A2osX/DRV/UTHERNET2.DRV.S.txt

415 lines
7.9 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

PR#3
PREFIX /A2OSX.SRC
NEW
INC 1
AUTO 6
.LIST OFF
.OP 65C02
.OR $2000
.TF /A2OSX.BOOT/DRV/UTHERNET2.DRV
*--------------------------------------
.INB /A2OSX.DEV/INC/MACROS.I
.INB /A2OSX.DEV/INC/A2OSX.I
.INB /A2OSX.DEV/INC/NET.I
.INB /A2OSX.DEV/INC/NET.W5100.I
.INB /A2OSX.DEV/INC/LIBTCPIP.I
*--------------------------------------
ZPTmpPTR .EQ ZPDRV
*--------------------------------------
* File Header (16 Bytes)
*--------------------------------------
CS.START cld
jmp Dev.Detect cld,jmp abs=DRV
.DA #$61 6502,Level 1 (65c02)
.DA #1 DRV Layout Version 1
.DA 0
.DA CS.END-CS.START Code Length
.DA DEV.HEADER-CS.START Device Header Offset
.DA DRV.CS.START-CS.START Driver Code Offset
.DA DRV.CS.END-DRV.CS.START Drv Code Length
*--------------------------------------
* Relocation Table
*--------------------------------------
L.MSG.DETECT .DA MSG.DETECT
L.MSG.DETECT.OK .DA MSG.DETECT.OK
L.MSG.DETECT.KO .DA MSG.DETECT.KO
L.DEV.HEADER.NAME .DA DEV.HEADER.NAME
.DA 0 End Of Reloc Table
*--------------------------------------
Dev.Detect >STYA Args
>LDYA L.MSG.DETECT
>SYSCALL CPrintFYA
ldx #$70
.1 txa IO based detection, avoid scanning in Disk Controller IO!!!!
lsr
lsr
lsr
lsr
tay
lda A2osX.SLOTS,y
bne .2
lda #W5100.MR.RST
sta W5100.MR,x
lda #0
.10 dec give some time....
bne .10
lda #W5100.MR.AI+W5100.MR.IND
sta W5100.MR,x
pha
pla
lda W5100.MR,x
cmp #W5100.MR.AI+W5100.MR.IND
bne .2
>AR.SELECT RTR Double Check with RTR default value...
lda W5100.DR,x Get RTR HI
cmp /2000
bne .2
lda W5100.DR,x Get RTR LO
cmp #2000
beq .3
.2 dec DEV.HEADER.NAME+4
txa
sec
sbc #$10
tax
bne .1
>LDYA L.MSG.DETECT.KO
>SYSCALL CPrintFYA
lda #$28 MLI.ERR.NODEV
sec
rts
.3 stx DEVSLOTx0
txa
lsr
lsr
lsr
lsr
tay
lda #A2osX.SLOTS.NET
sta A2osX.SLOTS,y
>LDYA ARGS
>STYA ZPTmpPTR
lda (ZPTmpPTR)
bne .4
lda #$00
sta MAC
lda #$08
sta MAC+1
lda #$DC
sta MAC+2
lda A2osX.RANDOM16
eor A2osX.TIMER16
sta MAC+3
eor A2osX.RANDOM16+1
sta MAC+4
eor A2osX.TIMER16+1
sta MAC+5
bra .8
.4 jsr DecodeMac
bcc .8
lda #DEVMGR.ERRICL
sec
rts
.8 >PUSHW L.DEV.HEADER.NAME
>LDYA L.MSG.DETECT.OK
>SYSCALL CPrintFYA
clc
rts
*--------------------------------------
.INB DRV/X.NET.DRV.S
*--------------------------------------
CS.END
MSG.DETECT >CSTR "UtherNet2/W5100 Driver.\r\n"
MSG.DETECT.OK >CSTR "UtherNet2/W5100 Installed As Device : %S\r\n"
MSG.DETECT.KO >CSTR "Hardware Not Found.\r\n"
Args .BS 2
*--------------------------------------
* Device Header (16 Bytes)
*--------------------------------------
DEV.HEADER cld
jmp (DRV.CS.START,x)
.DA #0
.BS 6
DEV.HEADER.NAME >PSTR "ETH7" NAME
*--------------------------------------
* Driver Code
*--------------------------------------
DRV.CS.START .DA STATUS
.DA READBLOCK
.DA WRITEBLOCK
.DA BADCALL
.DA BADCALL
.DA BADCALL
.DA OPEN
.DA CLOSE
.DA BADCALL
.DA BADCALL
L.DEVSTAT .DA DEVSTAT
.DA 0 end or relocation
*--------------------------------------
BADCALL lda #1 MLI.ERR.BADCALL
sec
rts
*--------------------------------------
STATUS >LDYA L.DEVSTAT
clc
rts
*--------------------------------------
READBLOCK ldx DEVSLOTx0
>AR.SELECT S0.RX.RSR
lda W5100.DR,x get the received size HI
ora W5100.DR,x LO
bne READBLOCK.RxOK
lda #ERR.DEV.NOFRAME
READBLOCK.Err sec
rts
READBLOCK.RxOK >AR.SELECT S0.RX.RD
lda W5100.DR,x get the received ptr HI
ldy W5100.DR,x get the received ptr LO
and /RXTX.MASK
ora /RX.BASE
sta W5100.AR,x
tya
sta W5100.AR+1,x
lda W5100.DR,x get RX.Size HI
sta Offset+1
>PUSHA for SYS.GetMem
tay
lda W5100.DR,x get RX.Size LO
sta Offset
>PUSHA for SYS.GetMem
sec
sbc #2
sta RXTX.Size
bcs .1
dey
.1 sty RXTX.Size+1
* >PUSHYA Already pushed....
>PUSHBI 0
>SYSCALL GetMem
bcs READBLOCK.Err
>STYA ZPTmpPTR
stx .8+1
sty .8+3
sta .8+5
lda RXTX.Size
sta (ZPTmpPTR)
eor #$ff
sta Counter
ldy #1
lda RXTX.Size+1
sta (ZPTmpPTR),y
eor #$ff
sta Counter+1
ldx DEVSLOTx0
iny
.2 inc Counter
bne .3
inc Counter+1
beq .4
.3 lda W5100.DR,x
sta (ZPTmpPTR),y
iny
bne .2
inc ZPTmpPTR+1
bne .2
.4 >AR.SELECT S0.RX.RD
ldy W5100.DR,x Get HI
lda W5100.DR,x Get LO
clc
adc Offset
pha save LO
tya
adc Offset+1
pha
>AR.SELECT S0.RX.RD
pla
sta W5100.DR,x write HI
pla
sta W5100.DR,x write LO
>AR.SELECT S0.CR
lda #$40 RECV
sta W5100.DR,x
.8 ldx #$ff hMem
ldy #$ff PtrLO
lda #$ff PtrHI
clc
rts
*--------------------------------------
WRITEBLOCK >PULLW ZPTmpPTR
lda (ZPTmpPTR)
sta RXTX.Size
eor #$ff
sta Counter
ldy #1
lda (ZPTmpPTR),y
sta RXTX.Size+1
eor #$ff
sta Counter+1
ldx DEVSLOTx0
>AR.SELECT S0.TX.FSR
lda W5100.DR,x get send size HI
ldy W5100.DR,x LO
cpy RXTX.Size
sbc RXTX.Size+1
bcs WRITEBLOCK.1
lda #ERR.DEV.NOBUFFER
sec
rts
WRITEBLOCK.1 ldy #S.ETH.SRCMAC+5
ldx #5
.1 lda MAC,x
sta (ZPTmpPTR),y
dey
dex
bpl .1
ldx DEVSLOTx0
>AR.SELECT S0.TX.WR
lda W5100.DR,x Get HI
ldy W5100.DR,x Get LO
and /RXTX.MASK
ora /TX.BASE
sta W5100.AR,x Write HI
sta Offset+1
tya
sta W5100.AR+1,x Write LO
sta Offset
ldy #2
.2 inc Counter
bne .3
inc Counter+1
beq .4
.3 lda (ZPTmpPTR),y
sta W5100.DR,x
iny
bne .2
inc ZPTmpPTR+1
bne .2
.4 >AR.SELECT S0.TX.WR
clc
lda Offset
adc RXTX.Size
pha save LO
lda Offset+1
adc RXTX.Size+1
* and /RXTX.MASK
* ora /TX.BASE
sta W5100.DR,x write HI
pla
sta W5100.DR,x write LO
>AR.SELECT S0.CR
lda #$20 SEND
sta W5100.DR,x
clc
rts
*--------------------------------------
OPEN jsr CLOSE
lda #W5100.MR.AI+W5100.MR.IND
sta W5100.MR,x
>AR.SELECT SHAR
ldy #0
.1 lda MAC,y
sta W5100.DR,x
iny
cpy #6
bne .1
>AR.SELECT RMSR
lda #3 8k,0k,0k,0k
sta W5100.DR,x ...for Socket RX Buffers
sta W5100.DR,x ...for Socket TX Buffers
>AR.SELECT S0.MR
lda #W5100.AR.S0.MR.MACRAW+W5100.AR.S0.MR.MF
sta W5100.DR,x
>AR.SELECT S0.CR
lda #1 OPEN
sta W5100.DR,x
clc
rts
*--------------------------------------
CLOSE ldx DEVSLOTx0
lda #W5100.MR.RST
sta W5100.MR,x
clc
rts
*--------------------------------------
DRV.CS.END
DEVSLOTx0 .BS 1
RXTX.Size .BS 2
Counter .BS 2
Offset .BS 2
*--------------------------------------
DEVSTAT .DA #S.DEV.S.BLOCK+S.DEV.S.WRITE+S.DEV.S.READ
.BS 3 size
>PSTR "UtherNetII/W5100"
.DA #S.DEVSTAT.TYPE.NET
.BS 1 Subtype
.BS 2 Version
*--------------------------------------
FLAGS .DA #0
LINK.STATUS .DA #S.DEVSTAT.NET.STATUS.OK+S.DEVSTAT.NET.STATUS.FD+S.DEVSTAT.NET.STATUS.100
MAC .BS 6
MAN
SAVE DRV/UTHERNET2.DRV.S
ASM