Add a2server-help.txt

docs/ivanx/scripts/tools/a2server-help.txt

@@ -0,0 +1,86 @@
+A2SERVER commands:
+  (note: new commands may be added; use a2server-setup to refresh)
+
+a2server-help: show this list of commands
+a2server-setup: set up network boot, Windows access, Farallon fix,
+    refresh command list
+a2server-version: see installed version of A2SERVER
+a2server-update: check for update to A2SERVER
+
+system-shutdown: shut down the server
+system-restart: shut down and restart the server
+
+ Raspberry Pi commands, if you're using one:
+raspi-config: utilize all space on RPi SD card & other options
+raspbian-update : update Raspbian operating system
+rasppleii-update : update Raspbian OS, A2CLOUD, A2SERVER, Apple II Pi
+
+welcome-message-edit: change the welcome message
+
+showip: show the current ethernet IP address of the server
+showmac: show the MAC (Ethernet hardware) address of the server
+showip-wifi: show the current wifi IP address of the server
+showmac-wifi: show the MAC (wifi hardware) address of the server
+ifreset: reset all network interfaces (requires restart) 
+
+netatalk-stop: stop the netatalk service until reboot
+netatalk-start: start the netatalk service
+netatalk-restart: restart the netatalk service
+netatalk-off: disable the netatalk service (even after reboot)
+netatalk-on: enable the netatalk service
+
+bonjour-off: disable advertisement of shared folders to OS X
+bonjour-on : enable advertisement of shared folders to OS X
+  (these are automatically set by the netatalk commands above)
+
+netatalk-router-on: use netatalk in router mode (default)
+netatalk-router-off: use netatalk in node mode
+  (use if there is an AppleTalk router such as a GatorBox present)
+
+netatalk-eth: use wired ethernet interface for netatalk (default)
+netatalk-wifi: use wifi interface for netatalk
+    note: if an interface isn't available, netatalk will be reset with
+    router mode off; use "netatalk-router-on" to correct this if needed
+
+appletalk-off: disable AppleTalk networking (even after reboot)
+appletalk-on : enable AppleTalk networking
+
+environment variables:
+$NETATALK: directory containing netatalk configuration files
+$A2FILES : directory containing A2FILES shared volume
+$GSFILES : directory containing GSFILES shared volume
+
+netboot-gsos: set the current user to netboot into GS/OS (default)
+netboot-gsos-guest: set guests to netboot into GS/OS
+netboot-p8: set the current user to netboot into ProDOS 8
+netboot-p8-guest: set guests to netboot into ProDOS 8 (default)
+  note: when a IIgs is set to network boot into GS/OS, using the Network
+  control panel or the NETBOOT.GSOS utility, guests will behave like
+  registered users, and ignore the netboot setting of the guest user
+  
+guest-off: disallow guest access to A2SERVER
+guest-on: allow guest access to A2SERVER (default)
+  note: by default, Guest access is the only way to network boot into
+  ProDOS 8. For registered user boot into ProDOS 8, type "netboot-p8"
+
+samba-off: disable Windows file sharing (even after reboot)
+samba-on: enable Windows file Sharing
+samba-stop: stop Windows file sharing until reboot
+samba-start: start Windows file sharing
+samba-restart: stop and restart Windows file sharing
+
+gsfiles-share: disable the GSFILES shared volume
+gsfiles-unshare: enable the GSFILES shared volume
+a2files-share: disable the A2FILES shared volume
+a2files-unshare: enable the A2FILES shared volume
+
+nulib2: create, extract, and work with NuFX (ShrinkIt) archive files
+unar: extract other archive files (multiformat)
+lsar: list contents of other archive files (multiformat)
+
+afptype: set the ProDOS type/auxtype or Mac OS type/creator of a file
+afpsync: register files introduced outside of AFP with netatalk
+mkatinit: set up network boot configuration files
+cppo: catalog and copy files from ProDOS image file (slow, but works)
+  (add -h to show help for the above four commands, e.g. "afptype -h")
+