Update jackdaw to new radio driver interface

This commit is contained in:
dak664 2010-02-23 17:35:49 +00:00
parent a64a8674bc
commit 64d57a3dd8
3 changed files with 35 additions and 28 deletions

View File

@ -117,7 +117,15 @@ typedef int32_t s32_t;
#ifdef RF230BB
#define SICSLOWPAN_CONF_CONVENTIONAL_MAC 1 //for barebones driver, sicslowpan calls radio->read function
//#undef PACKETBUT_CONF_HDR_SIZE //RF230BB takes the packetbuf default for header size
//#undef PACKETBUF_CONF_HDR_SIZE //RF230BB takes the packetbuf default for header size
/* Network setup for IPv6 */
#define NETSTACK_CONF_NETWORK sicslowpan_driver
//#define NETSTACK_CONF_MAC nullmac_driver
#define NETSTACK_CONF_MAC csma_driver
//#define NETSTACK_CONF_RDC contikimac_driver
#define NETSTACK_CONF_RDC sicslowmac_driver
#define NETSTACK_CONF_RADIO rf230_driver
#endif
/* Fragmentation uses queuebuf.c to save packets */

View File

@ -98,7 +98,7 @@
#include "storage/storage_task.h"
#if RF230BB
#warning Experimental RF230BB radio selected
//#warning Experimental RF230BB radio selected
#define UIP_IP_BUF ((struct uip_ip_hdr *)&uip_buf[UIP_LLH_LEN])
extern int rf230_interrupt_flag;
extern uint8_t rf230processflag;
@ -161,8 +161,8 @@ main(void)
/* Clock */
clock_init();
/* rtimers not needed yet */
// rtimer_init();
/* rtimer init needed for low power protocols */
rtimer_init();
/* Process subsystem. */
process_init();
@ -170,21 +170,13 @@ main(void)
/* etimer process must be started before ctimer init */
process_start(&etimer_process, NULL);
#ifdef RF230BB
#if RF230BB
{
ctimer_init();
/* Start radio and radio receive process */
/* Note this starts RF230 process, so must be done after process_init */
rf230_init();
// set_rime_addr();
framer_set(&framer_802154);
queuebuf_init();
sicslowpan_init(MAC_DRIVER.init(&rf230_driver));
// sicslowpan_init(sicslowmac_init(&rf230_driver));
// sicslowpan_init(lpp_init(&rf230_driver));
// sicslowpan_init(cxmac_init(&rf230_driver));
/* Set addresses BEFORE starting tcpip process */
memset(&addr, 0, sizeof(rimeaddr_t));
@ -202,16 +194,22 @@ main(void)
macLongAddr.u8[7]=addr.u8[0];
memcpy(&uip_lladdr.addr, &addr.u8, 8);
rf230_set_pan_addr(IEEE802154_PANID, 0, (uint8_t *)&addr.u8); //ABCD is default - dak
rf230_set_pan_addr(IEEE802154_PANID, 0, (uint8_t *)&addr.u8);
rf230_set_channel(24);
rimeaddr_set_node_addr(&addr);
// printf("MAC address %x:%x:%x:%x:%x:%x:%x:%x\n",addr.u8[0],addr.u8[1],addr.u8[2],addr.u8[3],addr.u8[4],addr.u8[5],addr.u8[6],addr.u8[7]);
// uip_ip6addr(&ipprefix, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
// uip_netif_addr_add(&ipprefix, UIP_DEFAULT_PREFIX_LEN, 0, AUTOCONF);
// uip_nd6_prefix_add(&ipprefix, UIP_DEFAULT_PREFIX_LEN, 0);
// PRINTF("Prefix %x::/%u\n",ipprefix.u16[0],UIP_DEFAULT_PREFIX_LEN);
rimeaddr_set_node_addr(&addr);
// set_rime_addr();
// PRINTF("MAC address %x:%x:%x:%x:%x:%x:%x:%x\n",addr.u8[0],addr.u8[1],addr.u8[2],addr.u8[3],addr.u8[4],addr.u8[5],addr.u8[6],addr.u8[7]);
framer_set(&framer_802154);
/* Setup X-MAC for 802.15.4 */
queuebuf_init();
NETSTACK_RDC.init();
NETSTACK_MAC.init();
NETSTACK_NETWORK.init();
// PRINTF("Driver: %s, Channel: %u\n", sicslowpan_mac->name, rf230_get_channel());
#if UIP_CONF_ROUTER
rime_init(rime_udp_init(NULL));
@ -249,18 +247,18 @@ main(void)
}
#endif
/* Debugging - allow USB CDC to keep up with printfs */
/* Allow USB CDC to keep up with printfs */
#if ANNOUNCE
if (firsttime++==36000){
printf_P(PSTR("\n\n\n********BOOTING CONTIKI*********\n\r"));
#if RF230BB
} else if (firsttime==40000) {
} else if (firsttime==44000) {
printf("MAC address %x:%x:%x:%x:%x:%x:%x:%x\n\r",addr.u8[0],addr.u8[1],addr.u8[2],addr.u8[3],addr.u8[4],addr.u8[5],addr.u8[6],addr.u8[7]);
} else if (firsttime==44000) {
printf("Driver: %s, Channel: %u\n\r", MAC_DRIVER.name, rf230_get_channel());
} else if (firsttime==52000) {
printf("Driver: %s, Channel: %u\n\r", sicslowpan_mac->name, rf230_get_channel());
#endif
} else if (firsttime==48000) {
} else if (firsttime==60000) {
printf_P(PSTR("System online.\n\r"));
}

View File

@ -310,7 +310,8 @@ void mac_ethernetSetup(void)
usbstick_mode.sicslowpan = 1;
usbstick_mode.sendToRf = 1;
usbstick_mode.translate = 1;
usbstick_mode.raw = 1;
//usbstick_mode.raw = 1;
usbstick_mode.raw = 0; //default: don't report raw frames until they are entirely correct
#if !RF230BB
sicslowinput = pinput;