256 lines
9.8 KiB
Plaintext
256 lines
9.8 KiB
Plaintext
.np
|
|
A884-A908 DOS command name text table.
|
|
This table consists of the ASCII name for each DOS
|
|
command in order of command index values, with the
|
|
last character of each indicated by the MSB being
|
|
on. Commands in order are:
|
|
INIT,LOAD,SAVE,RUN,CHAIN,DELETE,LOCK,UNLOCK,CLOSE,
|
|
READ,EXEC,WRITE,POSITION,OPEN,APPEND,RENAME,
|
|
CATALOG,MON,NOMON,PR#,IN#,MAXFILES,FP,INT,BSAVE,
|
|
BLOAD,BRUN,VERIFY.
|
|
Example: INIT is $49 $4E $49 $D4 (I N I T)
|
|
.np
|
|
A909-A940 Command valid keywords table.
|
|
This table is used to determine which keywords are
|
|
required or may be given for any DOS command.
|
|
Each command has a two byte entry with 16 flags,
|
|
indicating which keywords may be given. The flag
|
|
bit settings are as follows:
|
|
.ul
|
|
BIT MEANING
|
|
0 Filename legal but optional
|
|
1 Command has no positional operand
|
|
2 Filename #1 expected
|
|
3 Filename #2 expected
|
|
4 Slot number positional operand expected
|
|
5 MAXFILES value expected as positional operand
|
|
6 Command may only be issued from within a program
|
|
7 Command may create a new file if file not found
|
|
8 C, I, O keywords legal
|
|
9 V keyword legal
|
|
10 D keyword legal
|
|
11 S keyword legal
|
|
12 L keyword legal
|
|
13 R keyword legal
|
|
14 B keyword legal
|
|
15 A keyword legal
|
|
Thus, for a typical command, OPEN, where the value
|
|
is $2378, bits 2, 6, 7, 9, 10, 11, and 12 are set so
|
|
the command has one filename operand, may only be
|
|
issued from within a program, may create a new file,
|
|
and the V, D, S, and L keywords are legal.
|
|
The command entries are:
|
|
INIT 2170
|
|
LOAD A070
|
|
SAVE A170
|
|
RUN A070
|
|
CHAIN 2070
|
|
DELETE 2070
|
|
LOCK 2070
|
|
UNLOCK 2070
|
|
CLOSE 6000
|
|
READ 2206
|
|
EXEC 2074
|
|
WRITE 2206
|
|
POSITION 2204
|
|
OPEN 2378
|
|
APPEND 2270
|
|
RENAME 3070
|
|
CATALOG 4070
|
|
MON 4080
|
|
NOMON 4080
|
|
PR# 0800
|
|
IN# 0800
|
|
MAXFILES 0400
|
|
FP 4070
|
|
INT 4000
|
|
BSAVE 2179
|
|
BLOAD 2071
|
|
BRUN 2071
|
|
VERIFY 2070
|
|
.np
|
|
A941-A94A Keyword name table.
|
|
This table contains all the ASCII names of the DOS
|
|
keywords in standard order. Each keyword name
|
|
occupies one byte:
|
|
V,D,S,L,R,B,A,C,I,O
|
|
.np
|
|
A94B-A954 Keyword flag bit positions table.
|
|
This table gives the bit positions for each keyword
|
|
into the second byte of the command valid keyword
|
|
table above and in the flag (AA65) which indicates
|
|
which keywords were present on the command line.
|
|
The bit positions are:
|
|
V - 40
|
|
D - 20
|
|
S - 10
|
|
L - 08
|
|
R - 04
|
|
B - 02
|
|
A - 01
|
|
C - C0 ...
|
|
I - A0 ... not used in valid keyword table
|
|
O - 90 ...
|
|
.np
|
|
A955-A970 Keyword value valid range table.
|
|
This table indicates the range any keyword value
|
|
may legally have. Each keyword has a four byte entry,
|
|
two bytes of minimum value, and two bytes of maximum
|
|
value. Values are:
|
|
.ul
|
|
KEYWORD MIN MAX
|
|
V 0 254
|
|
D 1 2
|
|
S 1 7
|
|
L 1 32767
|
|
R 0 32767
|
|
B 0 32767
|
|
A 0 65535
|
|
C, I, and O do not appear in this table since they
|
|
do not have numeric values.
|
|
.np
|
|
A971-AA3E Error message text table.
|
|
This table contains the text for each error code in
|
|
order of error code number:
|
|
.ul
|
|
NUMBER TEXT
|
|
0 RETURN BELL RETURN
|
|
1 "LANGUAGE NOT AVAILABLE"
|
|
2 "RANGE ERROR" (Bad file manager opcode)
|
|
3 "RANGE ERROR" (Bad file manager subcode)
|
|
4 "WRITE PROTECTED
|
|
5 "END OF DATA"
|
|
6 "FILE NOT FOUND"
|
|
7 "VOLUME MISMATCH"
|
|
8 "I/O ERROR"
|
|
9 "DISK FULL"
|
|
10 "FILE LOCKED"
|
|
11 "SYNTAX ERROR"
|
|
12 "NO BUFFERS AVAILABLE"
|
|
13 "FILE TYPE MISMATCH"
|
|
14 "PROGRAM TOO LARGE"
|
|
15 "NOT DIRECT COMMAND"
|
|
.np
|
|
AA3F-AA4F Error message text offset index table.
|
|
This table contains the offset in bytes to the text
|
|
of any given error message in the table above.
|
|
Entries are one byte each for each error code number.
|
|
.np
|
|
AA4F-AA65 DOS main routines variables.
|
|
AA4F Current file buffer address (2 bytes).
|
|
AA51 Status flags: $01=READ state, $00=Warmstart,
|
|
$80=Coldstart, $40=APPLESOFT RAM
|
|
AA52 DOS CSWL intercept state number.
|
|
AA53 Address of true CSWL handler (2 bytes).
|
|
AA55 Address of true KSWL handler (2 bytes).
|
|
AA57 MAXFILES value.
|
|
AA59 Save area for S, X, Y, and A registers when DOS is
|
|
entered (4 bytes).
|
|
AA5D Command line index value (offset into line).
|
|
AA5E MON flags: (C=$40, I=$20, O=$10)
|
|
AA5F Index of last command times 2.
|
|
AA60 Range length for LOAD and BLOAD (2 bytes).
|
|
AA62 Index of pending command, if any.
|
|
AA63 Scratch variable (counter, message index, etc.)
|
|
AA64 Index of current keyword.
|
|
AA65 Keywords present on command line flags.
|
|
.np
|
|
AA66-AA74 Keyword values parsed from command and defaulted.
|
|
AA66 Volume (2 bytes)
|
|
AA68 Drive (2 bytes)
|
|
AA6A Slot (2 bytes)
|
|
AA6C Length (2 bytes)
|
|
AA6E Record (2 bytes)
|
|
AA70 Byte (2 bytes)
|
|
AA72 Address (2 bytes)
|
|
AA74 MON value (one byte)
|
|
.np
|
|
AA75-AA92 Primary file name buffer
|
|
.np
|
|
AA93-AAB0 Secondary (RENAME) file name buffer
|
|
.np
|
|
AAB1-AAC0 DOS main routines constants and variables.
|
|
AAB1 MAXFILES default ($03).
|
|
AAB2 Control-D ($84).
|
|
AAB3 EXEC file active flag ($00=not active).
|
|
AAB4 EXEC file buffer address (2 bytes).
|
|
AAB6 Active BASIC flag: $00=INTEGER, $40=APPLESOFT ROM,
|
|
$80=APPLESOFT RAM
|
|
AAB7 RUN intercepted flag.
|
|
AAB8 "APPLESOFT" characters in ASCII (9 bytes)
|
|
.np
|
|
AAC1-AAC8 File manager constants.
|
|
AAC1 Address of RWTS paramter list (B7E8).
|
|
AAC3 Address of VTOC sector buffer (B3BB).
|
|
AAC5 Address of directory sector buffer (B4BB).
|
|
AAC7 Address of last byte of DOS plus one. (C000)
|
|
.np
|
|
AAC9-AAE4 File manager function routine entry point table.
|
|
This table contains a two byte function handler
|
|
routine address for each of the 14 file manager
|
|
opcodes in opcode order.
|
|
.np
|
|
AAE5-AAF0 File manager read subcode handler entry point table.
|
|
This table contains a two byte function handler
|
|
routine address for each of the 6 read subcodes.
|
|
.np
|
|
AAF1-AAFC File manager write subcode handler entry point table.
|
|
This table contains a two byte function handler
|
|
routine address for each of the 6 write subcodes.
|
|
.np
|
|
AAFD-AB05 File manager external entry point (from $3D6).
|
|
Is X register zero?
|
|
If so, allow new files by simulating an INIT command
|
|
index.
|
|
Otherwise, require old file by simulating a LOAD
|
|
command index.
|
|
Fall through to main file manager entry point.
|
|
.np
|
|
AB06-AB1E File manager main entry.
|
|
Save S register at B39B.
|
|
Restore file manager workarea from file buffer (AE6A)
|
|
Make sure opcode does not exceed 13.
|
|
If it does, return with code=2 (invalid opcode).
|
|
Use opcode as index into file manager function
|
|
routine entry point table and go to proper handler
|
|
via RTS.
|
|
.np
|
|
AB1F-AB21 Return with return code=2 (bad opcode).
|
|
.np
|
|
AB22-AB27 OPEN function handler.
|
|
Call common open code (AB28).
|
|
Exit file manager.
|
|
.np
|
|
AB28-ABDB Common open routine.
|
|
Initialize file manager workarea by resetting
|
|
variables to their defaults (ABDC).
|
|
Set sector length to 256.
|
|
Insure record length is non-zero. If zero, use 1.
|
|
Store record length in file manager workarea.
|
|
Locate or allocate a directory entry for the file
|
|
(B1C9).
|
|
If file already exists, go to ABA6.
|
|
Otherwise, save directory index for free entry.
|
|
Using last command index and valid keywords table,
|
|
determine whether current command may create a new
|
|
file.
|
|
If so, go to AB64.
|
|
Otherwise, if running "APPLESOFT", set return code
|
|
to "LANGUAGE NOT AVAILABLE" and exit.
|
|
If not running "APPLESOFT" set return code to "FILE
|
|
NOT FOUND" and exit.
|
|
AB64 Set sector count in directory entry to 1 (there will
|
|
only be a T/S List sector initially).
|
|
Allocate a sector for a T/S List (B244).
|
|
Store sector number of this sector in directory
|
|
entry and in first and current T/S List sector number
|
|
in file manager workarea.
|
|
Store track number in both places also.
|
|
Move file type desired to directory entry.
|
|
Write directory sector back to catalog (B037).
|
|
Select T/S List buffer (AF0C).
|
|
Zero it (B7D6).
|
|
And write it back (AF3A).
|
|
Set return code to 6 ("FILE NOT FOUND").
|
|
.nx ch8.5
|