mirror of
https://github.com/iKarith/beneath-apple-dos.git
synced 2024-12-22 07:30:43 +00:00
166 lines
6.9 KiB
Plaintext
166 lines
6.9 KiB
Plaintext
Set the command index to -1 (none).
|
|
Reset the pending command flag (none pending).
|
|
9FD6 Add one to command index.
|
|
If first charcater is a control-D, skip it.
|
|
Flush to a non-blank (call A1A4).
|
|
Compare command to command name in command name table
|
|
at A884 for the current command index.
|
|
If it doesn't match and if there are more entries
|
|
left to check, go back to 9FD6.
|
|
If it does match, go to A01B.
|
|
Otherwise, if command was not found in the table,
|
|
check to see if the first character was a control-D.
|
|
If so, go to A6C4 to print "SYNTAX ERROR".
|
|
Otherwise, call A75B to reset the state and warmstart
|
|
flag and go to 9F95 to echo the command and exit.
|
|
(the command must be for BASIC, not DOS)
|
|
A01B Compute an index into the operand table for the
|
|
command which was entered.
|
|
Call A65E to see if a BASIC program is executing.
|
|
If not, and the command is not a direct type command,
|
|
(according to the operand table) go to A6D2 to print
|
|
"NOT DIRECT COMMAND".
|
|
Otherwise, if the command is RUN, make the prompt
|
|
character ($33) non-printing.
|
|
Check the operand table to see if a first filename
|
|
is a legal operand for this command.
|
|
If not, go to A0A0.
|
|
Otherwise, clear the filename buffer (call A095).
|
|
Flush to the next non-blank (call A1A4) and copy
|
|
the filename operand to the first filename buffer.
|
|
Skip forward to a comma if one was not found yet.
|
|
If a second filename is legal for this command, use
|
|
the code above to copy it into the second filename
|
|
buffer.
|
|
Check both filenames to see if they are blank.
|
|
If one was required by the command but not given,
|
|
give a syntax error or pass it through to BASIC.
|
|
(As in the case of LOAD with no operands)
|
|
If all is well, go to A0D1 to continue.
|
|
A095 A subroutine to blank both filename buffers.
|
|
A0A0 Indicate no filename parsed.
|
|
Check operand table to see if a positional operand
|
|
is expected.
|
|
If not, go to A0D1 to continue.
|
|
Otherwise, call A1B9 to convert the numeric operand.
|
|
If omitted, give syntax error.
|
|
If number converted exceeds 16, give "RANGE ERROR"
|
|
If number is supposed to be a slot number, give
|
|
"RANGE ERROR" if it exceeds 7.
|
|
If number is not a slot number, give "RANGE ERROR" if
|
|
it is zero. (MAXFILES 0 is a no-no)
|
|
A0D1 Set defaults for the keyword operands (V=0,L=0,B=0)
|
|
A0E8 Get the line offset index and flush to the next
|
|
non-blank, skipping any commas found.
|
|
If we are not yet to the end of the line, go to A10C.
|
|
Check to see if any keywords were given which were
|
|
not allowed for this command.
|
|
If not, go to A17A to process the command.
|
|
A10C Lookup the keyword found on the command line in the
|
|
table of valid keywords (A940)
|
|
If not in table, give "SYNTAX ERROR" message.
|
|
Get its bit position in the keywords-given flag.
|
|
If the keyword does not have an operand value, go to
|
|
A164.
|
|
Otherwise, indicate keyword found in flag.
|
|
Convert the numeric value associated with keyword.
|
|
Give "SYNTAX ERROR" message if invalid.
|
|
Check to see if the number is within the acceptable
|
|
range as given in the keyword valid range table at
|
|
A955.
|
|
Save the value of the keyword in the keyword values
|
|
table starting at AA66.
|
|
Go parse the next keyword. go to A0E8.
|
|
A164 Indicate C, I, or O keywords were parsed.
|
|
Update the MON value in the keyword value table
|
|
appropriately.
|
|
Go parse the next keyword. go to A0E8.
|
|
.np
|
|
A17A-A17F Call A180 to process the command, then exit via echo
|
|
at 9F83.
|
|
.np
|
|
A180-A192 Do command.
|
|
Reset the video intercept state to zero.
|
|
Clear the file manager parameter list.
|
|
Using the command index, get the address of the
|
|
command handling routine from the command handler
|
|
routine table at 9D1E and go to it.
|
|
Command handler will exit to caller of this routine.
|
|
.np
|
|
A193-A1A3 Get next character on command line and check to see
|
|
if it is a carriage return or a comma.
|
|
.np
|
|
A1A4-A1AD Flush command line characters until a non-blank is
|
|
found.
|
|
.np
|
|
A1AE-A1B8 Clear the file manager parameter list at B5BA to
|
|
zeros.
|
|
.np
|
|
A1B9-A1D5 Convert numeric operand from command line. Call
|
|
either A1D6 (decimal convert) or A203 (hex convert)
|
|
depending upon the presence or lack thereof of a
|
|
dollar sign ($).
|
|
.np
|
|
A1D6-A202 Decimal convert subroutine.
|
|
.np
|
|
A203-A228 Hexadecimal convert subroutine.
|
|
.np
|
|
A229-A22D PR#n command handler.
|
|
Load the parsed numeric value and exit via FE95 in
|
|
the monitor ROM.
|
|
.np
|
|
A22E-A232 IN#n command handler.
|
|
Load the parsed numeric value and exit via FE8B in
|
|
the monitor ROM.
|
|
.np
|
|
A233-A23C MON command handler.
|
|
Add new MON flags to old in AA5E and exit.
|
|
.np
|
|
A23D-A250 NOMON command handler.
|
|
If C was given, put out a carriage return since this
|
|
line was echoed but its CR was not.
|
|
Turn off the proper bits in AA5E and exit.
|
|
.np
|
|
A251-A262 MAXFILES command handler.
|
|
Turn off any EXEC file which is active.
|
|
Close all open files (call A316).
|
|
Set the new MAXFILES number at AA57.
|
|
Go to A7D4 to rebuild the DOS file buffers and exit.
|
|
.np
|
|
A263-A270 DELETE command handler.
|
|
Load the delete file manager opcode (05).
|
|
Call the file manager open driver (A2AA) to perform
|
|
the delete.
|
|
Find the file buffer used to do the delete and free
|
|
it (call A764).
|
|
Exit to caller.
|
|
.np
|
|
A271-A274 LOCK command handler.
|
|
Load the lock file manager opcode (07) and go to
|
|
A277.
|
|
.np
|
|
A275-A27C UNLOCK command handler.
|
|
Load the unlock file manager opcode (08).
|
|
A277 Call the file manager open driver (A2AA) to perform
|
|
the desired function.
|
|
Exit to the caller via close (A2EA).
|
|
.np
|
|
A27D-A280 VERIFY command handler.
|
|
Load the verify file manager opcode (0C) and go to
|
|
A277 to perform function.
|
|
.np
|
|
A281-A297 RENAME command handler.
|
|
Store address of second file name in file manager
|
|
parameter list.
|
|
Load the rename file manager opcode (09).
|
|
Call the file manager driver at A2C8.
|
|
Exit via close (A2EA).
|
|
.np
|
|
A298-A2A2 APPEND command handler.
|
|
Call A2A3 to OPEN the file.
|
|
Read the file byte by byte until a zero is found.
|
|
If append flag is on, add one to record number
|
|
and turn flag off.
|
|
Exit via a call to POSITION.
|
|
.nx ch8.2
|