AppleIIAsm-Collection/disks/disk6_fileio/T.FILEIO.DEMO

276 lines
5.9 KiB
Plaintext
Raw Normal View History

*
********************************
* *
* -< FILEIO DEMO >- *
* *
* VERSION 00.00.01 *
* *
* 03/04/1980 *
* *
********************************
* *
* NATHAN D. RIGGS *
* NATHAN.RIGGS@OUTLOOK.COM *
* *
********************************
*
** ASSEMBLER DIRECTIVES
*
CYC AVE
EXP ONLY
DSK FILEIO.DEMO
*
*``````````````````````````````*
* TOP INCLUDES (PUTS, MACROS) *
*,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,*
*
PUT DECS
USE FILEIO.MAC
*
PUT FILEIO.HOOKS
*
OBJ $BFE0
ORG $6000
*
*``````````````````````````````*
* PROGRAM MAIN BODY *
*,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,*
*
*
*
** BIG LUMPS -- HIGH LEVEL CODE
*
*
*
*
** PUT A FEW VALUES AT $300 TO PROVE
** BSAVING AND BLOADING
*
LDA #0
STA $300
LDA #1
STA $301
LDA #2
STA $302
LDA #3
STA $303
*
*
** BSAVE DOES A DOS BINARY SAVE WITH THE
** COMMAND LINE PARAMETERS STORED IN THE
** STRING CONTAINED AT THE SPECIFIED ADDRESS.
*
** FOR INSTANCE, IF THE STRING CONTAINS:
** TEST,A$300,L$100
** SPCIFYING THE NAME OF THE FILE, THE ADDRESS
** OFF THE MEMORY TO STORE, AND THE LENGTH
** TO SAVE, THE BSAVE ROUTINE WILL EXECUTE
** THE COMMAND: BSAVE TEST,A$300,L$100
*
** MACRO: _BSAV TESTSTR
*
LDA #>TESTSTR
PHA
LDA #<TESTSTR
PHA
JSR BSAVE
*
** NOW CLEAR THE 1,2,3 STORED IN $300 TO
** SHOW THAT IT WAS LOADED AGAIN
*
LDA #0
STA $300
STA $301
STA $302
STA $303
*
** BLOAD SIMPLY BLOADS PREVIOUSLY BSAVED DATA
** INTO THE SPECIFIED ADDRESS IN THE STRING
*
** MACRO: _BLOD TESTLD
*
LDA #>TESTLD
PHA
LDA #<TESTLD
PHA
JSR BLOAD
*
*
** CMD SIMPLY RUNS A DOS COMMAND. THIS CAN BE USED
** TO READ AND WRITE TEXT FILES, BUT THAT REQUIRES
** AN EXTRA STEP (SEE BELOW). OTHERWISE, IT'S JUST
** A MATTER OF CALLING THE SUBROUTINE, THEN HAVING
** AN ASC THAT FOLLOWS WITH THE DOS COMMAND.
*
** MACRO: _CMD "CATALOG"
*
JSR CMD
ASC "CATALOG"
HEX 8D00
*
*
** TO ACCESS TEXT FILES, WE HAVE TO GO INTO
** INDIRECT MODE TO FOOL DOS INTO THINKING A
** PROGRAM IS RUNNING. THE CAVEAT IS THAT WE
** MUST JUMP TO 3D0 (REENTRY) TO TERMINTE THE
** PROGRAM INSTEAD OF USING RTS. THIS IS THE
** SAME ISSUE WHEN USING COUT, HOWEVER, SO IT
** IS PRETTY STANDARD.
*
** MACRO: _TMOD
*
JSR TMODE ; ENTER TEXT OPERATION MODE
*
*
** NOW LET'S WRITE A TEXT FILE USING A MIX
** OF CMD AND THE FPRINT COMMAND
*
** MACRO: _FPRN "THIS IS A TEST."
*
JSR CMD
ASC "OPEN TEXT1"
HEX 8D00
JSR CMD
ASC "WRITE TEXT1"
HEX 8D00
JSR FPRINT
ASC "THIS IS A TEST."
HEX 8D00
JSR CMD
ASC "CLOSE TEXT1"
HEX 8D00
*
*
** NOW LET'S READ THAT FILE WITH FINPUT, WHICH
** SIMPLY USES THE MONITOR INPUT ROUTINE AND THEN
** COPIES THE BUFFER TO THE SPECIFIED LOCATION.
** YOU CAN ALSO USE FGET, WHICH STORES A SINGLE
** CHARACTER FROM THE FILE INTO THE ACCUMULATOR.
*
** MACRO: _FINP $300
*
JSR CMD
ASC "OPEN TEXT1"
HEX 8D00
JSR CMD
ASC "READ TEXT1"
HEX 8D00
LDA #>$300 ; PUT READ STRING HERE
PHA
LDA #<$300
PHA
JSR FINPUT
JSR CMD
ASC "CLOSE TEXT1"
HEX 8D00
*
*
** FPSTR WRITES A STRING TO A TEXT FILE
** THAT RESIDES IN A SPECIFIC ADDRESS.
*
** MACRO: _FPRN TSTR
*
JSR CMD
ASC "OPEN T.TEST"
HEX 8D00
JSR CMD
ASC "WRITE T.TEST"
HEX 8D00
LDA #>TSTR
PHA
LDA #<TSTR
PHA
JSR FPSTR
JSR CMD
ASC "CLOSE T.TEST"
HEX 8D00
*
** _FGET SIMPLY GETS A SINGLE CHARACTER FROM
** THE GIVEN FILE AND STORES IT IN THE
** ACCUMULATOR.
*
_CMD "OPEN T.TEST"
_CMD "READ T.TEST"
_FGET
_CMD "CLOSE T.TEST"
*
*
********************************
********************************
********************************
********************************
* *
* D A N G E R D A N G E R *
* *
********************************
********************************
********************************
********************************
*
** THE FOLLOWING CODE DOES LOW
** LEVEL DISK ACCESS, WHICH COULD
** SERIOUSLY CORRUPT YOUR DISK.
*
** MAKE SURE YOU USE THESE ROUTINES
** ONLY WHEN YOU HAVE BACKUPS AND
** KNOW WHAT YOU'RE DOING!
*
*
** _SLOT SETS THE SLOT FOR RWTS
** LOW-LEVEL DISK OPERATIONS.
** THERE IS NO ACTUAL ROUTINE FOR
** THIS IN THE LIBRARY; IT ONLY EXISTS
** AS A MACRO.
*
_SLOT #6
*
** THE REST OF THE COMMANDS UP UNTIL
** _RWTS FOLLOW A SIMILAR PATTERN, AND ALL
** CHANGE THE IOB TABLE.
*
*
_DRIV #2 ; CHANGE DRIVE
*
_COMM #1 ; SET FOR READ
*
_DBUF $1000 ; DISK BUFFER AREA
*
_TRAK #2 ; SET TRACK
_SECT #2 ; SET SECTOR
*
_RWTS
BRK
*
** THE PRECEDING READS FROM TRACK 2, SECTOR 2
** OF DRIVE 2 IN SLOT 6, AND COPIES IT TO $1000.
*
** THERE ARE PLENTY OF OTHER USES HERE, BUT FOR
** THE SAKE OF SAFETY, WE WON'T BE SHOWING ANY
** DISK WRITE OPERATIONS. HOWEVER, THERE WILL BE A
** DISK DEDICATED TO THIS IN THE FUTURE, BUT WITHOUT
** THE SOURCE CODE ON IT.
*
*
*
** LITTLE LUMPS -- MID/LOW LEVEL
*
*
JMP REENTRY
*
** DATA
*
TESTSTR STR "TEST,A$300,L$100"
TESTLD STR "TEST,A$300"
TSTR STR "COMMUNISM WILL WIN!"
*
*
*``````````````````````````````*
* BOTTOM INCLUDES *
*,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,*
*
*
** BOTTOM INCLUDES
*
PUT FILEIO.LIB
*