contiki/cpu/mc1322x/tests/autoack-tx.c

190 lines
4.7 KiB
C
Raw Normal View History

2011-02-12 19:01:54 +00:00
/*
* Copyright (c) 2010, Mariano Alvira <mar@devl.org> and other contributors
* to the MC1322x project (http://mc1322x.devl.org)
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of libmc1322x: see http://mc1322x.devl.org
* for details.
*
*
2011-02-12 19:01:54 +00:00
*/
#include <mc1322x.h>
#include <board.h>
#include <stdio.h>
#include "tests.h"
#include "config.h"
#define LED LED_RED
/* 802.15.4 PSDU is 127 MAX */
/* 2 bytes are the FCS */
/* therefore 125 is the max payload length */
#define PAYLOAD_LEN 16
#define DELAY 100000
void fill_packet(volatile packet_t *p) {
static volatile uint8_t count=0;
p->length = 16;
p->offset = 0;
p->data[0] = 0x71; /* 0b 10 01 10 000 1 1 0 0 001 data, ack request, short addr */
p->data[1] = 0x98; /* 0b 10 01 10 000 1 1 0 0 001 data, ack request, short addr */
p->data[2] = count++; /* dsn */
p->data[3] = 0xaa; /* pan */
p->data[4] = 0xaa;
p->data[5] = 0x11; /* dest. short addr. */
p->data[6] = 0x11;
p->data[7] = 0x22; /* src. short addr. */
p->data[8] = 0x22;
/* payload */
p->data[9] = 'a';
p->data[10] = 'c';
p->data[11] = 'k';
p->data[12] = 't';
p->data[13] = 'e';
p->data[14] = 's';
p->data[15] = 't';
}
void maca_tx_callback(volatile packet_t *p) {
switch(p->status) {
case 0:
printf("TX OK\n\r");
break;
case 3:
printf("CRC ERR\n\r");
break;
case 5:
printf("NO ACK\n\r");
break;
default:
printf("unknown status: %d\n", (int)p->status);
}
}
void main(void) {
volatile packet_t *p;
char c;
uint16_t r=30; /* start reception 100us before ack should arrive */
uint16_t end=180; /* 750 us receive window*/
/* trim the reference osc. to 24MHz */
trim_xtal();
2012-10-24 01:50:32 +00:00
uart_init(UART1, 115200);
2011-02-12 19:01:54 +00:00
vreg_init();
maca_init();
set_channel(0); /* channel 11 */
// set_power(0x0f); /* 0xf = -1dbm, see 3-22 */
// set_power(0x11); /* 0x11 = 3dbm, see 3-22 */
set_power(0x12); /* 0x12 is the highest, not documented */
/* sets up tx_on, should be a board specific item */
GPIO->FUNC_SEL_44 = 1;
GPIO->PAD_DIR_SET_44 = 1;
GPIO->FUNC_SEL_45 = 2;
GPIO->PAD_DIR_SET_45 = 1;
*MACA_RXACKDELAY = r;
printf("rx warmup: %d\n\r", (int)(*MACA_WARMUP & 0xfff));
*MACA_RXEND = end;
printf("rx end: %d\n\r", (int)(*MACA_RXEND & 0xfff));
set_prm_mode(AUTOACK);
print_welcome("rftest-tx");
while(1) {
/* call check_maca() periodically --- this works around */
/* a few lockup conditions */
check_maca();
while((p = rx_packet())) {
if(p) {
printf("RX: ");
print_packet(p);
free_packet(p);
}
}
if(uart1_can_get()) {
c = uart1_getc();
switch(c) {
case 'z':
r++;
if(r > 4095) { r = 0; }
*MACA_RXACKDELAY = r;
printf("rx ack delay: %d\n\r", r);
break;
case 'x':
if(r == 0) { r = 4095; } else { r--; }
*MACA_RXACKDELAY = r;
printf("rx ack delay: %d\n\r", r);
break;
case 'q':
end++;
if(r > 4095) { r = 0; }
*MACA_RXEND = end;
printf("rx end: %d\n\r", end);
break;
case 'w':
end--;
if(r == 0) { r = 4095; } else { r--; }
*MACA_RXEND = end;
printf("rx end: %d\n\r", end);
break;
default:
p = get_free_packet();
if(p) {
fill_packet(p);
printf("autoack-tx --- ");
print_packet(p);
tx_packet(p);
}
break;
}
}
}
}