A2osX/DRV/GRAPPLERP.DRV.S.txt
2022-11-02 07:54:30 +01:00

308 lines
5.8 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

NEW
AUTO 3,1
.LIST OFF
.OP 65C02
.OR $2000
.TF drv/grapplerp.drv
*--------------------------------------
.INB inc/macros.i
.INB inc/a2osx.i
.INB inc/mli.e.i
.INB inc/com.i
*--------------------------------------
ZPTmpPtr1 .EQ ZPDRV
*--------------------------------------
* File Header (16 Bytes)
*--------------------------------------
CS.START cld
jmp Dev.Detect cld,jmp abs=DRV
.DA #$61 6502,Level 1 (65c02)
.DA #1 DRV Layout Version 1
.DA 0
.DA CS.END-CS.START Code Length
.DA 0
.DA #32 SS
.DA #2 ZP
.DA 0
*--------------------------------------
* Relocation Table
*--------------------------------------
L.MSG.DETECT .DA MSG.DETECT
L.MSG.DETECT.OK .DA MSG.DETECT.OK
L.MSG.DETECT.KO .DA MSG.DETECT.KO
L.DRV.CS.START .DA DRV.CS.START
L.FD.DEV .DA FD.DEV
L.FD.DEV.NAME .DA FD.DEV.NAME
.DA 0 End Of Reloc Table
*--------------------------------------
Dev.Detect >STYA ARGS
>LDYA L.MSG.DETECT
>SYSCALL PutS
stz ZPTmpPtr1
lda #$C1
sta ZPTmpPtr1+1
.1 and #$0f
tay
lda A2osX.S,y
bne .3
ldx #DEVSIG.Length-1
.2 ldy DEVSIG.Offset,x
lda (ZPTmpPtr1),y
cmp DEVSIG.Value,x
bne .3
dex
bpl .2
bra .4
.3 inc FD.DEV.NAME+3
inc ZPTmpPtr1+1 no match, try next slot....
lda ZPTmpPtr1+1
cmp #$C8
bne .1
>LDYA L.MSG.DETECT.KO
>SYSCALL PutS
lda #MLI.E.NODEV Not Found in any slot, exiting
sec
rts
.4 lda ZPTmpPtr1+1
and #$0F
pha
tay
lda #A2osX.S.COM
sta A2osX.S,y
pla
asl
asl
asl
asl
sta DEVSLOTn0
.8 >PUSHW L.MSG.DETECT.OK
>PUSHW L.FD.DEV.NAME
>PUSHBI 2
>SYSCALL PrintF
>PUSHWI DRV.END
>PUSHWI DRV.CS.END-DRV.CS.START
>PUSHWI DRV.CS.START
>LDYA L.DRV.CS.START
>SYSCALL InsDrv
bcs .9
>STYA FD.DEV+S.FD.DEV.DRVPTR
>PUSHW L.FD.DEV
>PUSHW L.FD.DEV.NAME
>SYSCALL MKDev
.9 rts
*--------------------------------------
CS.END
DEVSIG.Offset .HS 05070B0C
DEVSIG.Value .HS 38180114
DEVSIG.Length .EQ DEVSIG.Value-DEVSIG.Offset
MSG.DETECT .CZ "Orange Grappler Series // Boards"
MSG.DETECT.OK .CZ "Installed As Device : %s\r\n"
MSG.DETECT.KO .CZ "No HW Found."
ARGS .BS 2
*--------------------------------------
FD.DEV .DA #S.FD.T.CDEV
.DA #0 HANDLER
.DA #0 BUSID
.DA #0 DEVID
.DA 0 BUSPTR
.BS 2 DRVPTR
.DA 0 DCBPTR
.DA 0 BUFPTR
FD.DEV.NAME .AZ "lpt1"
*--------------------------------------
* Driver Code
*--------------------------------------
GRAPPLER.WDATA .EQ $C080
GRAPPLER.STATUS .EQ $C080
GRAPPLER.STATUS.IRQ .EQ %10000000
GRAPPLER.STATUS.NOPAPER .EQ %00000100
GRAPPLER.STATUS.SELECT .EQ %00000010
GRAPPLER.STATUS.BUSY .EQ %00000001
GRAPPLER.IRQR .EQ $C082
GRAPPLER.IRQEN .EQ $C084
*--------------------------------------
ZPIOCTL .EQ ZPDRV
ZPBufPtr .EQ ZPDRV+2
ZPCount .EQ ZPDRV+4
*--------------------------------------
DRV.CS.START cld
jmp (.1,x)
.1 .DA STATUS
.DA A2osX.BADCALL
.DA A2osX.BADCALL
.DA A2osX.BADCALL
.DA CONTROL
.DA A2osX.BADCALL
.DA OPEN
.DA CLOSE
.DA READ
.DA WRITE
.DA 0 end or relocation
*--------------------------------------
STATUS jsr STATUS.CONTROL.Init
ldy #S.IOCTL.S
lda (ZPIOCTL),y
beq .1
cmp #S.IOCTL.S.GETDIB
bne STATUS.DCB
ldy #S.DIB-1
.HS 2C bit abs
.1 ldy #3
.2 lda DIB,y
sta (ZPBufPtr),y
dey
bpl .2
clc
rts
STATUS.DCB cmp #S.IOCTL.S.GETDCB
bne .3
ldy #S.DCB.COM-1
.2 lda DCB,y
sta (ZPBufPtr),y
dey
bpl .2
clc
rts
.3 cmp #S.IOCTL.S.EOF
bne STATUS.9
lda DIB+S.DIB.S
and #S.DIB.S.OPENED
beq OPEN.E
.8 clc
rts
STATUS.9 lda #MLI.E.BADCTL
sec
rts
*--------------------------------------
CONTROL jsr STATUS.CONTROL.Init
ldy #S.IOCTL.C
lda (ZPIOCTL),y
cmp #S.IOCTL.C.SETDCB
bne STATUS.9
ldy #S.DCB.COM-1
.2 lda (ZPBufPtr),y
sta DCB,y
dey
bpl .2
*--------------------------------------
OPEN lda DIB+S.DIB.S
bit #S.DIB.S.OPENED
beq OPEN.1
OPEN.E lda #MLI.E.OPEN
sec
rts
OPEN.1 lda #S.DIB.S.OPENED
tsb DIB+S.DIB.S
clc
rts
*--------------------------------------
CLOSE lda #S.DIB.S.OPENED
trb DIB+S.DIB.S
clc
rts
*--------------------------------------
READ jsr READ.WRITE.Init
clc
rts
*--------------------------------------
WRITE jsr READ.WRITE.Init
.1 inc ZPCount
bne .2
inc ZPCount+1
beq .8
.2 lda (ZPBufPtr)
inc ZPBufPtr
bne .3
inc ZPBufPtr+1
.3 sta GRAPPLER.WDATA,x
bra .1
.8 clc
rts
*--------------------------------------
READ.WRITE.Init ldx DEVSLOTn0
STATUS.CONTROL.Init
>STYA ZPIOCTL
ldy #S.IOCTL.BUFPTR
lda (ZPIOCTL),y
sta ZPBufPtr
iny
lda (ZPIOCTL),y
sta ZPBufPtr+1
iny #S.IOCTL.BYTECNT
lda (ZPIOCTL),y
eor #$ff
sta ZPCount
iny
lda (ZPIOCTL),y
eor #$ff
sta ZPCount+1
rts
*--------------------------------------
DRV.CS.END
*DEVSLOT0n .BS 1
*DEVSLOTCn .BS 1
DEVSLOTn0 .BS 1
*--------------------------------------
DIB .DA #S.DIB.S.WRITE+S.DIB.S.READ
.DA #0,#0,#0
.PS "Grappler+ // Crd"
.DA #S.DIB.T.CHAR
.DA #0
.DA 00
*--------------------------------------
DCB .DA #S.DCB.T.COM
.DA #0 FLAGS
.DA 0
.DA #0
.DA #0
.DA #0
.DA #0
*--------------------------------------
DRV.END
MAN
SAVE usr/src/drv/grapplerp.drv.s
ASM