Updates of REAME files (main and submodule).

This commit is contained in:
Marco Grella 2015-09-11 15:56:12 +02:00
parent 87970a88a4
commit 875bfd0a1a
2 changed files with 11 additions and 9 deletions

View File

@ -7,7 +7,7 @@ Port Feature
============
The port supports the following boards from ST:
- NUCLEO-L152RE board, based on the STM32L152RET6 ultra-low power microcontroller
- NUCLEO-L152RE board, based on the STM32L152RET6 ultra-low power microcontroller
- X-NUCLEO-IDS01A4 based on sub-1GHz SPSGRF-868 SPIRIT1 module (operating at 868 MHz)
- X-NUCLEO-IDS01A5 based on sub-1GHz SPSGRF-915 SPIRIT1 module (operating at 915 MHz)
- X-NUCLEO-IKS01A1 featuring motion MEMS and environmental sensors (optional)
@ -63,14 +63,15 @@ Software Requirements
The following software are needed:
* ST port of Contiki for STM32 Nucleo and expansion boards.
>The port is automatically installed when both the Contiki and the submodule repository are cloned: the former hosts the Contiki distribution and the ST platform interface, the latter hosts the actual library.
The following commands are needed to download the full porting:
>The port is automatically installed when both the Contiki and the submodule repository are cloned: the former hosts the Contiki distribution and the ST platform interface, the latter hosts the actual library. The following commands are needed to download the full porting:
git clone https://github.com/STclab/contiki.git
cd contiki/
git checkout stm32nucleo-spirit1
git submodule init
git submodule update
git clone https://github.com/STclab/contiki.git
cd contiki/
git checkout stm32nucleo-spirit1
git submodule init
git submodule update
Note: the first and third steps are required only if using the STclab GitHub repository, they won't be needed any more once the Pull Request is accepted.
@ -151,3 +152,4 @@ automatically created when plugging the STM32 Nucleo board to the PC.

@ -1 +1 @@
Subproject commit 25a065a28e4b1e05adb92df834939271fe6a700c
Subproject commit 6ff4221d03963844364616e6499e9401c0321c28