mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-08-16 22:28:59 +00:00
Merge pull request #1520 from Zolertia/adc-fixed-channels
Added enabling up to 6 ADC channels and fixed adc-zoul driver problem.
This commit is contained in:
commit
520519860e
@ -218,9 +218,9 @@ main(void)
|
|||||||
#endif /* NETSTACK_CONF_WITH_IPV6 */
|
#endif /* NETSTACK_CONF_WITH_IPV6 */
|
||||||
|
|
||||||
process_start(&sensors_process, NULL);
|
process_start(&sensors_process, NULL);
|
||||||
|
#if PLATFOM_HAS_BUTTON
|
||||||
SENSORS_ACTIVATE(button_sensor);
|
SENSORS_ACTIVATE(button_sensor);
|
||||||
|
#endif
|
||||||
energest_init();
|
energest_init();
|
||||||
ENERGEST_ON(ENERGEST_TYPE_CPU);
|
ENERGEST_ON(ENERGEST_TYPE_CPU);
|
||||||
|
|
||||||
|
@ -175,7 +175,7 @@ configure(int type, int value)
|
|||||||
return ADC_WRAPPER_ERROR;
|
return ADC_WRAPPER_ERROR;
|
||||||
}
|
}
|
||||||
|
|
||||||
if((value < 0x01) || (value > 0x07) || (value == BUTTON_USER_PIN)) {
|
if((value < 0x01) || (value > 0x07) || ((value == BUTTON_USER_PIN) && (ADC_SENSORS_ADC6_PIN < 0))) {
|
||||||
PRINTF("ADC sensors: invalid pin value, (PA0-PA1, PA3) are reserved\n");
|
PRINTF("ADC sensors: invalid pin value, (PA0-PA1, PA3) are reserved\n");
|
||||||
return ADC_WRAPPER_ERROR;
|
return ADC_WRAPPER_ERROR;
|
||||||
}
|
}
|
||||||
|
@ -93,6 +93,9 @@ get_channel_pin(int type)
|
|||||||
if((ZOUL_SENSORS_ADC5) && (type == ZOUL_SENSORS_ADC5)) {
|
if((ZOUL_SENSORS_ADC5) && (type == ZOUL_SENSORS_ADC5)) {
|
||||||
return SOC_ADC_ADCCON_CH_AIN0 + ADC_SENSORS_ADC5_PIN;
|
return SOC_ADC_ADCCON_CH_AIN0 + ADC_SENSORS_ADC5_PIN;
|
||||||
}
|
}
|
||||||
|
if((ZOUL_SENSORS_ADC6) && (type == ZOUL_SENSORS_ADC6)) {
|
||||||
|
return SOC_ADC_ADCCON_CH_AIN0 + ADC_SENSORS_ADC6_PIN;
|
||||||
|
}
|
||||||
return ZOUL_SENSORS_ERROR;
|
return ZOUL_SENSORS_ERROR;
|
||||||
}
|
}
|
||||||
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
||||||
@ -154,9 +157,12 @@ configure(int type, int value)
|
|||||||
if(value & ZOUL_SENSORS_ADC5) {
|
if(value & ZOUL_SENSORS_ADC5) {
|
||||||
ioc_set_over(GPIO_A_NUM, ADC_SENSORS_ADC5_PIN, IOC_OVERRIDE_ANA);
|
ioc_set_over(GPIO_A_NUM, ADC_SENSORS_ADC5_PIN, IOC_OVERRIDE_ANA);
|
||||||
}
|
}
|
||||||
|
if(value & ZOUL_SENSORS_ADC6) {
|
||||||
|
ioc_set_over(GPIO_A_NUM, ADC_SENSORS_ADC6_PIN, IOC_OVERRIDE_ANA);
|
||||||
|
}
|
||||||
adc_init();
|
adc_init();
|
||||||
set_decimation_rate(SOC_ADC_ADCCON_DIV_512);
|
set_decimation_rate(SOC_ADC_ADCCON_DIV_512);
|
||||||
enabled_channels = value;
|
enabled_channels += value;
|
||||||
break;
|
break;
|
||||||
|
|
||||||
case ZOUL_SENSORS_CONFIGURE_TYPE_DECIMATION_RATE:
|
case ZOUL_SENSORS_CONFIGURE_TYPE_DECIMATION_RATE:
|
||||||
|
@ -38,7 +38,9 @@
|
|||||||
*
|
*
|
||||||
* Driver for the Zoul ADC interface
|
* Driver for the Zoul ADC interface
|
||||||
*
|
*
|
||||||
* This driver supports analogue sensors connected to ADC1, ADC2 and AND3 inputs
|
* This driver supports analogue sensors connected to ADC1, ADC2, ADC3,
|
||||||
|
* ADC4, ADC5 and ADC6 inputs. ADC6 is shared with the user button, so disable
|
||||||
|
* user button if ADC6 is needed.
|
||||||
* This is controlled by the type argument of the value() function. Possible
|
* This is controlled by the type argument of the value() function. Possible
|
||||||
* choices are:
|
* choices are:
|
||||||
*
|
*
|
||||||
@ -47,6 +49,7 @@
|
|||||||
* - ZOUL_SENSORS_ADC3
|
* - ZOUL_SENSORS_ADC3
|
||||||
* - ZOUL_SENSORS_ADC4
|
* - ZOUL_SENSORS_ADC4
|
||||||
* - ZOUL_SENSORS_ADC5
|
* - ZOUL_SENSORS_ADC5
|
||||||
|
* - ZOUL_SENSORS_ADC6
|
||||||
*
|
*
|
||||||
* To initialize the ADC sensors use the configure() function, using as first
|
* To initialize the ADC sensors use the configure() function, using as first
|
||||||
* argument SENSORS_HW_INIT, and choose which ADC channels to enable passing as
|
* argument SENSORS_HW_INIT, and choose which ADC channels to enable passing as
|
||||||
@ -128,13 +131,20 @@
|
|||||||
#else
|
#else
|
||||||
#define ZOUL_SENSORS_ADC5 0
|
#define ZOUL_SENSORS_ADC5 0
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
/* ADC phidget-like connector ADC6 */
|
||||||
|
#if ADC_SENSORS_ADC6_PIN >= ZOUL_SENSORS_ADC_MIN
|
||||||
|
#define ZOUL_SENSORS_ADC6 GPIO_PIN_MASK(ADC_SENSORS_ADC6_PIN)
|
||||||
|
#else
|
||||||
|
#define ZOUL_SENSORS_ADC6 0
|
||||||
|
#endif
|
||||||
/*
|
/*
|
||||||
* This is safe as the disabled sensors should have a zero value thus not
|
* This is safe as the disabled sensors should have a zero value thus not
|
||||||
* affecting the mask operations
|
* affecting the mask operations
|
||||||
*/
|
*/
|
||||||
#define ZOUL_SENSORS_ADC_ALL (ZOUL_SENSORS_ADC1 + ZOUL_SENSORS_ADC2 + \
|
#define ZOUL_SENSORS_ADC_ALL (ZOUL_SENSORS_ADC1 + ZOUL_SENSORS_ADC2 + \
|
||||||
ZOUL_SENSORS_ADC3 + ZOUL_SENSORS_ADC4 + \
|
ZOUL_SENSORS_ADC3 + ZOUL_SENSORS_ADC4 + \
|
||||||
ZOUL_SENSORS_ADC5)
|
ZOUL_SENSORS_ADC5 + ZOUL_SENSORS_ADC6)
|
||||||
/** @} */
|
/** @} */
|
||||||
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
||||||
extern const struct sensors_sensor adc_zoul;
|
extern const struct sensors_sensor adc_zoul;
|
||||||
|
@ -47,7 +47,12 @@
|
|||||||
#include <string.h>
|
#include <string.h>
|
||||||
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
||||||
/** \brief Exports global symbols for the sensor API */
|
/** \brief Exports global symbols for the sensor API */
|
||||||
SENSORS(&button_sensor, &vdd3_sensor, &cc2538_temp_sensor);
|
SENSORS(&vdd3_sensor,
|
||||||
|
#if PLATFORM_HAS_BUTTON
|
||||||
|
&button_sensor,
|
||||||
|
#endif
|
||||||
|
&cc2538_temp_sensor
|
||||||
|
);
|
||||||
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
||||||
/**
|
/**
|
||||||
* @}
|
* @}
|
||||||
|
@ -168,6 +168,92 @@
|
|||||||
#define UART1_RTS_PIN (-1) /**< 0 */
|
#define UART1_RTS_PIN (-1) /**< 0 */
|
||||||
/** @} */
|
/** @} */
|
||||||
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
||||||
|
/**
|
||||||
|
* \name ADC configuration
|
||||||
|
*
|
||||||
|
* These values configure which CC2538 pins and ADC channels to use for the ADC
|
||||||
|
* inputs. There pins are suggested as they can be changed, but note that only
|
||||||
|
* pins from PA can be configured as ADC.
|
||||||
|
*
|
||||||
|
* - ADC1: up to 3.3V.
|
||||||
|
* - ADC2: up to 3.3V.
|
||||||
|
* - ADC3: up to 3.3V.
|
||||||
|
* - ADC4: up to 3.3V.
|
||||||
|
* - ADC5: up to 3.3V.
|
||||||
|
* - ADC6: up to 3.3V, shared with user button.
|
||||||
|
*
|
||||||
|
* Only ADC1 and ADC3 are enabled as default.
|
||||||
|
*
|
||||||
|
* The internal ADC reference is 1190mV, use either a voltage divider as input,
|
||||||
|
* or a different voltage reference, like AVDD5 or other externally (AIN7 or
|
||||||
|
* AIN6).
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
#define ADC_SENSORS_PORT GPIO_A_NUM /**< ADC GPIO control port */
|
||||||
|
|
||||||
|
#ifndef ADC_SENSORS_CONF_ADC1_PIN
|
||||||
|
#define ADC_SENSORS_ADC1_PIN 5 /**< ADC1 to PA5 */
|
||||||
|
#else
|
||||||
|
#if ((ADC_SENSORS_CONF_ADC1_PIN != -1) && (ADC_SENSORS_CONF_ADC1_PIN != 5))
|
||||||
|
#error "ADC1 channel should be mapped to PA5 or disabled with -1"
|
||||||
|
#else
|
||||||
|
#define ADC_SENSORS_ADC1_PIN ADC_SENSORS_CONF_ADC1_PIN
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef ADC_SENSORS_CONF_ADC2_PIN
|
||||||
|
#define ADC_SENSORS_ADC2_PIN 4 /**< ADC2 to PA4 */
|
||||||
|
#else
|
||||||
|
#if ((ADC_SENSORS_CONF_ADC2_PIN != -1) && (ADC_SENSORS_CONF_ADC2_PIN != 4))
|
||||||
|
#error "ADC2 channel should be mapped to PA4 or disabled with -1"
|
||||||
|
#else
|
||||||
|
#define ADC_SENSORS_ADC2_PIN ADC_SENSORS_CONF_ADC2_PIN
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef ADC_SENSORS_CONF_ADC3_PIN
|
||||||
|
#define ADC_SENSORS_ADC3_PIN 2 /**< ADC3 to PA2 */
|
||||||
|
#else
|
||||||
|
#if ((ADC_SENSORS_CONF_ADC3_PIN != -1) && (ADC_SENSORS_CONF_ADC3_PIN != 2))
|
||||||
|
#error "ADC3 channel should be mapped to PA2 or disabled with -1"
|
||||||
|
#else
|
||||||
|
#define ADC_SENSORS_ADC3_PIN ADC_SENSORS_CONF_ADC3_PIN
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef ADC_SENSORS_CONF_ADC4_PIN
|
||||||
|
#define ADC_SENSORS_ADC4_PIN 6 /**< ADC4 to PA6 */
|
||||||
|
#else
|
||||||
|
#if ((ADC_SENSORS_CONF_ADC4_PIN != -1) && (ADC_SENSORS_CONF_ADC4_PIN != 6))
|
||||||
|
#error "ADC4 channel should be mapped to PA6 or disabled with -1"
|
||||||
|
#else
|
||||||
|
#define ADC_SENSORS_ADC4_PIN ADC_SENSORS_CONF_ADC4_PIN
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef ADC_SENSORS_CONF_ADC5_PIN
|
||||||
|
#define ADC_SENSORS_ADC5_PIN 7 /**< ADC5 to PA7 */
|
||||||
|
#else
|
||||||
|
#if ((ADC_SENSORS_CONF_ADC5_PIN != -1) && (ADC_SENSORS_CONF_ADC5_PIN != 7))
|
||||||
|
#error "ADC5 channel should be mapped to PA7 or disabled with -1"
|
||||||
|
#else
|
||||||
|
#define ADC_SENSORS_ADC5_PIN ADC_SENSORS_CONF_ADC5_PIN
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef ADC_SENSORS_CONF_ADC6_PIN
|
||||||
|
#define ADC_SENSORS_ADC6_PIN (-1) /**< ADC6 not declared */
|
||||||
|
#else
|
||||||
|
#define ADC_SENSORS_ADC6_PIN 3 /**< Hard-coded to PA3 */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef ADC_SENSORS_CONF_MAX
|
||||||
|
#define ADC_SENSORS_MAX 5 /**< Maximum sensors */
|
||||||
|
#else
|
||||||
|
#define ADC_SENSORS_MAX ADC_SENSORS_CONF_MAX
|
||||||
|
#endif
|
||||||
|
/** @} */
|
||||||
|
/*---------------------------------------------------------------------------*/
|
||||||
/** \name Firefly Button configuration
|
/** \name Firefly Button configuration
|
||||||
*
|
*
|
||||||
* Buttons on the Firefly are connected as follows:
|
* Buttons on the Firefly are connected as follows:
|
||||||
@ -180,31 +266,19 @@
|
|||||||
#define BUTTON_USER_PIN 3
|
#define BUTTON_USER_PIN 3
|
||||||
#define BUTTON_USER_VECTOR NVIC_INT_GPIO_PORT_A
|
#define BUTTON_USER_VECTOR NVIC_INT_GPIO_PORT_A
|
||||||
|
|
||||||
/* Notify various examples that we have Buttons */
|
/* Notify various examples that we have an user button.
|
||||||
#define PLATFORM_HAS_BUTTON 1
|
* If ADC6 channel is used, then disable the user button
|
||||||
/** @} */
|
|
||||||
/*---------------------------------------------------------------------------*/
|
|
||||||
/**
|
|
||||||
* \name ADC configuration
|
|
||||||
*
|
|
||||||
* These values configure which CC2538 pins and ADC channels to use for the ADC
|
|
||||||
* inputs. There pins are suggested as they can be changed, but note that only
|
|
||||||
* pins from PA can be configured as ADC.
|
|
||||||
*
|
|
||||||
* The Firefly, as it is, only allows 3.3VDC sensors.
|
|
||||||
*
|
|
||||||
* The internal ADC reference is 1190mV, use either a voltage divider as input,
|
|
||||||
* or a different voltage reference, like AVDD5 or other externally (AIN7 or
|
|
||||||
* AIN6).
|
|
||||||
* @{
|
|
||||||
*/
|
*/
|
||||||
#define ADC_SENSORS_PORT GPIO_A_NUM /**< ADC GPIO control port */
|
#ifdef PLATFORM_CONF_WITH_BUTTON
|
||||||
#define ADC_SENSORS_ADC1_PIN 5 /**< ADC1 to PA5, 3V3 */
|
#if (PLATFORM_CONF_WITH_BUTTON && (ADC_SENSORS_ADC6_PIN == 3))
|
||||||
#define ADC_SENSORS_ADC2_PIN 4 /**< ADC2 to PA4, 3V3 */
|
#error "The ADC6 (PA3) and user button cannot be enabled at the same time"
|
||||||
#define ADC_SENSORS_ADC3_PIN 2 /**< ADC3 to PA2, 3V3 */
|
#else
|
||||||
#define ADC_SENSORS_ADC4_PIN 6 /**< ADC4 to PA6, 3V3 */
|
#define PLATFORM_HAS_BUTTON (PLATFORM_CONF_WITH_BUTTON && \
|
||||||
#define ADC_SENSORS_ADC5_PIN 7 /**< ADC5 to PA7, 3V3 */
|
!(ADC_SENSORS_ADC6_PIN == 3))
|
||||||
#define ADC_SENSORS_MAX 5 /**< PA2, PA4, PA5, PA6, PA7 */
|
#endif /* (PLATFORM_CONF_WITH_BUTTON && (ADC_SENSORS_ADC6_PIN == 3)) */
|
||||||
|
#else
|
||||||
|
#define PLATFORM_HAS_BUTTON !(ADC_SENSORS_ADC6_PIN == 3)
|
||||||
|
#endif /* PLATFORM_CONF_WITH_BUTTON */
|
||||||
/** @} */
|
/** @} */
|
||||||
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
||||||
/**
|
/**
|
||||||
|
@ -171,23 +171,6 @@
|
|||||||
#define UART1_RTS_PIN (-1)
|
#define UART1_RTS_PIN (-1)
|
||||||
/** @} */
|
/** @} */
|
||||||
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
||||||
/** \name RE-Mote Button configuration
|
|
||||||
*
|
|
||||||
* Buttons on the RE-Mote are connected as follows:
|
|
||||||
* - BUTTON_USER -> PA3, S1 user button, shared with bootloader and RTC_INT1
|
|
||||||
* - BUTTON_RESET -> RESET_N line, S2 reset both CC2538 and CoP
|
|
||||||
* - BUTTON_PIC1W -> shared with SHUTDOWN_ENABLE, not mounted.
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/** BUTTON_USER -> PA3 */
|
|
||||||
#define BUTTON_USER_PORT GPIO_A_NUM
|
|
||||||
#define BUTTON_USER_PIN 3
|
|
||||||
#define BUTTON_USER_VECTOR NVIC_INT_GPIO_PORT_A
|
|
||||||
|
|
||||||
/* Notify various examples that we have Buttons */
|
|
||||||
#define PLATFORM_HAS_BUTTON 1
|
|
||||||
/** @} */
|
|
||||||
/*---------------------------------------------------------------------------*/
|
|
||||||
/**
|
/**
|
||||||
* \name ADC configuration
|
* \name ADC configuration
|
||||||
*
|
*
|
||||||
@ -201,6 +184,12 @@
|
|||||||
* - ADC2: up to 3.3V, shared with RTC_INT
|
* - ADC2: up to 3.3V, shared with RTC_INT
|
||||||
* - ADC3: up to 5V, by means of a 2/3 voltage divider.
|
* - ADC3: up to 5V, by means of a 2/3 voltage divider.
|
||||||
*
|
*
|
||||||
|
* Also there are other ADC channels shared by default with Micro SD card and
|
||||||
|
* user button implementations:
|
||||||
|
* - ADC4: up to 3.3V.
|
||||||
|
* - ADC5: up to 3.3V.
|
||||||
|
* - ADC6: up to 3.3V.
|
||||||
|
*
|
||||||
* ADC inputs can only be on port A.
|
* ADC inputs can only be on port A.
|
||||||
* All ADCx are exposed in JP5 connector, but only ADC1 and ADC3 have GND and
|
* All ADCx are exposed in JP5 connector, but only ADC1 and ADC3 have GND and
|
||||||
* VDD (3/5V) pins next to it, so these can be exposed into a 3-pin phidget-like
|
* VDD (3/5V) pins next to it, so these can be exposed into a 3-pin phidget-like
|
||||||
@ -216,12 +205,84 @@
|
|||||||
* @{
|
* @{
|
||||||
*/
|
*/
|
||||||
#define ADC_SENSORS_PORT GPIO_A_NUM /**< ADC GPIO control port */
|
#define ADC_SENSORS_PORT GPIO_A_NUM /**< ADC GPIO control port */
|
||||||
|
|
||||||
|
#ifndef ADC_SENSORS_CONF_ADC1_PIN
|
||||||
#define ADC_SENSORS_ADC1_PIN 5 /**< ADC1 to PA5, 3V3 */
|
#define ADC_SENSORS_ADC1_PIN 5 /**< ADC1 to PA5, 3V3 */
|
||||||
#define ADC_SENSORS_ADC2_PIN (-1) /**< ADC2 to PA4, 3V3 */
|
#else
|
||||||
#define ADC_SENSORS_ADC3_PIN 2 /**< ADC3 to PA2, 5V0 */
|
#if ((ADC_SENSORS_CONF_ADC1_PIN != -1) && (ADC_SENSORS_CONF_ADC1_PIN != 5))
|
||||||
#define ADC_SENSORS_ADC4_PIN (-1) /**< Not present */
|
#error "ADC1 channel should be mapped to PA5 or disabled with -1"
|
||||||
#define ADC_SENSORS_ADC5_PIN (-1) /**< Not present */
|
#else
|
||||||
#define ADC_SENSORS_MAX 2 /**< PA2, PA5 */
|
#define ADC_SENSORS_ADC1_PIN ADC_SENSORS_CONF_ADC1_PIN
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef ADC_SENSORS_CONF_ADC3_PIN
|
||||||
|
#define ADC_SENSORS_ADC3_PIN 2 /**< ADC3 to PA2, 5V */
|
||||||
|
#else
|
||||||
|
#if ((ADC_SENSORS_CONF_ADC3_PIN != -1) && (ADC_SENSORS_CONF_ADC3_PIN != 2))
|
||||||
|
#error "ADC3 channel should be mapped to PA2 or disabled with -1"
|
||||||
|
#else
|
||||||
|
#define ADC_SENSORS_ADC3_PIN ADC_SENSORS_CONF_ADC3_PIN
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef ADC_SENSORS_CONF_ADC2_PIN
|
||||||
|
#define ADC_SENSORS_ADC2_PIN (-1) /**< ADC2 no declared */
|
||||||
|
#else
|
||||||
|
#define ADC_SENSORS_ADC2_PIN 4 /**< Hard-coded to PA4 */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef ADC_SENSORS_CONF_ADC4_PIN
|
||||||
|
#define ADC_SENSORS_ADC4_PIN (-1) /**< ADC4 not declared */
|
||||||
|
#else
|
||||||
|
#define ADC_SENSORS_ADC4_PIN 6 /**< Hard-coded to PA6 */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef ADC_SENSORS_CONF_ADC5_PIN
|
||||||
|
#define ADC_SENSORS_ADC5_PIN (-1) /**< ADC5 not declared */
|
||||||
|
#else
|
||||||
|
#define ADC_SENSORS_ADC5_PIN 7 /**< Hard-coded to PA7 */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef ADC_SENSORS_CONF_ADC6_PIN
|
||||||
|
#define ADC_SENSORS_ADC6_PIN (-1) /**< ADC6 not declared */
|
||||||
|
#else
|
||||||
|
#define ADC_SENSORS_ADC6_PIN 3 /**< Hard-coded to PA3 */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef ADC_SENSORS_CONF_MAX
|
||||||
|
#define ADC_SENSORS_MAX 2 /**< Maximum sensors */
|
||||||
|
#else
|
||||||
|
#define ADC_SENSORS_MAX ADC_SENSORS_CONF_MAX
|
||||||
|
#endif
|
||||||
|
/** @} */
|
||||||
|
/*---------------------------------------------------------------------------*/
|
||||||
|
/** \name RE-Mote Button configuration
|
||||||
|
*
|
||||||
|
* Buttons on the RE-Mote are connected as follows:
|
||||||
|
* - BUTTON_USER -> PA3, S1 user button, shared with bootloader and RTC_INT1
|
||||||
|
* - BUTTON_RESET -> RESET_N line, S2 reset both CC2538 and CoP
|
||||||
|
* - BUTTON_PIC1W -> shared with SHUTDOWN_ENABLE, not mounted.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
/** BUTTON_USER -> PA3 */
|
||||||
|
#define BUTTON_USER_PORT GPIO_A_NUM
|
||||||
|
#define BUTTON_USER_PIN 3
|
||||||
|
#define BUTTON_USER_VECTOR NVIC_INT_GPIO_PORT_A
|
||||||
|
|
||||||
|
/* Notify various examples that we have an user button.
|
||||||
|
* If ADC6 channel is used, then disable the user button
|
||||||
|
*/
|
||||||
|
#ifdef PLATFORM_CONF_WITH_BUTTON
|
||||||
|
#if (PLATFORM_CONF_WITH_BUTTON && (ADC_SENSORS_ADC6_PIN == 3))
|
||||||
|
#error "The ADC6 (PA3) and user button cannot be enabled at the same time"
|
||||||
|
#else
|
||||||
|
#define PLATFORM_HAS_BUTTON (PLATFORM_CONF_WITH_BUTTON && \
|
||||||
|
!(ADC_SENSORS_ADC6_PIN == 3))
|
||||||
|
#endif /* (PLATFORM_CONF_WITH_BUTTON && (ADC_SENSORS_ADC6_PIN == 3)) */
|
||||||
|
#else
|
||||||
|
#define PLATFORM_HAS_BUTTON !(ADC_SENSORS_ADC6_PIN == 3)
|
||||||
|
#endif /* PLATFORM_CONF_WITH_BUTTON */
|
||||||
/** @} */
|
/** @} */
|
||||||
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
||||||
/**
|
/**
|
||||||
|
Loading…
Reference in New Issue
Block a user