Apple-2-SW/a2d
1
0
Fork 0
mirror of https://github.com/mi57730/a2d.git synced 2024-11-29 07:49:20 +00:00
Code Issues Projects Releases Wiki Activity
a708a51eab
a2d/desk.acc/show.text.file.s
Joshua Bell adbd1c8fc7 disasm: block copy macros, rename pointers
2018-12-08 09:56:47 -08:00

1428 lines
36 KiB
ArmAsm
Raw Blame History

.setcpu "6502"
.include "apple2.inc"
.include "../inc/apple2.inc"
.include "../inc/prodos.inc"
.include "../mgtk.inc"
.include "../desktop.inc"
.include "../macros.inc"
;;; ============================================================
.org $800
dummy1000 := $1000
start: jmp copy2aux
save_stack:.byte 0
;;; Copy $800 through $13FF (the DA) to aux
.proc copy2aux
tsx
stx save_stack
sta RAMWRTON
ldy #0
src: lda start,y ; self-modified
dst: sta start,y ; self-modified
dey
bne src
sta RAMWRTOFF
inc src+2
inc dst+2
sta RAMWRTON
lda dst+2
cmp #$14
bne src
.endproc
call_main_trampoline := $20 ; installed on ZP, turns off auxmem and calls...
call_main_addr := call_main_trampoline+7 ; address patched in here
;;; Copy the following "call_main_template" routine to $20
.scope
sta RAMWRTON
sta RAMRDON
COPY_BYTES sizeof_call_main_template+1, call_main_template, call_main_trampoline
jmp call_init
.endscope
.proc call_main_template
sta RAMRDOFF
sta RAMWRTOFF
jsr dummy1000 ; overwritten (in zp version)
sta RAMRDON
sta RAMWRTON
rts
.endproc
sizeof_call_main_template := * - call_main_template
.proc call_init
;; run the DA
jsr init
;; tear down/exit
sta ALTZPON
lda LCBANK1
lda LCBANK1
sta RAMRDOFF
sta RAMWRTOFF
ldx save_stack
txs
rts
.endproc
;;; ============================================================
;;; ProDOS MLI calls
.proc open_file
jsr copy_params_aux_to_main
sta ALTZPOFF
MLI_CALL OPEN, open_params
sta ALTZPON
jsr copy_params_main_to_aux
rts
.endproc
.proc read_file
jsr copy_params_aux_to_main
sta ALTZPOFF
MLI_CALL READ, read_params
sta ALTZPON
jsr copy_params_main_to_aux
rts
.endproc
.proc get_file_eof
jsr copy_params_aux_to_main
sta ALTZPOFF
MLI_CALL GET_EOF, get_eof_params
sta ALTZPON
jsr copy_params_main_to_aux
rts
.endproc
.proc set_file_mark
jsr copy_params_aux_to_main
sta ALTZPOFF
MLI_CALL SET_MARK, set_mark_params
sta ALTZPON
jsr copy_params_main_to_aux
rts
.endproc
.proc close_file
jsr copy_params_aux_to_main
sta ALTZPOFF
MLI_CALL CLOSE, close_params
sta ALTZPON
jsr copy_params_main_to_aux
rts
.endproc
;;; ============================================================
;;; Copies param blocks from Aux to Main
.proc copy_params_aux_to_main
ldy #(params_end - params_start + 1)
sta RAMWRTOFF
loop: lda params_start - 1,y
sta params_start - 1,y
dey
bne loop
sta RAMRDOFF
rts
.endproc
;;; Copies param blocks from Main to Aux
.proc copy_params_main_to_aux
pha
php
sta RAMWRTON
ldy #(params_end - params_start + 1)
loop: lda params_start - 1,y
sta params_start - 1,y
dey
bne loop
sta RAMRDON
plp
pla
rts
.endproc
;;; ----------------------------------------
params_start:
;;; This block gets copied between main/aux
;;; ProDOS MLI param blocks
io_buf := $0C00
default_buffer := $1200
read_length := $0100
DEFINE_OPEN_PARAMS open_params, pathbuf, io_buf
DEFINE_READ_PARAMS read_params, default_buffer, read_length
DEFINE_GET_EOF_PARAMS get_eof_params
DEFINE_SET_MARK_PARAMS set_mark_params, 0
DEFINE_CLOSE_PARAMS close_params
pathbuf: .res 65, 0
L0945: .byte $00
L0946: .byte $00
L0947: .byte $00
L0948: .byte $00
L0949: .byte $00
params_end := * + 4 ; bug in original? (harmless as this is static)
;;; ----------------------------------------
black_pattern:
.res 8, $00
white_pattern:
.res $8, $FF
da_window_id := 100
line_spacing := 10
right_const := 506
L095A: .byte $00
L095B: .word right_const
.proc line_pos
left: .word 0
base: .word 0
.endproc
window_width: .word 0
window_height: .word 0
y_remaining: .word 0
unused: .byte 0
line_count: .word 0
L096A: .word 0
L096C: .word 0
track_scroll_delta:
.byte $00
fixed_mode_flag:
.byte $00 ; 0 = proportional, otherwise = fixed
.proc event_params
kind: .byte 0
coords: ; spills into target query
mousex: .word 0
mousey: .word 0
.endproc
.proc findwindow_params
which_area: .byte 0
window_id: .byte 0
.endproc
.proc growwindow_params
window_id: .byte da_window_id
mousex: .word 0
mousey: .word 0
it_grew: .byte 0
.endproc
.proc trackgoaway_params ; queried after close clicked to see if aborted/finished
goaway: .byte 0 ; 0 = aborted, 1 = clicked
.endproc
.byte 0,0 ; ???
.proc findcontrol_params ; queried after a client click to identify target
mousex: .word 0
mousey: .word 0
which_ctl: .byte 0 ; 0 = client, 1 = vscroll, 2 = hscroll
which_part: .byte 0 ; 1 = up, 2 = down, 3 = above, 4 = below, 5 = thumb
.endproc
;; param block used in dead code (resize?)
.proc setctlmax_params
which_ctl: .byte 0
ctlmax: .byte 0
;; needs one more byte?
.endproc
.proc updatethumb_params ; called to update scroll bar position
which_ctl: .byte 0 ; 1 = vscroll, 2 = hscroll
thumbpos: .byte 0 ; new position
.endproc
;;; Used when dragging vscroll thumb
.proc trackthumb_params
which_ctl: .byte 0 ; 1 = vscroll, 2 = hscroll
mousex: .word 0
mousey: .word 0
thumbpos: .byte 0 ; position
thumbmoved: .byte 0 ; 0 if not moved, 1 if moved
.endproc
.proc drawtext_params
textptr: .addr 0 ; address
textlen: .byte 0 ; length
.endproc
default_width := 512
default_height := 150
default_left := 10
default_top := 28
.proc winfo
window_id: .byte da_window_id ; window identifier
options: .byte MGTK::Option::go_away_box ; window flags (2=include close port)
title: .addr dummy1000 ; overwritten to point at filename
hscroll: .byte MGTK::Scroll::option_none
vscroll: .byte MGTK::Scroll::option_normal
hthumbmax: .byte 32
hthumbpos: .byte 0
vthumbmax: .byte 255
vthumbpos: .byte 0
status: .byte 0
reserved: .byte 0
mincontwidth: .word 200
mincontlength: .word 51
maxcontwidth: .word default_width
maxcontlength: .word default_height
port:
viewloc: DEFINE_POINT default_left, default_top, viewloc
mapbits: .addr MGTK::screen_mapbits
mapwidth: .word MGTK::screen_mapwidth
maprect: DEFINE_RECT 0, 0, default_width, default_height, maprect
pattern: .res 8, $00
colormasks: .byte MGTK::colormask_and, MGTK::colormask_or
penloc: DEFINE_POINT 0, 0
penwidth: .byte 1
penheight: .byte 1
penmode: .byte 0
textback: .byte $7F
textfont: .addr DEFAULT_FONT
nextwinfo: .addr 0
.endproc
;; gets copied over winfo::port after mode is drawn
.proc default_port
viewloc: DEFINE_POINT default_left, default_top
mapbits: .word MGTK::screen_mapbits
mapwidth: .word MGTK::screen_mapwidth
maprect: DEFINE_RECT 0, 0, default_width, default_height
.endproc
.proc init
sta ALTZPON
lda LCBANK1
lda LCBANK1
;; Get filename by checking DeskTop selected window/icon
;; Check that an icon is selected
lda #0
sta pathbuf
lda selected_file_count
beq abort ; some file properties?
lda path_index ; prefix index in table
bne :+
abort: rts
;; Copy path (prefix) into pathbuf.
: src := $06
dst := $08
asl a ; (since address table is 2 bytes wide)
tax
copy16 path_table,x, src
ldy #0
lda (src),y
tax
inc src
bne :+
inc src+1
: copy16 #pathbuf+1, dst
jsr copy_pathbuf ; copy x bytes (src) to (dst)
;; Append separator.
lda #'/'
ldy #0
sta (dst),y
inc pathbuf
inc dst
bne :+
inc dst+1
;; Get file entry.
: lda selected_file_list ; file index in table
asl a ; (since table is 2 bytes wide)
tax
copy16 file_table,x, src
;; Exit if a directory.
ldy #2 ; 2nd byte of entry
lda (src),y
and #$70 ; check that one of bits 4,5,6 is set ???
;; some vague patterns, but unclear
;; basic = $32,$33, text = $52, sys = $11,$14,??, bin = $23,$24,$33
;; dir = $01 (so not shown)
bne :+
rts ; abort ???
;; Set window title to point at filename (9th byte of entry)
;; (title includes the spaces before/after from the icon)
: clc
lda src ; name is 9 bytes into entry
adc #9
sta winfo::title
lda src+1
adc #0
sta winfo::title+1
;; Append filename to path.
ldy #9
lda (src),y ; grab length
tax ; name has spaces before/after
dex ; so subtract 2 to get actual length
dex
clc
lda src
adc #11 ; 9 = length, 10 = space, 11 = name
sta src
bcc :+
inc src+1
: jsr copy_pathbuf ; copy x bytes (src) to (dst)
;; Clear selection (why???)
copy16 #JUMP_TABLE_CLEAR_SEL, call_main_addr
jsr call_main_trampoline
jmp open_file_and_init_window
.proc copy_pathbuf ; copy x bytes from src to dst
ldy #0 ; incrementing path length and dst
loop: lda (src),y
sta (dst),y
iny
inc pathbuf
dex
bne loop
tya
clc
adc dst
sta dst
bcc end
inc dst+1
end: rts
.endproc
.endproc
font_width_backup := $1100
.proc open_file_and_init_window
lda #0
sta fixed_mode_flag
;; make backup of font width table; overwritten if fixed
ldx DEFAULT_FONT + MGTK::Font::lastchar
sta RAMWRTOFF
loop: lda DEFAULT_FONT + MGTK::Font::charwidth - 1,x
sta font_width_backup - 1,x
dex
bne loop
sta RAMWRTON
;; open file, get length
jsr open_file
lda open_params::ref_num
sta read_params::ref_num
sta set_mark_params::ref_num
sta get_eof_params::ref_num
sta close_params::ref_num
jsr get_file_eof
;; create window
MGTK_CALL MGTK::OpenWindow, winfo
MGTK_CALL MGTK::SetPort, winfo::port
jsr calc_window_size
jsr calc_and_draw_mode
jsr draw_content
MGTK_CALL MGTK::FlushEvents
;; fall through
.endproc
;;; ============================================================
;;; Main Input Loop
input_loop:
MGTK_CALL MGTK::GetEvent, event_params
lda event_params
cmp #1 ; was clicked?
bne input_loop ; nope, keep waiting
MGTK_CALL MGTK::FindWindow, event_params::coords
lda findwindow_params::window_id ; in our window?
cmp #da_window_id
bne input_loop
;; which part of the window?
lda findwindow_params::which_area
cmp #MGTK::Area::close_box
beq on_close_click
;; title and resize clicks need mouse location
ldx event_params::mousex
stx growwindow_params::mousex
stx findcontrol_params::mousex
ldx event_params::mousex+1
stx growwindow_params::mousex+1
stx findcontrol_params::mousex+1
ldx event_params::mousey
stx growwindow_params::mousey
stx findcontrol_params::mousey
cmp #MGTK::Area::dragbar
beq title
cmp #MGTK::Area::grow_box ; not enabled, so this will never match
beq input_loop
jsr on_client_click
jmp input_loop
title: jsr on_title_bar_click
jmp input_loop
;;; ============================================================
;;; Close Button
.proc on_close_click
MGTK_CALL MGTK::TrackGoAway, trackgoaway_params
lda trackgoaway_params::goaway ; did click complete?
beq input_loop ; nope
jsr close_file
MGTK_CALL MGTK::CloseWindow, winfo
DESKTOP_CALL DT_REDRAW_ICONS
rts ; exits input loop
.endproc
;;; ============================================================
;;; Resize Handle
;;; This is dead code (no resize handle!) and may be buggy
.proc on_resize_click
MGTK_CALL MGTK::GrowWindow, growwindow_params
jsr redraw_screen
jsr calc_window_size
max_width := default_width
lda #>max_width
cmp winfo::maprect::x2+1
bne :+
lda #<max_width
cmp winfo::maprect::x2
: bcs wider
copy16 #max_width, winfo::maprect::x2
sec
lda winfo::maprect::x2
sbc window_width
sta winfo::maprect::x1
lda winfo::maprect::x2+1
sbc window_width+1
sta winfo::maprect::x1+1
wider: lda winfo::hscroll
ldx window_width
cpx #<max_width
bne enable
ldx window_width+1
cpx #>max_width
bne enable
and #(<~MGTK::Scroll::option_active) ; disable scroll
jmp :+
enable: ora #MGTK::Scroll::option_active ; enable scroll
: sta winfo::hscroll
val := $06
sec
lda #<max_width
sbc window_width
sta val
lda #>max_width
sbc window_width+1
sta val+1
jsr div_by_16
sta setctlmax_params::ctlmax
lda #MGTK::Ctl::horizontal_scroll_bar
sta setctlmax_params::which_ctl
MGTK_CALL MGTK::SetCtlMax, setctlmax_params ; change to clamped size ???
jsr calc_and_draw_mode
jmp finish_resize
.endproc
;;; ============================================================
;;; Client Area
;;; Non-title (client) area clicked
.proc on_client_click
;; On one of the scroll bars?
MGTK_CALL MGTK::FindControl, findcontrol_params
lda findcontrol_params::which_ctl
cmp #MGTK::Ctl::vertical_scroll_bar
beq on_vscroll_click
cmp #MGTK::Ctl::horizontal_scroll_bar
bne end
jmp on_hscroll_click
end: rts
.endproc
;;; ============================================================
;;; Vertical Scroll Bar
.proc on_vscroll_click
lda #MGTK::Ctl::vertical_scroll_bar
sta trackthumb_params::which_ctl
sta updatethumb_params::which_ctl
lda findcontrol_params::which_part
cmp #MGTK::Part::thumb
beq on_vscroll_thumb_click
cmp #MGTK::Part::page_down
beq on_vscroll_below_click
cmp #MGTK::Part::page_up
beq on_vscroll_above_click
cmp #MGTK::Part::up_arrow
beq on_vscroll_up_click
cmp #MGTK::Part::down_arrow
bne end
jmp on_vscroll_down_click
end: rts
.endproc
.proc on_vscroll_thumb_click
jsr do_trackthumb
lda trackthumb_params::thumbmoved
beq end
lda trackthumb_params::thumbpos
sta updatethumb_params::thumbpos
jsr update_voffset
jsr update_vscroll
jsr draw_content
lda L0947
beq end
lda L0949
bne end
jsr clear_window
end: rts
.endproc
.proc on_vscroll_above_click
loop: lda winfo::vthumbpos
beq end
jsr calc_track_scroll_delta
sec
lda winfo::vthumbpos
sbc track_scroll_delta
bcs store
lda #0 ; underflow
store: sta updatethumb_params::thumbpos
jsr update_scroll_pos
bcc loop ; repeat while button down
end: rts
.endproc
.proc on_vscroll_up_click
loop : lda winfo::vthumbpos
beq end
sec
sbc #1
sta updatethumb_params::thumbpos
jsr update_scroll_pos
bcc loop ; repeat while button down
end: rts
.endproc
vscroll_max := $FA
.proc on_vscroll_below_click
loop: lda winfo::vthumbpos
cmp #vscroll_max ; pos == max ?
beq end
jsr calc_track_scroll_delta
clc
lda winfo::vthumbpos
adc track_scroll_delta ; pos + delta
bcs overflow
cmp #vscroll_max+1 ; > max ?
bcc store ; nope, it's good
overflow:
lda #vscroll_max ; set to max
store: sta updatethumb_params::thumbpos
jsr update_scroll_pos
bcc loop ; repeat while button down
end: rts
.endproc
.proc on_vscroll_down_click
loop: lda winfo::vthumbpos
cmp #vscroll_max
beq end
clc
adc #1
sta updatethumb_params::thumbpos
jsr update_scroll_pos
bcc loop ; repeat while button down
end: rts
.endproc
.proc update_scroll_pos ; Returns with carry set if mouse released
jsr update_voffset
jsr update_vscroll
jsr draw_content
jsr was_button_released
clc
bne end
sec
end: rts
.endproc
.proc calc_track_scroll_delta
lda window_height ; ceil(height / 50)
ldx #0
loop: inx
sec
sbc #50
cmp #50
bcs loop
stx track_scroll_delta
rts
.endproc
;;; ============================================================
;;; Horizontal Scroll Bar
;;; (Unused in STF DA, so most of this is speculation)
.proc on_hscroll_click
lda #MGTK::Ctl::horizontal_scroll_bar
sta trackthumb_params::which_ctl
sta updatethumb_params::which_ctl
lda findcontrol_params::which_part
cmp #MGTK::Part::thumb
beq on_hscroll_thumb_click
cmp #MGTK::Part::page_right
beq on_hscroll_after_click
cmp #MGTK::Part::page_left
beq on_hscroll_before_click
cmp #MGTK::Part::left_arrow
beq on_hscroll_left_click
cmp #MGTK::Part::right_arrow
beq on_hscroll_right_click
rts
.endproc
.proc on_hscroll_thumb_click
jsr do_trackthumb
lda trackthumb_params::thumbmoved
beq end
res := $06
lda trackthumb_params::thumbpos
jsr mul_by_16
copy16 res, winfo::maprect::x1
clc
lda winfo::maprect::x1
adc window_width
sta winfo::maprect::x2
lda winfo::maprect::x1+1
adc window_width+1
sta winfo::maprect::x2+1
jsr update_hscroll
jsr draw_content
end: rts
.endproc
.proc on_hscroll_after_click
ldx #2
lda winfo::hthumbmax
jmp hscroll_common
.endproc
.proc on_hscroll_before_click
ldx #254
lda #0
jmp hscroll_common
.endproc
.proc on_hscroll_right_click
ldx #1
lda winfo::hthumbmax
jmp hscroll_common
.endproc
.proc on_hscroll_left_click
ldx #255
lda #0
;; fall through
.endproc
.proc hscroll_common
sta compare+1
stx delta+1
loop: lda winfo::hthumbpos
compare:cmp #$0A ; self-modified
bne continue
rts
continue:
clc
lda winfo::hthumbpos
delta: adc #1 ; self-modified
bmi overflow
cmp winfo::hthumbmax
beq store
bcc store
lda winfo::hthumbmax
jmp store
overflow:
lda #0
store: sta winfo::hthumbpos
jsr adjust_box_width
jsr update_hscroll
jsr draw_content
jsr was_button_released
bne loop
rts
.endproc
;;; ============================================================
;;; UI Helpers
;; Used at start of thumb EventKind::drag
.proc do_trackthumb
copy16 event_params::mousex, trackthumb_params::mousex
lda event_params::mousey
sta trackthumb_params::mousey
MGTK_CALL MGTK::TrackThumb, trackthumb_params
rts
.endproc
;;; Checks button state; z clear if button was released, set otherwise
.proc was_button_released
MGTK_CALL MGTK::GetEvent, event_params
lda event_params
cmp #2
rts
.endproc
;;; only used from hscroll code?
.proc adjust_box_width
res := $06
lda winfo::hthumbpos
jsr mul_by_16
clc
lda res
sta winfo::maprect::x1
adc window_width
sta winfo::maprect::x2
lda res+1
sta winfo::maprect::x1+1
adc window_width+1
sta winfo::maprect::x2+1
rts
.endproc
.proc update_voffset
lda #0
sta winfo::maprect::y1
sta winfo::maprect::y1+1
ldx updatethumb_params::thumbpos
loop: beq adjust_box_height
clc
lda winfo::maprect::y1
adc #50
sta winfo::maprect::y1
bcc :+
inc winfo::maprect::y1+1
: dex
jmp loop
.endproc
.proc adjust_box_height
clc
lda winfo::maprect::y1
adc window_height
sta winfo::maprect::y2
lda winfo::maprect::y1+1
adc window_height+1
sta winfo::maprect::y2+1
jsr calc_line_position
lda #0
sta L096A
sta L096A+1
ldx updatethumb_params::thumbpos
loop: beq end
clc
lda L096A
adc #5
sta L096A
bcc :+
inc L096A+1
: dex
jmp loop
end: rts
.endproc
.proc update_hscroll
lda #2
sta updatethumb_params::which_ctl
val := $06
copy16 winfo::maprect::x1, val
jsr div_by_16
sta updatethumb_params::thumbpos
MGTK_CALL MGTK::UpdateThumb, updatethumb_params
rts
.endproc
.proc update_vscroll ; updatethumb_params::thumbpos set by caller
lda #1
sta updatethumb_params::which_ctl
MGTK_CALL MGTK::UpdateThumb, updatethumb_params
rts
.endproc
.proc finish_resize ; only called from dead code
DESKTOP_CALL DT_REDRAW_ICONS
MGTK_CALL MGTK::SetPort, winfo::port
lda winfo::hscroll
ror a ; check if low bit (track enabled) is set
bcc :+
jsr update_hscroll
: lda winfo::vthumbpos
sta updatethumb_params::thumbpos
jsr update_vscroll
jsr draw_content
jmp input_loop
.endproc
.proc clear_window
MGTK_CALL MGTK::SetPattern, white_pattern
MGTK_CALL MGTK::PaintRect, winfo::maprect::x1
MGTK_CALL MGTK::SetPattern, black_pattern
rts
.endproc
;;; ============================================================
;;; Content Rendering
.proc draw_content
ptr := $06
lda #0
sta L0949
jsr assign_fixed_font_width_table_if_needed
jsr set_file_mark
lda #<default_buffer
sta read_params::data_buffer
sta ptr
lda #>default_buffer
sta read_params::data_buffer+1
sta ptr+1
lda #0
sta L0945
sta L0946
sta L0947
sta line_pos::base+1
sta L096C
sta L096C+1
sta L0948
lda #line_spacing
sta line_pos::base
jsr reset_line
do_line:
lda L096C+1
cmp L096A+1
bne :+
lda L096C
cmp L096A
bne :+
jsr clear_window
inc L0948
: MGTK_CALL MGTK::MoveTo, line_pos
sec
lda #250
sbc line_pos::left
sta L095B
lda #1
sbc line_pos::left+1
sta L095B+1
jsr find_text_run
bcs done
clc
lda drawtext_params::textlen
adc ptr
sta ptr
bcc :+
inc ptr+1
: lda L095A
bne do_line
clc
lda line_pos::base
adc #line_spacing
sta line_pos::base
bcc :+
inc line_pos::base+1
: jsr reset_line
lda L096C
cmp line_count
bne :+
lda L096C+1
cmp line_count+1
beq done
: inc L096C
bne :+
inc L096C+1
: jmp do_line
done: jsr restore_proportional_font_table_if_needed
rts
.endproc
;;; ============================================================
.proc reset_line
copy16 #right_const, L095B
copy16 #3, line_pos::left
sta L095A
rts
.endproc
;;; ============================================================
.proc find_text_run
ptr := $06
lda #$FF
sta L0F9B
lda #0
sta run_width
sta run_width+1
sta L095A
sta drawtext_params::textlen
copy16 ptr, drawtext_params::textptr
loop: lda L0945
bne more
lda L0947
beq :+
jsr draw_text_run
sec
rts
: jsr ensure_page_buffered
more: ldy drawtext_params::textlen
lda (ptr),y
and #CHAR_MASK
sta (ptr),y
inc L0945
cmp #CHAR_RETURN
beq finish_text_run
cmp #' '
bne :+
sty L0F9B
pha
lda L0945
sta L0946
pla
: cmp #CHAR_TAB
bne :+
jmp handle_tab
: tay
lda DEFAULT_FONT + MGTK::Font::charwidth,y
clc
adc run_width
sta run_width
bcc :+
inc run_width+1
: lda L095B+1
cmp run_width+1
bne :+
lda L095B
cmp run_width
: bcc :+
inc drawtext_params::textlen
jmp loop
: lda #0
sta L095A
lda L0F9B
cmp #$FF
beq :+
sta drawtext_params::textlen
lda L0946
sta L0945
: inc drawtext_params::textlen
;; fall through
.endproc
.proc finish_text_run
ptr := $06
jsr draw_text_run
ldy drawtext_params::textlen
lda (ptr),y
cmp #CHAR_TAB
beq tab
cmp #CHAR_RETURN
bne :+
tab: inc drawtext_params::textlen
: clc
rts
.endproc
;;; ============================================================
L0F9B: .byte 0
run_width: .word 0
.proc handle_tab
lda #1
sta L095A
clc
lda run_width
adc line_pos::left
sta line_pos::left
lda run_width+1
adc line_pos::left+1
sta line_pos::left+1
ldx #0
loop: lda times70+1,x
cmp line_pos::left+1
bne :+
lda times70,x
cmp line_pos::left
: bcs :+
inx
inx
cpx #14
beq done
jmp loop
: copy16 times70,x, line_pos::left
jmp finish_text_run
done: lda #0
sta L095A
jmp finish_text_run
times70:.word 70
.word 140
.word 210
.word 280
.word 350
.word 420
.word 490
.endproc
;;; ============================================================
;;; Draw a line of content
.proc draw_text_run
lda L0948
beq end
lda drawtext_params::textlen
beq end
MGTK_CALL MGTK::DrawText, drawtext_params
lda #1
sta L0949
end: rts
.endproc
;;; ============================================================
.proc ensure_page_buffered
ptr := $06
lda drawtext_params::textptr+1
cmp #>default_buffer
beq read
;; TODO: Where does $1300 come from ???
;; copy a page of characters from $1300 to the buffer
ldy #0
loop: lda $1300,y
sta default_buffer,y
iny
bne loop
dec drawtext_params::textptr+1
copy16 drawtext_params::textptr, ptr
read: lda #0
sta L0945
jsr read_file_page
lda read_params::data_buffer+1
cmp #>default_buffer
bne :+
inc read_params::data_buffer+1
: rts
.endproc
;;; ============================================================
.proc read_file_page
copy16 read_params::data_buffer, @store_addr
lda #' ' ; fill buffer with spaces
ldx #0
sta RAMWRTOFF
@store_addr := *+1
store: sta default_buffer,x ; self-modified
inx
bne store
sta RAMWRTON ; read file chunk
lda #0
sta L0947
jsr read_file
pha ; copy read buffer main>aux
lda #$00
sta STARTLO
sta DESTINATIONLO
lda #$FF
sta ENDLO
lda read_params::data_buffer+1
sta DESTINATIONHI
sta STARTHI
sta ENDHI
sec ; main>aux
jsr AUXMOVE
pla
beq end
cmp #ERR_END_OF_FILE
beq done
brk ; crash on other error
done: lda #1
sta L0947
end: rts
.endproc
.proc calc_window_size
sec
lda winfo::maprect::x2
sbc winfo::maprect::x1
sta window_width
lda winfo::maprect::x2+1
sbc winfo::maprect::x1+1
sta window_width+1
sec
lda winfo::maprect::y2
sbc winfo::maprect::y1
sta window_height
;; fall through
.endproc
;;; ============================================================
.proc calc_line_position
copy16 winfo::maprect::y2, y_remaining
lda #0
sta line_count
sta line_count+1
loop: lda y_remaining+1
bne :+
lda y_remaining
cmp #line_spacing
bcc end
: sec
lda y_remaining
sbc #line_spacing
sta y_remaining
bcs :+
dec y_remaining+1
: inc line_count
bne loop
inc line_count+1
jmp loop
end: rts
.endproc
;;; ============================================================
.proc div_by_16 ; input in $06/$07, output in a
val := $06
ldx #4
loop: clc
ror val+1
ror val
dex
bne loop
lda val
rts
.endproc
.proc mul_by_16 ; input in a, output in $06/$07
res := $06
sta res
lda #0
sta res+1
ldx #4
loop: clc
rol res
rol res+1
dex
bne loop
rts
.endproc
.proc redraw_screen
copy16 #JUMP_TABLE_REDRAW_ALL, call_main_addr
jsr call_main_trampoline
rts
.endproc
;;; ============================================================
;;; Restore the font glyph width table when switching
;;; back to proportional mode.
.proc restore_proportional_font_table_if_needed
lda fixed_mode_flag ; if not fixed (i.e. proportional)
beq done ; then exit
start := font_width_backup
end := font_width_backup + $7E
dest := DEFAULT_FONT + MGTK::Font::charwidth
lda #<start
sta STARTLO
lda #<end
sta ENDLO
lda #>start
sta STARTHI
sta ENDHI
lda #>dest
sta DESTINATIONHI
lda #<dest
sta DESTINATIONLO
sec ; main>aux
jsr AUXMOVE
done: rts
.endproc
;;; ============================================================
;;; Overwrite the font glyph width table (with 7s)
;;; when switching to fixed width mode.
.proc assign_fixed_font_width_table_if_needed
lda fixed_mode_flag ; if not fixed (i.e. proportional)
beq end ; then exit
ldx DEFAULT_FONT + MGTK::Font::lastchar
lda #7 ; 7 pixels/character
loop: sta DEFAULT_FONT + MGTK::Font::charwidth - 1,x
dex
bne loop
end: rts
.endproc
;;; ============================================================
;;; Title Bar (Proportional/Fixed mode button)
.proc on_title_bar_click
lda event_params::mousex+1 ; mouse x high byte?
cmp mode_mapinfo_viewloc_xcoord+1
bne :+
lda event_params::mousex
cmp mode_mapinfo_viewloc_xcoord
: bcc ignore
;; Toggle the state and redraw
lda fixed_mode_flag
beq set_flag
dec fixed_mode_flag ; clear flag (mode = proportional)
jsr restore_proportional_font_table_if_needed
jmp redraw
set_flag:
inc fixed_mode_flag ; set flag (mode = fixed)
redraw: jsr draw_mode
jsr draw_content
sec ; Click consumed
rts
ignore: clc ; Click ignored
rts
.endproc
fixed_str: DEFINE_STRING "Fixed "
prop_str: DEFINE_STRING "Proportional"
label_width := 50
title_bar_height := 12
.proc mode_mapinfo ; bounding port for mode label
viewloc: DEFINE_POINT 0, 0, viewloc
mapbits: .word MGTK::screen_mapbits
mapwidth: .byte MGTK::screen_mapwidth
reserved: .byte 0
maprect: DEFINE_RECT 0, 0, 80, 10, maprect
.endproc
mode_mapinfo_viewloc_xcoord := mode_mapinfo::viewloc::xcoord
.proc mode_pos
left: .word 0 ; horizontal text offset
base: .word 10 ; vertical text offset (to baseline)
.endproc
.proc calc_and_draw_mode
sec
lda winfo::viewloc::ycoord
sbc #title_bar_height
sta mode_mapinfo::viewloc::ycoord
clc
lda winfo::viewloc::xcoord
adc window_width
pha
lda winfo::viewloc::xcoord+1
adc window_width+1
tax
sec
pla
sbc #<label_width
sta mode_mapinfo::viewloc::xcoord
txa
sbc #>label_width
sta mode_mapinfo::viewloc::xcoord+1
;; fall through...
.endproc
.proc draw_mode
MGTK_CALL MGTK::SetPortBits, mode_mapinfo
MGTK_CALL MGTK::MoveTo, mode_pos
lda fixed_mode_flag
beq else ; is proportional?
MGTK_CALL MGTK::DrawText, fixed_str
jmp endif
else: MGTK_CALL MGTK::DrawText, prop_str
endif: COPY_STRUCT MGTK::MapInfo, default_port, winfo::port
MGTK_CALL MGTK::SetPortBits, winfo::port
rts
.endproc
Reference in New Issue View Git Blame Copy Permalink