mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-08-15 00:29:02 +00:00
99 lines
4.0 KiB
C
99 lines
4.0 KiB
C
|
/*
|
||
|
* Copyright (c) 2013, University of Michigan.
|
||
|
* All rights reserved.
|
||
|
*
|
||
|
* Redistribution and use in source and binary forms, with or without
|
||
|
* modification, are permitted provided that the following conditions
|
||
|
* are met:
|
||
|
* 1. Redistributions of source code must retain the above copyright
|
||
|
* notice, this list of conditions and the following disclaimer.
|
||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||
|
* notice, this list of conditions and the following disclaimer in the
|
||
|
* documentation and/or other materials provided with the distribution.
|
||
|
* 3. Neither the name of the University nor the names of its contributors
|
||
|
* may be used to endorse or promote products derived from this software
|
||
|
* without specific prior written permission.
|
||
|
*
|
||
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
||
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||
|
* SUCH DAMAGE.
|
||
|
*/
|
||
|
/**
|
||
|
* \addtogroup cc2538-spi
|
||
|
* @{
|
||
|
*
|
||
|
* \file
|
||
|
* Implementation of the cc2538 SPI peripheral
|
||
|
*/
|
||
|
#include "contiki.h"
|
||
|
#include "reg.h"
|
||
|
#include "dev/ioc.h"
|
||
|
#include "dev/sys-ctrl.h"
|
||
|
#include "dev/spi.h"
|
||
|
#include "dev/ssi.h"
|
||
|
#include "dev/gpio.h"
|
||
|
#include "spi-arch.h"
|
||
|
|
||
|
/**
|
||
|
* \brief Initialize the SPI bus.
|
||
|
*
|
||
|
* This SPI init() function uses the following #defines to set the pins:
|
||
|
* CC2538_SPI_CLK_PORT_NUM CC2538_SPI_CLK_PIN_NUM
|
||
|
* CC2538_SPI_MOSI_PORT_NUM CC2538_SPI_MOSI_PIN_NUM
|
||
|
* CC2538_SPI_MISO_PORT_NUM CC2538_SPI_MISO_PIN_NUM
|
||
|
* CC2538_SPI_SEL_PORT_NUM CC2538_SPI_SEL_PIN_NUM
|
||
|
*
|
||
|
* This sets the SPI data width to 8 bits and the mode to Freescale mode 3.
|
||
|
*/
|
||
|
void
|
||
|
spi_init(void)
|
||
|
{
|
||
|
/* Enable the SSI peripheral */
|
||
|
REG(SYS_CTRL_RCGCSSI) |= 1;
|
||
|
|
||
|
/* Start by disabling the peripheral before configuring it */
|
||
|
REG(SSI0_BASE + SSI_CR1) = 0;
|
||
|
|
||
|
/* Set the IO clock as the SSI clock */
|
||
|
REG(SSI0_BASE + SSI_CC) = 1;
|
||
|
|
||
|
/* Set the mux correctly to connect the SSI pins to the correct GPIO pins */
|
||
|
ioc_set_sel(CC2538_SPI_CLK_PORT_NUM, CC2538_SPI_CLK_PIN_NUM, IOC_PXX_SEL_SSI0_CLKOUT);
|
||
|
ioc_set_sel(CC2538_SPI_MOSI_PORT_NUM, CC2538_SPI_MOSI_PIN_NUM, IOC_PXX_SEL_SSI0_TXD);
|
||
|
REG(IOC_SSIRXD_SSI0) = (CC2538_SPI_MISO_PORT_NUM * 8) + CC2538_SPI_MISO_PIN_NUM;
|
||
|
ioc_set_sel(CC2538_SPI_SEL_PORT_NUM, CC2538_SPI_SEL_PIN_NUM, IOC_PXX_SEL_SSI0_FSSOUT);
|
||
|
|
||
|
/* Put all the SSI gpios into peripheral mode */
|
||
|
GPIO_PERIPHERAL_CONTROL(GPIO_PORT_TO_BASE(CC2538_SPI_CLK_PORT_NUM), GPIO_PIN_MASK(CC2538_SPI_CLK_PIN_NUM));
|
||
|
GPIO_PERIPHERAL_CONTROL(GPIO_PORT_TO_BASE(CC2538_SPI_MOSI_PORT_NUM), GPIO_PIN_MASK(CC2538_SPI_MOSI_PIN_NUM));
|
||
|
GPIO_PERIPHERAL_CONTROL(GPIO_PORT_TO_BASE(CC2538_SPI_MISO_PORT_NUM), GPIO_PIN_MASK(CC2538_SPI_MISO_PIN_NUM));
|
||
|
GPIO_PERIPHERAL_CONTROL(GPIO_PORT_TO_BASE(CC2538_SPI_SEL_PORT_NUM), GPIO_PIN_MASK(CC2538_SPI_SEL_PIN_NUM));
|
||
|
|
||
|
/* Disable any pull ups or the like */
|
||
|
ioc_set_over(CC2538_SPI_CLK_PORT_NUM, CC2538_SPI_CLK_PIN_NUM, IOC_OVERRIDE_DIS);
|
||
|
ioc_set_over(CC2538_SPI_MOSI_PORT_NUM, CC2538_SPI_MOSI_PIN_NUM, IOC_OVERRIDE_DIS);
|
||
|
ioc_set_over(CC2538_SPI_MISO_PORT_NUM, CC2538_SPI_MISO_PIN_NUM, IOC_OVERRIDE_DIS);
|
||
|
ioc_set_over(CC2538_SPI_SEL_PORT_NUM, CC2538_SPI_SEL_PIN_NUM, IOC_OVERRIDE_DIS);
|
||
|
|
||
|
/* Configure the clock */
|
||
|
REG(SSI0_BASE + SSI_CPSR) = 2;
|
||
|
|
||
|
/* Put the ssi in motorola SPI mode with 8 bit data */
|
||
|
REG(SSI0_BASE + SSI_CR0) = SSI_CR0_SPH_M | SSI_CR0_SPO_M | (7);
|
||
|
|
||
|
/* Enable the SSI */
|
||
|
REG(SSI0_BASE + SSI_CR1) |= SSI_CR1_SSE;
|
||
|
|
||
|
/* Clear the RX FIFO */
|
||
|
SPI_WAITFOREORx();
|
||
|
}
|
||
|
/** @} */
|