diff --git a/dev/cc1200/cc1200-868-fsk-1-2kbps.c b/dev/cc1200/cc1200-868-fsk-1-2kbps.c
new file mode 100644
index 000000000..390779e1f
--- /dev/null
+++ b/dev/cc1200/cc1200-868-fsk-1-2kbps.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright (c) 2015, Weptech elektronik GmbH Germany
+ * http://www.weptech.de
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * This file is part of the Contiki operating system.
+ */
+
+#include "cc1200-rf-cfg.h"
+#include "cc1200-const.h"
+
+/*
+ * This is a setup for the following configuration:
+ *
+ * cc1200 at 1.2 kbps, 2-FSK, 12.5 kHz Channel Spacing (868 MHz).
+ */
+
+/* Base frequency in kHz */
+#define RF_CFG_CHAN_CENTER_F0           867787
+/* Channel spacing in Hz */
+#define RF_CFG_CHAN_SPACING             12500
+/* The minimum channel */
+#define RF_CFG_MIN_CHANNEL              0
+/* The maximum channel */
+#define RF_CFG_MAX_CHANNEL              33
+/* The maximum output power in dBm */
+#define RF_CFG_MAX_TXPOWER              CC1200_CONST_TX_POWER_MAX
+/* The carrier sense level used for CCA in dBm */
+#define RF_CFG_CCA_THRESHOLD            (-91)
+/* The RSSI offset in dBm */
+#define RF_CFG_RSSI_OFFSET              (-99)
+/*---------------------------------------------------------------------------*/
+static const char rf_cfg_descriptor[] = "868MHz 2-FSK 1.2 kbps";
+/*---------------------------------------------------------------------------*/
+/* 
+ * Register settings exported from SmartRF Studio using the standard template
+ * "trxEB RF Settings Performance Line".
+ */
+
+// Modulation format = 2-FSK
+// Whitening = false
+// Symbol rate = 1.2
+// Deviation = 3.986359
+// Carrier frequency = 867.999878
+// Manchester enable = false
+// Bit rate = 1.2
+// RX filter BW = 10.964912
+
+static const registerSetting_t preferredSettings[]=
+{
+  {CC1200_IOCFG2,            0x06},
+  {CC1200_DEVIATION_M,       0xD1},
+  {CC1200_MODCFG_DEV_E,      0x00},
+  {CC1200_DCFILT_CFG,        0x5D},
+  {CC1200_PREAMBLE_CFG0,     0x8A},
+  {CC1200_IQIC,              0xCB},
+  {CC1200_CHAN_BW,           0xA6},
+  {CC1200_MDMCFG1,           0x40},
+  {CC1200_MDMCFG0,           0x05},
+  {CC1200_SYMBOL_RATE2,      0x3F},
+  {CC1200_SYMBOL_RATE1,      0x75},
+  {CC1200_SYMBOL_RATE0,      0x10},
+  {CC1200_AGC_REF,           0x20},
+  {CC1200_AGC_CS_THR,        0xEC},
+  {CC1200_AGC_CFG1,          0x51},
+  {CC1200_AGC_CFG0,          0x87},
+  {CC1200_FIFO_CFG,          0x00},
+  {CC1200_FS_CFG,            0x12},
+  {CC1200_PKT_CFG2,          0x00},
+  {CC1200_PKT_CFG0,          0x20},
+  {CC1200_PKT_LEN,           0xFF},
+  {CC1200_IF_MIX_CFG,        0x1C},
+  {CC1200_FREQOFF_CFG,       0x22},
+  {CC1200_MDMCFG2,           0x0C},
+  {CC1200_FREQ2,             0x56},
+  {CC1200_FREQ1,             0xCC},
+  {CC1200_FREQ0,             0xCC},
+  {CC1200_IF_ADC1,           0xEE},
+  {CC1200_IF_ADC0,           0x10},
+  {CC1200_FS_DIG1,           0x07},
+  {CC1200_FS_DIG0,           0xAF},
+  {CC1200_FS_CAL1,           0x40},
+  {CC1200_FS_CAL0,           0x0E},
+  {CC1200_FS_DIVTWO,         0x03},
+  {CC1200_FS_DSM0,           0x33},
+  {CC1200_FS_DVC0,           0x17},
+  {CC1200_FS_PFD,            0x00},
+  {CC1200_FS_PRE,            0x6E},
+  {CC1200_FS_REG_DIV_CML,    0x1C},
+  {CC1200_FS_SPARE,          0xAC},
+  {CC1200_FS_VCO0,           0xB5},
+  {CC1200_XOSC5,             0x0E},
+  {CC1200_XOSC1,             0x03},
+};
+/*---------------------------------------------------------------------------*/
+/* Global linkage: symbol name must be different in each exported file! */
+const cc1200_rf_cfg_t cc1200_868_fsk_1_2kbps = {
+  .cfg_descriptor = rf_cfg_descriptor,
+  .register_settings = preferredSettings,
+  .size_of_register_settings = sizeof(preferredSettings),
+  .tx_pkt_lifetime = (2 * RTIMER_SECOND),
+  .chan_center_freq0 = RF_CFG_CHAN_CENTER_F0,
+  .chan_spacing = RF_CFG_CHAN_SPACING,
+  .min_channel = RF_CFG_MIN_CHANNEL,
+  .max_channel = RF_CFG_MAX_CHANNEL,
+  .max_txpower = RF_CFG_MAX_TXPOWER,
+  .cca_threshold = RF_CFG_CCA_THRESHOLD,
+  .rssi_offset = RF_CFG_RSSI_OFFSET,
+};
+/*---------------------------------------------------------------------------*/