREADAUX
sta CLRWRITEAUX
rts
*--------------------------------------
MEM.Dup jsr K.GetMemPtr
>STYA A1L
ldy #S.MEM.LEN
lda (ZPMemMgrSPtr),y
pha
eor #$ff
sta A4L
iny
lda (ZPMemMgrSPtr),y
eor #$ff
sta A4L+1
eor #$ff
ply
jsr K.GetMem
bcs .9
>STYA A2L
ldy #0
.1 inc A4L
bne .2
inc A4L+1
beq .8
.2 lda (A1L),y
sta (A2L),y
iny
bne .1
inc A1L+1
inc A2L+1
bra .1
.8 txa
* clc
.9
MEM.Dup.RTS rts
*--------------------------------------
MEM.CopyToMain clc
.HS B0 BCS
MEM.MoveToMain sec
ror .1+1
stx .2+1 Save AUX hMem
>STYA A2L Save LEN to copy/move
sta CLRREADAUX Make sure MAIN !!!!
sta CLRWRITEAUX
jsr K.GetMem
bcs MEM.Dup.RTS
stx .8+1 Save MAIN hMem
>STYA A4L Save MAIN Ptr
lda .2+1
>SYSCALL2 GetStkObjPtr
jsr MEM.MoveSetupA1A2 Setup AUX base & End Ptrs
clc Aux To Main
jsr AuxMove
.1 lda #$ff SELF MODIFIED
bpl .8
.2 lda #$ff SELF MODIFIED
>SYSCALL2 FreeStkObj release AUX memory
.8 ldx #$ff Returns MAIN hMem
txa
jmp K.GetMemPtr Y,A = Ptr
*--------------------------------------
MEM.MoveToAux stx .1+1 Save MAIN hMem
>STYA A2L Save LEN to move
>SYSCALL2 NewStkObj
bcs .9
stx .8+1 Save AUX hMem
>STYA A4L Save AUX Ptr
lda .1+1
jsr K.GetMemPtr
jsr MEM.MoveSetupA1A2 Setup MAIN base & End Ptrs
sec Main To Aux
jsr AuxMove
.1 lda #$ff SELF MODIFIED
jsr K.FreeMem release MAIN memory
.8 ldx #$ff Returns AUX hMem
* clc
.9 rts
*--------------------------------------
MEM.MoveSetupA1A2
>STYA A1L Start Address
pha
tya
clc
adc A2L
tay
pla
adc A2L+1
sta A2L+1
tya
bne .1
dec A2L+1
.1 dey
sty A2L
rts
*--------------------------------------
MEM.GetKrnlBuf pha
tya
clc
adc DevMgr.Free
tax
pla
adc DevMgr.Free+1
bcs .99 we crossed $FFFF, out of mem
cpx #DevMgr.HiMem
pha
sbc /DevMgr.HiMem
pla
bcs .99 No More Room...
ldy DevMgr.Free
stx DevMgr.Free
ldx DevMgr.Free+1
sta DevMgr.Free+1
txa
* clc
rts
.99 lda #E.OOM
* sec
rts
*--------------------------------------
MAN
SAVE USR/SRC/SYS/KERNEL.S.MEM
LOAD USR/SRC/SYS/KERNEL.S
ASM