Merge pull request #1665 from g-oikonomou/contrib/cc26xx-bsl

Consolidate .upload for all CC26xx/CC13xx boards and add login make target
This commit is contained in:
Antonio Lignan 2016-06-01 23:37:29 +02:00
commit 6fc4e2535c
3 changed files with 41 additions and 30 deletions

View File

@ -81,6 +81,15 @@ CONTIKI_SOURCEFILES += $(CONTIKI_CPU_SOURCEFILES) $(DEBUG_IO_SOURCEFILES)
TARGET_START_SOURCEFILES += fault-handlers.c $(TI_XXWARE_STARTUP_SRCS)
TARGET_STARTFILES = $(addprefix $(OBJECTDIR)/,$(call oname, $(TARGET_START_SOURCEFILES)))
PYTHON = python
BSL_FLAGS += -e -w -v
ifdef PORT
BSL_FLAGS += -p $(PORT)
endif
BSL = $(CONTIKI)/tools/cc2538-bsl/cc2538-bsl.py
### Don't treat the .elf as intermediate
.PRECIOUS: %.elf %.hex %.bin
@ -125,3 +134,31 @@ STACK_SIZE = 0
@$(SIZE) -A $< | egrep "data|bss" | awk '{s+=$$2} END {s=s+$(STACK_SIZE); f=$(RAM_SIZE)-s; printf "[RAM] used %6d, free %6d\n",s,f;}'
@$(SIZE) -A $< | egrep "text|isr_vector" | awk '{s+=$$2} END {f=$(FLASH_SIZE)-s; printf "[Flash] used %6d, free %6d\n",s,f;}'
ifeq ($(BOARD_SUPPORTS_BSL),1)
%.upload: %.bin
ifeq ($(wildcard $(BSL)), )
@echo "ERROR: Could not find the cc2538-bsl script. Did you run 'git submodule update --init' ?"
else
$(PYTHON) $(BSL) $(BSL_FLAGS) $<
endif
else
%.upload:
@echo "This board cannot be programmed through the ROM bootloader and therefore does not support the .upload target."
endif
# Check if we are running under Windows
ifeq ($(HOST_OS),Windows)
SERIALDUMP ?= $(CONTIKI)/tools/sky/serialdump-windows
else
ifeq ($(HOST_OS),Darwin)
SERIALDUMP ?= $(CONTIKI)/tools/sky/serialdump-macos
else
# Else assume Linux
SERIALDUMP ?= $(CONTIKI)/tools/sky/serialdump-linux
endif
endif
UART_BAUDRATE = 115200
login:
$(SERIALDUMP) -b$(UART_BAUDRATE) $(PORT)

View File

@ -5,18 +5,5 @@ CONTIKI_TARGET_DIRS += launchpad common
BOARD_SOURCEFILES += board.c launchpad-sensors.c leds-arch.c button-sensor.c
BOARD_SOURCEFILES += ext-flash.c board-spi.c
PYTHON = python
BSL_FLAGS += -e -w -v
ifdef PORT
BSL_FLAGS += -p $(PORT)
endif
BSL = $(CONTIKI)/tools/cc2538-bsl/cc2538-bsl.py
%.upload: %.bin
ifeq ($(wildcard $(BSL)), )
@echo "ERROR: Could not find the cc2538-bsl script. Did you run 'git submodule update --init' ?"
else
$(PYTHON) $(BSL) $(BSL_FLAGS) $<
endif
### Signal that we can be programmed with cc2538-bsl
BOARD_SUPPORTS_BSL=1

View File

@ -4,18 +4,5 @@ CONTIKI_TARGET_DIRS += srf06
BOARD_SOURCEFILES += leds-arch.c srf06-sensors.c button-sensor.c board.c
PYTHON = python
BSL_FLAGS += -e -w -v
ifdef PORT
BSL_FLAGS += -p $(PORT)
endif
BSL = $(CONTIKI)/tools/cc2538-bsl/cc2538-bsl.py
%.upload: %.bin
ifeq ($(wildcard $(BSL)), )
@echo "ERROR: Could not find the cc2538-bsl script. Did you run 'git submodule update --init' ?"
else
$(PYTHON) $(BSL) $(BSL_FLAGS) $<
endif
### Signal that we can be programmed with cc2538-bsl
BOARD_SUPPORTS_BSL=1