contiki/cpu/cc26xx-cc13xx/rf-core/api/ble_cmd.h

1082 lines
76 KiB
C
Raw Normal View History

/******************************************************************************
* Filename: ble_cmd.h
* Revised: $ $
* Revision: $ $
*
* Description: CC26xx/CC13xx API for Bluetooth Low Energy commands
*
* Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************/
#ifndef BLE_CMD_H_
#define BLE_CMD_H_
#ifndef __RFC_STRUCT
#ifdef __GNUC__
#define __RFC_STRUCT __attribute__ ((aligned (4)))
#else
#define __RFC_STRUCT
#endif
#endif
//! \addtogroup rfc
//! @{
//! \addtogroup ble_cmd
//! @{
#include <stdint.h>
#include "mailbox.h"
#include "common_cmd.h"
typedef struct __RFC_STRUCT rfc_bleRadioOp_s rfc_bleRadioOp_t;
typedef struct __RFC_STRUCT rfc_CMD_BLE_SLAVE_s rfc_CMD_BLE_SLAVE_t;
typedef struct __RFC_STRUCT rfc_CMD_BLE_MASTER_s rfc_CMD_BLE_MASTER_t;
typedef struct __RFC_STRUCT rfc_CMD_BLE_ADV_s rfc_CMD_BLE_ADV_t;
typedef struct __RFC_STRUCT rfc_CMD_BLE_ADV_DIR_s rfc_CMD_BLE_ADV_DIR_t;
typedef struct __RFC_STRUCT rfc_CMD_BLE_ADV_NC_s rfc_CMD_BLE_ADV_NC_t;
typedef struct __RFC_STRUCT rfc_CMD_BLE_ADV_SCAN_s rfc_CMD_BLE_ADV_SCAN_t;
typedef struct __RFC_STRUCT rfc_CMD_BLE_SCANNER_s rfc_CMD_BLE_SCANNER_t;
typedef struct __RFC_STRUCT rfc_CMD_BLE_INITIATOR_s rfc_CMD_BLE_INITIATOR_t;
typedef struct __RFC_STRUCT rfc_CMD_BLE_GENERIC_RX_s rfc_CMD_BLE_GENERIC_RX_t;
typedef struct __RFC_STRUCT rfc_CMD_BLE_TX_TEST_s rfc_CMD_BLE_TX_TEST_t;
typedef struct __RFC_STRUCT rfc_CMD_BLE_ADV_PAYLOAD_s rfc_CMD_BLE_ADV_PAYLOAD_t;
typedef struct __RFC_STRUCT rfc_bleMasterSlavePar_s rfc_bleMasterSlavePar_t;
typedef struct __RFC_STRUCT rfc_bleMasterPar_s rfc_bleMasterPar_t;
typedef struct __RFC_STRUCT rfc_bleSlavePar_s rfc_bleSlavePar_t;
typedef struct __RFC_STRUCT rfc_bleAdvPar_s rfc_bleAdvPar_t;
typedef struct __RFC_STRUCT rfc_bleScannerPar_s rfc_bleScannerPar_t;
typedef struct __RFC_STRUCT rfc_bleInitiatorPar_s rfc_bleInitiatorPar_t;
typedef struct __RFC_STRUCT rfc_bleGenericRxPar_s rfc_bleGenericRxPar_t;
typedef struct __RFC_STRUCT rfc_bleTxTestPar_s rfc_bleTxTestPar_t;
typedef struct __RFC_STRUCT rfc_bleMasterSlaveOutput_s rfc_bleMasterSlaveOutput_t;
typedef struct __RFC_STRUCT rfc_bleAdvOutput_s rfc_bleAdvOutput_t;
typedef struct __RFC_STRUCT rfc_bleScannerOutput_s rfc_bleScannerOutput_t;
typedef struct __RFC_STRUCT rfc_bleInitiatorOutput_s rfc_bleInitiatorOutput_t;
typedef struct __RFC_STRUCT rfc_bleGenericRxOutput_s rfc_bleGenericRxOutput_t;
typedef struct __RFC_STRUCT rfc_bleTxTestOutput_s rfc_bleTxTestOutput_t;
typedef struct __RFC_STRUCT rfc_bleWhiteListEntry_s rfc_bleWhiteListEntry_t;
typedef struct __RFC_STRUCT rfc_bleRxStatus_s rfc_bleRxStatus_t;
//! \addtogroup bleRadioOp
//! @{
struct __RFC_STRUCT rfc_bleRadioOp_s {
uint16_t commandNo; //!< The command ID number
uint16_t status; //!< \brief An integer telling the status of the command. This value is
//!< updated by the radio CPU during operation and may be read by the
//!< system CPU at any time.
rfc_radioOp_t *pNextOp; //!< Pointer to the next operation to run after this operation is done
ratmr_t startTime; //!< Absolute or relative start time (depending on the value of <code>startTrigger</code>)
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} startTrigger; //!< Identification of the trigger that starts the operation
struct {
uint8_t rule:4; //!< Condition for running next command: Rule for how to proceed
uint8_t nSkip:4; //!< Number of skips if the rule involves skipping
} condition;
uint8_t channel; //!< \brief Channel to use<br>
//!< 0&ndash;39: BLE advertising/data channel number
//!< 60&ndash;207: Custom frequency; (2300 + <code>channel</code>) MHz
//!< 255: Use existing frequency
//!< Others: <i>Reserved<i>
struct {
uint8_t init:7; //!< \brief If <code>bOverride</code> = 1 or custom frequency is used:<br>
//!< 0: Do not use whitening<br>
//!< Other value: Initialization for 7-bit LFSR whitener
uint8_t bOverride:1; //!< \brief 0: Use default whitening for BLE advertising/data channels<br>
//!< 1: Override whitening initialization with value of init
} whitening;
uint8_t* pParams; //!< Pointer to command specific parameter structure
uint8_t* pOutput; //!< Pointer to command specific output structure
};
//! @}
//! \addtogroup CMD_BLE_SLAVE
//! @{
#define CMD_BLE_SLAVE 0x1801
struct __RFC_STRUCT rfc_CMD_BLE_SLAVE_s {
uint16_t commandNo; //!< The command ID number 0x1801
uint16_t status; //!< \brief An integer telling the status of the command. This value is
//!< updated by the radio CPU during operation and may be read by the
//!< system CPU at any time.
rfc_radioOp_t *pNextOp; //!< Pointer to the next operation to run after this operation is done
ratmr_t startTime; //!< Absolute or relative start time (depending on the value of <code>startTrigger</code>)
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} startTrigger; //!< Identification of the trigger that starts the operation
struct {
uint8_t rule:4; //!< Condition for running next command: Rule for how to proceed
uint8_t nSkip:4; //!< Number of skips if the rule involves skipping
} condition;
uint8_t channel; //!< \brief Channel to use<br>
//!< 0&ndash;39: BLE advertising/data channel number
//!< 60&ndash;207: Custom frequency; (2300 + <code>channel</code>) MHz
//!< 255: Use existing frequency
//!< Others: <i>Reserved<i>
struct {
uint8_t init:7; //!< \brief If <code>bOverride</code> = 1 or custom frequency is used:<br>
//!< 0: Do not use whitening<br>
//!< Other value: Initialization for 7-bit LFSR whitener
uint8_t bOverride:1; //!< \brief 0: Use default whitening for BLE advertising/data channels<br>
//!< 1: Override whitening initialization with value of init
} whitening;
rfc_bleSlavePar_t *pParams; //!< Pointer to command specific parameter structure
rfc_bleMasterSlaveOutput_t *pOutput; //!< Pointer to command specific output structure
};
//! @}
//! \addtogroup CMD_BLE_MASTER
//! @{
#define CMD_BLE_MASTER 0x1802
struct __RFC_STRUCT rfc_CMD_BLE_MASTER_s {
uint16_t commandNo; //!< The command ID number 0x1802
uint16_t status; //!< \brief An integer telling the status of the command. This value is
//!< updated by the radio CPU during operation and may be read by the
//!< system CPU at any time.
rfc_radioOp_t *pNextOp; //!< Pointer to the next operation to run after this operation is done
ratmr_t startTime; //!< Absolute or relative start time (depending on the value of <code>startTrigger</code>)
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} startTrigger; //!< Identification of the trigger that starts the operation
struct {
uint8_t rule:4; //!< Condition for running next command: Rule for how to proceed
uint8_t nSkip:4; //!< Number of skips if the rule involves skipping
} condition;
uint8_t channel; //!< \brief Channel to use<br>
//!< 0&ndash;39: BLE advertising/data channel number
//!< 60&ndash;207: Custom frequency; (2300 + <code>channel</code>) MHz
//!< 255: Use existing frequency
//!< Others: <i>Reserved<i>
struct {
uint8_t init:7; //!< \brief If <code>bOverride</code> = 1 or custom frequency is used:<br>
//!< 0: Do not use whitening<br>
//!< Other value: Initialization for 7-bit LFSR whitener
uint8_t bOverride:1; //!< \brief 0: Use default whitening for BLE advertising/data channels<br>
//!< 1: Override whitening initialization with value of init
} whitening;
rfc_bleMasterPar_t *pParams; //!< Pointer to command specific parameter structure
rfc_bleMasterSlaveOutput_t *pOutput; //!< Pointer to command specific output structure
};
//! @}
//! \addtogroup CMD_BLE_ADV
//! @{
#define CMD_BLE_ADV 0x1803
struct __RFC_STRUCT rfc_CMD_BLE_ADV_s {
uint16_t commandNo; //!< The command ID number 0x1803
uint16_t status; //!< \brief An integer telling the status of the command. This value is
//!< updated by the radio CPU during operation and may be read by the
//!< system CPU at any time.
rfc_radioOp_t *pNextOp; //!< Pointer to the next operation to run after this operation is done
ratmr_t startTime; //!< Absolute or relative start time (depending on the value of <code>startTrigger</code>)
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} startTrigger; //!< Identification of the trigger that starts the operation
struct {
uint8_t rule:4; //!< Condition for running next command: Rule for how to proceed
uint8_t nSkip:4; //!< Number of skips if the rule involves skipping
} condition;
uint8_t channel; //!< \brief Channel to use<br>
//!< 0&ndash;39: BLE advertising/data channel number
//!< 60&ndash;207: Custom frequency; (2300 + <code>channel</code>) MHz
//!< 255: Use existing frequency
//!< Others: <i>Reserved<i>
struct {
uint8_t init:7; //!< \brief If <code>bOverride</code> = 1 or custom frequency is used:<br>
//!< 0: Do not use whitening<br>
//!< Other value: Initialization for 7-bit LFSR whitener
uint8_t bOverride:1; //!< \brief 0: Use default whitening for BLE advertising/data channels<br>
//!< 1: Override whitening initialization with value of init
} whitening;
rfc_bleAdvPar_t *pParams; //!< Pointer to command specific parameter structure
rfc_bleAdvOutput_t *pOutput; //!< Pointer to command specific output structure
};
//! @}
//! \addtogroup CMD_BLE_ADV_DIR
//! @{
#define CMD_BLE_ADV_DIR 0x1804
struct __RFC_STRUCT rfc_CMD_BLE_ADV_DIR_s {
uint16_t commandNo; //!< The command ID number 0x1804
uint16_t status; //!< \brief An integer telling the status of the command. This value is
//!< updated by the radio CPU during operation and may be read by the
//!< system CPU at any time.
rfc_radioOp_t *pNextOp; //!< Pointer to the next operation to run after this operation is done
ratmr_t startTime; //!< Absolute or relative start time (depending on the value of <code>startTrigger</code>)
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} startTrigger; //!< Identification of the trigger that starts the operation
struct {
uint8_t rule:4; //!< Condition for running next command: Rule for how to proceed
uint8_t nSkip:4; //!< Number of skips if the rule involves skipping
} condition;
uint8_t channel; //!< \brief Channel to use<br>
//!< 0&ndash;39: BLE advertising/data channel number
//!< 60&ndash;207: Custom frequency; (2300 + <code>channel</code>) MHz
//!< 255: Use existing frequency
//!< Others: <i>Reserved<i>
struct {
uint8_t init:7; //!< \brief If <code>bOverride</code> = 1 or custom frequency is used:<br>
//!< 0: Do not use whitening<br>
//!< Other value: Initialization for 7-bit LFSR whitener
uint8_t bOverride:1; //!< \brief 0: Use default whitening for BLE advertising/data channels<br>
//!< 1: Override whitening initialization with value of init
} whitening;
rfc_bleAdvPar_t *pParams; //!< Pointer to command specific parameter structure
rfc_bleAdvOutput_t *pOutput; //!< Pointer to command specific output structure
};
//! @}
//! \addtogroup CMD_BLE_ADV_NC
//! @{
#define CMD_BLE_ADV_NC 0x1805
struct __RFC_STRUCT rfc_CMD_BLE_ADV_NC_s {
uint16_t commandNo; //!< The command ID number 0x1805
uint16_t status; //!< \brief An integer telling the status of the command. This value is
//!< updated by the radio CPU during operation and may be read by the
//!< system CPU at any time.
rfc_radioOp_t *pNextOp; //!< Pointer to the next operation to run after this operation is done
ratmr_t startTime; //!< Absolute or relative start time (depending on the value of <code>startTrigger</code>)
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} startTrigger; //!< Identification of the trigger that starts the operation
struct {
uint8_t rule:4; //!< Condition for running next command: Rule for how to proceed
uint8_t nSkip:4; //!< Number of skips if the rule involves skipping
} condition;
uint8_t channel; //!< \brief Channel to use<br>
//!< 0&ndash;39: BLE advertising/data channel number
//!< 60&ndash;207: Custom frequency; (2300 + <code>channel</code>) MHz
//!< 255: Use existing frequency
//!< Others: <i>Reserved<i>
struct {
uint8_t init:7; //!< \brief If <code>bOverride</code> = 1 or custom frequency is used:<br>
//!< 0: Do not use whitening<br>
//!< Other value: Initialization for 7-bit LFSR whitener
uint8_t bOverride:1; //!< \brief 0: Use default whitening for BLE advertising/data channels<br>
//!< 1: Override whitening initialization with value of init
} whitening;
rfc_bleAdvPar_t *pParams; //!< Pointer to command specific parameter structure
rfc_bleAdvOutput_t *pOutput; //!< Pointer to command specific output structure
};
//! @}
//! \addtogroup CMD_BLE_ADV_SCAN
//! @{
#define CMD_BLE_ADV_SCAN 0x1806
struct __RFC_STRUCT rfc_CMD_BLE_ADV_SCAN_s {
uint16_t commandNo; //!< The command ID number 0x1806
uint16_t status; //!< \brief An integer telling the status of the command. This value is
//!< updated by the radio CPU during operation and may be read by the
//!< system CPU at any time.
rfc_radioOp_t *pNextOp; //!< Pointer to the next operation to run after this operation is done
ratmr_t startTime; //!< Absolute or relative start time (depending on the value of <code>startTrigger</code>)
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} startTrigger; //!< Identification of the trigger that starts the operation
struct {
uint8_t rule:4; //!< Condition for running next command: Rule for how to proceed
uint8_t nSkip:4; //!< Number of skips if the rule involves skipping
} condition;
uint8_t channel; //!< \brief Channel to use<br>
//!< 0&ndash;39: BLE advertising/data channel number
//!< 60&ndash;207: Custom frequency; (2300 + <code>channel</code>) MHz
//!< 255: Use existing frequency
//!< Others: <i>Reserved<i>
struct {
uint8_t init:7; //!< \brief If <code>bOverride</code> = 1 or custom frequency is used:<br>
//!< 0: Do not use whitening<br>
//!< Other value: Initialization for 7-bit LFSR whitener
uint8_t bOverride:1; //!< \brief 0: Use default whitening for BLE advertising/data channels<br>
//!< 1: Override whitening initialization with value of init
} whitening;
rfc_bleAdvPar_t *pParams; //!< Pointer to command specific parameter structure
rfc_bleAdvOutput_t *pOutput; //!< Pointer to command specific output structure
};
//! @}
//! \addtogroup CMD_BLE_SCANNER
//! @{
#define CMD_BLE_SCANNER 0x1807
struct __RFC_STRUCT rfc_CMD_BLE_SCANNER_s {
uint16_t commandNo; //!< The command ID number 0x1807
uint16_t status; //!< \brief An integer telling the status of the command. This value is
//!< updated by the radio CPU during operation and may be read by the
//!< system CPU at any time.
rfc_radioOp_t *pNextOp; //!< Pointer to the next operation to run after this operation is done
ratmr_t startTime; //!< Absolute or relative start time (depending on the value of <code>startTrigger</code>)
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} startTrigger; //!< Identification of the trigger that starts the operation
struct {
uint8_t rule:4; //!< Condition for running next command: Rule for how to proceed
uint8_t nSkip:4; //!< Number of skips if the rule involves skipping
} condition;
uint8_t channel; //!< \brief Channel to use<br>
//!< 0&ndash;39: BLE advertising/data channel number
//!< 60&ndash;207: Custom frequency; (2300 + <code>channel</code>) MHz
//!< 255: Use existing frequency
//!< Others: <i>Reserved<i>
struct {
uint8_t init:7; //!< \brief If <code>bOverride</code> = 1 or custom frequency is used:<br>
//!< 0: Do not use whitening<br>
//!< Other value: Initialization for 7-bit LFSR whitener
uint8_t bOverride:1; //!< \brief 0: Use default whitening for BLE advertising/data channels<br>
//!< 1: Override whitening initialization with value of init
} whitening;
rfc_bleScannerPar_t *pParams; //!< Pointer to command specific parameter structure
rfc_bleScannerOutput_t *pOutput; //!< Pointer to command specific output structure
};
//! @}
//! \addtogroup CMD_BLE_INITIATOR
//! @{
#define CMD_BLE_INITIATOR 0x1808
struct __RFC_STRUCT rfc_CMD_BLE_INITIATOR_s {
uint16_t commandNo; //!< The command ID number 0x1808
uint16_t status; //!< \brief An integer telling the status of the command. This value is
//!< updated by the radio CPU during operation and may be read by the
//!< system CPU at any time.
rfc_radioOp_t *pNextOp; //!< Pointer to the next operation to run after this operation is done
ratmr_t startTime; //!< Absolute or relative start time (depending on the value of <code>startTrigger</code>)
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} startTrigger; //!< Identification of the trigger that starts the operation
struct {
uint8_t rule:4; //!< Condition for running next command: Rule for how to proceed
uint8_t nSkip:4; //!< Number of skips if the rule involves skipping
} condition;
uint8_t channel; //!< \brief Channel to use<br>
//!< 0&ndash;39: BLE advertising/data channel number
//!< 60&ndash;207: Custom frequency; (2300 + <code>channel</code>) MHz
//!< 255: Use existing frequency
//!< Others: <i>Reserved<i>
struct {
uint8_t init:7; //!< \brief If <code>bOverride</code> = 1 or custom frequency is used:<br>
//!< 0: Do not use whitening<br>
//!< Other value: Initialization for 7-bit LFSR whitener
uint8_t bOverride:1; //!< \brief 0: Use default whitening for BLE advertising/data channels<br>
//!< 1: Override whitening initialization with value of init
} whitening;
rfc_bleInitiatorPar_t *pParams; //!< Pointer to command specific parameter structure
rfc_bleInitiatorOutput_t *pOutput; //!< Pointer to command specific output structure
};
//! @}
//! \addtogroup CMD_BLE_GENERIC_RX
//! @{
#define CMD_BLE_GENERIC_RX 0x1809
struct __RFC_STRUCT rfc_CMD_BLE_GENERIC_RX_s {
uint16_t commandNo; //!< The command ID number 0x1809
uint16_t status; //!< \brief An integer telling the status of the command. This value is
//!< updated by the radio CPU during operation and may be read by the
//!< system CPU at any time.
rfc_radioOp_t *pNextOp; //!< Pointer to the next operation to run after this operation is done
ratmr_t startTime; //!< Absolute or relative start time (depending on the value of <code>startTrigger</code>)
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} startTrigger; //!< Identification of the trigger that starts the operation
struct {
uint8_t rule:4; //!< Condition for running next command: Rule for how to proceed
uint8_t nSkip:4; //!< Number of skips if the rule involves skipping
} condition;
uint8_t channel; //!< \brief Channel to use<br>
//!< 0&ndash;39: BLE advertising/data channel number
//!< 60&ndash;207: Custom frequency; (2300 + <code>channel</code>) MHz
//!< 255: Use existing frequency
//!< Others: <i>Reserved<i>
struct {
uint8_t init:7; //!< \brief If <code>bOverride</code> = 1 or custom frequency is used:<br>
//!< 0: Do not use whitening<br>
//!< Other value: Initialization for 7-bit LFSR whitener
uint8_t bOverride:1; //!< \brief 0: Use default whitening for BLE advertising/data channels<br>
//!< 1: Override whitening initialization with value of init
} whitening;
rfc_bleGenericRxPar_t *pParams; //!< Pointer to command specific parameter structure
rfc_bleGenericRxOutput_t *pOutput; //!< Pointer to command specific output structure
};
//! @}
//! \addtogroup CMD_BLE_TX_TEST
//! @{
#define CMD_BLE_TX_TEST 0x180A
struct __RFC_STRUCT rfc_CMD_BLE_TX_TEST_s {
uint16_t commandNo; //!< The command ID number 0x180A
uint16_t status; //!< \brief An integer telling the status of the command. This value is
//!< updated by the radio CPU during operation and may be read by the
//!< system CPU at any time.
rfc_radioOp_t *pNextOp; //!< Pointer to the next operation to run after this operation is done
ratmr_t startTime; //!< Absolute or relative start time (depending on the value of <code>startTrigger</code>)
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} startTrigger; //!< Identification of the trigger that starts the operation
struct {
uint8_t rule:4; //!< Condition for running next command: Rule for how to proceed
uint8_t nSkip:4; //!< Number of skips if the rule involves skipping
} condition;
uint8_t channel; //!< \brief Channel to use<br>
//!< 0&ndash;39: BLE advertising/data channel number
//!< 60&ndash;207: Custom frequency; (2300 + <code>channel</code>) MHz
//!< 255: Use existing frequency
//!< Others: <i>Reserved<i>
struct {
uint8_t init:7; //!< \brief If <code>bOverride</code> = 1 or custom frequency is used:<br>
//!< 0: Do not use whitening<br>
//!< Other value: Initialization for 7-bit LFSR whitener
uint8_t bOverride:1; //!< \brief 0: Use default whitening for BLE advertising/data channels<br>
//!< 1: Override whitening initialization with value of init
} whitening;
rfc_bleTxTestPar_t *pParams; //!< Pointer to command specific parameter structure
rfc_bleTxTestOutput_t *pOutput; //!< Pointer to command specific output structure
};
//! @}
//! \addtogroup CMD_BLE_ADV_PAYLOAD
//! @{
#define CMD_BLE_ADV_PAYLOAD 0x1001
struct __RFC_STRUCT rfc_CMD_BLE_ADV_PAYLOAD_s {
uint16_t commandNo; //!< The command ID number 0x1001
uint8_t payloadType; //!< \brief 0: Advertising data<br>
//!< 1: Scan response data
uint8_t newLen; //!< Length of the new payload
uint8_t* pNewData; //!< Pointer to the buffer containing the new data
rfc_bleAdvPar_t *pParams; //!< Pointer to the parameter structure to update
};
//! @}
//! \addtogroup bleMasterSlavePar
//! @{
struct __RFC_STRUCT rfc_bleMasterSlavePar_s {
dataQueue_t* pRxQ; //!< Pointer to receive queue
dataQueue_t* pTxQ; //!< Pointer to transmit queue
struct {
uint8_t bAutoFlushIgnored:1; //!< If 1, automatically remove ignored packets from Rx queue
uint8_t bAutoFlushCrcErr:1; //!< If 1, automatically remove packets with CRC error from Rx queue
uint8_t bAutoFlushEmpty:1; //!< If 1, automatically remove empty packets from Rx queue
uint8_t bIncludeLenByte:1; //!< If 1, include the received length byte in the stored packet; otherwise discard it
uint8_t bIncludeCrc:1; //!< If 1, include the received CRC field in the stored packet; otherwise discard it
uint8_t bAppendRssi:1; //!< If 1, append an RSSI byte to the packet in the Rx queue
uint8_t bAppendStatus:1; //!< If 1, append a status byte to the packet in the Rx queue
uint8_t bAppendTimestamp:1; //!< If 1, append a timestamp to the packet in the Rx queue
} rxConfig; //!< Configuration bits for the receive queue entries
struct {
uint8_t lastRxSn:1; //!< The SN bit of the header of the last packet received with CRC OK
uint8_t lastTxSn:1; //!< The SN bit of the header of the last transmitted packet
uint8_t nextTxSn:1; //!< The SN bit of the header of the next packet to transmit
uint8_t bFirstPkt:1; //!< For slave: 0 if a packet has been transmitted on the connection, 1 otherwise
uint8_t bAutoEmpty:1; //!< 1 if the last transmitted packet was an auto-empty packet
uint8_t bLlCtrlTx:1; //!< 1 if the last transmitted packet was an LL control packet (LLID = 11)
uint8_t bLlCtrlAckRx:1; //!< 1 if the last received packet was the ACK of an LL control packet
uint8_t bLlCtrlAckPending:1; //!< 1 if the last successfully received packet was an LL control packet which has not yet been ACK'ed
} seqStat;
uint8_t maxNack; //!< Maximum number of NACKs received before operation ends. 0: No limit
uint8_t maxPkt; //!< Maximum number of packets transmitted in the operation before it ends. 0: No limit
uint32_t accessAddress; //!< Access address used on the connection
uint8_t crcInit0; //!< CRC initialization value used on the connection &ndash; least significant byte
uint8_t crcInit1; //!< CRC initialization value used on the connection &ndash; middle byte
uint8_t crcInit2; //!< CRC initialization value used on the connection &ndash; most significant byte
};
//! @}
//! \addtogroup bleMasterPar
//! @{
//! Parameter structure for master (CMD_BLE_MASTER)
struct __RFC_STRUCT rfc_bleMasterPar_s {
dataQueue_t* pRxQ; //!< Pointer to receive queue
dataQueue_t* pTxQ; //!< Pointer to transmit queue
struct {
uint8_t bAutoFlushIgnored:1; //!< If 1, automatically remove ignored packets from Rx queue
uint8_t bAutoFlushCrcErr:1; //!< If 1, automatically remove packets with CRC error from Rx queue
uint8_t bAutoFlushEmpty:1; //!< If 1, automatically remove empty packets from Rx queue
uint8_t bIncludeLenByte:1; //!< If 1, include the received length byte in the stored packet; otherwise discard it
uint8_t bIncludeCrc:1; //!< If 1, include the received CRC field in the stored packet; otherwise discard it
uint8_t bAppendRssi:1; //!< If 1, append an RSSI byte to the packet in the Rx queue
uint8_t bAppendStatus:1; //!< If 1, append a status byte to the packet in the Rx queue
uint8_t bAppendTimestamp:1; //!< If 1, append a timestamp to the packet in the Rx queue
} rxConfig; //!< Configuration bits for the receive queue entries
struct {
uint8_t lastRxSn:1; //!< The SN bit of the header of the last packet received with CRC OK
uint8_t lastTxSn:1; //!< The SN bit of the header of the last transmitted packet
uint8_t nextTxSn:1; //!< The SN bit of the header of the next packet to transmit
uint8_t bFirstPkt:1; //!< For slave: 0 if a packet has been transmitted on the connection, 1 otherwise
uint8_t bAutoEmpty:1; //!< 1 if the last transmitted packet was an auto-empty packet
uint8_t bLlCtrlTx:1; //!< 1 if the last transmitted packet was an LL control packet (LLID = 11)
uint8_t bLlCtrlAckRx:1; //!< 1 if the last received packet was the ACK of an LL control packet
uint8_t bLlCtrlAckPending:1; //!< 1 if the last successfully received packet was an LL control packet which has not yet been ACK'ed
} seqStat;
uint8_t maxNack; //!< Maximum number of NACKs received before operation ends. 0: No limit
uint8_t maxPkt; //!< Maximum number of packets transmitted in the operation before it ends. 0: No limit
uint32_t accessAddress; //!< Access address used on the connection
uint8_t crcInit0; //!< CRC initialization value used on the connection &ndash; least significant byte
uint8_t crcInit1; //!< CRC initialization value used on the connection &ndash; middle byte
uint8_t crcInit2; //!< CRC initialization value used on the connection &ndash; most significant byte
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} endTrigger; //!< Trigger that causes the device to end the connection event as soon as allowed
ratmr_t endTime; //!< \brief Time used together with <code>endTrigger</code> that causes the device to end the
//!< connection event as soon as allowed
};
//! @}
//! \addtogroup bleSlavePar
//! @{
//! Parameter structure for slave (CMD_BLE_SLAVE)
struct __RFC_STRUCT rfc_bleSlavePar_s {
dataQueue_t* pRxQ; //!< Pointer to receive queue
dataQueue_t* pTxQ; //!< Pointer to transmit queue
struct {
uint8_t bAutoFlushIgnored:1; //!< If 1, automatically remove ignored packets from Rx queue
uint8_t bAutoFlushCrcErr:1; //!< If 1, automatically remove packets with CRC error from Rx queue
uint8_t bAutoFlushEmpty:1; //!< If 1, automatically remove empty packets from Rx queue
uint8_t bIncludeLenByte:1; //!< If 1, include the received length byte in the stored packet; otherwise discard it
uint8_t bIncludeCrc:1; //!< If 1, include the received CRC field in the stored packet; otherwise discard it
uint8_t bAppendRssi:1; //!< If 1, append an RSSI byte to the packet in the Rx queue
uint8_t bAppendStatus:1; //!< If 1, append a status byte to the packet in the Rx queue
uint8_t bAppendTimestamp:1; //!< If 1, append a timestamp to the packet in the Rx queue
} rxConfig; //!< Configuration bits for the receive queue entries
struct {
uint8_t lastRxSn:1; //!< The SN bit of the header of the last packet received with CRC OK
uint8_t lastTxSn:1; //!< The SN bit of the header of the last transmitted packet
uint8_t nextTxSn:1; //!< The SN bit of the header of the next packet to transmit
uint8_t bFirstPkt:1; //!< For slave: 0 if a packet has been transmitted on the connection, 1 otherwise
uint8_t bAutoEmpty:1; //!< 1 if the last transmitted packet was an auto-empty packet
uint8_t bLlCtrlTx:1; //!< 1 if the last transmitted packet was an LL control packet (LLID = 11)
uint8_t bLlCtrlAckRx:1; //!< 1 if the last received packet was the ACK of an LL control packet
uint8_t bLlCtrlAckPending:1; //!< 1 if the last successfully received packet was an LL control packet which has not yet been ACK'ed
} seqStat;
uint8_t maxNack; //!< Maximum number of NACKs received before operation ends. 0: No limit
uint8_t maxPkt; //!< Maximum number of packets transmitted in the operation before it ends. 0: No limit
uint32_t accessAddress; //!< Access address used on the connection
uint8_t crcInit0; //!< CRC initialization value used on the connection &ndash; least significant byte
uint8_t crcInit1; //!< CRC initialization value used on the connection &ndash; middle byte
uint8_t crcInit2; //!< CRC initialization value used on the connection &ndash; most significant byte
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} timeoutTrigger; //!< Trigger that defines timeout of the first receive operation
ratmr_t timeoutTime; //!< \brief Time used together with <code>timeoutTrigger</code> that defines timeout of the first
//!< receive operation
uint16_t __dummy0;
uint8_t __dummy1;
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} endTrigger; //!< Trigger that causes the device to end the connection event as soon as allowed
ratmr_t endTime; //!< \brief Time used together with <code>endTrigger</code> that causes the device to end the
//!< connection event as soon as allowed
};
//! @}
//! \addtogroup bleAdvPar
//! @{
//! Parameter structure for advertiser (CMD_BLE_ADV*)
struct __RFC_STRUCT rfc_bleAdvPar_s {
dataQueue_t* pRxQ; //!< Pointer to receive queue
struct {
uint8_t bAutoFlushIgnored:1; //!< If 1, automatically remove ignored packets from Rx queue
uint8_t bAutoFlushCrcErr:1; //!< If 1, automatically remove packets with CRC error from Rx queue
uint8_t bAutoFlushEmpty:1; //!< If 1, automatically remove empty packets from Rx queue
uint8_t bIncludeLenByte:1; //!< If 1, include the received length byte in the stored packet; otherwise discard it
uint8_t bIncludeCrc:1; //!< If 1, include the received CRC field in the stored packet; otherwise discard it
uint8_t bAppendRssi:1; //!< If 1, append an RSSI byte to the packet in the Rx queue
uint8_t bAppendStatus:1; //!< If 1, append a status byte to the packet in the Rx queue
uint8_t bAppendTimestamp:1; //!< If 1, append a timestamp to the packet in the Rx queue
} rxConfig; //!< Configuration bits for the receive queue entries
struct {
uint8_t advFilterPolicy:2; //!< \brief The advertiser filter policy, as defined in Volume 2, Part E, Section 7.8.5 of
//!< the Bluetooth 4.0 spec
uint8_t deviceAddrType:1; //!< The type of the device address &ndash; public (0) or random (1)
uint8_t peerAddrType:1; //!< Directed advertiser: The type of the peer address &ndash; public (0) or random (1)
uint8_t bStrictLenFilter:1; //!< 1: Discard messages with illegal length
} advConfig;
uint8_t advLen; //!< Size of advertiser data
uint8_t scanRspLen; //!< Size of scan response data
uint8_t* pAdvData; //!< Pointer to buffer containing ADV*_IND data
uint8_t* pScanRspData; //!< Pointer to buffer containing SCAN_RSP data
uint16_t* pDeviceAddress; //!< Pointer to device address used for this device
rfc_bleWhiteListEntry_t *pWhiteList; //!< Pointer to white list or peer address (directed advertiser)
uint16_t __dummy0;
uint8_t __dummy1;
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} endTrigger; //!< Trigger that causes the device to end the advertiser event as soon as allowed
ratmr_t endTime; //!< \brief Time used together with <code>endTrigger</code> that causes the device to end the
//!< advertiser event as soon as allowed
};
//! @}
//! \addtogroup bleScannerPar
//! @{
//! Parameter structure for scanner (CMD_BLE_SCANNER)
struct __RFC_STRUCT rfc_bleScannerPar_s {
dataQueue_t* pRxQ; //!< Pointer to receive queue
struct {
uint8_t bAutoFlushIgnored:1; //!< If 1, automatically remove ignored packets from Rx queue
uint8_t bAutoFlushCrcErr:1; //!< If 1, automatically remove packets with CRC error from Rx queue
uint8_t bAutoFlushEmpty:1; //!< If 1, automatically remove empty packets from Rx queue
uint8_t bIncludeLenByte:1; //!< If 1, include the received length byte in the stored packet; otherwise discard it
uint8_t bIncludeCrc:1; //!< If 1, include the received CRC field in the stored packet; otherwise discard it
uint8_t bAppendRssi:1; //!< If 1, append an RSSI byte to the packet in the Rx queue
uint8_t bAppendStatus:1; //!< If 1, append a status byte to the packet in the Rx queue
uint8_t bAppendTimestamp:1; //!< If 1, append a timestamp to the packet in the Rx queue
} rxConfig; //!< Configuration bits for the receive queue entries
struct {
uint8_t scanFilterPolicy:1; //!< \brief The advertiser filter policy, as defined in Volume 2, Part E, Section 7.8.10 of
//!< the Bluetooth 4.0 spec
uint8_t bActiveScan:1; //!< \brief 0: Passive scan<br>
//!< 1: Active scan
uint8_t deviceAddrType:1; //!< The type of the device address &ndash; public (0) or random (1)
uint8_t :1;
uint8_t bStrictLenFilter:1; //!< 1: Discard messages with illegal length
uint8_t bAutoWlIgnore:1; //!< 1: Automatically set ignore bit in white list
uint8_t bEndOnRpt:1; //!< 1: End scanner operation after each reported ADV*_IND and potentially SCAN_RSP
} scanConfig;
uint16_t randomState; //!< State for pseudo-random number generation used in backoff procedure
uint16_t backoffCount; //!< Parameter <i>backoffCount</i> used in backoff procedure, cf. Bluetooth 4.0 spec
struct {
uint8_t logUpperLimit:4; //!< Binary logarithm of parameter upperLimit used in scanner backoff procedure
uint8_t bLastSucceeded:1; //!< \brief 1 if the last SCAN_RSP was successfully received and <code>upperLimit</code>
//!< not changed
uint8_t bLastFailed:1; //!< \brief 1 if reception of the last SCAN_RSP failed and <code>upperLimit</code> was not
//!< changed
} backoffPar;
uint8_t scanReqLen; //!< Size of scan request data
uint8_t* pScanReqData; //!< Pointer to buffer containing SCAN_REQ data
uint16_t* pDeviceAddress; //!< Pointer to device address used for this device
rfc_bleWhiteListEntry_t *pWhiteList; //!< Pointer to white list
uint16_t __dummy0;
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} timeoutTrigger; //!< Trigger that causes the device to stop receiving as soon as allowed
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} endTrigger; //!< Trigger that causes the device to stop receiving as soon as allowed
ratmr_t timeoutTime; //!< \brief Time used together with <code>timeoutTrigger</code> that causes the device to stop
//!< receiving as soon as allowed, ending with BLE_DONE_RXTIMEOUT
ratmr_t endTime; //!< \brief Time used together with <code>endTrigger</code> that causes the device to stop
//!< receiving as soon as allowed, ending with BLE_DONE_ENDED
};
//! @}
//! \addtogroup bleInitiatorPar
//! @{
//! Parameter structure for initiator (CMD_BLE_INITIATOR)
struct __RFC_STRUCT rfc_bleInitiatorPar_s {
dataQueue_t* pRxQ; //!< Pointer to receive queue
struct {
uint8_t bAutoFlushIgnored:1; //!< If 1, automatically remove ignored packets from Rx queue
uint8_t bAutoFlushCrcErr:1; //!< If 1, automatically remove packets with CRC error from Rx queue
uint8_t bAutoFlushEmpty:1; //!< If 1, automatically remove empty packets from Rx queue
uint8_t bIncludeLenByte:1; //!< If 1, include the received length byte in the stored packet; otherwise discard it
uint8_t bIncludeCrc:1; //!< If 1, include the received CRC field in the stored packet; otherwise discard it
uint8_t bAppendRssi:1; //!< If 1, append an RSSI byte to the packet in the Rx queue
uint8_t bAppendStatus:1; //!< If 1, append a status byte to the packet in the Rx queue
uint8_t bAppendTimestamp:1; //!< If 1, append a timestamp to the packet in the Rx queue
} rxConfig; //!< Configuration bits for the receive queue entries
struct {
uint8_t bUseWhiteList:1; //!< \brief Initiator filter policy, cf. Volume 2, Part E, Section 7.8.10 of the
//!< Bluetooth 4.0 spec:<br>
//!< 0: Use specific peer address<br>
//!< 1: Use white list
uint8_t bDynamicWinOffset:1; //!< 1: Use dynamic WinOffset insertion
uint8_t deviceAddrType:1; //!< The type of the device address &ndash; public (0) or random (1)
uint8_t peerAddrType:1; //!< The type of the peer address &ndash; public (0) or random (1)
uint8_t bStrictLenFilter:1; //!< 1: Discard messages with illegal length
} initConfig;
uint8_t __dummy0;
uint8_t connectReqLen; //!< Size of connect request data
uint8_t* pConnectReqData; //!< Pointer to buffer containing LLData to go in the CONNECT_REQ
uint16_t* pDeviceAddress; //!< Pointer to device address used for this device
rfc_bleWhiteListEntry_t *pWhiteList; //!< Pointer to white list or peer address
ratmr_t connectTime; //!< \brief Indication of timer value of the first possible start time of the first connection event.
//!< Set to the calculated value if a connection is made and to the next possible connection
//!< time if not.
uint16_t __dummy1;
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} timeoutTrigger; //!< Trigger that causes the device to stop receiving as soon as allowed
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} endTrigger; //!< Trigger that causes the device to stop receiving as soon as allowed
ratmr_t timeoutTime; //!< \brief Time used together with <code>timeoutTrigger</code> that causes the device to stop
//!< receiving as soon as allowed, ending with BLE_DONE_RXTIMEOUT
ratmr_t endTime; //!< \brief Time used together with <code>endTrigger</code> that causes the device to stop
//!< receiving as soon as allowed, ending with BLE_DONE_ENDED
};
//! @}
//! \addtogroup bleGenericRxPar
//! @{
//! Parameter structure for generic Rx (CMD_BLE_GENERIC_RX)
struct __RFC_STRUCT rfc_bleGenericRxPar_s {
dataQueue_t* pRxQ; //!< Pointer to receive queue. May be NULL; if so, received packets are not stored
struct {
uint8_t bAutoFlushIgnored:1; //!< If 1, automatically remove ignored packets from Rx queue
uint8_t bAutoFlushCrcErr:1; //!< If 1, automatically remove packets with CRC error from Rx queue
uint8_t bAutoFlushEmpty:1; //!< If 1, automatically remove empty packets from Rx queue
uint8_t bIncludeLenByte:1; //!< If 1, include the received length byte in the stored packet; otherwise discard it
uint8_t bIncludeCrc:1; //!< If 1, include the received CRC field in the stored packet; otherwise discard it
uint8_t bAppendRssi:1; //!< If 1, append an RSSI byte to the packet in the Rx queue
uint8_t bAppendStatus:1; //!< If 1, append a status byte to the packet in the Rx queue
uint8_t bAppendTimestamp:1; //!< If 1, append a timestamp to the packet in the Rx queue
} rxConfig; //!< Configuration bits for the receive queue entries
uint8_t bRepeat; //!< \brief 0: End operation after receiving a packet<br>
//!< 1: Restart receiver after receiving a packet
uint16_t __dummy0;
uint32_t accessAddress; //!< Access address used on the connection
uint8_t crcInit0; //!< CRC initialization value used on the connection &ndash; least significant byte
uint8_t crcInit1; //!< CRC initialization value used on the connection &ndash; middle byte
uint8_t crcInit2; //!< CRC initialization value used on the connection &ndash; most significant byte
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} endTrigger; //!< Trigger that causes the device to end the Rx operation
ratmr_t endTime; //!< \brief Time used together with <code>endTrigger</code> that causes the device to end the
//!< Rx operation
};
//! @}
//! \addtogroup bleTxTestPar
//! @{
//! Parameter structure for Tx test (CMD_BLE_TX_TEST)
struct __RFC_STRUCT rfc_bleTxTestPar_s {
uint16_t numPackets; //!< \brief Number of packets to transmit<br>
//!< 0: Transmit unlimited number of packets
uint8_t payloadLength; //!< The number of payload bytes in each packet.
uint8_t packetType; //!< \brief The packet type to be used, encoded according to the Bluetooth 4.0 spec, Volume 2, Part E,
//!< Section 7.8.29
ratmr_t period; //!< Number of radio timer cycles between the start of each packet
struct {
uint8_t bOverrideDefault:1; //!< \brief 0: Use default packet encoding<br>
//!< 1: Override packet contents
uint8_t bUsePrbs9:1; //!< \brief If <code>bOverride</code> is 1:<br>
//!< 1: Use PRBS9 encoding of packet
uint8_t bUsePrbs15:1; //!< \brief If <code>bOverride</code> is 1:<br>
//!< 1: Use PRBS15 encoding of packet
} config;
uint8_t byteVal; //!< If <code>config.bOverride</code> is 1, value of each byte to be sent
uint8_t __dummy0;
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} endTrigger; //!< Trigger that causes the device to end the Test Tx operation
ratmr_t endTime; //!< \brief Time used together with <code>endTrigger</code> that causes the device to end the
//!< Test Tx operation
};
//! @}
//! \addtogroup bleMasterSlaveOutput
//! @{
//! Output structure for master and slave (CMD_BLE_MASTER/CMD_BLE_SLAVE)
struct __RFC_STRUCT rfc_bleMasterSlaveOutput_s {
uint8_t nTx; //!< \brief Total number of packets (including auto-empty and retransmissions) that have been
//!< transmitted
uint8_t nTxAck; //!< Total number of transmitted packets (including auto-empty) that have been ACK'ed
uint8_t nTxCtrl; //!< Number of unique LL control packets from the Tx queue that have been transmitted
uint8_t nTxCtrlAck; //!< Number of LL control packets from the Tx queue that have been finished (ACK'ed)
uint8_t nTxCtrlAckAck; //!< \brief Number of LL control packets that have been ACK'ed and where an ACK has been sent in
//!< response
uint8_t nTxRetrans; //!< Number of retransmissions that has been done
uint8_t nTxEntryDone; //!< Number of packets from the Tx queue that have been finished (ACK'ed)
uint8_t nRxOk; //!< Number of packets that have been received with payload, CRC OK and not ignored
uint8_t nRxCtrl; //!< Number of LL control packets that have been received with CRC OK and not ignored
uint8_t nRxCtrlAck; //!< \brief Number of LL control packets that have been received with CRC OK and not ignored, and
//!< then ACK'ed
uint8_t nRxNok; //!< Number of packets that have been received with CRC error
uint8_t nRxIgnored; //!< \brief Number of packets that have been received with CRC OK and ignored due to repeated
//!< sequence number
uint8_t nRxEmpty; //!< Number of packets that have been received with CRC OK and no payload
uint8_t nRxBufFull; //!< Number of packets that have been received and discarded due to lack of buffer space
int8_t lastRssi; //!< RSSI of last received packet
struct {
uint8_t bTimeStampValid:1; //!< 1 if a valid time stamp has been written to timeStamp; 0 otherwise
uint8_t bLastCrcErr:1; //!< 1 if the last received packet had CRC error; 0 otherwise
uint8_t bLastIgnored:1; //!< 1 if the last received packet with CRC OK was ignored; 0 otherwise
uint8_t bLastEmpty:1; //!< 1 if the last received packet with CRC OK was empty; 0 otherwise
uint8_t bLastCtrl:1; //!< 1 if the last received packet with CRC OK was empty; 0 otherwise
uint8_t bLastMd:1; //!< 1 if the last received packet with CRC OK had MD = 1; 0 otherwise
uint8_t bLastAck:1; //!< \brief 1 if the last received packet with CRC OK was an ACK of a transmitted packet;
//!< 0 otherwise
} pktStatus;
ratmr_t timeStamp; //!< Slave operation: Time stamp of first received packet
};
//! @}
//! \addtogroup bleAdvOutput
//! @{
//! Output structure for advertiser (CMD_BLE_ADV*)
struct __RFC_STRUCT rfc_bleAdvOutput_s {
uint16_t nTxAdvInd; //!< Number of ADV*_IND packets completely transmitted
uint8_t nTxScanRsp; //!< Number of SCAN_RSP packets transmitted
uint8_t nRxScanReq; //!< Number of SCAN_REQ packets received OK and not ignored
uint8_t nRxConnectReq; //!< Number of CONNECT_REQ packets received OK and not ignored
uint8_t __dummy0;
uint16_t nRxNok; //!< Number of packets received with CRC error
uint16_t nRxIgnored; //!< Number of packets received with CRC OK, but ignored
uint8_t nRxBufFull; //!< Number of packets received that did not fit in Rx queue
int8_t lastRssi; //!< The RSSI of the last received packet
ratmr_t timeStamp; //!< Time stamp of the last received packet
};
//! @}
//! \addtogroup bleScannerOutput
//! @{
//! Output structure for scanner (CMD_BLE_SCANNER)
struct __RFC_STRUCT rfc_bleScannerOutput_s {
uint16_t nTxScanReq; //!< Number of transmitted SCAN_REQ packets
uint16_t nBackedOffScanReq; //!< Number of SCAN_REQ packets not sent due to backoff procedure
uint16_t nRxAdvOk; //!< Number of ADV*_IND packets received with CRC OK and not ignored
uint16_t nRxAdvIgnored; //!< Number of ADV*_IND packets received with CRC OK, but ignored
uint16_t nRxAdvNok; //!< Number of ADV*_IND packets received with CRC error
uint16_t nRxScanRspOk; //!< Number of SCAN_RSP packets received with CRC OK and not ignored
uint16_t nRxScanRspIgnored; //!< Number of SCAN_RSP packets received with CRC OK, but ignored
uint16_t nRxScanRspNok; //!< Number of SCAN_RSP packets received with CRC error
uint8_t nRxAdvBufFull; //!< Number of ADV*_IND packets received that did not fit in Rx queue
uint8_t nRxScanRspBufFull; //!< Number of SCAN_RSP packets received that did not fit in Rx queue
int8_t lastRssi; //!< The RSSI of the last received packet
uint8_t __dummy0;
ratmr_t timeStamp; //!< Time stamp of the last successfully received ADV*_IND packet that was not ignored
};
//! @}
//! \addtogroup bleInitiatorOutput
//! @{
//! Output structure for initiator (CMD_BLE_INITIATOR)
struct __RFC_STRUCT rfc_bleInitiatorOutput_s {
uint8_t nTxConnectReq; //!< Number of transmitted CONNECT_REQ packets
uint8_t nRxAdvOk; //!< Number of ADV*_IND packets received with CRC OK and not ignored
uint16_t nRxAdvIgnored; //!< Number of ADV*_IND packets received with CRC OK, but ignored
uint16_t nRxAdvNok; //!< Number of ADV*_IND packets received with CRC error
uint8_t nRxAdvBufFull; //!< Number of ADV*_IND packets received that did not fit in Rx queue
int8_t lastRssi; //!< The RSSI of the last received packet
ratmr_t timeStamp; //!< Time stamp of the received ADV*_IND packet that caused transmission of CONNECT_REQ
};
//! @}
//! \addtogroup bleGenericRxOutput
//! @{
//! Output structure for generic Rx (CMD_BLE_GENERIC_RX)
struct __RFC_STRUCT rfc_bleGenericRxOutput_s {
uint16_t nRxOk; //!< Number of packets received with CRC OK
uint16_t nRxNok; //!< Number of packets received with CRC error
uint16_t nRxBufFull; //!< Number of packets that have been received and discarded due to lack of buffer space
int8_t lastRssi; //!< The RSSI of the last received packet
uint8_t __dummy0;
ratmr_t timeStamp; //!< Time stamp of the last received packet
};
//! @}
//! \addtogroup bleTxTestOutput
//! @{
//! Output structure for Tx test (CMD_BLE_TX_TEST)
struct __RFC_STRUCT rfc_bleTxTestOutput_s {
uint16_t nTx; //!< Number of packets transmitted
};
//! @}
//! \addtogroup bleWhiteListEntry
//! @{
//! White list entry structure
struct __RFC_STRUCT rfc_bleWhiteListEntry_s {
uint8_t size; //!< Number of while list entries. Used in the first entry of the list only
struct {
uint8_t bEnable:1; //!< 1 if the entry is in use, 0 if the entry is not in use
uint8_t addrType:1; //!< The type address in the entry &ndash; public (0) or random (1)
uint8_t bWlIgn:1; //!< \brief 1 if the entry is to be ignored by a scanner, 0 otherwise. Used to mask out
//!< entries that have already been scanned and reported.
} conf;
uint16_t address; //!< Least significant 16 bits of the address contained in the entry
uint32_t addressHi; //!< Most significant 32 bits of the address contained in the entry
};
//! @}
//! \addtogroup bleRxStatus
//! @{
//! Receive status byte that may be appended to message in receive buffer
struct __RFC_STRUCT rfc_bleRxStatus_s {
struct {
uint8_t channel:6; //!< \brief The channel on which the packet was received, provided channel is in the range
//!< 0&ndash;39; otherwise 0x3F
uint8_t bIgnore:1; //!< 1 if the packet is marked as ignored, 0 otherwise
uint8_t bCrcErr:1; //!< 1 if the packet was received with CRC error, 0 otherwise
} status;
};
//! @}
//! @}
//! @}
#endif /* BLE_CMD_H_ */