A2osX/SYS/KERNEL.S.MEM.txt

511 lines
11 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

PR#3
PREFIX /A2OSX.SRC
LOMEM $A00
INC 1
AUTO 6
*--------------------------------------
* !!!!!! DO NOT USE ZPPtrs !!!!!
*--------------------------------------
ZPMemMgrSPtr .EQ ZPMEMMGR Pointer To Slot selected
ZPMemMgrTmp1 .EQ ZPMEMMGR+2
ZPMemMgrSrcPtr .EQ ZPMEMMGR+4
ZPMemMgrDstPtr .EQ ZPMEMMGR+6
*--------------------------------------
MemMgr.ReqSize .EQ ZPMEMMGR+8 store requested Size
MemMgr.ReqFlags .EQ ZPMEMMGR+10 store requested Flags
*--------------------------------------
* TODO :
* - Create a 256 bytes table
* mapping hMem's to real memory blocks to help
* Garbage collector move blocks
* - mem.ID=0 always used! useful to test if hMem=0
*--------------------------------------
* PUBLIC
*/--------------------------------------
* #GetMem
* ##In:
* PUSHW = Size Requested
* PUSHB = Options
* S.MEM.F.INIT0 : init memory with 00
* S.MEM.F.ALIGN : page aligned
* ##Out:
* CC : success
* YA = PTR to Mem
* X = hMem
* CS :
* A = EC
*\--------------------------------------
K.GetMem >PULLB MemMgr.ReqFlags store requested flags
and #S.MEM.F.AUX
beq .11
sta SETREADAUX Aux Mem requested,switch to AUX
sta SETWRITEAUX
.11 >PULLAX get requested size
bit #$0F 16 bytes aligned ?
beq .10 yes, request it
and #$F0 align on 16 bytes
clc
adc #$10
bcc .10
inx
.10 >STAX MemMgr.ReqSize
>LDYAI MemMgr.Table
>STYA ZPMemMgrSPtr
ldx #0 Current slot=0
bra .4 skip slot 0, Check if some free slot to reuse first
.1 inx move to next slot
jsr MemMgr.NextSlot
lda (ZPMemMgrSPtr) Get Flags
bmi .4 in use ?
.2 lda MemMgr.ReqFlags Found an empty slot
and #S.MEM.F.ALIGN is request needs a page align ?
beq .3
ldy #S.MEM.PTR
lda (ZPMemMgrSPtr),y get LO of PTR
bne .4 not page-aligned
.3 ldy #S.MEM.LEN
lda (ZPMemMgrSPtr),y get LEN of this block
cmp MemMgr.ReqSize compare with requested size
bne .4
iny
lda (ZPMemMgrSPtr),y
cmp MemMgr.ReqSize+1
beq .7 requested size matches slot size !!!
.4 cpx MemMgr.LastSlot any other slot to check?
bne .1 last one, create a new slot
*-------------- Create a New SLOT
lda MemMgr.ReqFlags
and #S.MEM.F.ALIGN is request needs a page align ?
beq .6
lda MemMgr.Free target PTR will be page aligned ?
sec
sbc MemMgr.ReqSize
beq .6 yes, allocate
tay no, reserve a free slot to fill gap
lda #0
jsr MemMgr.AddSlot X = new slot
bcs .9
.6 >LDYA MemMgr.ReqSize
jsr MemMgr.AddSlot X = new slot
bcs .9
*-------------- Reuse this SLOT
.7 lda MemMgr.ReqFlags get requested flags
ora #S.MEM.F.INUSE mark as in use
sta (ZPMemMgrSPtr)
and #S.MEM.F.INIT0
beq .8
jsr MemMgr.Init0 X not madified
.8 lda #0
ldy #S.MEM.BIN
sta (ZPMemMgrSPtr),y
inc Mark this slot used by one process
ldy #S.MEM.REFCNT
sta (ZPMemMgrSPtr),y
ldy #S.PS.PID
lda (pPs),y
ldy #S.MEM.OWNERPID
sta (ZPMemMgrSPtr),y
ldy #S.MEM.PTR
lda (ZPMemMgrSPtr),y
pha
iny
lda (ZPMemMgrSPtr),y A = HI PTR
ply Y = LO PTR
clc X = Current hMem
.9 bit MemMgr.ReqFlags
bpl .99
sta CLRREADAUX
sta CLRWRITEAUX
.99 rts
*--------------------------------------
* MemMgr.AddSlot
* In:
* Y,A = Requested size
* Out:
*--------------------------------------
MemMgr.AddSlot >STYA ZPMemMgrTmp1 save req size
ldx MemMgr.LastSlot
inx
beq .99 > 255 ERR:OUT OF SLOT
lda MemMgr.Free Compute base PTR=FREE-REQ size
sec
sbc ZPMemMgrTmp1
tay save new MemMgr.Free LO
lda MemMgr.Free+1
sbc ZPMemMgrTmp1+1
pha save new MemMgr.Free HI
cpy MemMgr.LoMem
sbc MemMgr.LoMem+1
bcc .98 ERR out of mem
jsr MemMgr.NextSlot X,Y unmodified
tya get back MemMgr.Free LO
ldy #S.MEM.PTR
sta MemMgr.Free set as system MemMgr.Free value
sta (ZPMemMgrSPtr),y store is as base address of new slot
iny
pla get back MemMgr.Free HI
sta MemMgr.Free+1
sta (ZPMemMgrSPtr),y
iny
lda ZPMemMgrTmp1 get requested size
sta (ZPMemMgrSPtr),y setup slot LEN
iny
lda ZPMemMgrTmp1+1
sta (ZPMemMgrSPtr),y
stx MemMgr.LastSlot mark this slot allocated
clc
rts
.98 pla discard new MemMgr.Free HI
lda #MemMgr.ERROOM
sec
rts
.99 lda #MemMgr.ERROOH
sec
rts
*--------------------------------------
MemMgr.NextSlot lda ZPMemMgrSPtr
clc
adc #S.MEM
sta ZPMemMgrSPtr
bcc .8
inc ZPMemMgrSPtr+1
.8 rts
*--------------------------------------
MemMgr.Init0 ldy #S.MEM.PTR
lda (ZPMemMgrSPtr),y ZPMemMgrSPtr already set
sta .2+1
iny
lda (ZPMemMgrSPtr),y
sta .2+2
ldy #S.MEM.LEN
lda (ZPMemMgrSPtr),y
eor #$ff
pha
iny
lda (ZPMemMgrSPtr),y
eor #$ff a=not hi count
ply y=not lo count
.1 iny
bne .2
inc
beq .8
.2 stz $ffff
inc .2+1
bne .1
inc .2+2
bne .1
.8 rts
*/--------------------------------------
* #FreeMemA
* ##In:
* A = hMem To Free
* ##Out:
* none.
* (X,Y unmodified)
*\--------------------------------------
K.FreeMemA phy
tay
beq * Slot=0, reserved by Kernel
jsr K.GetMemByIDA X unmodified
lda (ZPMemMgrSPtr)
bpl .9 In use ?
ldy #S.MEM.REFCNT
lda (ZPMemMgrSPtr),y Get count of those referencing this hMem
dec only one left ?
sta (ZPMemMgrSPtr),y
bne .8 no, must be a code segment loaded several times
lda #0 mark this slot as free
sta (ZPMemMgrSPtr)
ldy #S.MEM.BIN
lda (ZPMemMgrSPtr),y Any BINPATH to discard ?
beq .1
jsr K.GetMemByIDA X unmodified
lda (ZPMemMgrSPtr)
bpl * ***MUST BE ALLOCATED***
lda #0 mark BINPATH slot as free
sta (ZPMemMgrSPtr)
.1 lda MemMgr.LastSlot
beq .8
jsr K.GetMemByIDA X unmodified
lda (ZPMemMgrSPtr)
bmi .8
ldy #S.MEM.LEN
lda (ZPMemMgrSPtr),y give back LEN bytes
clc
adc MemMgr.Free to MemMgr.Free
sta MemMgr.Free
iny
lda (ZPMemMgrSPtr),y
adc MemMgr.Free+1
sta MemMgr.Free+1
dec MemMgr.LastSlot discard last slot
bne .1 no slot left, exit
.8 ply
clc
rts
*--------------------------------------
.9 ply discard saved Y
lda $D000
sta .91+1
bit RRAMWRAMBNK2
bit RRAMWRAMBNK2
jsr PS.Select0
jsr DevMgr.SYS.Control
pla Get PC and sub 2 for calling address
sec
sbc #2
tay
pla
sbc #0
>PUSHYA
>LDYAI K.FreeMemA.ERR
jsr K.CPrintFYA
.91 ldx #$ff
bit $C000,x
bit $C000,x
bra *
*--------------------------------------
K.FreeMemA.ERR >CSTR "***MemMgr:Attempt to Free an already freed hMem at $%H"
*/--------------------------------------
* #GetMemPtrA
* ##In:
* A = hMem
* ##Out:
* Y,A = PTR to MemBlock
* (X unmodified)
*\--------------------------------------
K.GetMemPtrA jsr K.GetMemByIDA
ldy #S.MEM.PTR
lda (ZPMemMgrSPtr),y
pha
iny
lda (ZPMemMgrSPtr),y
ply
rts
*/--------------------------------------
* #GetMemByIDA
* ##In:
* A = hMem
* ##Out:
* Y,A = ZPMemMgrSPtr = PTR to S.MEM
* X unmodified
*\--------------------------------------
* Optimized for :
* MemMgr.Table is page aligned at $1800
* S.MEM is 8 bytes
*--------------------------------------
.DO MemMgr.Table=$1800
.ELSE
!!!!!WARNING!!!!!
.FIN
.DO S.MEM=8
.ELSE
!!!!!WARNING!!!!!
.FIN
*--------------------------------------
K.GetMemByIDA sta ZPMemMgrSPtr
lda /MemMgr.Table/8
asl ZPMemMgrSPtr
rol
asl ZPMemMgrSPtr
rol
asl ZPMemMgrSPtr
rol
sta ZPMemMgrSPtr+1
ldy ZPMemMgrSPtr
rts
*--------------------------------------
* OLD CODE
*--------------------------------------
* stz ZPMemMgrSPtr+1
* asl
* rol ZPMemMgrSPtr+1
* asl
* rol ZPMemMgrSPtr+1
* asl
* rol ZPMemMgrSPtr+1
** clc IMPLICIT
* adc #MemMgr.Table
* tay
* lda ZPMemMgrSPtr+1
* adc /MemMgr.Table
* sty ZPMemMgrSPtr
* sta ZPMemMgrSPtr+1
* rts
*--------------------------------------
K.LoadStkObjYA
*--------------------------------------
K.GetStkObjA
*--------------------------------------
K.FreeStkObjA
*--------------------------------------
K.SetLoMem
clc
rts
*/--------------------------------------
* #GetMemStatYA
* ##In:
* Y,A = 24 bytes buffer
* ##Out:
* Buffer filled with memory stats
*\--------------------------------------
K.GetMemStatYA >STYA ZPMemMgrDstPtr
ldy #6
.1 lda MemMgr.Table,y
sta (ZPMemMgrDstPtr),y
dey
bpl .1
ldx #6
ldy #14
sta SETREADAUX
.2 lda MemMgr.Table,x
sta (ZPMemMgrDstPtr),y
dey
dex
bpl .2
sta CLRREADAUX
ldx #6
ldy #22
.3 lda DevMgr.Stat,x
sta (ZPMemMgrDstPtr),y
dey
dex
bpl .3
rts
*--------------------------------------
* In:
* Y,A = BINPATH (PSTR)
* Out:
* Y,A = ZPMemMgrSPtr = PTR to S.MEM
* X = hMem
*--------------------------------------
MEM.GetMemByNameYA
ldx MemMgr.LastSlot
beq .9
>STYA ZPMemMgrSrcPtr save BINPATH
>LDYAI MemMgr.Table
>STYA ZPMemMgrTmp1
ldx #0
.1 lda (ZPMemMgrTmp1)
bpl .6 In Use?
ldy #S.MEM.BIN any BIN PATH in this slot?
lda (ZPMemMgrTmp1),y
beq .6
jsr K.GetMemPtrA get pathname
>STYA ZPMemMgrDstPtr
lda (ZPMemMgrSrcPtr)
cmp (ZPMemMgrDstPtr)
bne .6
tay
.2 lda (ZPMemMgrSrcPtr),y
cmp (ZPMemMgrDstPtr),y
bne .6
dey
bne .2
>LDYA ZPMemMgrTmp1
clc
rts
.6 lda ZPMemMgrTmp1
clc
adc #S.MEM
sta ZPMemMgrTmp1
bcc .7
inc ZPMemMgrTmp1+1
.7 inx
cpx MemMgr.LastSlot
bne .1
.9 sec
rts
*--------------------------------------
MEM.GarbageCollector
clc
rts
*--------------------------------------
MAN
SAVE SYS/KERNEL.S.MEM
LOAD SYS/KERNEL.S
ASM