1
0
mirror of https://github.com/tilleul/apple2.git synced 2024-12-11 02:49:27 +00:00
bitmap-editor/2liners/the art of 2-liners/SCRN_PLOT_your_sound_routine.md

301 lines
15 KiB
Markdown
Raw Normal View History

2020-04-15 19:49:02 +00:00
# Introduction
This aricle will explain a new (?) technique to poke subroutines using Applesoft (without using POKEs at ALL :D ) and actually spare several characters if you're into 2-liners.
## Generating various sounds in 2-liners.
Using a sound generating routine, we are going to see different techniques to interface assembly routines with Applesoft in the context of 2-liners.
The routines will be taken of the book "Assembly Lines" by Roger Wagner. The book is available freely as a PDF. It is a goldmine. I'm not sure if this is legal or not but whatever, here's the link to download a copy.
https://archive.org/details/AssemblyLinesCompleteWagner/mode/2up
### How it usually works
We all know that the speaker of the Apple II is rather limited. What's worse is that there's no way in Applesoft to generate other sounds than
2020-04-15 19:51:30 +00:00
- a beep, using ``PRINT CHR$(7)``
- a click, by accessing address 49200, for example using a ``PEEK`` or a ``POKE``
2020-04-15 19:49:02 +00:00
The latest technique is called 1-bit sound. It sends a voltage signal to the Apple speaker that will just produce a click because it has been "activated". It is 1-bit because it's either on or off: we're sending voltage or not.
To generate different tones we need to activate the speaker in two nested loops. The inner loop controls the pitch while the outer loop controls the duration ...
This is usually done with some 6502 using delays between accesses to memory 49200 ($C030) ...
One of those routines is provided in Assembly Lines book by Roger Wagner (p. 57).
The routine is the following:
```
0300- A6 07 LDX $07 ; load value in X from byte $07 as duration
0302- A4 06 LDY $06 ; load value in Y from byte $06 as pitch
0304- AD 30 C0 LDA $C030 ; activate the "speaker"
0307- 88 DEY ; decrement the pitch value
0308- D0 FD BNE $0307 ; until it reaches zero
030A- CA DEX ; decrement the duration
030B- D0 F5 BNE $0302 ; until it reaches zero
030D- 60 RTS ; all done
```
Usage from Applesoft is then the following:
2020-04-15 19:56:50 +00:00
```
POKE 6, P: POKE 7, D: CALL S
```
2020-04-15 19:49:02 +00:00
2020-04-16 09:25:27 +00:00
Where P is the "pitch", D is the duration and S equals 768 ($300)...
2020-04-15 19:49:02 +00:00
## Integration with Applesoft: the regular way
But if we want this routine available for Applesoft, we have to either load it from disk (which is not allowed in a 2-liner) or to POKE it into memory before usage.
Like this:
2020-04-15 19:51:30 +00:00
```
2020-04-15 19:49:02 +00:00
10 S=768: FOR L = 0 TO 13 : READ V : POKE S+L ,V : NEXT L: REM 38 + 1 character (":")
20 DATA 166, 7, 164, 6, 173, 48, 192, 136, 208, 253, 202, 208, 245, 96: REM +53 chars = 92 chars
2020-04-15 19:51:30 +00:00
```
2020-04-15 19:49:02 +00:00
As you can see, this takes 92 characters if we were to use it in a 2-liner ...
And each call to generate a sound would take 21 additional characters assuming we use variables for pitch and duration:
2020-04-15 19:56:50 +00:00
```
POKE 6,P : POKE 7,D : CALL S
```
2020-04-15 19:49:02 +00:00
## Integration with Applesoft: relocation of routine in page zero
Can this be reduced ?
Well, first we could relocate it in page zero ... after all, it's only 14 bytes ... of course this all depends on what you need in page zero.
For example, bytes $34-$4F are used by Monitor, it is doubtful you have a need for it (but who knows) ... this would result in,
for example (not all memory location work):
2020-04-15 19:56:50 +00:00
```
2020-04-15 19:49:02 +00:00
10 FOR L = 60 TO 73 : READ V : POKE L,V : NEXT L: REM 31+1 chars
20 DATA 166, 7, 164, 6, 173, 48, 192, 136, 208, 253, 202, 208, 245, 96: REM +53 chars = 85 chars
2020-04-15 19:56:50 +00:00
```
2020-04-16 09:25:27 +00:00
It's reduced to 85 chars ! But each call to generate a sound would take 22 additional characters (because we didn't store the calling address in S)
```
POKE 6,P : POKE 7,D : CALL 60
```
2020-04-15 19:49:02 +00:00
But this is still a lot of bytes just to emit an interesting (?) sound ...
2020-04-15 19:56:50 +00:00
## The main problem: 1-byte value expressed in 3 bytes
2020-04-16 09:25:27 +00:00
The data we have to poke, ranges from 0 to 255 ...
It means that in Applesoft, values above 9, will take 2 bytes (2 characters), while values above 99 will take 3 bytes !
It feels like a waste when you know that a value of 100 could be represented as
* a character (``d``) in ASCII, taking one byte to represent
* an hexadecimal value of ``64``, taking only 2 bytes to represent
Also using DATA and colons to separate each value adds another character, so a value of 100 is actually taking 4 bytes !
The DATA line itself in our example, if we omit "DATA", is 49 characters long for only 14 bytes worth !
Is it possible to reduce this ?
Here are the values again (49 characters, omitting spaces):
```
166, 7, 164, 6, 173, 48, 192, 136, 208, 253, 202, 208, 245, 96
```
In hexa this becomes:
```
A6 07 A4 06 AD 30 C0 88 D0 FD CA D0 F5 60
```
This is only 28 characters if we omit spaces but 41 if we count spaces.
## PRINT code ?
2020-04-16 10:11:17 +00:00
Since ASCII is the shortest as it takes only 14 bytes, could we use ``PRINT`` to print the code in TEXT page 1 ?
2020-04-16 09:25:27 +00:00
If this code was in $400 (TEXT page 1), it would display like this:
![screen capture](img/printsoundroutine.gif)
There are 3 INVERSE characters (byte value < 64), one FLASH character (byte value between 64 and 127), 9 NORMAL characters (byte value between 160 and 255) and 1 non-``PRINT``able character (value between 128 and 159).
To reproduce this we would have to do the following:
```
2020-04-16 10:53:31 +00:00
10 HOME: REM 4 chars (not counted)
20 NORMAL: REM 6+1 chars
30 ?"&G$F-0@HP}JPu": REM +16+1 chars = 24 chars
40 POKE 1025,7: POKE1027,6: POKE1029,48: POKE1031,136: POKE1037,96 : REM +58 chars = 82 chars
2020-04-16 09:25:27 +00:00
```
2020-04-16 10:18:26 +00:00
This is still 82 characters, not counting the ``HOME`` instruction. This instruction is needed for the code to work but is usually there nonetheless in most 2-liners.
2020-04-16 09:25:27 +00:00
If we have a 80-column card we can also use the following code:
```
2020-04-16 10:53:31 +00:00
10 HOME
20 ?"<CTRL-D>PR#3" : REM 8+1 chars
30 ?"<CTRL-Q>&<CTRL-O>G<CTRL-N>$<CTRL-O>F<CTRL-N>-<CTRL-O>0<CTRL-N>@HP}JPu<CTRL-O>`<CTRL-N>" : REM +26 chars = 35 chars
2020-04-16 09:25:27 +00:00
```
2020-04-16 10:11:17 +00:00
Explanation:
* ``?"<CTRL-D>PR#3"`` activates the 80-column card. A carriage return is needed for this command, that's why it's separated from the rest of the code. Once this has been executed, we are in 80 columns mode, it means every other character is actually in auxialary memory, so we need to deactivate 80-columns mode ASAP but not the 80-column hardware.
* ``<CTRL-Q>`` CTRL-Q goes back to 40 columns mode with the 80-column hardware still active.
* ``<CTRL-O>`` every CTRL-O activates INVERSE mode
* ``<CTRL-N>`` while CTRL-N brings back NORMAL mode. Don't forget to end your string with a CTRL-N or you'll be in INVERSE mode after running the code
* ``<CTRL-O>`<CTRL-N>`` there is no FLASH when using the 80-columns hardware, but instead we have an extended INVERSE mode. That's why we print the equivalent of that normally flashing space.
2020-04-16 09:25:27 +00:00
2020-04-16 10:53:31 +00:00
(all these CTRL codes are explained in the 80-column cards manuals, for example [here on Asimov]( https://www.apple.asimov.net/documentation/hardware/video/Apple%20IIe%20Extended%2080-Column%20Text%20Card%20%28Rev%20B%29.pdf) )
2020-04-16 10:18:26 +00:00
2020-04-16 10:11:17 +00:00
The result is the following
![screen capture](img/printsoundroutine80.gif)
As you can see the routine has been perfectly PRINTed into memory. This technique is perfect if you have a 80-column card.
2020-04-16 10:18:26 +00:00
However, one must admit that typing all these CTRLs every time you modify your code is arduous. And of course, it means never scrolling the TEXT page or the routine would disappear. And also, TEXT display is noticeably slower than when the 80-column card is activated. You could deactivate it by adding ``CHR$(21)`` at the end of the ``PRINT`` statement but it costs you 8 more characters.
Well ... 43 characters is still outstanding.
2020-04-16 10:53:31 +00:00
Could we do better ?
2020-04-16 10:11:17 +00:00
## POKEing Hexadecimal from Applesoft
2020-04-16 10:53:31 +00:00
Hexadecimal representation of bytes take only two characters, so it would be only 28 characters in the end. Of course Applesoft doesn't handle hexadecimal but maybe there are workarounds ?
2020-04-15 19:56:50 +00:00
2020-04-16 10:53:31 +00:00
### First, a bad idea
2020-04-15 19:49:02 +00:00
There are ways to send monitor commands via Applesoft but even the monitor does not accept less than 3 characters per byte, that is two characters for the byte + one space like "300:16 07 14 06 AD 30 C0 88 D0 FD CA D0 F5 60".
Such a program would be like this (see http://nparker.llx.com/a2/shlam.html for more info)
2020-04-15 19:56:50 +00:00
```
2020-04-15 19:49:02 +00:00
100 A$="300:A6 07 A4 06 AD 30 C0 88 D0 FD CA D0 F5 60 N D823G": REM 58+1 chars
110 FOR X=1 TO LEN(A$): POKE 511+X,ASC(MID$(A$,X,1))+128: NEXT: REM +52+1 chars = 112 chars
120 POKE 72,0: CALL -144 : REM + 17 chars = 129 chars
2020-04-15 19:56:50 +00:00
```
2020-04-15 19:49:02 +00:00
As you can see, this is worse !
The simple fact that we need 3 characters to "express" one byte is intolerable ...
What if we could use hexadecimal (without spaces) right in Applesoft code ?
2020-04-16 10:53:31 +00:00
### Using strings to hold hexadecimal and then compute the value
If we store our hexadecimal routine in a string we end up with this:
```
A$="A607A406AD30C088D0FDCAD0F560"
```
It's only 33 characters but as such it's unusable. It means we need to write code to parse the string.
Something along the way of (not optimized yet):
```
10 A$="A607A406AD30C088D0FDCAD0F560"
20 FOR I = 1 TO 28 STEP 2
30 N = VAL(MID$(A$,I,1)) * 16 + VAL(MID$(A$,I+1,1)) : REM THIS WILL NOT WORK !
40 POKE 768+I/2, N
50 NEXT
```
Line 30 will not work because whenever we have a letter in ``A$``, ``VAL()`` will return zero.
Line 30 is already 42 characters long and it will have to be more complex to handle A-F characters.
Instead of writing conditional code, we could change A$ in such a way that the same computation is always applied.
Let's code ``A$`` to something else.
If we decide that hexadecimal "0" is coded as "A", "1" as "B", etc, we have the following:
```
10 A$="KGAHKEAGKNDAMAIINAPNMKNAPFGA"
20 FOR I = 1 TO 28 STEP 2
30 N = (ASC(MID$(A$,I,1))-65) * 16 + ASC(MID$(A$,I+1,1)) - 65
30 N = ASC(MID$(A$,I,1)) * 16 + ASC(MID$(A$,I+1,1)) - 1105
40 POKE 768 + I/2, N
50 NEXT
```
As you can see there are two lines 30. The second one is an optimization of the previous one.
If we combine line 40 and line 30 (``POKE 768+I/2, ASC( ...``) we have 112 characters !
Can we do better ?
2020-04-16 11:31:55 +00:00
### Using a string but without manipulating the string
2020-04-16 10:53:31 +00:00
Starting with our coded ``A$`` string, instead of using ``MID$`` and ``ASC`` to get the value to ``POKE``, we could "read" the value directly from it's location in the code.
2020-04-15 19:49:02 +00:00
2020-04-16 10:53:31 +00:00
```
2020-04-15 19:49:02 +00:00
0 A$="KGAHKEAGKNDAMAIINAPNMKNAPFGA" : REM 33+1 chars
1 S=768: FOR I = 2057 TO 2084 STEP 2: POKE S+N, (PEEK(I)-65)*16 + PEEK(I+1) - 65: N=N+1: NEXT: REM +74 chars = 108 chars
1 S=768: FOR I = 2057 TO 2084 STEP 2: POKE S+N, 16*PEEK(I) + PEEK(I+1) - 1105: N=N+1 : NEXT: REM +71 chars = 105 chars
2020-04-16 10:53:31 +00:00
```
(again the second line 1 is an optimization of the first).
Explanation:
The Applesoft code begins in $800 (2048). The first letter of A$ is in position $809 (2057). We simply read those values directly from the code location.
All in all, it's still 105 characters long !
2020-04-15 19:49:02 +00:00
2020-04-16 11:31:55 +00:00
Can we do better ? Of course.
2020-04-15 19:49:02 +00:00
2020-04-16 11:31:55 +00:00
## New technique: PRINT/PLOT hexadecimal
2020-04-15 19:49:02 +00:00
So here comes the technique I've developed for this particular case.
2020-04-16 11:31:55 +00:00
2020-04-15 19:49:02 +00:00
Notice that it can be used for all kinds of subroutines .... just be aware that we're "printing" routines and that the TEXT page lines are not sequential (line 1 is not in $400+40 chars)
This new (?) technique involves using four very simple instructions: PRINT, SCRN, COLOR and PLOT.
2020-04-16 11:31:55 +00:00
2020-04-15 19:49:02 +00:00
We will be using the GR/TEXT capabilities of Applesoft to poke a program in TEXT page 1.
2020-04-16 11:31:55 +00:00
2020-04-15 19:49:02 +00:00
How does it work ?
2020-04-16 11:31:55 +00:00
### PRINT
2020-04-15 19:49:02 +00:00
First we start from our 14 routine bytes: A6 07 A4 06 AD 30 C0 88 D0 FD CA D0 F5 60
2020-04-16 11:31:55 +00:00
2020-04-15 19:49:02 +00:00
We leave every number as it is, but we replace all the letters with new letters according to this:
2020-04-16 11:31:55 +00:00
2020-04-15 19:49:02 +00:00
A becomes J, B becomes K, C->L, D->M, E->N and F becomes O.
2020-04-16 11:31:55 +00:00
2020-04-15 19:49:02 +00:00
We now have J6 07 J4 06 JM 30 L0 88 M0 OM LJ M0 O5 60
We will now take advantage of the GR/TEXT screen and the SCRN function.
2020-04-16 11:31:55 +00:00
2020-04-15 19:49:02 +00:00
We are going to print every low-nibble (4 bits) of each char on line 1 of TEXT (which is line 0 of GR), this means we print "6746M0080MJ050"
2020-04-16 11:31:55 +00:00
And we will print every high-nibble of each char on line 2 of TEXT (which is line 2 of GR), this means we print "J0J0J3L8MOLMO6"
The result is the following:
![screen capture](img/printplotsound1.gif)
If you watch closely, you'll notice that the low nibble is already in place in $400 for our first byte (we have the "6" of $A6) and that the low nibble of the value in $480 ("A" from $CA) is the value we need to place as the high nibble of our first byte.
We must find a way to leave unchanged the low nibble of each byte in line 1 and use the low nibble of each byte in line 2 as the high nibble of each byte in line 1.
### SCRN, COLOR & PLOT
As you know, SCRN will return the color of a "point" in Lo-res. You also know that one TEXT character is represented as 2 "vertical" points of various colors in lores.
Here's what our two PRINTs look like in GR:
![screen capture](img/printplotsound2.gif)
You see 4 lines of colored points because we printed 2 lines of text.
The colors in line 0 correspond to the low-nibble (4 bits) of the bytes in $400->$40D while the colors in line 1 corresponds to the high-nibble of the bytes in the same range.
And of course, the same goes for lines 2 & 3... Now all we have to do is copy the points in GR line 2 (low-nibbles of bytes in $480-$48D) to line 1 (high nibbles of bytes in $400-$40D).
The result is that in line 0 and 1 of GR, we'll have our sound routine.
2020-04-15 19:49:02 +00:00
Here's the resulting code:
2020-04-16 11:31:55 +00:00
```
2020-04-15 19:49:02 +00:00
0 HOME: REM 4 chars (not counted)
1 ?"6746M0080MJ050": REM 17+1 chars
2 ?"J0J0J3L8MOLMO6": REM +17+1 chars = 36 chars
3 FOR I = 0 TO 13 : REM +10+1 chars = 47 chars we're going to SCRN that TEXT line in VTAB 2
4 COLOR = SCRN(I,2): REM +15+1 chars = 63 chars we have a value 0-15
5 PLOT I,1: REM +7+1 chars = 71 chars we PLOT it on line 1, actually adding 16*color to the byte in $400+I
6 NEXT : REM +4 chars = 75 chars
2020-04-16 11:31:55 +00:00
```
2020-04-15 19:49:02 +00:00
Even with the "HOME" statement at first (which is needed but might already be included in your 2-liner), we have 75+4+1 chars = 80 chars
This is still better than the traditional POKE technique ...
2020-04-16 11:31:55 +00:00
This method can be used to POKE/PLOT longer routines ... just make sure to take into account the fact that one line is 40 chars max, so if you need to handle more bytes, simply add a embracing loop to repeat as needed ... don't forget you can do "NEXT I,J" instead of "NEXT:NEXT" !
2020-04-15 19:49:02 +00:00
Of course, if you need line 1 of TEXT or line 0 of GR, you'll see the routine ... it's probably better using Hires 2-liners....
One last thing.
Roger Wagner's assembly lines contains another routine to handle sound that might be very useful for 2-liners.
Instead of using
2020-04-16 11:31:55 +00:00
```
2020-04-15 19:49:02 +00:00
POKE 6,P: POKE 7,D: CALL 1024
2020-04-16 11:31:55 +00:00
```
2020-04-15 19:49:02 +00:00
it's using
2020-04-16 11:31:55 +00:00
```
2020-04-15 19:49:02 +00:00
CALL 1024, P, D
2020-04-16 11:31:55 +00:00
```
2020-04-15 19:49:02 +00:00
This means saving 12 characters every time you want to emit a sound.
However, the routine itself (see page 148 of the book) is not 14 bytes but 24 bytes. That's 10 bytes more.
If you want to output just one "unsual" sound (not CHR$(7) and not PEEK(49200)), use the 14 bytes routine.
But if you need more tunes, use the 24 bytes routine !
The 24 bytes routine uses 95 characters by itself ... it's almost as good as the "usual" routine we presented first that had 92 chars but it will take 9 characters less to call it !
2020-04-16 11:31:55 +00:00
```
2020-04-15 19:49:02 +00:00
10 HOME : REM 4 (not counted)
20 ? "0L7660L7676746M0080MJ050" : REM 27+1
30 ? "24N8024N80J0J0J3L8MOLMO6" : REM +27+1 = 56
40 FOR I = 0 TO 23 : REM +10+1 chars = 67
50 COLOR = SCRN(I,2) : REM +15+1 chars = 83
60 PLOT I,1 : REM +7+1 chars = 91
70 NEXT: REM +4 chars = 95
100 REM LET'S HEAR SOMETHING
120 FOR I = 0 TO 255
130 CALL 1024 , I, 10
140 NEXT
2020-04-16 11:31:55 +00:00
```
2020-04-15 19:49:02 +00:00
I hope you enjoyed this little tutorial on "how I did it" ! ....
Can you do better than this ? If so, don't hesitate to post, I'd be happy to see what you've come up with !