mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-12-23 01:29:33 +00:00
Merge pull request #1483 from Zolertia/pm10-sensor
Added PM10, VAC and AAC sensor drivers
This commit is contained in:
commit
7d6966b22c
@ -4,10 +4,11 @@ CONTIKI_PROJECT = zoul-demo test-tsl2563 test-sht25 test-pwm test-power-mgmt
|
||||
CONTIKI_PROJECT += test-bmp085-bmp180 test-motion test-rotation-sensor
|
||||
CONTIKI_PROJECT += test-grove-light-sensor test-grove-loudness-sensor
|
||||
CONTIKI_PROJECT += test-weather-meter test-grove-gyro test-lcd
|
||||
CONTIKI_PROJECT += test-pm10-sensor test-vac-sensor test-aac-sensor
|
||||
|
||||
CONTIKI_TARGET_SOURCEFILES += tsl2563.c sht25.c bmpx8x.c motion-sensor.c
|
||||
CONTIKI_TARGET_SOURCEFILES += adc-sensors.c weather-meter.c grove-gyro.c
|
||||
CONTIKI_TARGET_SOURCEFILES += rgb-bl-lcd.c
|
||||
CONTIKI_TARGET_SOURCEFILES += rgb-bl-lcd.c pm10-sensor.c
|
||||
|
||||
all: $(CONTIKI_PROJECT)
|
||||
|
||||
|
102
examples/zolertia/zoul/test-aac-sensor.c
Normal file
102
examples/zolertia/zoul/test-aac-sensor.c
Normal file
@ -0,0 +1,102 @@
|
||||
/*
|
||||
* Copyright (c) 2016, Zolertia - http://www.zolertia.com
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*
|
||||
* \addtogroup zoul-examples
|
||||
* @{
|
||||
* \defgroup zoul-aac-sensor-test Test AAC sensor
|
||||
*
|
||||
* Demonstrates the operation of the current AAC analog sensor
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Example demonstrating the Zoul module on the RE-Mote & AAC sensor 0-5V 50Amps AC
|
||||
*
|
||||
* \author
|
||||
* Javier Sánchez <asanchez@zolertia.com>
|
||||
*/
|
||||
#include "contiki.h"
|
||||
#include "sys/etimer.h"
|
||||
#include "sys/rtimer.h"
|
||||
#include "dev/leds.h"
|
||||
#include "dev/adc-sensors.h"
|
||||
#include <stdio.h>
|
||||
#include <stdint.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define ADC_PIN 2
|
||||
#define LOOP_PERIOD 2
|
||||
#define LOOP_INTERVAL (CLOCK_SECOND * LOOP_PERIOD)
|
||||
#define LEDS_PERIODIC LEDS_GREEN
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static struct etimer et;
|
||||
|
||||
static uint16_t counter;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
PROCESS(test_aac_sensor_process, "Test AAC sensor process");
|
||||
AUTOSTART_PROCESSES(&test_aac_sensor_process);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
PROCESS_THREAD(test_aac_sensor_process, ev, data)
|
||||
{
|
||||
|
||||
PROCESS_BEGIN();
|
||||
|
||||
counter = 0;
|
||||
|
||||
/* Configure the ADC ports */
|
||||
/* Use pin number not mask, for example if using the PA5 pin then use 5 */
|
||||
adc_sensors.configure(ANALOG_AAC_SENSOR, ADC_PIN);
|
||||
|
||||
printf("AAC test application\n");
|
||||
leds_on(LEDS_PERIODIC);
|
||||
etimer_set(&et, LOOP_INTERVAL);
|
||||
|
||||
while(1) {
|
||||
|
||||
PROCESS_YIELD();
|
||||
|
||||
if(ev == PROCESS_EVENT_TIMER) {
|
||||
leds_toggle(LEDS_PERIODIC);
|
||||
|
||||
printf("-----------------------------------------\n"
|
||||
"Counter = 0x%08x\n", counter);
|
||||
|
||||
printf("AC Amps = %d mA\n", adc_sensors.value(ANALOG_AAC_SENSOR));
|
||||
|
||||
etimer_set(&et, LOOP_INTERVAL);
|
||||
counter++;
|
||||
}
|
||||
}
|
||||
PROCESS_END();
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
95
examples/zolertia/zoul/test-pm10-sensor.c
Normal file
95
examples/zolertia/zoul/test-pm10-sensor.c
Normal file
@ -0,0 +1,95 @@
|
||||
/*
|
||||
* Copyright (c) 2016, Zolertia - http://www.zolertia.com
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the Institute nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup zoul-examples
|
||||
* @{
|
||||
* \defgroup zoul-pm10-sensor-test Test PM10 sensor
|
||||
*
|
||||
* Demonstrates the operation of the Sharp PM10 analog sensor
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* GP2Y1010AU0F PM10 sensor example using the ADC sensors wrapper
|
||||
*
|
||||
* \author
|
||||
* Toni Lozano <tlozano@zolertia.com>
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include <stdio.h>
|
||||
#include "cpu.h"
|
||||
#include "contiki.h"
|
||||
#include "dev/leds.h"
|
||||
#include "dev/adc-sensors.h"
|
||||
#include "dev/zoul-sensors.h"
|
||||
#include "lib/sensors.h"
|
||||
#include "dev/sys-ctrl.h"
|
||||
#include "dev/pm10-sensor.h"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define ADC_PIN 2
|
||||
#define SENSOR_READ_INTERVAL (CLOCK_SECOND)
|
||||
/*---------------------------------------------------------------------------*/
|
||||
PROCESS(test_pm10_sensor_process, "Test PM10 sensor process");
|
||||
AUTOSTART_PROCESSES(&test_pm10_sensor_process);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static struct etimer et;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
PROCESS_THREAD(test_pm10_sensor_process, ev, data)
|
||||
{
|
||||
PROCESS_BEGIN();
|
||||
|
||||
static uint16_t pm10_value;
|
||||
|
||||
/* Use pin number not mask, for example if using the PA5 pin then use 2 */
|
||||
pm10.configure(SENSORS_ACTIVE, ADC_PIN);
|
||||
|
||||
/* And periodically poll the sensor */
|
||||
|
||||
while(1) {
|
||||
etimer_set(&et, SENSOR_READ_INTERVAL);
|
||||
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
|
||||
|
||||
leds_toggle(LEDS_GREEN);
|
||||
pm10_value = pm10.value(1);
|
||||
|
||||
if(pm10_value != ADC_WRAPPER_ERROR) {
|
||||
printf("PM10 value = %u ppm\n", pm10_value);
|
||||
} else {
|
||||
printf("Error, enable the DEBUG flag in adc-wrapper.c for info\n");
|
||||
PROCESS_EXIT();
|
||||
}
|
||||
}
|
||||
PROCESS_END();
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
104
examples/zolertia/zoul/test-vac-sensor.c
Normal file
104
examples/zolertia/zoul/test-vac-sensor.c
Normal file
@ -0,0 +1,104 @@
|
||||
/*
|
||||
* Copyright (c) 2016, Zolertia - http://www.zolertia.com
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*
|
||||
* \addtogroup zoul-examples
|
||||
* @{
|
||||
* \defgroup zoul-vac-sensor-test Test VAC sensor
|
||||
*
|
||||
* Demonstrates the operation of the voltage VAC analog sensor
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Example demonstrating the Zoul module on the RE-Mote & VAC sensor 0-5V 250V AC
|
||||
*
|
||||
* \author
|
||||
* Javier Sánchez <asanchez@zolertia.com>
|
||||
*/
|
||||
#include "contiki.h"
|
||||
#include "sys/etimer.h"
|
||||
#include "sys/rtimer.h"
|
||||
#include "dev/leds.h"
|
||||
#include "dev/adc-sensors.h"
|
||||
#include <stdio.h>
|
||||
#include <stdint.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define ADC_PIN 2
|
||||
#define LOOP_PERIOD 2
|
||||
#define LOOP_INTERVAL (CLOCK_SECOND * LOOP_PERIOD)
|
||||
#define LEDS_PERIODIC LEDS_GREEN
|
||||
#define BUTTON_PRESS_EVENT_INTERVAL (CLOCK_SECOND)
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static struct etimer et;
|
||||
|
||||
static uint16_t counter;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
PROCESS(test_vac_sensor_process, "test VAC sensor process");
|
||||
AUTOSTART_PROCESSES(&test_vac_sensor_process);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
PROCESS_THREAD(test_vac_sensor_process, ev, data)
|
||||
{
|
||||
|
||||
PROCESS_BEGIN();
|
||||
|
||||
counter = 0;
|
||||
|
||||
/* Configure the ADC ports */
|
||||
/* Use pin number not mask, for example if using the PA5 pin then use 5 */
|
||||
adc_sensors.configure(ANALOG_VAC_SENSOR, ADC_PIN);
|
||||
|
||||
printf("VAC test application\n");
|
||||
leds_on(LEDS_PERIODIC);
|
||||
etimer_set(&et, LOOP_INTERVAL);
|
||||
|
||||
while(1) {
|
||||
|
||||
PROCESS_YIELD();
|
||||
|
||||
if(ev == PROCESS_EVENT_TIMER) {
|
||||
leds_toggle(LEDS_PERIODIC);
|
||||
|
||||
printf("-----------------------------------------\n"
|
||||
"Counter = 0x%08x\n", counter);
|
||||
|
||||
/*AC voltage value, with applied corresponding sensor algorithm*/
|
||||
printf("AC voltage = %d V\n", adc_sensors.value(ANALOG_VAC_SENSOR));
|
||||
|
||||
etimer_set(&et, LOOP_INTERVAL);
|
||||
counter++;
|
||||
}
|
||||
}
|
||||
PROCESS_END();
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
@ -45,7 +45,6 @@
|
||||
#include "adc-sensors.h"
|
||||
#include "adc-zoul.h"
|
||||
#include "zoul-sensors.h"
|
||||
|
||||
#include <stdio.h>
|
||||
#include <stdint.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
@ -108,6 +107,21 @@ convert_to_value(uint8_t index)
|
||||
value /= 100000;
|
||||
return (uint16_t)value;
|
||||
|
||||
/* VDD+5 sensors */
|
||||
case ANALOG_VAC_SENSOR:
|
||||
/* Linear sensor from 0 to 5 V; 0.0088 resolution*/
|
||||
value *= 88;
|
||||
value /= 10000;
|
||||
return (uint16_t)value;
|
||||
|
||||
case ANALOG_AAC_SENSOR:
|
||||
/* Linear sensor from 0 to 5 V;*/
|
||||
return (uint16_t)value;
|
||||
|
||||
case ANALOG_PM10_SENSOR:
|
||||
/* PM10 sensor from 0 to 3.9 V;*/
|
||||
return (uint16_t)value;
|
||||
|
||||
default:
|
||||
return ADC_WRAPPER_ERROR;
|
||||
}
|
||||
@ -154,7 +168,8 @@ configure(int type, int value)
|
||||
uint8_t pin_mask = GPIO_PIN_MASK(value);
|
||||
|
||||
if((type != ANALOG_GROVE_LIGHT) && (type != ANALOG_PHIDGET_ROTATION_1109) &&
|
||||
(type != ANALOG_GROVE_LOUDNESS)) {
|
||||
(type != ANALOG_GROVE_LOUDNESS) && (type != ANALOG_PM10_SENSOR) &&
|
||||
(type != ANALOG_VAC_SENSOR) && (type != ANALOG_AAC_SENSOR) ) {
|
||||
PRINTF("ADC sensors: sensor not supported, check adc_wrapper.h header\n");
|
||||
return ADC_WRAPPER_ERROR;
|
||||
}
|
||||
@ -187,6 +202,19 @@ configure(int type, int value)
|
||||
sensors.sensor[sensors.sensors_num].vdd3 = 1;
|
||||
break;
|
||||
|
||||
/*V+5 sensors*/
|
||||
case ANALOG_VAC_SENSOR:
|
||||
case ANALOG_AAC_SENSOR:
|
||||
case ANALOG_PM10_SENSOR:
|
||||
if(adc_zoul.configure(SENSORS_HW_INIT, pin_mask) == ZOUL_SENSORS_ERROR) {
|
||||
return ADC_WRAPPER_ERROR;
|
||||
}
|
||||
sensors.sensor[sensors.sensors_num].type = type;
|
||||
sensors.sensor[sensors.sensors_num].pin_mask = pin_mask;
|
||||
sensors.sensor[sensors.sensors_num].vdd3 = 0;
|
||||
break;
|
||||
|
||||
|
||||
default:
|
||||
return ADC_WRAPPER_ERROR;
|
||||
}
|
||||
|
@ -71,6 +71,9 @@
|
||||
#define ANALOG_GROVE_LIGHT 0x01
|
||||
#define ANALOG_PHIDGET_ROTATION_1109 0x02
|
||||
#define ANALOG_GROVE_LOUDNESS 0x03
|
||||
#define ANALOG_VAC_SENSOR 0x04
|
||||
#define ANALOG_AAC_SENSOR 0x05
|
||||
#define ANALOG_PM10_SENSOR 0x06
|
||||
/* -------------------------------------------------------------------------- */
|
||||
#define ADC_SENSORS "ADC sensors API"
|
||||
/* -------------------------------------------------------------------------- */
|
||||
|
123
platform/zoul/dev/pm10-sensor.c
Normal file
123
platform/zoul/dev/pm10-sensor.c
Normal file
@ -0,0 +1,123 @@
|
||||
/*
|
||||
* Copyright (c) 2016, Zolertia <http://www.zolertia.com>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the Institute nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* This file is part of the Contiki operating system.
|
||||
*
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup zoul-pm10-sensor
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* GP2Y1010AU0F PM10 sensor example using the ADC sensors wrapper
|
||||
* \author
|
||||
* Toni Lozano <tlozano@zolertia.com>
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include <stdio.h>
|
||||
#include "contiki.h"
|
||||
#include "adc-sensors.h"
|
||||
#include "adc-zoul.h"
|
||||
#include "zoul-sensors.h"
|
||||
#include "dev/pm10-sensor.h"
|
||||
#include "dev/sys-ctrl.h"
|
||||
#include "lib/sensors.h"
|
||||
#include "dev/gpio.h"
|
||||
#include "dev/ioc.h"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define PM10_SENSOR_PORT_BASE GPIO_PORT_TO_BASE(PM10_SENSOR_CTRL_PORT)
|
||||
#define PM10_SENSOR_PIN_MASK GPIO_PIN_MASK(PM10_SENSOR_CTRL_PIN)
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static int pm10_channel;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static int
|
||||
configure(int type, int value)
|
||||
{
|
||||
if(type != SENSORS_ACTIVE) {
|
||||
return PM10_ERROR;
|
||||
}
|
||||
|
||||
if(value) {
|
||||
/* Set as output, used as pulse-driven wave */
|
||||
GPIO_SOFTWARE_CONTROL(PM10_SENSOR_PORT_BASE, PM10_SENSOR_PIN_MASK);
|
||||
ioc_set_over(PM10_SENSOR_CTRL_PORT, PM10_SENSOR_CTRL_PIN, IOC_OVERRIDE_DIS);
|
||||
GPIO_SET_OUTPUT(PM10_SENSOR_PORT_BASE, PM10_SENSOR_PIN_MASK);
|
||||
GPIO_CLR_PIN(PM10_SENSOR_PORT_BASE, PM10_SENSOR_PIN_MASK);
|
||||
|
||||
pm10_channel = (1 << value);
|
||||
return adc_zoul.configure(SENSORS_HW_INIT, pm10_channel);
|
||||
}
|
||||
|
||||
pm10_channel = 0;
|
||||
return PM10_SUCCESS;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static int
|
||||
value(int type)
|
||||
{
|
||||
uint32_t val;
|
||||
|
||||
if(!pm10_channel) {
|
||||
return PM10_ERROR;
|
||||
}
|
||||
|
||||
/* Set Pulse Wave pin before measure */
|
||||
GPIO_SET_PIN(PM10_SENSOR_PORT_BASE, PM10_SENSOR_PIN_MASK);
|
||||
/* Pulse wave delay */
|
||||
clock_delay_usec(PM10_SENSOR_PULSE_DELAY);
|
||||
/* Data acquisition */
|
||||
val = (uint32_t)adc_zoul.value(pm10_channel);
|
||||
|
||||
if(val == ZOUL_SENSORS_ERROR) {
|
||||
printf("PM10 sensor: failed retrieving data\n");
|
||||
return PM10_ERROR;
|
||||
}
|
||||
|
||||
/* Default voltage divisor relation is 5/3 aprox, change at adc_wrapper.h,
|
||||
* calculations below assume a decimation rate of 512 (12 bits ENOB) and
|
||||
* AVVD5 voltage reference of 3.3V
|
||||
*/
|
||||
val *= PM10_EXTERNAL_VREF;
|
||||
val /= PM10_EXTERNAL_VREF_CROSSVAL;
|
||||
|
||||
/* Applied constant conversion from UAir project
|
||||
* to obtain value in ppm (value in mV * 0.28)
|
||||
*/
|
||||
val *= 28;
|
||||
val /= 1000;
|
||||
|
||||
/* Clear pulse wave pin */
|
||||
GPIO_CLR_PIN(PM10_SENSOR_PORT_BASE, PM10_SENSOR_PIN_MASK);
|
||||
|
||||
return (uint16_t)val;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
SENSORS_SENSOR(pm10, PM10_SENSOR, value, configure, NULL);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @} */
|
74
platform/zoul/dev/pm10-sensor.h
Normal file
74
platform/zoul/dev/pm10-sensor.h
Normal file
@ -0,0 +1,74 @@
|
||||
/*
|
||||
* Copyright (c) 2016, Zolertia <http://www.zolertia.com>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the Institute nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* This file is part of the Contiki operating system.
|
||||
*
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup zoul-sensors
|
||||
* @{
|
||||
*
|
||||
* \defgroup zoul-pm10-sensor Analog PM10 sensor
|
||||
* @{
|
||||
* \file
|
||||
* GP2Y1010AU0F PM10 sensor driver
|
||||
* \author
|
||||
* Toni Lozano <tlozano@zolertia.com>
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "lib/sensors.h"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#ifndef PM10_SENSOR_H_
|
||||
#define PM10_SENSOR_H_
|
||||
/* -------------------------------------------------------------------------- */
|
||||
#define PM10_ERROR (-1)
|
||||
#define PM10_SUCCESS 0
|
||||
#define PM10_SENSOR "PM10 Sensor"
|
||||
#define PM10_SENSOR_PULSE_DELAY 280
|
||||
#define PM10_EXTERNAL_VREF 5000
|
||||
#define PM10_EXTERNAL_VREF_CROSSVAL 3300
|
||||
/* -------------------------------------------------------------------------- */
|
||||
#ifdef PM10_SENSOR_CONF_CTRL_PIN
|
||||
#define PM10_SENSOR_CTRL_PIN PM10_SENSOR_CONF_CTRL_PIN
|
||||
#else
|
||||
#define PM10_SENSOR_CTRL_PIN 7
|
||||
#endif
|
||||
#ifdef PM10_SENSOR_CONF_CTRL_PORT
|
||||
#define PM10_SENSOR_CTRL_PORT PM10_SENSOR_CONF_CTRL_PORT
|
||||
#else
|
||||
#define PM10_SENSOR_CTRL_PORT GPIO_A_NUM
|
||||
#endif
|
||||
/* -------------------------------------------------------------------------- */
|
||||
extern const struct sensors_sensor pm10;
|
||||
/* -------------------------------------------------------------------------- */
|
||||
#endif /* ifndef PM10_SENSOR_H_ */
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
Loading…
Reference in New Issue
Block a user