mirror of
https://github.com/RasppleII/a2server.git
synced 2024-06-12 22:29:28 +00:00
81 lines
3.4 KiB
Plaintext
81 lines
3.4 KiB
Plaintext
A2SERVER commands:
|
|
(note: new commands may be added; use a2server-setup to refresh)
|
|
|
|
a2server-help: show this list of commands
|
|
a2server-setup: set up network boot, Windows access, Farallon fix,
|
|
refresh command list
|
|
a2server-version: see installed version of A2SERVER
|
|
a2server-update: check for update to A2SERVER
|
|
|
|
system-shutdown: shut down the server
|
|
system-restart: shut down and restart the server
|
|
|
|
debupdate: update the Raspple II operating system
|
|
|
|
welcome-message-edit: change the welcome message
|
|
|
|
showip: show the current ethernet IP address of the server
|
|
showmac: show the MAC (Ethernet hardware) address of the server
|
|
showip-wifi: show the current wifi IP address of the server
|
|
showmac-wifi: show the MAC (wifi hardware) address of the server
|
|
ifreset: reset all network interfaces (requires restart)
|
|
|
|
netatalk-stop: stop the netatalk service until reboot
|
|
netatalk-start: start the netatalk service
|
|
netatalk-restart: restart the netatalk service
|
|
netatalk-off: disable the netatalk service (even after reboot)
|
|
netatalk-on: enable the netatalk service
|
|
|
|
bonjour-off: disable advertisement of shared folders to OS X
|
|
bonjour-on : enable advertisement of shared folders to OS X
|
|
(these are automatically set by the netatalk commands above)
|
|
|
|
netatalk-router-on: use netatalk in router mode (default)
|
|
netatalk-router-off: use netatalk in node mode
|
|
(use if there is an AppleTalk router such as a GatorBox present)
|
|
|
|
netatalk-eth: use wired ethernet interface for netatalk (default)
|
|
netatalk-wifi: use wifi interface for netatalk
|
|
note: if an interface isn't available, netatalk will be reset with
|
|
router mode off; use "netatalk-router-on" to correct this if needed
|
|
|
|
appletalk-off: disable AppleTalk networking (even after reboot)
|
|
appletalk-on : enable AppleTalk networking
|
|
|
|
environment variables:
|
|
$NETATALK: directory containing netatalk configuration files
|
|
$A2FILES : directory containing A2FILES shared volume
|
|
$GSFILES : directory containing GSFILES shared volume
|
|
|
|
netboot-gsos: set the current user to netboot into GS/OS (default)
|
|
netboot-gsos-guest: set guests to netboot into GS/OS
|
|
netboot-p8: set the current user to netboot into ProDOS 8
|
|
netboot-p8-guest: set guests to netboot into ProDOS 8 (default)
|
|
note: when a IIgs is set to network boot into GS/OS, using the Network
|
|
control panel or the NETBOOT.GSOS utility, guests will behave like
|
|
registered users, and ignore the netboot setting of the guest user
|
|
|
|
guest-off: disallow guest access to A2SERVER
|
|
guest-on: allow guest access to A2SERVER (default)
|
|
note: by default, Guest access is the only way to network boot into
|
|
ProDOS 8. For registered user boot into ProDOS 8, type "netboot-p8"
|
|
|
|
samba-off: disable Windows file sharing (even after reboot)
|
|
samba-on: enable Windows file Sharing
|
|
samba-stop: stop Windows file sharing until reboot
|
|
samba-start: start Windows file sharing
|
|
samba-restart: stop and restart Windows file sharing
|
|
|
|
a2files-share: disable the A2FILES shared volume
|
|
a2files-unshare: enable the A2FILES shared volume
|
|
|
|
nulib2: create, extract, and work with NuFX (ShrinkIt) archive files
|
|
unar: extract other archive files (multiformat)
|
|
lsar: list contents of other archive files (multiformat)
|
|
|
|
afptype: set the ProDOS type/auxtype or Mac OS type/creator of a file
|
|
afpsync: register files introduced outside of AFP with netatalk
|
|
mkatinit: set up network boot configuration files
|
|
cppo: catalog and copy files from ProDOS image file (slow, but works)
|
|
(add -h to show help for the above four commands, e.g. "afptype -h")
|