a2d/mgtk.inc
2018-01-29 08:38:23 -08:00

615 lines
20 KiB
PHP

;;; ==================================================
;;; Mouse Graphics Tool Kit (w/ Graphics Primitives)
;;; ==================================================
.scope MGTK
MLI := $4000
;; MLI-style call (jsr MLI ; .byte call ; .addr params)
;; Call from AUX (RAMRDON/RAMWRTON)
;;; ==================================================
;;; Graphics Primitives
;;; ==================================================
NoOp := $00 ; No-op
;; (input length 0 bytes)
;;; --------------------------------------------------
;;; Initialization Commands
InitGraf := $01
SetSwitches := $02 ; Configure display switches
;; (input length 1 byte)
;; Turns on 80 col/DHR, and then:
;; bit 0: LoRes if clear, HiRes if set
;; bit 1: Page 1 if clear, Page 2 if set
;; bit 2: Full screen if clear, split screen if set
;; bit 3: Graphics if clear, text if set
;;; --------------------------------------------------
;;; GrafPort Commands
InitPort := $03 ; Get screen state
;; (input length 0 bytes)
;; (output length 36 bytes)
;; .word viewloc x
;; .word viewloc y
;; .addr mapbits screen_mapbits
;; .word mapwidth screen_mapwidth
;; .word maprect_x1
;; .word maprect_y1
;; .word maprect_x2 560-1
;; .word maprect_y2 192-1
;; .res 8 pattern
;; .byte mskand AND mask, default $FF
;; .byte mskor ORA mask, default $00
;; .word xpos
;; .word ypos
;; .byte penwidth horizontal pen thickness
;; .byte penheight vertical pen thickness
;; .byte penmode
;; .byte textback text background
;; .addr textfont
SetPort := $04 ; Set full drawing state
;; (input length 36 bytes)
;; .word left pixels from screen edge
;; .word top
;; .addr mapbits screen_mapbits
;; .word mapwidth screen_mapwidth
;; .word maprect_x1 pixels scrolled
;; .word maprect_y1
;; .word maprect_x2 pixels
;; .word maprect_y2
;; .res 8 pattern
;; .byte mskand AND mask, default $FF
;; .byte mskor ORA mask, default $00
;; .word xpos
;; .word ypos
;; .byte penwidth horizontal pen thickness
;; .byte penheight vertical pen thickness
;; .byte penmode
;; .byte textback text background
;; .addr textfont
GetPort := $05 ; Get pointer to current grafport
;; (input length 0 bytes)
;; (output length 2 bytes)
;; .addr port (out)
SetPortBits := $06 ; Set just the drawing port, subset of full state
;; (input length 16 bytes)
;; .word left pixels from screen edge
;; .word top
;; .addr mapbits screen_mapbits ($2000)
;; .word mapwidth screen_mapwidth ($80)
;; .word maprect_x1
;; .word maprect_y1
;; .word maprect_x2
;; .word maprect_y2
SetPenMode := $07 ; Set the current pen mode
;; (input length 1 byte)
;; .byte mode (>=4 also sets eor mask to $7f)
;; 0 = white (???)
;; 2 = black (???)
SetPattern := $08 ; Set the current pattern
;; (input length 8 bytes)
;; .res 8 pattern 8x8 pixel pattern for PaintRect calls
SetColorMasks := $09 ; Set the current color masks
;; (input length 2 bytes)
;; .byte mskand
;; .byte mskor
SetPenSize := $0A ; Set the current pen size
;; (input length 2 bytes)
;; .byte penwidth horizontal pen thickness
;; .byte penheight vertical pen thickness
SetFont := $0B ; Set the current font
;; (input length 2 bytes)
;; .addr textfont font definition (see below)
SetTextBG := $0C ; Set the current text background
;; (input length 1 byte)
;; .byte mask
;;; --------------------------------------------------
;;; Drawing Commands
Move := $0D ; Adjust start of subsequent DRAW_TEXT, DRAW_LINE
;; (input length 4 bytes)
;; .word xdelta
;; .word ydelta
MoveTo := $0E ; Start of subsequent DRAW_TEXT, DRAW_LINE
;; (input length 4 bytes)
;; .word xcoord
;; .word ycoord
Line := $0F ; Draw line (from SET_POS)
;; (input length 4 bytes)
;; .word xdelta signed, delta in pixels
;; .word ydelta
LineTo := $10 ; Draw line (from SET_POS)
;; (input length 4 bytes)
;; .word xcoord end coords in pixels
;; .word ycoord
PaintRect := $11 ; Fill rectangle with selected simple pattern/thickness
;; (input length 8 bytes)
;; .word left (includes scroll pos)
;; .word top
;; .word right pixels
;; .word bottom
FrameRect := $12 ; Draw rectangle with selected simple pattern/thickness
;; (input length 8 bytes)
;; .word left pixels
;; .word top
;; .word right
;; .word bottom
InRect := $13 ; Is pos (via SET_POS) in bounds? Returns true/false in A
;; (input length 8 bytes)
;; .word left
;; .word top
;; .word right
;; .word bottom
PaintBits := $14 ; Draw pattern
;; (input length 16 bytes)
;; .word left
;; .word top
;; .addr bitmap bitmap is 7 bits per byte, 0 = black, 1 = white
;; .byte stride bitmap width in bytes
;; .byte 0 ???
;; .word x1 offset within bitmap definition (pixels)
;; .word y1
;; .word x2
;; .word y2
PaintPoly := $15
;; (input length 0 bytes)
FramePoly := $16 ; Draw multiple closed polygons
;; (input length 0 bytes)
;; Address points at struct:
;; .byte points count
;; .byte flag high bit clear if this is last polygon, set if not
;; .word x1, y1
;; .word x2, y2
;; ...
InPoly := $17
;; (input length 0 bytes)
;;; --------------------------------------------------
;;; Text Commands
TextWidth := $18 ; Measure the width of a string in pixels
;; (input length 3 bytes)
;; .addr data
;; .byte length
;; .word width result in pixels
DrawText := $19 ; Drawn at last SET_POS as left, baseline
;; (input length 3 bytes)
;; .addr data
;; .byte length
;;; --------------------------------------------------
;;; Utility Commands
SetZP1 := $1A ; Configure ZP usage by API (speed vs. convenience)
;; (input length 1 byte)
;; .byte flag (AWS_CZP_*; high bit set = preserve ZP during calls)
SetZP2 := $1B ; Stash or restore lower 128 bytes of ZP; calls are idempotent
;; (input length 1 byte)
;; .byte flag (high bit set = stash ZP, clear = unstash ZP)
Version := $1C ; ???
;;; ==================================================
;;; Mouse Graphics Tool Kit Calls
;;; ==================================================
;;; --------------------------------------------------
;;; Initialization Calls
StartDeskTop := $1D ; Inits state, registers interrupt handler, draws desktop
;; (input length 12 byte)
;; ???
StopDeskTop := $1E ; Deallocates interrupt, hides cursor
;; (no parameters; pass $0000 as address)
;;; $1F ???
SetUserHook := $20 ; Install mouse hook; A=0 on success, $95 if mouse disabled
;; NOTE: Doesn't set the internal flag - buggy ???
;; (input length 2 bytes)
;; (output length 2 bytes)
;; .addr hook Mouse hook routine to install
;; .addr mouse_state (out) Address of mouse state (.word x, y; .byte status)
ScaleMouse := $21 ; ???
KeyboardMouse := $22 ; ???
GetIntHandler := $23 ; Get address of interrupt handler
;; (input length 0)
;; (output length 2 bytes)
;; .addr handler (out) Address of interrupt handler (after cld)
;;; --------------------------------------------------
;;; Cursor Manager Calls
SetCursor := $24 ; Set cursor definition
;; (input not copied)
;; .res 24 bitmap 2x12 byte bitmap
;; .res 24 mask 2x12 byte mask
;; .byte hotx hotspot coords
;; .byte hoty
ShowCursor := $25 ; Return cursor to visibility
;; (no parameters; pass $0000 as address)
HideCursor := $26 ; Cursor hidden until ShowCursor call
;; (no parameters; pass $0000 as address)
ObscureCursor := $27 ; Cursor hidden until moved
;; (no parameters; pass $0000 as address)
GetCursorAddr := $28 ; Get cursor definition
;; (input length 0 bytes)
;; (output length 2 bytes)
;; .addr definition See SetCursor
;;; --------------------------------------------------
;;; Event Manager Calls
CheckEvents := $29 ; ???
GetEvent := $2A
;; (input length 0 bytes)
;; (output length 5 bytes)
;; .byte state
;; if state is key_down:
;; .byte key (ASCII code; high bit clear)
;; .byte modifiers (0=none, 1=open-apple, 2=closed-apple, 3=both)
;; if state otherwise:
;; .word xcoord
;; .word ycoord
FlushEvents := $2B
;; (no parameters; pass $0000 as address)
PeekEvent := $2C
;; (input length 0 bytes)
PostEvent := $2D ; Set pending input state (mouse or keyboard)
;; (input length 5 bytes)
;; .byte state
;; if state is key_down:
;; .byte key ASCII code; high bit clear
;; .byte modifiers 0=none, 1=open-apple, 2=closed-apple, 3=both
;; if state otherwise:
;; .word xcoord
;; .word ycoord
SetKeyEvent := $2E ; When set, keyboard is ignored in $29 calls
;; (input length 1 byte)
;; .byte flag high bit set = ignore keyboard, otherwise check
;;; --------------------------------------------------
;;; Menu Manager Calls
InitMenu := $2F
SetMenu := $30 ; Configure (and draw) menu
;; (input not copied)
;; .word count Number of top-level menus
;;
;; .word menu_id Menu identifier
;; .addr label Address of pascal (length-prefixed) string
;; .addr menu_defn Address of menu definition
;; .word 0,0,0 (overwritten with ???, left edge, right edge)
;; ...
;;
;; Menu definitions are:
;; .word count Number of items in menu
;; Menu items are:
;; .word 0,0 ???
;; .word has_shortcut 1 if has keyboard shortcuts, 0 otherwise
;; .byte shortcut1 ASCII code of shortcut #1 (e.g. uppercase B); or 0
;; .byte shortcut2 ASCII code of shortcut #2 (e.g. uppercase b, or same); or 0
;; .addr label Address of pascal (length-prefixed) string
;; or for a separator:
;; .word $40, $13, $0
MenuSelect := $31 ; Enter modal loop for handling mouse-down on menu bar
;; (input not copied)
;; (output 2 bytes)
;; .byte menu_id Top level menu identifier, or 0 if none
;; .byte item_num Index (1-based) of item in menu, or 0 if none
MenuKey := $32
HiliteMenu := $33
DisableMenu := $34
DisableItem := $35
CheckItem := $36
SetMark := $37
;;; --------------------------------------------------
;;; Window Manager Calls
OpenWindow := $38
;; (input not copied)
;; .byte id
;; .byte options option_*
;; .addr title
;; .byte hscroll scroll_option_*
;; .byte vscroll scroll_option_*
;; .byte hsmax
;; .byte hspos
;; .byte vsmax
;; .byte vspos
;; .byte ???
;; .byte ???
;; .word width_a ??? possibly size of scroll area within window of scroll area?
;; .word height_a ???
;; .word width_b (of scroll area?)
;; .word height_b (of scroll area?)
;; - next section is identical to that for SetPort
;; .word left pixels from screen edge
;; .word top
;; .word screen_addr
;; .word screen_stride
;; .word maprect_x1 pixels scrolled
;; .word maprect_y1
;; .word maprect_x2 pixels
;; .word maprect_y2
;; .res 8 pattern
;; .byte mskand AND mask, default $FF
;; .byte mskor ORA mask, default $00
;; .word xpos
;; .word ypos
;; .byte penwidth
;; .byte penheight
;; .byte 0 ??? fill mode?
;; .byte textback text background
;; .addr textfont
;; .addr next address of next lower window in stack (filled in by call)
CloseWindow := $39
;; (input length 1 byte)
;; .byte id
CloseAll := $3A
GetWinPtr := $3B ; Get pointer to window params by id; A=0 on success
;; (input length 1 byte)
;; (output length 3 bytes)
;; .byte id of window
;; .addr window (out) window params
GetWinPort := $3C ; get drawing state of window
;; (input length 3 bytes)
;; .byte id window
;; .addr port port definition to populate, like SetPort
SetWinPort := $3D ; Update port by passed window id
;; ** Implementation appears buggy - or maybe just really cryptic ??? **
;; (input length 2 bytes)
;; .byte id window
;; .byte ???
BeginUpdate := $3E
;; (input length 1 byte)
;; .byte id
EndUpdate := $3F
FindWindow := $40
;; (input length 4 bytes)
;; .word queryx relative to screen
;; .word queryy
;; .byte element (out) area_*
;; .byte id (out) of window
FrontWindow := $41 ; Get id of top window
;; (input length 0 bytes)
;; (output length 1 byte)
;; .byte id (out) window, or 0 if none
SelectWindow := $42 ; Make window topmost
;; (input length 1 byte)
;; .byte id window
TrackGoAway := $43
;; (input length 0 bytes)
;; .byte clicked (out) 0 = cancelled, 1 = clicked
;; .byte ?? (out)
;; .byte ?? (out)
DragWindow := $44
;; (input length 5 bytes)
;; .byte id window
;; .word xcoord mouse coords
;; .word ycoord
;; .byte moved high bit set if moved, clear if not
GrowWindow := $45
;; (input length 5 bytes)
;; .byte id window
;; .word xcoord mouse coords
;; .word ycoord
;; .byte ?? likely: moved? 0 = no change, 1 = moved
ScreenToWindow := $46 ; Map screen coords to client coords
;; (input length 5 bytes)
;; .byte window_id
;; .word screenx
;; .word screeny
;; .word clientx
;; .word clienty
WindowToScreen := $47
;;; --------------------------------------------------
;;; Control Manager Calls
FindControl := $48
;; (input length 4 bytes)
;; .word xcoord
;; .word ycoord
;; .byte part ctl_*
;; .byte scroll part_*
SetCtlMax := $49 ; ???
;; (input length 3 bytes)
;; .byte ??? maybe part (i.e. HSCROLL or VSCROLL) ???
;; .byte ??? width fraction ??
;; .byte ???
TrackThumb := $4A
;; (input length 5 bytes)
;; .byte type ctl_horizontal_scroll_bar or ctl_vertical_scroll_bar
;; .word mouse xcoord
;; .word mouse ycoord
;; .byte position 0...255
;; .byte moved 0 = no change, 1 = moved
UpdateThumb := $4B
;; (input length 3 bytes)
;; .byte type ctl_horizontal_scroll_bar or ctl_vertical_scroll_bar
;; .byte pos new position 0...250
;; .byte ???
ActivateCtl := $4C ; ???
;;; $4E is last call
;;; ==================================================
;;; Graphics Primitives Constants
;;; Used in GetWinPort / SetPortBits
screen_mapbits := $2000 ; Screen address
screen_mapwidth := $80 ; Stride in bytes
;;; Used in SetPenMode
pencopy := 0
notpenXOR := 6
;;; Used in SetZP1
zp_overwrite := 0
zp_preserve := 1<<7
;;; Used in various state blocks
colormask_and := $FF
colormask_or := $00
textbg_white := $7F
;;; ==================================================
;;; Mouse Graphics Tool Kit Constants
;;; Used in GetEvent
no_event := 0 ; No mouse or keypress
button_down := 1 ; Mouse button was depressed
button_up := 2 ; Mouse button was released
key_down := 3 ; Key was pressed
drag := 4 ; Mouse button still down
apple_key := 5 ; Mouse button was depressed, modifier key down
;;; Used in FindWindow
area_desktop := 0
area_menubar := 1
area_content := 2 ; Includes scroll bars
area_dragbar := 3
area_grow_box := 4
area_close_box := 5
;;; Used in FindControl, TrackThumb, UpdateThumb
ctl_not_a_control := 0
ctl_vertical_scroll_bar := 1
ctl_horizontal_scroll_bar := 2
;;; Used in FindControl
part_up_arrow := 1
part_left_arrow := 1
part_down_arrow := 2
part_right_arrow := 2
part_page_up := 3
part_page_left := 3
part_page_down := 4
part_page_right := 4
part_thumb := 5
;;; Used in OpenWindow
option_dialog_box := 1 << 0
option_go_away_box := 1 << 1
option_grow_box := 1 << 2
scroll_option_none := 0
scroll_option_present := 1 << 7
scroll_option_thumb := 1 << 6
scroll_option_active := 1 << 0
scroll_option_normal := scroll_option_present | scroll_option_thumb | scroll_option_active
.endscope ; MGTK
;;; ==================================================
;;; Macros
;;; Call an MGTK entry point:
;;; MGTK_CALL n - params is $0000
;;; MGTK_CALL n, params_addr
;;; MGTK_CALL m, params_addr, label - params_addr is labeled for modifying
.macro MGTK_CALL op, addr, label
jsr MGTK::MLI
.byte op
.if .paramcount > 2
label := *
.endif
.if .paramcount > 1
.addr addr
.else
.addr 0
.endif
.endmacro
;;; ------------------------------------
.macro DEFINE_STRING str, label ; String definition, for use with TextWidth/DrawText
.local data ; Call as DEFINE_STRING "abc"
.local end ; Can include control chars by using:
.addr data ; DEFINE_STRING {"abc",$0D,"def"}
.if .paramcount > 1
label:
.endif
.byte end - data
data: .byte str
end:
.endmacro
;;; Define pattern for PaintBits - low 7 bits are reversed
;;; e.g. .byte px(%1000000)
;;; px() has high bit clear, PX() has high bit set
.define px(bits) (((bits&$40)>>6)|((bits&$20)>>4)|((bits&$10)>>2)|(bits&$8)|((bits&$4)<<2)|((bits&$2)<<4)|((bits&$1)<<6))
.define PX(bits) (((bits&$40)>>6)|((bits&$20)>>4)|((bits&$10)>>2)|(bits&$8)|((bits&$4)<<2)|((bits&$2)<<4)|((bits&$1)<<6)|$80)