Added the TIME driver for RL78G14.

Communication.c

@@ -66,25 +66,25 @@ __interrupt static void IICA0_Interrupt(void)
 /***************************************************************************//**
  * @brief Initializes the SPI communication peripheral.
  *
- * @param lsbFirst - Transfer format (0 or 1).
+ * @param lsbFirst  - Transfer format (0 or 1).
- *                   Example: 0x0 - MSB first.
+ *                    Example: 0x0 - MSB first.
- *                            0x1 - LSB first.
+ *                             0x1 - LSB first.
  * @param clockFreq - SPI clock frequency (Hz).
  *                    Example: 1000 - SPI clock frequency is 1 kHz.
- * @param clockPol - SPI clock polarity (0 or 1).
+ * @param clockPol  - SPI clock polarity (0 or 1).
- *                   Example: 0x0 - Idle state for clock is a low level; active
+ *                    Example: 0x0 - Idle state for clock is a low level; active
- *                                  state is a high level;
+ *                                   state is a high level;
- *                            0x1 - Idle state for clock is a high level; active
+ *                             0x1 - Idle state for clock is a high level; active
- *                                  state is a low level.
+ *                                   state is a low level.
- * @param clockEdg - SPI clock edge (0 or 1).
+ * @param clockEdg  - SPI clock edge (0 or 1).
- *                   Example: 0x0 - Serial output data changes on transition
+ *                    Example: 0x0 - Serial output data changes on transition
- *                                  from idle clock state to active clock state;
+ *                                   from idle clock state to active clock state;
- *                            0x1 - Serial output data changes on transition
+ *                             0x1 - Serial output data changes on transition
- *                                  from active clock state to idle clock state.
+ *                                   from active clock state to idle clock state.
  *
- * @return status - Result of the initialization procedure.
+ * @return status   - Result of the initialization procedure.
- *                  Example: 1 - if initialization was successful;
+ *                    Example:  0 - if initialization was successful;
- *                           0 - if initialization was unsuccessful.
+ *                             -1 - if initialization was unsuccessful.
 *******************************************************************************/
 char SPI_Init(char lsbFirst,
               long clockFreq,
@@ -93,6 +93,7 @@ char SPI_Init(char lsbFirst,
 {
     long mckFreq  = 32000000;
     char sdrValue = 0;
+    char delay    = 0;
 
     /* Configure the CS pins. */
     PMOD1_CS_OUT;
@@ -119,43 +120,49 @@ char SPI_Init(char lsbFirst,
     SMR11 = 0x0020;
 
     clockPol = 1 - clockPol;
-    SCR11 = (clockEdg << 13) |
+    SCR11    = (clockEdg << 13) |
-            (clockPol << 12) |
+               (clockPol << 12) |
-            0xC000 |           // Operation mode: Transmission/reception.
+                0xC000 |           // Operation mode: Transmission/reception.
-            0x0007;            // 8-bit data length.
+                0x0007;            // 8-bit data length.
 
     /* clockFreq =  mckFreq / (sdrValue * 2 + 2) */
     sdrValue = mckFreq / (2 * clockFreq) - 1;
-    SDR11 = sdrValue << 9;
+    SDR11    = sdrValue << 9;
 
     /* Set the clock and data initial level. */
     clockPol = 1 - clockPol;
-    SO1 &= ~0x0202;
+    SO1     &= ~0x0202;
-    SO1 |= (clockPol << 9) |
+    SO1     |= (clockPol << 9) |
            (clockPol << 1);
 
     /* Enable output for serial communication operation. */
     SOE1 |= 0x0002;
 
-    /*  Configure SCLK and MOSI pins as output. */
-    PM7 &= ~0x05;
-    P7 |= 0x05;
-
     /*  Configure the MISO pin as input. */
-    PM7 |= 0x02;
+    PM7  |= 0x02;
-
+    
+    /*  Configure SCLK and MOSI pins as output. */
+    P7  |= 0x05;
+    PM7 &= ~0x05;
+    
+    /* Wait for the changes to take place. */
+    for(delay = 0; delay < 50; delay++)
+    {
+        NOP;
+    }
+    
     /* Set the SEmn bit to 1 and enter the communication wait status */
     SS1 |= 0x0002;
-
+    
-    return 1;
+    return 0;
 }
 
 /***************************************************************************//**
  * @brief Writes data to SPI.
  *
  * @param slaveDeviceId - The ID of the selected slave device.
- * @param data - Data represents the write buffer.
+ * @param data          - Data represents the write buffer.
- * @param bytesNumber - Number of bytes to write.
+ * @param bytesNumber   - Number of bytes to write.
  *
  * @return Number of written bytes.
 *******************************************************************************/
@@ -163,8 +170,10 @@ char SPI_Write(char slaveDeviceId,
                unsigned char* data,
                char bytesNumber)
 {
-    char          byte = 0;
+    char           byte        = 0;
-    unsigned char read = 0;
+    unsigned char  read        = 0;
+    unsigned short originalSCR = 0;
+    unsigned short originalSO1 = 0;
 
     if(slaveDeviceId == 1)
     {
@@ -176,6 +185,12 @@ char SPI_Write(char slaveDeviceId,
     }
     if(slaveDeviceId == 3)
     {
+        ST1        |= 0x0002;
+        originalSO1 = SO1;
+        originalSCR = SCR11;
+        SO1        &= ~0x0202;
+        SCR11      &= ~0x3000;
+        SS1        |= 0x0002;
         ST7579_CS_LOW;
     }
     for(byte = 0; byte < bytesNumber; byte++)
@@ -196,6 +211,10 @@ char SPI_Write(char slaveDeviceId,
     if(slaveDeviceId == 3)
     {
         ST7579_CS_HIGH;
+        ST1  |= 0x0002;
+        SO1   = originalSO1;
+        SCR11 = originalSCR;
+        SS1  |= 0x0002;
     }
 
     return bytesNumber;
@@ -205,9 +224,9 @@ char SPI_Write(char slaveDeviceId,
  * @brief Reads data from SPI.
  *
  * @param slaveDeviceId - The ID of the selected slave device.
- * @param data - Data represents the write buffer as an input parameter and the
+ * @param data          - Data represents the write buffer as an input parameter 
- *               read buffer as an output parameter.
+ *                        and the read buffer as an output parameter.
- * @param bytesNumber - Number of bytes to read.
+ * @param bytesNumber   - Number of bytes to read.
  *
  * @return Number of read bytes.
 *******************************************************************************/
@@ -215,7 +234,9 @@ char SPI_Read(char slaveDeviceId,
               unsigned char* data,
               char bytesNumber)
 {
-    char byte = 0;
+    char           byte        = 0;
+    unsigned short originalSCR = 0;
+    unsigned short originalSO1 = 0;
 
     if(slaveDeviceId == 1)
     {
@@ -227,6 +248,12 @@ char SPI_Read(char slaveDeviceId,
     }
     if(slaveDeviceId == 3)
     {
+        ST1        |= 0x0002;
+        originalSO1 = SO1;
+        originalSCR = SCR11;
+        SO1        &= ~0x0202;
+        SCR11      &= ~0x3000;
+        SS1        |= 0x0002;
         ST7579_CS_LOW;
     }
     for(byte = 0; byte < bytesNumber; byte++)
@@ -247,6 +274,10 @@ char SPI_Read(char slaveDeviceId,
     if(slaveDeviceId == 3)
     {
         ST7579_CS_HIGH;
+        ST1  |= 0x0002;
+        SO1   = originalSO1;
+        SCR11 = originalSCR;
+        SS1  |= 0x0002;
     }
 
     return bytesNumber;
@@ -257,9 +288,9 @@ char SPI_Read(char slaveDeviceId,
  *
  * @param clockFreq - I2C clock frequency (Hz).
  *                    Example: 100000 - SPI clock frequency is 100 kHz.
- * @return status - Result of the initialization procedure.
+ * @return status   - Result of the initialization procedure.
- *                  Example: 1 - if initialization was successful;
+ *                    Example:  0 - if initialization was successful;
- *                           0 - if initialization was unsuccessful.
+ *                             -1 - if initialization was unsuccessful.
 *******************************************************************************/
 char I2C_Init(long clockFreq)
 {
@@ -279,13 +310,13 @@ char I2C_Init(long clockFreq)
     /* Set transfer rate. */
     wlValue = (unsigned char)((0.5 * fckFreq) / clockFreq);
     whValue = (unsigned char)(wlValue - (fckFreq / (10 * clockFreq)));
-    IICWL0 = wlValue;
+    IICWL0  = wlValue;
-    IICWH0 = whValue;
+    IICWH0  = whValue;
 
-    STCEN0 = 1; // After operation is enabled, enable generation of a start
+    STCEN0  = 1; // After operation is enabled, enable generation of a start
-                // condition without detecting a stop condition.
+                 // condition without detecting a stop condition.
-    WTIM0 = 1;  // Interrupt request is generated at the ninth clock’s
+    WTIM0  = 1;  // Interrupt request is generated at the ninth clock’s
-                // falling edge.
+                 // falling edge.
 
     /* Enable I2C operation. */
     IICE0 = 1;
@@ -294,21 +325,21 @@ char I2C_Init(long clockFreq)
     P6 &= ~0x03;
     PM6 &= ~0x03;
 
-    return 1;
+    return 0;
 }
 
 /***************************************************************************//**
  * @brief Writes data to a slave device.
  *
  * @param slaveAddress - Adress of the slave device.
- * @param dataBuffer - Pointer to a buffer storing the transmission data.
+ * @param dataBuffer   - Pointer to a buffer storing the transmission data.
- * @param bytesNumber - Number of bytes to write.
+ * @param bytesNumber  - Number of bytes to write.
- * @param stopBit - Stop condition control.
+ * @param stopBit      - Stop condition control.
- *                  Example: 0 - A stop condition will not be sent;
+ *                       Example: 0 - A stop condition will not be sent;
- *                           1 - A stop condition will be sent.
+ *                                1 - A stop condition will be sent.
  *
- * @return status - Number of read bytes or 0xFF if the slave address was not
+ * @return status      - Number of read bytes or 0xFF if the slave address was 
- *                  acknowledged by the device.
+ *                       not acknowledged by the device.
 *******************************************************************************/
 char I2C_Write(char slaveAddress,
                unsigned char* dataBuffer,
@@ -318,13 +349,13 @@ char I2C_Write(char slaveAddress,
     char byte   = 0;
     char status = 0;
 
-    IICAMK0 = 1; // Interrupt servicing disabled.
+    IICAMK0 = 1;    // Interrupt servicing disabled.
-    STT0 = 1;    // Generate a start condition.
+    STT0    = 1;    // Generate a start condition.
-    IICAMK0 = 0; // Interrupt servicing enabled.
+    IICAMK0 = 0;    // Interrupt servicing enabled.
 
     /* Send the first byte. */
     IICA0_Flag = 0;
-    IICA0 = (slaveAddress << 1);
+    IICA0      = (slaveAddress << 1);
     while(IICA0_Flag == 0);
 
     if(ACKD0)   // Acknowledge was detected.
@@ -332,7 +363,7 @@ char I2C_Write(char slaveAddress,
         for(byte = 0; byte < bytesNumber; byte++)
         {
             IICA0_Flag = 0;
-            IICA0 = *dataBuffer;
+            IICA0      = *dataBuffer;
             while(IICA0_Flag == 0);
             dataBuffer++;
         }
@@ -355,14 +386,14 @@ char I2C_Write(char slaveAddress,
  * @brief Reads data from a slave device.
  *
  * @param slaveAddress - Adress of the slave device.
- * @param dataBuffer - Pointer to a buffer that will store the received data.
+ * @param dataBuffer   - Pointer to a buffer that will store the received data.
- * @param bytesNumber - Number of bytes to read.
+ * @param bytesNumber  - Number of bytes to read.
- * @param stopBit - Stop condition control.
+ * @param stopBit      - Stop condition control.
- *                  Example: 0 - A stop condition will not be sent;
+ *                       Example: 0 - A stop condition will not be sent;
- *                           1 - A stop condition will be sent.
+ *                                1 - A stop condition will be sent.
  *
- * @return status - Number of read bytes or 0xFF if the slave address was not
+ * @return status      - Number of read bytes or 0xFF if the slave address was 
- *                  acknowledged by the device.
+ *                       not acknowledged by the device.
 *******************************************************************************/
 char I2C_Read(char slaveAddress,
               unsigned char* dataBuffer,
@@ -373,12 +404,12 @@ char I2C_Read(char slaveAddress,
     char status = 0;
 
     IICAMK0 = 1;	// Interrupt servicing disabled.
-    STT0 = 1;		// Generate a start condition.
+    STT0    = 1;	// Generate a start condition.
     IICAMK0 = 0;        // Interrupt servicing enabled.
 
     /* Send the first byte. */
     IICA0_Flag = 0;
-    IICA0 = (slaveAddress << 1) + 1;
+    IICA0      = (slaveAddress << 1) + 1;
     while(IICA0_Flag == 0);
 
     if(ACKD0)           // Acknowledge was detected.
@@ -388,24 +419,24 @@ char I2C_Read(char slaveAddress,
         {
             if(byte == (bytesNumber - 1))
             {
-                ACKE0 = 0U;     // Disable acknowledgment.
+                ACKE0 = 0U;           // Disable acknowledgment.
             }
-            WREL0 = 1U;         // Cancel wait.
+            WREL0       = 1U;         // Cancel wait.
-            IICA0_Flag = 0;
+            IICA0_Flag  = 0;
             while(IICA0_Flag == 0);
             *dataBuffer = IICA0;
             dataBuffer++;
         }
         status = bytesNumber;
     }
-    else                // Acknowledge was not detected.
+    else                     // Acknowledge was not detected.
     {
-            status = 0xFF;
+        status = 0xFF;
     }
     if(stopBit)
     {
-            SPT0 = 1;           // Generate a stop condition.
+        SPT0 = 1;           // Generate a stop condition.
-            while(IICBSY0);     // Wait until the I2C bus status flag is cleared.
+        while(IICBSY0);     // Wait until the I2C bus status flag is cleared.
     }
 
     return status;

Communication.h

@@ -50,9 +50,26 @@
 /******************************************************************************/
 /*************************** Macros Definitions *******************************/
 /******************************************************************************/
-#define CS_PIN_LOW  PMOD1_CS_LOW
+#define SPI_CS_PIN_OUT  PMOD1_CS_OUT
-#define CS_PIN_HIGH PMOD1_CS_HIGH
+#define SPI_CS_LOW      PMOD1_CS_LOW
-#define MISO_PIN    PMOD1_MISO
+#define SPI_CS_HIGH     PMOD1_CS_HIGH
+#define SPI_MISO        PMOD1_MISO
+
+#define GPIO1_PIN_OUT   PMOD1_GPIO1_PIN_OUT
+#define GPIO1_LOW       PMOD1_GPIO1_LOW
+#define GPIO1_HIGH      PMOD1_GPIO1_HIGH
+
+#define GPIO2_PIN_OUT   PMOD1_GPIO2_PIN_OUT
+#define GPIO2_LOW       PMOD1_GPIO2_LOW
+#define GPIO2_HIGH      PMOD1_GPIO2_HIGH
+
+#define GPIO3_PIN_OUT   PMOD1_GPIO3_PIN_OUT
+#define GPIO3_LOW       PMOD1_GPIO3_LOW
+#define GPIO3_HIGH      PMOD1_GPIO3_HIGH
+
+#define GPIO4_PIN_OUT   PMOD1_GPIO4_PIN_OUT
+#define GPIO4_LOW       PMOD1_GPIO4_LOW
+#define GPIO4_HIGH      PMOD1_GPIO4_HIGH
 
 /******************************************************************************/
 /************************ Functions Declarations ******************************/

RDKRL78G14.c

@@ -37,7 +37,7 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
 ********************************************************************************
- *   SVN Revision: 831
+ *   SVN Revision: $WCREV$
 *******************************************************************************/
 
 /******************************************************************************/
@@ -71,7 +71,7 @@ void RDKRL78G14_Reset(void)
  *
  * @return status - Result of the initialization procedure.
  *                  Example: 0 - if initialization was successful;
- *                           -1 - if initialization was unsuccessful.
+ *                          -1 - if initialization was unsuccessful.
 *******************************************************************************/
 char RDKRL78G14_Init(void)
 {

RDKRL78G14.h

@@ -37,7 +37,7 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
 ********************************************************************************
- *   SVN Revision: 831
+ *   SVN Revision: $WCREV$
 *******************************************************************************/
 
 #ifndef __RDKRL78G14_H__
@@ -88,7 +88,31 @@
 
 /* PMOD1 MISO Pin */
 #define PMOD1_MISO_PIN	(1 << 1)
-#define PMOD1_MISO		((P7 & PMOD1_MISO_PIN) >> 1)
+#define PMOD1_MISO      ((P7 & PMOD1_MISO_PIN) >> 1)
+
+/* PMOD1 GPIO1 Pin - P47 */
+#define PMOD1_GPIO1_PIN       (1 << 7)
+#define PMOD1_GPIO1_PIN_OUT   PM4 &= ~PMOD1_GPIO1_PIN;
+#define PMOD1_GPIO1_LOW       P4  &= ~PMOD1_GPIO1_PIN;
+#define PMOD1_GPIO1_HIGH      P4  |=  PMOD1_GPIO1_PIN;
+
+/* PMOD1 GPIO2 Pin - P46 */
+#define PMOD1_GPIO2_PIN       (1 << 6)
+#define PMOD1_GPIO2_PIN_OUT   PM4 &= ~PMOD1_GPIO2_PIN;
+#define PMOD1_GPIO2_LOW       P4  &= ~PMOD1_GPIO2_PIN;
+#define PMOD1_GPIO2_HIGH      P4  |=  PMOD1_GPIO2_PIN;
+
+/* PMOD1 GPIO3 Pin - P110 */
+#define PMOD1_GPIO3_PIN       (1 << 0)
+#define PMOD1_GPIO3_PIN_OUT   PM11 &= ~PMOD1_GPIO3_PIN;
+#define PMOD1_GPIO3_LOW       P11  &= ~PMOD1_GPIO3_PIN;
+#define PMOD1_GPIO3_HIGH      P11  |=  PMOD1_GPIO3_PIN;
+
+/* PMOD1 GPIO4 Pin - P111 */
+#define PMOD1_GPIO4_PIN       (1 << 1)
+#define PMOD1_GPIO4_PIN_OUT   PM11 &= ~PMOD1_GPIO4_PIN;
+#define PMOD1_GPIO4_LOW       P11  &= ~PMOD1_GPIO4_PIN;
+#define PMOD1_GPIO4_HIGH      P11  |=  PMOD1_GPIO4_PIN;
 
 /* PMOD2 CS Pin - P82 */
 #define PMOD2_CS_PIN	(1 << 2)
@@ -96,24 +120,6 @@
 #define PMOD2_CS_LOW	P8 &= ~PMOD2_CS_PIN
 #define PMOD2_CS_HIGH	P8 |=  PMOD2_CS_PIN
 
-/* GPIO1 Pin - P46 */
-#define GPIO1_PIN              (1 << 6)
-#define GPIO1_PIN_OUT          PM4 &= ~GPIO1_PIN;
-#define GPIO1_PIN_LOW          P4  &= ~GPIO1_PIN;
-#define GPIO1_PIN_HIGH         P4  |=  GPIO1_PIN;
-
-/* GPIO2 Pin - P110 */
-#define GPIO2_PIN              (1 << 0)
-#define GPIO2_PIN_OUT          PM11 &= ~GPIO2_PIN;
-#define GPIO2_PIN_LOW          P11  &= ~GPIO2_PIN;
-#define GPIO2_PIN_HIGH         P11  |=  GPIO2_PIN;
-
-/* GPIO3 Pin - P111 */
-#define GPIO3_PIN              (1 << 1)
-#define GPIO3_PIN_OUT          PM11 &= ~GPIO3_PIN;
-#define GPIO3_PIN_LOW          P11  &= ~GPIO3_PIN;
-#define GPIO3_PIN_HIGH         P11  |=  GPIO3_PIN;
-
 /******************************************************************************/
 /************************ Functions Declarations ******************************/
 /******************************************************************************/

ST7579.c

@@ -215,19 +215,19 @@ void ST7579_Clear(void)
  * @brief Initializes the ST7579 controller.
  *
  * @return status - Result of the initialization procedure.
- *                  Example: 1 - if initialization was successful;
+ *                  Example: 0 - if initialization was successful;
- *                           0 - if initialization was unsuccessful.
+ *                          -1 - if initialization was unsuccessful.
 *******************************************************************************/
-unsigned char ST7579_Init(void)
+char ST7579_Init(void)
 {
-    unsigned char  status = 0;
+    char           status = -1;
     unsigned short delay  = 0;
 
     status = SPI_Init(0,        // Transfer format.
                       1000000,  // SPI clock frequency.
                       0,        // SPI clock polarity.
                       1);       // SPI clock edge.
-    if(status != 1)
+    if(status != 0)
     {
         return status;
     }
@@ -269,7 +269,7 @@ unsigned char ST7579_Init(void)
  * @param yPosition - Y address of RAM.
  * @param xPosition - X address of RAM.
  * @param character - The character.
- * @param bigFont - Big font selection.
+ * @param bigFont   - Big font selection.
  *
  * @return None.
 *******************************************************************************/
@@ -337,8 +337,8 @@ void ST7579_Char(unsigned char yPosition,
  *
  * @param yPosition - Y address of RAM.
  * @param xPosition - X address of RAM.
- * @param string - The string.
+ * @param string    - The string.
- * @param bigFont - Big font selection.
+ * @param bigFont   - Big font selection.
  *
  * @return None.
 *******************************************************************************/
@@ -360,8 +360,8 @@ void ST7579_String(unsigned char yPosition,
  *
  * @param yPosition - Y address of RAM.
  * @param xPosition - X address of RAM.
- * @param number - The number.
+ * @param number    - The number.
- * @param bigFont - Big font selection.
+ * @param bigFont   - Big font selection.
  *
  * @return None.
 *******************************************************************************/
@@ -374,7 +374,6 @@ void ST7579_Number(unsigned char yPosition,
     unsigned char chNumber = 10;
     unsigned char chIndex  = 0;
 
-    //bigFont = 0;
     if(number < 0)
     {
         ST7579_Char(yPosition, xPosition, '-', bigFont);
@@ -409,11 +408,11 @@ void ST7579_Number(unsigned char yPosition,
 /***************************************************************************//**
  * @brief Sends a float number to ST7579 controller.
  *
- * @param yPosition - Y address of RAM.
+ * @param yPosition  - Y address of RAM.
- * @param xPosition - X address of RAM.
+ * @param xPosition  - X address of RAM.
- * @param number - The number.
+ * @param number     - The number.
  * @param resolution - Float resolution.
- * @param bigFont - Big font selection.
+ * @param bigFont    - Big font selection.
  *
  * @return None.
 *******************************************************************************/
@@ -439,7 +438,7 @@ void ST7579_FloatNumber(unsigned char yPosition,
     {
         ST7579_Char(yPosition, xPosition, '-', bigFont);
         xPosition += 6 + (bigFont * 12);
-        number *= -1;
+        display *= -1;
     }
     else
     {
@@ -458,6 +457,7 @@ void ST7579_FloatNumber(unsigned char yPosition,
                 ST7579_Char(yPosition, xPosition, '0', bigFont);
                 xPosition += 6 + (bigFont * 12);
             }
+            return;
         }
         else
         {
@@ -465,7 +465,7 @@ void ST7579_FloatNumber(unsigned char yPosition,
             xPosition += 6 + (bigFont * 12);
         }
     }
-    while(mask > display)
+    while((mask > display) && (chNumber > resolution))
     {
         mask /= 10;
         chNumber--;
@@ -493,8 +493,8 @@ void ST7579_FloatNumber(unsigned char yPosition,
  *
  * @param yPosition - Y address of RAM.
  * @param xPosition - X address of RAM.
- * @param number - The number.
+ * @param number    - The number.
- * @param bigFont - Big font selection.
+ * @param bigFont   - Big font selection.
  *
  * @return None.
 *******************************************************************************/
@@ -541,9 +541,9 @@ void ST7579_HexNumber(unsigned char yPosition,
  *
  * @param yPosition - Y address of RAM.
  * @param xPosition - X address of RAM.
- * @param image - The image array.
+ * @param image     - The image array.
- * @param width - The width of the image (pixels).
+ * @param width     - The width of the image (pixels).
- * @param height - The height of the image (pixels).
+ * @param height    - The height of the image (pixels).
  *
  * @return None.
 *******************************************************************************/

ST7579.h

@@ -57,7 +57,7 @@ void ST7579_GoTo(unsigned char yPosition,
 void ST7579_Clear(void);
 
 /*! Initializes the ST7579 controller. */
-unsigned char ST7579_Init(void);
+char ST7579_Init(void);
 
 /*! Sends a character to ST7579 controller. */
 void ST7579_Char(unsigned char yPosition,

TIME.c

@@ -0,0 +1,167 @@
+/***************************************************************************//**
+ *   @file   TIME.c
+ *   @brief  Implementation of TIME Driver for RENESAS RL78G14 Processor.
+ *   @author Dan Nechita
+********************************************************************************
+ * Copyright 2012(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+********************************************************************************
+ *   SVN Revision: $WCREV$
+*******************************************************************************/
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+#include "RDKRL78G14.h"    // RDKRL78G14 definitions.
+#include "TIME.h"          // TIME definitions.
+
+/*****************************************************************************/
+/************************** Macros Definitions *******************************/
+/*****************************************************************************/
+#define TIMER_CNT_INTERVAL      65536
+
+/*****************************************************************************/
+/************************ Variables Declarations *****************************/
+/*****************************************************************************/
+unsigned short overflowCounter = 0;
+
+/******************************************************************************/
+/************************ Functions Definitions *******************************/
+/******************************************************************************/
+
+/***************************************************************************//**
+ * @brief INTTM00 interrupt service routine.
+ *
+ * @return None.
+*******************************************************************************/
+#pragma vector = INTTM00_vect
+__interrupt static void Timer0InterruptHandler(void)
+{
+    overflowCounter++;
+}
+
+/***************************************************************************//**
+ * @brief Initializes the timer used in this driver.
+ *
+ * @return status - Result of the initialization procedure.
+ *                  Example:  0 - if initialization was successful;
+ *                           -1 - if initialization was unsuccessful.
+*******************************************************************************/
+char TIME_Init(void)
+{
+    PER0   |= 0x0001;   // Enable Supply for Unit 0 that contains timers 0..7.
+    TT0    |= 0x0001;   // Stop channel 0(Timer 0).
+    TPS0    = 0x0005;   // CK00 = FCLK / 32.
+    TMR00  |= 0x0000;   // CK00 input clock for channel 0.
+    TMMK00  = 1;        // Disable INTTM00 interrupt.
+    TMIF00  = 0;        // Clear INTM00 interrupt flag.
+    /* Set INTTM00 low priority */
+    TMPR100 = 1;
+    TMPR000 = 1;
+    /* Configure channel 0 as a interval timer. */
+    TMR00  |= 0x0000;   // Interval timer mode.
+    TO0    &= ~0x0001;  // Timer 0 output value is "0".
+    TOE0   &= ~0x0001;  // Disable output of timer 0.
+    TMMK00  = 0;        // Enable INTTM00 interrupt.
+    
+    return 0;
+}
+
+/***************************************************************************//**
+ * @brief The timer begins to count in steps of microseconds(us) until the user
+ *        calls a stop measurement function.
+ *
+ * @return None.
+*******************************************************************************/
+void TIME_StartMeasure(void)
+{
+    TDR00  = 0xFFFF;
+    overflowCounter = 0;
+    TS0   |= 0x0001;    // Start timer 0.
+    TMIF00 = 0;         // Clear INTM00 interrupt flag.
+}
+
+/***************************************************************************//**
+ * @brief Stops the measurement process when the functions is called.
+ *
+ * @return Time(in microseconds) elapsed since the measurement began.
+*******************************************************************************/
+unsigned long TIME_StopMeasure(void)
+{
+    unsigned long  elapsedUs = 0;
+    unsigned short timerCnt  = 0;
+    
+    timerCnt  = TCR00;
+    TT0      |= 0x0001;   // Stop Timer 0.
+    TMIF00    = 0;        // Clear INTM00 interrupt flag.
+    overflowCounter = 0;
+    elapsedUs =  ((unsigned long)overflowCounter * TIMER_CNT_INTERVAL) + 
+             (0xFFFF - timerCnt);
+    
+    return elapsedUs;
+}
+
+/***************************************************************************//**
+ * @brief Creates a delay of microseconds.
+ *
+ * @return None.
+*******************************************************************************/
+void TIME_DelayUs(unsigned short usUnits)
+{
+    TDR00 = usUnits;
+    TS0  |= 0x0001; // Start timer 0.
+    while(!overflowCounter)
+    {
+        ;
+    }
+    overflowCounter = 0;
+    TT0  |= 0x0001; // Stop Timer 0.
+}
+
+/***************************************************************************//**
+ * @brief Creates a delay of milliseconds.
+ *
+ * @return None.
+*******************************************************************************/
+void TIME_DelayMs(unsigned short msUnits)
+{
+    TDR00 = 0x3E7;  // 0x3E7 = 999(decimal). Timer will count down to 0.
+    TS0  |= 0x0001; // Start timer 0.
+    while(overflowCounter < msUnits)
+    {
+        ;
+    }
+    overflowCounter = 0;
+    TT0  |= 0x0001; // Stop Timer 0.   
+}

TIME.h

@@ -0,0 +1,65 @@
+/***************************************************************************//**
+ *   @file   TIME.h
+ *   @brief  Header file of TIME Driver for RENESAS RL78G14 Processor.
+ *   @author Dan Nechita
+********************************************************************************
+ * Copyright 2012(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+********************************************************************************
+ *   SVN Revision: $WCREV$
+*******************************************************************************/
+#ifndef __TIME_H__
+#define __TIME_H__
+
+/******************************************************************************/
+/************************ Functions Declarations ******************************/
+/******************************************************************************/
+
+/*! Initializes the timer used in this driver. */
+char TIME_Init(void);
+
+/*! The timer begins to count in steps of microseconds(us) until the user calls 
+    a stop measurement function. */
+void TIME_StartMeasure(void);
+
+/*! Stops the measurement process when the functions is called. */
+unsigned long TIME_StopMeasure(void);
+
+/*! Creates a delay of microseconds. */
+void TIME_DelayUs(unsigned short usUnits);
+
+/*! Creates a delay of milliseconds. */
+void TIME_DelayMs(unsigned short msUnits);
+
+#endif /* __TIME_H__ */