Merge pull request #966 from g-oikonomou/cc2538-startup-to-cpu-dir

Move cc2538 startup-gcc.c to the CPU dir

cpu/cc2538/Makefile.cc2538

@@ -59,6 +59,13 @@ DEBUG_IO_SOURCEFILES += dbg-printf.c dbg-snprintf.c dbg-sprintf.c strformat.c
 USB_CORE_SOURCEFILES += usb-core.c cdc-acm.c
 USB_ARCH_SOURCEFILES += usb-arch.c usb-serial.c cdc-acm-descriptors.c
 
+ifneq ($(TARGET_START_SOURCEFILES),)
+  CPU_START_SOURCEFILES = TARGET_START_SOURCEFILES
+else
+  CPU_START_SOURCEFILES = startup-gcc.c
+endif
+CPU_STARTFILES = ${addprefix $(OBJECTDIR)/,${call oname, $(CPU_START_SOURCEFILES)}}
+
 CONTIKI_SOURCEFILES += $(CONTIKI_CPU_SOURCEFILES) $(DEBUG_IO_SOURCEFILES)
 CONTIKI_SOURCEFILES += $(USB_CORE_SOURCEFILES) $(USB_ARCH_SOURCEFILES)
 
@@ -75,7 +82,7 @@ $(OBJECTDIR)/ieee-addr.o: ieee-addr.c FORCE | $(OBJECTDIR)
 ### Compilation rules
 CUSTOM_RULE_LINK=1
 
-%.elf: $(TARGET_STARTFILES) %.co $(PROJECT_OBJECTFILES) $(PROJECT_LIBRARIES) contiki-$(TARGET).a $(LDSCRIPT)
+%.elf: $(CPU_STARTFILES) %.co $(PROJECT_OBJECTFILES) $(PROJECT_LIBRARIES) contiki-$(TARGET).a $(LDSCRIPT)
 	$(TRACE_LD)
 	$(Q)$(LD) $(LDFLAGS) ${filter-out $(LDSCRIPT) %.a,$^} ${filter %.a,$^} $(TARGET_LIBFILES) -o $@
 

cpu/cc2538/startup-gcc.c

@@ -30,22 +30,23 @@
  *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 /**
- * \addtogroup cc2538dk
+ * \addtogroup cc2538
  * @{
  *
  * \file
- * Startup code for the cc2538dk platform, to be used when building with gcc
+ * Startup code for the cc2538 chip, to be used when building with gcc
  */
 #include "contiki.h"
 #include "reg.h"
 #include "flash-cca.h"
 #include "sys-ctrl.h"
-#include "uart.h"
 
 #include <stdint.h>
 /*---------------------------------------------------------------------------*/
 extern int main(void);
 /*---------------------------------------------------------------------------*/
+#define WEAK_ALIAS(x) __attribute__ ((weak, alias(#x)))
+/*---------------------------------------------------------------------------*/
 /* System handlers provided here */
 void reset_handler(void);
 void nmi_handler(void);
@@ -62,6 +63,9 @@ void cc2538_rf_rx_tx_isr(void);
 void cc2538_rf_err_isr(void);
 void udma_isr(void);
 void udma_err_isr(void);
+void usb_isr(void) WEAK_ALIAS(default_handler);
+void uart0_isr(void) WEAK_ALIAS(default_handler);
+void uart1_isr(void) WEAK_ALIAS(default_handler);
 
 /* Boot Loader Backdoor selection */
 #if FLASH_CCA_CONF_BOOTLDR_BACKDOOR
@@ -83,22 +87,6 @@ void udma_err_isr(void);
 #else
 #define FLASH_CCA_BOOTLDR_CFG FLASH_CCA_BOOTLDR_CFG_DISABLE
 #endif
-
-/* Link in the USB ISR only if USB is enabled */
-#if USB_SERIAL_CONF_ENABLE
-void usb_isr(void);
-#else
-#define usb_isr default_handler
-#endif
-
-/* Likewise for the UART[01] ISRs */
-#if UART_CONF_ENABLE
-void uart0_isr(void);
-void uart1_isr(void);
-#else /* UART_CONF_ENABLE */
-#define uart0_isr default_handler
-#define uart1_isr default_handler
-#endif /* UART_CONF_ENABLE */
 /*---------------------------------------------------------------------------*/
 /* Allocate stack space */
 static unsigned long stack[512];

platform/cc2538dk/Makefile.cc2538dk

@@ -11,9 +11,6 @@ CONTIKI_TARGET_SOURCEFILES += contiki-main.c
 CONTIKI_TARGET_SOURCEFILES += sensors.c smartrf-sensors.c
 CONTIKI_TARGET_SOURCEFILES += button-sensor.c adc-sensor.c
 
-TARGET_START_SOURCEFILES += startup-gcc.c
-TARGET_STARTFILES = ${addprefix $(OBJECTDIR)/,${call oname, $(TARGET_START_SOURCEFILES)}}
-
 CONTIKI_SOURCEFILES += $(CONTIKI_TARGET_SOURCEFILES)
 
 CLEAN += *.cc2538dk