fix typos

This commit is contained in:
maralvira 2010-11-11 20:37:33 +00:00
parent 9552ba40bd
commit 3426eae031

View File

@ -8,7 +8,7 @@ enables you to set up a route-over 6LowPAN network.
This tutorial will show you how to run Contiki's RPL demos on Redwire
Econotags.
1). Obtain Redwire Econotags, or other mc1322x hardware.
1) Obtain Redwire Econotags, or other mc1322x hardware.
---------------------------------------------------------------
See [the mc1322x hardware](http://mc1322x.devl.org/hardware.html) for
@ -21,7 +21,7 @@ all the necessary pins to load, erase, and reset the mc13224v. The
other port is connected to the JTAG pins for run-time debugging. **No
other programming hardware is necessary. Just your computer!**
2). Get a toolchain, and Contiki source.
2) Get a toolchain, and Contiki source.
----------------------------------------
Everything you need is in [Instant Contiki
@ -38,10 +38,10 @@ Development of the mc1322x port occurs in a different branch from the
main Contiki CVS repository. The most current mc1322x contiki port can be found here:
[contik-mc1322x.git](http://git.devl.org/?p=malvira/contiki-mc1322x.git)
3). Build the border-router and rpl-udp
3) Build the border-router and rpl-udp
---------------------------------------
The RPL demo consists of a "Border router" and at least on other RPL
The RPL demo consists of a "Border router" and at least one other RPL
enabled node. For this tutorial, the border router creates a RPL DAG
and is the ROOT. The other node will be a RPL udp-client. It joins the
RPL network, acts as an RPL router, and sends a UDP datagram to a
@ -68,7 +68,7 @@ To build the udp-client, do:
which will build 'udp-client_redbee-econotag.bin'.
4). Load the binaries on the the Econotags:
4) Load the binaries on the Econotags:
-------------------------------------------
### a) Run the econotags with randomized MAC addresses (random, but persistent)
@ -89,7 +89,7 @@ you haven't programmed one in:
fe80:0000:0000:0000:0250:c2ff:fea8:c266
Tentative global IPv6 address aaaa:0000:0000:0000:0250:c2ff:fea8:c266
This mac address is used to derive it's IPv6 address. In this example,
This mac address is used to derive its IPv6 address. In this example,
it's aaaa::0250:c2ff:fea8:c266.
The border router connects to your computer over a SLIP tunnel formed
@ -126,8 +126,7 @@ libmc1322x. See:
Then to flash the MAC address you can do:
mc1322x-load.pl -e -f flasher_redbee-econotag.bin -z -t /dev/ttyUSB1
-c 'bbmc -l redbee-econotag reset' 0x1e000,0xABC25000,0x010000C0
mc1322x-load.pl -e -f flasher_redbee-econotag.bin -z -t /dev/ttyUSB1 -c 'bbmc -l redbee-econotag reset' 0x1e000,0xABC25000,0x010000C0
+ -z to indicate you are sending a zero length binary to flasher.
+ -e causes mc1322x-load.pl to exit when it's done, instead of
@ -166,7 +165,7 @@ The RPL border-router serves a webpage that displays the known
neighbors and the known routes to all the node on the DAG. In firefox,
you can type in the following to go to a IPv6 address:
http://[address aaaa:0000:0000:0000:0250:c2ff:fea8:c266]
http://[aaaa:0000:0000:0000:0250:c2ff:fea8:c266]
#### Neighbors
fe80::250:c2ff:fea8:cbf4