A2osX/ProDOS.203/ProDOS.S.RAMX.txt
burniouf 9a7d20a7e1 ProDOS 203 / FX:TC mod for year 2022-2026
FORMAT: new switches & checks
SH:BREAK in FOR and WHILE
ASM / S-C MASM: new directives, CString support and .HX
LC / UC:bugfix
DHGR.DRV:bugfix
LIBGUI:wip
CC:wip
2022-12-07 08:02:29 +01:00

323 lines
9.6 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

NEW
AUTO 3,1
* object code = ram_0
* /RAM driver (aux bank portion)
* this code is packed into $200 length with no room for expansion !!
* (see note at end of this obj)
* after the main /RAM routine has determined that the command is ok and the
* block to be read/written is within range, it transfers control to this
* aux /RAM routine which remaps the block requested as follows:
* request blocks 0,1: invalid
* 2: returns VDIR (card block 3)
* 3: returns BITMAP (synthesized)
* 4: returns card block 0
* $05-$5F: returns card blocks $05-$5F
* $60-$67: returns blocks $68-$7F in bank 1 of language card
* $68-$7F: returns blocks $68-$7F in bank 2 of language card
H5100 lda RD80STORE read 80 store
pha save for later
sta CLR80STORE turn off 80 store
ldx #$04 move the parameters for use:
L5109 lda A4L,x cmd, unit, bufptr and block (lo)
sta tcmd,x -> tcmd, tunit, R2L, R2H, R01
dex
bpl L5109
and formatflg format the volume first time
bne L514F thru, or when requested.
ldx bloknml save R01 during format.
lda /vblock1 block to be cleared.
jsr clrbuf1 clears all buffers.
ldy #$03 format volume in 2 chunks.
L511F lda VDIR,y
sta vblock1+4,y
dey
bpl L511F
lda #$FE set last block as unusable
sta BITMAP+15 to protect vectors.
tya set bitmap bits to $FF.
ldy #$0E 15 bytes to set
L5130 sta BITMAP,y
dey
bne L5130
sty BITMAP first byte = 0.
ldy #$07 do other chunk
L513B lda access,y
sta vblock1+34,y
dey
bpl L513B
lda formatflg if 0, set to $FF
bne L51AA else exitcard.
sty formatflg y = $FF, won't format next time.
stx R01 restore R01
* use the requested block number to determine
* which routine performs the transfer
L514F asl R01 block requested -> page requested.
lda R01 get page requested.
cmp #$BF in language card ?
bcs L5163 yes, do it.
cmp #$06 bitmap ?
bne L5160
jmp tbmap yes, transfer bitmap
L5160 jmp treg else normal transfer.
* when a block between $60 and $7F is requested, it must be spirited into/from
* the language card area of the 64k card. this requires a 2 stage move:
* into the temp buffer and then to it's real destination.
L5163 tax save R1 for later.
jsr setptr get direction
php and save it.
bcs L51B8 if it's a write.
lcrd txa get R1 back
cmp #$CF which bank is it in ?
bcs L5173 in main bank.
ora #$10 in secondary bank.
bne L5179 branch always.
L5173 sta RRAMWRAMBNK2 turn on main $D000
sta RRAMWRAMBNK2
L5179 sta R01 restore R1.
lda R2H save R2 for later
pha
ldx R2L
sta SETALTZP use alternate zero page/stack
lda /dbuf set R2 to dbuf
sta R2H
lda #dbuf
sta R2L
jsr setptr set pointers
tay A > 0 from setptr
L5194 lda (A1L),y move A1,A2 to A4,A3
sta (A4L),y
lda (A2L),y
sta (A3L),y
dey
bne L5194
sta CLRALTZP use main zero page/stack
L51A2 stx R2L
pla restore R2
sta R2H
plp get direction.
L51AA bcs L51B5 write, done with move.
sta RRAMWRAMBNK1 switch in MLI part of LC
sta RRAMWRAMBNK1
jsr blockdo0 read, transfer dbuf to main
L51B5 jmp exitcard
L51B8 jsr blockdo0 transfer main to dbuf.
jmp lcrd transfer dbuf to language card
* blockdo0 transfers a block between main memory and the 64k card. R1 contains
* the page address of the block in the card; R2 contains the page address of
* the block in main memory. the address in main memory is always in the
* language card, so the language card is always switched in. if cmd is 2, a
* write is done (R2->R1); if cmd is 1, a read is done (R1->R2).
blockdo0 lda /dbuf set up R1 = dbuf
blockdo1 sta R01
blockdo jsr setptr set pointers.
bcs L51DB it's a write.
sta CLRWRITEAUX transfer buffer directly to main.
tay 0 left from setptr.
L51CC lda (A1L),y transfer A1,A2 to A4,A3
sta (A4L),y
lda (A2L),y
sta (A3L),y
dey
bne L51CC
sta SETWRITEAUX back the way it was.
donewrt rts mainwrt returns here
L51DB lda #mainwrt pointers set up,
sta passit pass control to main ram
lda /mainwrt
jmp ex1 set passit+1 and transfer
* setptr is used by other routines to set up pointers and dtect read or write
setptr lda tcmd is it read or write ?
lsr
bcs L5208 taken if write.
lda R2H destination page
sta A4L+1
sta A3L+1
lda R2L
sta A4L
sta A3L
lda R01 source page
sta A1L+1
sta A2L+1
lda #$00 source page aligned
sta A1L
sta A2L
beq L5223
L5208 lda R2H source page
sta A1L+1
sta A2L+1
lda R2L
sta A1L
sta A2L
lda R01 destination page
sta A4L+1
sta A3L+1
lda #$00 destination page aligned
sta A4L
sta A3L
L5223 inc A2L+1
inc A3L+1
rts
* tzip is called if blocks 0,1,4,5 are requested.
* on write it does nothing, on read it returns 0's.
tzip jsr clrbuf0 fill dbuf with 0's
jsr blockdo transfer the 0's
jmp exitcard and return
* clrbuf fills the buffer indicated by R01 to 0's.
* should only be called on a read or format.
clrbuf0 lda /dbuf dbuf is temp buffer.
clrbuf1 sta R01 assign to block.
clrbuf2 jsr setptr set pointers
tay acc = 0
L523A sta (A1L),y
sta (A2L),y
dey
bne L523A
rts
* treg maps the requested block into the aux card
* so that 8k data files will be contiguous (the index
* blocks will not be placed within data).
treg cmp #$04 page 4 = vdir
bne L524A not vdir, continue
lda #$07 else transfer block 7
bne L5258
L524A cmp #$0F if any page < $F (block 8) requested,
bcc tzip it is invalid.
ldx #$00 x = # of iterations.
lda bloknml use true block #.
cmp #$5D beyond 8k blocks ?
bcc L525B no, do normal
sbc #$50 else subtract offset
L5258 jmp times2 and multiply by 2
* determine which 8k chunk it is in, place in x;
* block offset into chunk goes into y.
L525B sec
sbc #$08 block=block-6
L525E cmp #$11 if <=17 then done
bcc L5268
sbc #$11 else block=block-17.
inx iteration count.
bpl L525E should branch always
brk otherwise crash !!!
L5268 tay remainder in y
* if remainder is 1 then it's an index block:
* start index blocks at $1000,$2000...$19FF.
* if remainder is 0 then it is first data block
* in 8k chunk. page is 32 + (16 * x).
* otherwise, it is some other data block.
* page is 32 + (16 * x) + (2 * y)
cpy #$01 is it index block ?
bne L5273 no.
txa index = 2 * (8 + x)
clc
adc #$08
bne times2 multiply by 2.
L5273 inx iteration + 1.
txa page = 2 * (16 + 8x)
asl
asl
asl
asl
sta R01
tya get offset into 8k chunk
beq L5281 if 0, no offset
dey else offset = 2 * y
tya
L5281 clc
adc R01
times2 asl acc = 2 * acc
jsr blockdo1 store in R01 and transfer
jmp exitcard and return
* when block 3 is requested, the bitmap is returned. the real bitmap is only
* 16 bytes long; the rest of the block is synthesized. the temporary buffer
* at $800 is used to build/read a full size bitmap block.
tbmap lda /dbuf use temp buffer as block
sta R01
jsr setptr set pointers, test read/write.
bcs L52A9 branch if it's write.
jsr clrbuf2
ldy #$0F put real bitmap there
L529B lda BITMAP,y
sta (A1L),y
dey
bpl L529B
jsr blockdo move temp buf to user buf
jmp exitcard
L52A9 jsr blockdo move user buf to temp buf
jsr setptr
ldy #$0F move temp buf to bitmap.
L52B1 lda (A4L),y (pointer set by setptr)
sta BITMAP,y
dey
bpl L52B1
jmp exitcard
formatflg .HS 00 not formatted yet
tcmd .HS 00 command
.HS 00 unit (not used)
R2L .HS 00 R2 = user buffer
R2H .HS 00
R01 .HS 00 page requested
BITMAP .HS 00FFFFFF blocks 0-7 used
.HS FFFFFFFF
.HS FFFFFFFF
.HS FFFFFFFE
VDIR .HS F3 storage type = F, name length = 3
.AS "RAM"
access .DA #$C3 destroy, rename, read enabled
.HS 27 entry length
.HS 0D
.HS 0000
.HS 0300 block 3
.HS 7F 128 blocks
exitcard lda RRAMWRAMBNK1 restore language card
lda RRAMWRAMBNK1
pla get 80store
bpl L52EA 80store wasn't on
sta SET80STORE enable 80store
L52EA jmp bypass jump around passit
passit .HS 0000
bypass lda #noerr set up return to noerr
sta passit
lda /noerr
ex1 sta passit+1 also used by blockwrite
clc transfer card to main
clv use standard zeropage/stack
jmp xfer jmp back from language card.
* NOTE: the previous section of code MUST NOT use $3FE or $3FF
* since the interrupt vector must go there if aux interrupts
* are to be used. no room for expansion here !!
.HS 0000 $3FE-$3FF
* end of obj ram_0
*--------------------------------------
MAN
SAVE usr/src/prodos.203/prodos.s.ramx
LOAD usr/src/prodos.203/prodos.s
ASM