mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-08-27 16:28:56 +00:00
Updated instructions
This commit is contained in:
parent
5a544c2c8a
commit
b5241dc609
@ -4,7 +4,7 @@ available in the handouts/ directory and at the Contiki website:
|
|||||||
|
|
||||||
http://www.sics.se/contiki/
|
http://www.sics.se/contiki/
|
||||||
|
|
||||||
* INSTALLATION
|
* INSTALLATION INSTRUCTIONS
|
||||||
|
|
||||||
Cygwin and Java (JRE) needs to be installed. The demo has been tested
|
Cygwin and Java (JRE) needs to be installed. The demo has been tested
|
||||||
on Microsoft Windows, but probably works under Linux too.
|
on Microsoft Windows, but probably works under Linux too.
|
||||||
@ -36,6 +36,15 @@ Step 7: Upload Contiki to the node:
|
|||||||
|
|
||||||
make upload-node-42
|
make upload-node-42
|
||||||
|
|
||||||
|
This takes some time. The red LED should be lit when the
|
||||||
|
uploading is finished. We have found that in some cases brand
|
||||||
|
new Tmote Sky boards seem to cause a problem with Contiki and
|
||||||
|
the red LED does not light up. If so, try to wait a few
|
||||||
|
minutes (~10 minutes) with the Tmote Sky either inserted in
|
||||||
|
the PC, or powered with batteries. If the red LED goes on
|
||||||
|
after these minutes, repeat the "make upload-node-XX" to
|
||||||
|
upload Contiki again.
|
||||||
|
|
||||||
Step 8: Remove the Tmote Sky from the PC.
|
Step 8: Remove the Tmote Sky from the PC.
|
||||||
|
|
||||||
Step 9: Insert batteries into the Tmote Sky. The red LED should light
|
Step 9: Insert batteries into the Tmote Sky. The red LED should light
|
||||||
@ -45,7 +54,7 @@ Step 10: Repeat step 6 to step 9 for all non-sink nodes. Replace "make
|
|||||||
upload-node-42" with "make upload-node-43", "make
|
upload-node-42" with "make upload-node-43", "make
|
||||||
upload-node-44", and so on.
|
upload-node-44", and so on.
|
||||||
|
|
||||||
Step 11: Insert the sink node to the PC
|
Step 11: Insert the sink node to the PC again.
|
||||||
|
|
||||||
Step 12: Run the Java program:
|
Step 12: Run the Java program:
|
||||||
|
|
||||||
@ -53,7 +62,11 @@ Step 12: Run the Java program:
|
|||||||
|
|
||||||
NOTE: this uses the first Tmote Sky it finds as a
|
NOTE: this uses the first Tmote Sky it finds as a
|
||||||
sink. Therefore, make sure that only one Tmote Sky (the sink) is
|
sink. Therefore, make sure that only one Tmote Sky (the sink) is
|
||||||
inserted.
|
inserted.
|
||||||
|
|
||||||
|
Step 13: Push the "user" button on the Tmote Skys and watch their
|
||||||
|
power consumption go up and down.
|
||||||
|
|
||||||
|
|
||||||
* DEMO DESCRIPTION
|
* DEMO DESCRIPTION
|
||||||
|
|
||||||
|
Loading…
Reference in New Issue
Block a user