Clean up corrections

This commit is contained in:
T. Joseph Carter 2017-07-21 08:05:01 -07:00
parent 6a85e10675
commit 1e031e6a83

View File

@ -1,125 +1,146 @@
.na
.nf
.ll60
.br
SIG 1-2 SIG 1-2
.sp3
3-13 3-13
.sp1
roughly 72K of space available to the user; typical for roughly 72K of space available to the user; typical for
5 1/4 inch single density drives. 5 1/4 inch single density drives.
.sp3
4-6 4-6
.sp1
2E-50 Second file descriptive entry 2E-50 Second file descriptive entry
.sp3
4-17 4-17
.sp1
user to read and display the contents of sectors. Some of user to read and display the contents of sectors. Some of
.sp3
6-2 6-2
.sp1
Q7L with Q6L = Read Q7L with Q6L = Read
Q7L with Q6H = Sense Write Protect Q7L with Q6H = Sense Write Protect
Q7H with Q6L = Write Q7H with Q6L = Write
Q7H with Q6H = Load Write Latch Q7H with Q6H = Load Write Latch
.bp
SIG 3-4 SIG 3-4
.sp3
8-5 8-5
.sp1
9E9E If EXECing, call A682 to get the next byte from the 9E9E If EXECing, call A682 to get the next byte from the
.sp3
8-6 8-6
.sp1
index into the state handler table (9D10), go to index into the state handler table (9D10), go to
.sp3
8-8 8-8
.sp1
table of valid keywords (A941). table of valid keywords (A941).
.sp3
8-9 8-9
.sp1
A1AE-A1B8 Clear the file manager parameter list at B5BB to A1AE-A1B8 Clear the file manager parameter list at B5BB to
.sp3
8-13 8-13
.sp1
A4DC Skip a line on the screen. A4DC Skip a line on the screen.
.sp3
8-24 8-24
.sp1
ACA8-ACBA Read a data byte. ACA8-ACBA Read a data byte.
.sp1
AACA-ACD9 WRITE A RANGE OF BYTES subcode handler. AACA-ACD9 WRITE A RANGE OF BYTES subcode handler.
.sp1
ACDA-ACEE Write a data byte. ACDA-ACEE Write a data byte.
.sp3
8-27 8-27
.sp1
AF3A Otherwise, set up RWTS pointer (AF4B). AF3A Otherwise, set up RWTS pointer (AF4B).
.sp1
next (C=1)). next (C=1)).
.sp3
8-28 8-28
.sp1
B052-B0B5 Read/Write Track/Sector (RWTS) driver. B052-B0B5 Read/Write Track/Sector (RWTS) driver.
.sp1
Translate vol mismatch to RC=7, write protected to Translate vol mismatch to RC=7, write protected to
RC=4 and all other errors to RC=8 (I/O error). RC=4 and all other errors to RC=8 (I/O error).
.sp3
8-29 8-29
.sp1
B134-B15A Add a new data sector to file. B134-B15A Add a new data sector to file.
.sp3
8-30 8-30
.sp1
B20B If not, advance index to next entry in sector and B20B If not, advance index to next entry in sector and
.sp3
8-34 8-34
.sp1
Call SETVID ($FE93) and SETKBD ($FE89). Call SETVID ($FE93) and SETKBD ($FE89).
.sp3
8-35 8-35
.sp1
$20=Volume mismatch, $40=Drive error, $08=INIT error. $20=Volume mismatch, $40=Drive error, $08=INIT error.
.sp1
Uses Write Translate Table ($BA29). Uses Write Translate Table ($BA29).
.sp3
8-37 8-37
.sp1
Y-reg:number of autosyncs to write Y-reg:number of autosyncs to write
.sp3
8-39 8-39
.sp1
Jump to DSKFORM at $BEAF. Jump to DSKFORM at $BEAF.
.sp1
Use ILEAV table at $BFB8 for software sector Use ILEAV table at $BFB8 for software sector
.sp3
8-41 8-41
.sp1
BFC8-BFD8 Patch area starts here. BFC8-BFD8 Patch area starts here.
.bp
SIG 5-6 SIG 5-6
.sp3
A-16 A-16
.sp1
using ZAP to patch a catalog entry into track 17 for each using ZAP to patch a catalog entry into track 17 for each
.sp3
C-4 C-4
.sp1
DCT Device Characteristics Table. Used as an DCT Device Characteristics Table. Used as an
.sp3
C-8 C-8
.sp1
subroutine. Similar to a GOSUB statement subroutine. Similar to a GOSUB statement
.sp1
input data is passed from the input data is passed from the
.sp3
C-10 C-10
.sp1
language instruction. JMP is the opcode language instruction. JMP is the opcode
.sp3
C-15 C-15
.sp1
the voltages which represent 0's and the voltages which represent 0's and
.br