contiki/platform/sky/dev/button-sensor.c

110 lines
3.3 KiB
C
Raw Normal View History

2007-03-15 21:44:51 +00:00
/*
* Copyright (c) 2005, Swedish Institute of Computer Science
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
2010-01-14 20:01:18 +00:00
* @(#)$Id: button-sensor.c,v 1.4 2010/01/14 20:01:19 nifi Exp $
2007-03-15 21:44:51 +00:00
*/
#include "contiki.h"
2007-03-15 21:44:51 +00:00
#include "lib/sensors.h"
#include "dev/hwconf.h"
#include "dev/button-sensor.h"
2011-09-11 15:18:02 +00:00
2007-03-15 21:44:51 +00:00
const struct sensors_sensor button_sensor;
static struct timer debouncetimer;
2010-01-14 15:50:13 +00:00
static int status(int type);
2007-03-15 21:44:51 +00:00
HWCONF_PIN(BUTTON, 2, 7);
HWCONF_IRQ(BUTTON, 2, 7);
/*---------------------------------------------------------------------------*/
2011-09-11 15:18:02 +00:00
#ifdef __IAR_SYSTEMS_ICC__
#pragma vector=PORT2_VECTOR
__interrupt void
#else
2010-01-14 13:53:06 +00:00
interrupt(PORT2_VECTOR)
2011-09-11 15:18:02 +00:00
#endif
2010-01-14 13:53:06 +00:00
irq_p2(void)
2007-03-15 21:44:51 +00:00
{
2010-01-14 13:53:06 +00:00
ENERGEST_ON(ENERGEST_TYPE_IRQ);
2007-03-15 21:44:51 +00:00
if(BUTTON_CHECK_IRQ()) {
if(timer_expired(&debouncetimer)) {
timer_set(&debouncetimer, CLOCK_SECOND / 4);
sensors_changed(&button_sensor);
2010-01-14 13:53:06 +00:00
LPM4_EXIT;
2007-03-15 21:44:51 +00:00
}
}
2010-01-14 13:53:06 +00:00
P2IFG = 0x00;
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
2007-03-15 21:44:51 +00:00
}
/*---------------------------------------------------------------------------*/
2010-01-14 20:01:18 +00:00
static int
2007-03-15 21:44:51 +00:00
value(int type)
{
return BUTTON_READ() || !timer_expired(&debouncetimer);
}
/*---------------------------------------------------------------------------*/
static int
2010-01-14 15:50:13 +00:00
configure(int type, int c)
2007-03-15 21:44:51 +00:00
{
2010-01-14 13:53:06 +00:00
switch (type) {
case SENSORS_ACTIVE:
if (c) {
if(!status(SENSORS_ACTIVE)) {
timer_set(&debouncetimer, 0);
BUTTON_IRQ_EDGE_SELECTD();
BUTTON_SELECT();
BUTTON_MAKE_INPUT();
BUTTON_ENABLE_IRQ();
}
} else {
BUTTON_DISABLE_IRQ();
}
2010-01-14 20:01:18 +00:00
return 1;
2010-01-14 13:53:06 +00:00
}
2007-03-15 21:44:51 +00:00
return 0;
}
/*---------------------------------------------------------------------------*/
2010-01-14 15:50:13 +00:00
static int
2007-03-15 21:44:51 +00:00
status(int type)
{
2010-01-14 13:53:06 +00:00
switch (type) {
case SENSORS_ACTIVE:
case SENSORS_READY:
return BUTTON_IRQ_ENABLED();
}
2010-01-14 15:50:13 +00:00
return 0;
2007-03-15 21:44:51 +00:00
}
/*---------------------------------------------------------------------------*/
SENSORS_SENSOR(button_sensor, BUTTON_SENSOR,
value, configure, status);