contiki/doc/radioinit

Entries in ram are processed by SMACinitfrommemory and executeentry
(which does the work). I suspect that these entries are loaded in from
the rom from the rom_data_init call in the beginning stub. For now
we'll do the simple thing of performing the actions they do, but for
real it would be better to load out from ROM and execute the entries
in a similar way. That way, if the cal data changes in the ROM, our
code should still work.

When radioinit first starts it seems to do checks for a 24MHZ clock
and if the buck should be enabled. Assuming 24MHZ and no buck the next
things it does is 5 entries in cal1 (40 bytes, 4 bytes per word, = 10
words, 2 words per entry = 5 entrys)

0x80003048      
0x00000f78      

0x8000304c      
0x00607707

the next entry is zero addr with val 0x000161a8... this is a delay
entry. Loop here 0x000161a8 times. then return.

0x00000000      
0x000161a8

Then two more memory stuffs:

0x8000a050      
0x0000047b

0x8000a054      
0x0000007b 

then it seems like the emulator dies on the stack munging they do at
the end of InitFromMemory... but I think I've decoded the entry
enough to figure out the rest.

but it looks like they then redo the first entry in cal1

0x80003048      
0x00000f78      

then they do 11 entries in cal3 (need dump)

then 4 entries from r5+24 (need to check what r5 has... 0x4051e4
should dump this)

then 44 regreplacment entries

then flash init. (hrmm.. this might be important)

then flyback init.

then some other stuff. (need to check this out closley)