mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-08-15 00:29:02 +00:00
Fixes to README.md instructions
This commit is contained in:
parent
913ef068be
commit
a627a54224
@ -63,7 +63,16 @@ Software Requirements
|
||||
The following software are needed:
|
||||
|
||||
* ST port of Contiki for STM32 Nucleo and expansion boards.
|
||||
>The port is installed automatically when the Contiki repository is cloned.
|
||||
>The port is installed automatically when both the Contiki and the submodule repository are cloned: the former hosts the Contiki distribution and the ST platform interface, the latter hosts the actual library.
|
||||
The following commands are needed to download the full porting:
|
||||
|
||||
git clone https://github.com/STclab/contiki.git (*)
|
||||
cd contiki/
|
||||
git checkout stm32nucleo-spirit1 (*)
|
||||
git submodule init
|
||||
git submodule update
|
||||
(*): required only if using the STclab GitHub repository, these steps won't be needed once the Pull Request will be accepted
|
||||
|
||||
The platform name is: stm32nucleo-spirit1
|
||||
|
||||
* A toolchain to build the firmware: The port has been developed and tested with GNU Tools
|
||||
@ -131,7 +140,6 @@ This jumper provides the required voltage to the devices on the board.
|
||||
5. Program the firmware on the STM32 Nucleo board.
|
||||
This can be done by copying the binary file on the USB mass storage that is
|
||||
automatically created when plugging the STM32 Nucleo board to the PC.
|
||||
On Linux machines the serial port device is located in /dev/ttyACMx (x depends on the PC).
|
||||
|
||||
6. Reset the MCU by using the reset button on the STM32 Nucleo board
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user