contiki/cpu/rl78/adf7023/ADF7023.h

411 lines
21 KiB
C
Raw Normal View History

/*
* Copyright (c) 2014, Analog Devices, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \author Dragos Bogdan <Dragos.Bogdan@Analog.com>
* Contributors: Ian Martin <martini@redwirellc.com>
*/
#ifndef __ADF7023_H__
#define __ADF7023_H__
/* Status Word */
#define STATUS_SPI_READY (0x1 << 7)
#define STATUS_IRQ_STATUS (0x1 << 6)
#define STATUS_CMD_READY (0x1 << 5)
#define STATUS_FW_STATE (0x1F << 0)
/* FW_STATE Description */
#define FW_STATE_INIT 0x0F
#define FW_STATE_BUSY 0x00
#define FW_STATE_PHY_OFF 0x11
#define FW_STATE_PHY_ON 0x12
#define FW_STATE_PHY_RX 0x13
#define FW_STATE_PHY_TX 0x14
#define FW_STATE_PHY_SLEEP 0x06
#define FW_STATE_GET_RSSI 0x05
#define FW_STATE_IR_CAL 0x07
#define FW_STATE_AES_DECRYPT_INIT 0x08
#define FW_STATE_AES_DECRYPT 0x09
#define FW_STATE_AES_ENCRYPT 0x0A
/* SPI Memory Access Commands */
2014-01-04 22:27:29 +00:00
#define SPI_MEM_WR 0x18 /* Write data to packet RAM sequentially. */
#define SPI_MEM_RD 0x38 /* Read data from packet RAM sequentially. */
#define SPI_MEMR_WR 0x08 /* Write data to packet RAM nonsequentially. */
#define SPI_MEMR_RD 0x28 /* Read data from packet RAM nonsequentially. */
#define SPI_NOP 0xFF /* No operation. */
/* Radio Controller Commands */
2014-01-04 22:27:29 +00:00
#define CMD_SYNC 0xA2 /* This is an optional command. It is not necessary to use it during device initialization */
#define CMD_PHY_OFF 0xB0 /* Performs a transition of the device into the PHY_OFF state. */
#define CMD_PHY_ON 0xB1 /* Performs a transition of the device into the PHY_ON state. */
#define CMD_PHY_RX 0xB2 /* Performs a transition of the device into the PHY_RX state. */
#define CMD_PHY_TX 0xB5 /* Performs a transition of the device into the PHY_TX state. */
#define CMD_PHY_SLEEP 0xBA /* Performs a transition of the device into the PHY_SLEEP state. */
#define CMD_CONFIG_DEV 0xBB /* Configures the radio parameters based on the BBRAM values. */
#define CMD_GET_RSSI 0xBC /* Performs an RSSI measurement. */
#define CMD_BB_CAL 0xBE /* Performs a calibration of the IF filter. */
#define CMD_HW_RESET 0xC8 /* Performs a full hardware reset. The device enters the PHY_SLEEP state. */
#define CMD_RAM_LOAD_INIT 0xBF /* Prepares the program RAM for a firmware module download. */
#define CMD_RAM_LOAD_DONE 0xC7 /* Performs a reset of the communications processor after download of a firmware module to program RAM. */
#define CMD_IR_CAL 0xBD /* Initiates an image rejection calibration routine. */
#define CMD_AES_ENCRYPT 0xD0 /* Performs an AES encryption on the transmit payload data stored in packet RAM. */
#define CMD_AES_DECRYPT 0xD2 /* Performs an AES decryption on the received payload data stored in packet RAM. */
#define CMD_AES_DECRYPT_INIT 0xD1 /* Initializes the internal variables required for AES decryption. */
#define CMD_RS_ENCODE_INIT 0xD1 /* Initializes the internal variables required for the Reed Solomon encoding. */
#define CMD_RS_ENCODE 0xD0 /* Calculates and appends the Reed Solomon check bytes to the transmit payload data stored in packet RAM. */
#define CMD_RS_DECODE 0xD2 /* Performs a Reed Solomon error correction on the received payload data stored in packet RAM. */
/* Battery Backup Memory (BBRAM) */
#define BBRAM_REG_INTERRUPT_MASK_0 0x100
#define BBRAM_REG_INTERRUPT_MASK_1 0x101
#define BBRAM_REG_NUMBER_OF_WAKEUPS_0 0x102
#define BBRAM_REG_NUMBER_OF_WAKEUPS_1 0x103
#define BBRAM_REG_NUMBER_OF_WAKEUPS_IRQ_THRESHOLD_0 0x104
#define BBRAM_REG_NUMBER_OF_WAKEUPS_IRQ_THRESHOLD_1 0x105
#define BBRAM_REG_RX_DWELL_TIME 0x106
#define BBRAM_REG_PARMTIME_DIVIDER 0x107
#define BBRAM_REG_SWM_RSSI_THRESH 0x108
#define BBRAM_REG_CHANNEL_FREQ_0 0x109
#define BBRAM_REG_CHANNEL_FREQ_1 0x10A
#define BBRAM_REG_CHANNEL_FREQ_2 0x10B
#define BBRAM_REG_RADIO_CFG_0 0x10C
#define BBRAM_REG_RADIO_CFG_1 0x10D
#define BBRAM_REG_RADIO_CFG_2 0x10E
#define BBRAM_REG_RADIO_CFG_3 0x10F
#define BBRAM_REG_RADIO_CFG_4 0x110
#define BBRAM_REG_RADIO_CFG_5 0x111
#define BBRAM_REG_RADIO_CFG_6 0x112
#define BBRAM_REG_RADIO_CFG_7 0x113
#define BBRAM_REG_RADIO_CFG_8 0x114
#define BBRAM_REG_RADIO_CFG_9 0x115
#define BBRAM_REG_RADIO_CFG_10 0x116
#define BBRAM_REG_RADIO_CFG_11 0x117
#define BBRAM_REG_IMAGE_REJECT_CAL_PHASE 0x118
#define BBRAM_REG_IMAGE_REJECT_CAL_AMPLITUDE 0x119
#define BBRAM_REG_MODE_CONTROL 0x11A
#define BBRAM_REG_PREAMBLE_MATCH 0x11B
#define BBRAM_REG_SYMBOL_MODE 0x11C
#define BBRAM_REG_PREAMBLE_LEN 0x11D
#define BBRAM_REG_CRC_POLY_0 0x11E
#define BBRAM_REG_CRC_POLY_1 0x11F
#define BBRAM_REG_SYNC_CONTROL 0x120
#define BBRAM_REG_SYNC_BYTE_0 0x121
#define BBRAM_REG_SYNC_BYTE_1 0x122
#define BBRAM_REG_SYNC_BYTE_2 0x123
#define BBRAM_REG_TX_BASE_ADR 0x124
#define BBRAM_REG_RX_BASE_ADR 0x125
#define BBRAM_REG_PACKET_LENGTH_CONTROL 0x126
#define BBRAM_REG_PACKET_LENGTH_MAX 0x127
#define BBRAM_REG_STATIC_REG_FIX 0x128
#define BBRAM_REG_ADDRESS_MATCH_OFFSET 0x129
#define BBRAM_REG_ADDRESS_LENGTH 0x12A
#define BBRAM_REG_ADDRESS_FILTERING_0 0x12B
#define BBRAM_REG_ADDRESS_FILTERING_1 0x12C
#define BBRAM_REG_ADDRESS_FILTERING_2 0x12D
#define BBRAM_REG_ADDRESS_FILTERING_3 0x12E
#define BBRAM_REG_ADDRESS_FILTERING_4 0x12F
#define BBRAM_REG_ADDRESS_FILTERING_5 0x130
#define BBRAM_REG_ADDRESS_FILTERING_6 0x131
#define BBRAM_REG_ADDRESS_FILTERING_7 0x132
#define BBRAM_REG_ADDRESS_FILTERING_8 0x133
#define BBRAM_REG_ADDRESS_FILTERING_9 0x134
#define BBRAM_REG_ADDRESS_FILTERING_10 0x135
#define BBRAM_REG_ADDRESS_FILTERING_11 0x136
#define BBRAM_REG_ADDRESS_FILTERING_12 0x137
#define BBRAM_REG_RSSI_WAIT_TIME 0x138
#define BBRAM_REG_TESTMODES 0x139
#define BBRAM_REG_TRANSITION_CLOCK_DIV 0x13A
#define BBRAM_REG_RESERVED_0 0x13B
#define BBRAM_REG_RESERVED_1 0x13C
#define BBRAM_REG_RESERVED_2 0x13D
#define BBRAM_REG_RX_SYNTH_LOCK_TIME 0x13E
#define BBRAM_REG_TX_SYNTH_LOCK_TIME 0x13F
/* BBRAM_REG_INTERRUPT_MASK_0 - 0x100 */
#define BBRAM_INTERRUPT_MASK_0_INTERRUPT_NUM_WAKEUPS (0x1 << 7)
#define BBRAM_INTERRUPT_MASK_0_INTERRUPT_SWM_RSSI_DET (0x1 << 6)
#define BBRAM_INTERRUPT_MASK_0_INTERRUPT_AES_DONE (0x1 << 5)
#define BBRAM_INTERRUPT_MASK_0_INTERRUPT_TX_EOF (0x1 << 4)
#define BBRAM_INTERRUPT_MASK_0_INTERRUPT_ADDRESS_MATCH (0x1 << 3)
#define BBRAM_INTERRUPT_MASK_0_INTERRUPT_CRC_CORRECT (0x1 << 2)
#define BBRAM_INTERRUPT_MASK_0_INTERRUPT_SYNC_DETECT (0x1 << 1)
#define BBRAM_INTERRUPT_MASK_0_INTERRUPT_PREMABLE_DETECT (0x1 << 0)
/* BBRAM_REG_INTERRUPT_MASK_1 - 0x101*/
#define BBRAM_INTERRUPT_MASK_1_BATTERY_ALARM (0x1 << 7)
#define BBRAM_INTERRUPT_MASK_1_CMD_READY (0x1 << 6)
#define BBRAM_INTERRUPT_MASK_1_WUC_TIMEOUT (0x1 << 4)
#define BBRAM_INTERRUPT_MASK_1_SPI_READY (0x1 << 1)
#define BBRAM_INTERRUPT_MASK_1_CMD_FINISHED (0x1 << 0)
/* BBRAM_REG_RADIO_CFG_0 - 0x10C */
#define BBRAM_RADIO_CFG_0_DATA_RATE_7_0(x) ((x & 0xFF) << 0)
/* BBRAM_REG_RADIO_CFG_1 - 0x10D */
#define BBRAM_RADIO_CFG_1_FREQ_DEVIATION_11_8(x) ((x & 0xF) << 4)
#define BBRAM_RADIO_CFG_1_DATA_RATE_11_8(x) ((x & 0xF) << 0)
/* BBRAM_REG_RADIO_CFG_2 - 0x10E */
#define BBRAM_RADIO_CFG_2_FREQ_DEVIATION_7_0(x) ((x & 0xFF) << 0)
/* BBRAM_REG_RADIO_CFG_6 - 0x112 */
#define BBRAM_RADIO_CFG_6_SYNTH_LUT_CONFIG_0(x) ((x & 0x3F) << 2)
#define BBRAM_RADIO_CFG_6_DISCRIM_PHASE(x) ((x & 0x3) << 0)
/* BBRAM_REG_RADIO_CFG_7 - 0x113 */
#define BBRAM_RADIO_CFG_7_AGC_LOCK_MODE(x) ((x & 0x3) << 6)
#define BBRAM_RADIO_CFG_7_SYNTH_LUT_CONTROL(x) ((x & 0x3) << 4)
#define BBRAM_RADIO_CFG_7_SYNTH_LUT_CONFIG_1(x) ((x & 0xF) << 0)
/* BBRAM_REG_RADIO_CFG_8 - 0x114 */
#define BBRAM_RADIO_CFG_8_PA_SINGLE_DIFF_SEL (0x1 << 7)
#define BBRAM_RADIO_CFG_8_PA_LEVEL(x) ((x & 0xF) << 3)
#define BBRAM_RADIO_CFG_8_PA_RAMP(x) ((x & 0x7) << 0)
/* BBRAM_REG_RADIO_CFG_9 - 0x115 */
#define BBRAM_RADIO_CFG_9_IFBW(x) ((x & 0x3) << 6)
#define BBRAM_RADIO_CFG_9_MOD_SCHEME(x) ((x & 0x7) << 3)
#define BBRAM_RADIO_CFG_9_DEMOD_SCHEME(x) ((x & 0x7) << 0)
/* BBRAM_REG_RADIO_CFG_10 - 0x116 */
#define BBRAM_RADIO_CFG_10_AFC_POLARITY (0x0 << 4)
#define BBRAM_RADIO_CFG_10_AFC_SCHEME(x) ((x & 0x3) << 2)
#define BBRAM_RADIO_CFG_10_AFC_LOCK_MODE(x) ((x & 0x3) << 0)
/* BBRAM_REG_RADIO_CFG_11 - 0x117 */
#define BBRAM_RADIO_CFG_11_AFC_KP(x) ((x & 0xF) << 4)
#define BBRAM_RADIO_CFG_11_AFC_KI(x) ((x & 0xF) << 0)
/* BBRAM_REG_MODE_CONTROL - 0x11A */
#define BBRAM_MODE_CONTROL_SWM_EN (0x1 << 7)
#define BBRAM_MODE_CONTROL_BB_CAL (0x1 << 6)
#define BBRAM_MODE_CONTROL_SWM_RSSI_QUAL (0x1 << 5)
#define BBRAM_MODE_CONTROL_TX_TO_RX_AUTO_TURNAROUND (0x1 << 4)
#define BBRAM_MODE_CONTROL_RX_TO_TX_AUTO_TURNAROUND (0x1 << 3)
#define BBRAM_MODE_CONTROL_CUSTOM_TRX_SYNTH_LOCK_TIME_EN (0x1 << 2)
#define BBRAM_MODE_CONTROL_EXT_LNA_EN (0x1 << 1)
#define BBRAM_MODE_CONTROL_EXT_PA_EN (0x1 << 0)
/* BBRAM_REG_SYMBOL_MODE - 0x11C */
#define BBRAM_SYMBOL_MODE_MANCHESTER_ENC (0x1 << 6)
#define BBRAM_SYMBOL_MODE_PROG_CRC_EN (0x1 << 5)
#define BBRAM_SYMBOL_MODE_EIGHT_TEN_ENC (0x1 << 4)
#define BBRAM_SYMBOL_MODE_DATA_WHITENING (0x1 << 3)
#define BBRAM_SYMBOL_MODE_SYMBOL_LENGTH(x) ((x & 0x7) << 0)
/* BBRAM_REG_SYNC_CONTROL - 0x120 */
#define BBRAM_SYNC_CONTROL_SYNC_ERROR_TOL(x) ((x & 0x3) << 6)
#define BBRAM_SYNC_CONTROL_SYNC_WORD_LENGTH(x) ((x & 0x1F) << 0)
/* BBRAM_REG_PACKET_LENGTH_CONTROL - 0x126 */
#define BBRAM_PACKET_LENGTH_CONTROL_DATA_BYTE (0x1 << 7)
#define BBRAM_PACKET_LENGTH_CONTROL_PACKET_LEN (0x1 << 6)
#define BBRAM_PACKET_LENGTH_CONTROL_CRC_EN (0x1 << 5)
#define BBRAM_PACKET_LENGTH_CONTROL_DATA_MODE(x) ((x & 0x3) << 3)
#define BBRAM_PACKET_LENGTH_CONTROL_LENGTH_OFFSET(x) ((x & 0x7) << 0)
/* BBRAM_REG_TESTMODES - 0x139 */
#define BBRAM_TESTMODES_EXT_PA_LNA_ATB_CONFIG (0x1 << 7)
#define BBRAM_TESTMODES_PER_IRQ_SELF_CLEAR (0x1 << 3)
#define BBRAM_TESTMODES_PER_ENABLE (0x1 << 2)
#define BBRAM_TESTMODES_CONTINUOUS_TX (0x1 << 1)
#define BBRAM_TESTMODES_CONTINUOUS_RX (0x1 << 0)
/* Modem Configuration Memory (MCR) */
#define MCR_REG_PA_LEVEL_MCR 0x307
#define MCR_REG_WUC_CONFIG_HIGH 0x30C
#define MCR_REG_WUC_CONFIG_LOW 0x30D
#define MCR_REG_WUC_VALUE_HIGH 0x30E
#define MCR_REG_WUC_VALUE_LOW 0x30F
#define MCR_REG_WUC_FLAG_RESET 0x310
#define MCR_REG_WUC_STATUS 0x311
#define MCR_REG_RSSI_READBACK 0x312
#define MCR_REG_MAX_AFC_RANGE 0x315
#define MCR_REG_IMAGE_REJECT_CAL_CONFIG 0x319
#define MCR_REG_CHIP_SHUTDOWN 0x322
#define MCR_REG_POWERDOWN_RX 0x324
#define MCR_REG_POWERDOWN_AUX 0x325
#define MCR_REG_ADC_READBACK_HIGH 0x327
#define MCR_REG_ADC_READBACK_LOW 0x328
#define MCR_REG_BATTERY_MONITOR_THRESHOLD_VOLTAGE 0x32D
#define MCR_REG_EXT_UC_CLK_DIVIDE 0x32E
#define MCR_REG_AGC_CLK_DIVIDE 0x32F
#define MCR_REG_INTERRUPT_SOURCE_0 0x336
#define MCR_REG_INTERRUPT_SOURCE_1 0x337
#define MCR_REG_CALIBRATION_CONTROL 0x338
#define MCR_REG_CALIBRATION_STATUS 0x339
#define MCR_REG_RXBB_CAL_CALWRD_READBACK 0x345
#define MCR_REG_RXBB_CAL_CALWRD_OVERWRITE 0x346
#define MCR_REG_RCOSC_CAL_READBACK_HIGH 0x34F
#define MCR_REG_RCOSC_CAL_READBACK_LOW 0x350
#define MCR_REG_ADC_CONFIG_LOW 0x359
#define MCR_REG_ADC_CONFIG_HIGH 0x35A
#define MCR_REG_AGC_OOK_CONTROL 0x35B
#define MCR_REG_AGC_CONFIG 0x35C
#define MCR_REG_AGC_MODE 0x35D
#define MCR_REG_AGC_LOW_THRESHOLD 0x35E
#define MCR_REG_AGC_HIGH_THRESHOLD 0x35F
#define MCR_REG_AGC_GAIN_STATUS 0x360
#define MCR_REG_AGC_ADC_WORD 0x361
#define MCR_REG_FREQUENCY_ERROR_READBACK 0x372
#define MCR_REG_VCO_BAND_OVRW_VAL 0x3CB
#define MCR_REG_VCO_AMPL_OVRW_VAL 0x3CC
#define MCR_REG_VCO_OVRW_EN 0x3CD
#define MCR_REG_VCO_CAL_CFG 0x3D0
#define MCR_REG_OSC_CONFIG 0x3D2
#define MCR_REG_VCO_BAND_READBACK 0x3DA
#define MCR_REG_VCO_AMPL_READBACK 0x3DB
#define MCR_REG_ANALOG_TEST_BUS 0x3F8
#define MCR_REG_RSSI_TSTMUX_SEL 0x3F9
#define MCR_REG_GPIO_CONFIGURE 0x3FA
#define MCR_REG_TEST_DAC_GAIN 0x3FD
2014-01-04 22:27:29 +00:00
struct ADF7023_BBRAM {
unsigned char interruptMask0; /* 0x100 */
unsigned char interruptMask1; /* 0x101 */
unsigned char numberOfWakeups0; /* 0x102 */
unsigned char numberOfWakeups1; /* 0x103 */
unsigned char numberOfWakeupsIrqThreshold0; /* 0x104 */
unsigned char numberOfWakeupsIrqThreshold1; /* 0x105 */
unsigned char rxDwellTime; /* 0x106 */
unsigned char parmtimeDivider; /* 0x107 */
unsigned char swmRssiThresh; /* 0x108 */
unsigned char channelFreq0; /* 0x109 */
unsigned char channelFreq1; /* 0x10A */
unsigned char channelFreq2; /* 0x10B */
unsigned char radioCfg0; /* 0x10C */
unsigned char radioCfg1; /* 0x10D */
unsigned char radioCfg2; /* 0x10E */
unsigned char radioCfg3; /* 0x10F */
unsigned char radioCfg4; /* 0x110 */
unsigned char radioCfg5; /* 0x111 */
unsigned char radioCfg6; /* 0x112 */
unsigned char radioCfg7; /* 0x113 */
unsigned char radioCfg8; /* 0x114 */
unsigned char radioCfg9; /* 0x115 */
unsigned char radioCfg10; /* 0x116 */
unsigned char radioCfg11; /* 0x117 */
unsigned char imageRejectCalPhase; /* 0x118 */
unsigned char imageRejectCalAmplitude; /* 0x119 */
unsigned char modeControl; /* 0x11A */
unsigned char preambleMatch; /* 0x11B */
unsigned char symbolMode; /* 0x11C */
unsigned char preambleLen; /* 0x11D */
unsigned char crcPoly0; /* 0x11E */
unsigned char crcPoly1; /* 0x11F */
unsigned char syncControl; /* 0x120 */
unsigned char syncByte0; /* 0x121 */
unsigned char syncByte1; /* 0x122 */
unsigned char syncByte2; /* 0x123 */
unsigned char txBaseAdr; /* 0x124 */
unsigned char rxBaseAdr; /* 0x125 */
unsigned char packetLengthControl; /* 0x126 */
unsigned char packetLengthMax; /* 0x127 */
unsigned char staticRegFix; /* 0x128 */
unsigned char addressMatchOffset; /* 0x129 */
unsigned char addressLength; /* 0x12A */
unsigned char addressFiltering0; /* 0x12B */
unsigned char addressFiltering1; /* 0x12C */
unsigned char addressFiltering2; /* 0x12D */
unsigned char addressFiltering3; /* 0x12E */
unsigned char addressFiltering4; /* 0x12F */
unsigned char addressFiltering5; /* 0x130 */
unsigned char addressFiltering6; /* 0x131 */
unsigned char addressFiltering7; /* 0x132 */
unsigned char addressFiltering8; /* 0x133 */
unsigned char addressFiltering9; /* 0x134 */
unsigned char addressFiltering10; /* 0x135 */
unsigned char addressFiltering11; /* 0x136 */
unsigned char addressFiltering12; /* 0x137 */
unsigned char rssiWaitTime; /* 0x138 */
unsigned char testmodes; /* 0x139 */
unsigned char transitionClockDiv; /* 0x13A */
unsigned char reserved0; /* 0x13B */
unsigned char reserved1; /* 0x13C */
unsigned char reserved2; /* 0x13D */
unsigned char rxSynthLockTime; /* 0x13E */
unsigned char txSynthLockTime; /* 0x13F */
};
#define ADF7023_RAM_SIZE 256
#define ADF7023_TX_BASE_ADR 0x10
#define ADF7023_RX_BASE_ADR ((ADF7023_TX_BASE_ADR + ADF7023_RAM_SIZE) / 2)
/******************************************************************************/
/************************ Functions Declarations ******************************/
/******************************************************************************/
/* Initializes the ADF7023. */
char ADF7023_Init(void);
/* Reads the status word of the ADF7023. */
2014-01-04 22:27:29 +00:00
void ADF7023_GetStatus(unsigned char *status);
/* Initiates a command. */
void ADF7023_SetCommand(unsigned char command);
/* Sets a FW state and waits until the device enters in that state. */
void ADF7023_SetFwState(unsigned char fwState);
/* Reads data from the RAM. */
void ADF7023_GetRAM(unsigned long address,
unsigned long length,
2014-01-04 22:27:29 +00:00
unsigned char *data);
/* Writes data to RAM. */
void ADF7023_SetRAM(unsigned long address,
unsigned long length,
2014-01-04 22:27:29 +00:00
unsigned char *data);
void ADF7023_SetRAM_And_Verify(unsigned long address, unsigned long length, unsigned char *data);
/* Indicates if an incoming packet is available. */
unsigned char ADF7023_ReceivePacketAvailable(void);
/* Receives one packet. */
void ADF7023_ReceivePacket(unsigned char *packet, unsigned char *payload_length);
/* Transmits one packet. */
2014-01-04 22:27:29 +00:00
void ADF7023_TransmitPacket(unsigned char *packet, unsigned char length);
2013-05-20 16:05:41 +00:00
/* Sets the channel frequency. */
void ADF7023_SetChannelFrequency(unsigned long chFreq);
/* Sets the data rate. */
void ADF7023_SetDataRate(unsigned long dataRate);
/* Sets the frequency deviation. */
void ADF7023_SetFrequencyDeviation(unsigned long freqDev);
2014-01-04 22:27:29 +00:00
#endif /* __ADF7023_H__ */